hello guys., still no way to use the wizard as flashlight? tnx in advance, -storm
Is this what you want?
http://www.vijay555.com/index.php?Releases:VJCandela
Be careful with it though. I've heard people have ruined the camera flash by over using this. Vijay555 has even modified the page to say it will damage your flash led...
Personally I just set my screen to not go off for 2 minutes, and that works as a really bright flashlight Sure, uses more power, but I"M not using it for long periods of time usually.
thanks but this isn't working for the wizard
i know vj was at working about this some months ago but i didn't receive any news about it.....so i'm guessing still no way to use our lovely wizard as torch
stormwind said:
thanks but this isn't working for the wizard
i know vj was at working about this some months ago but i didn't receive any news about it.....so i'm guessing still no way to use our lovely wizard as torch
Click to expand...
Click to collapse
I just use the screen as a flashlight.
--M
yeah but have u tried the flash? it's simply amazing and light 200 times the normal display even with just white screen!
hope they will find a solution too!!
stormwind said:
yeah but have u tried the flash? it's simply amazing and light 200 times the normal display even with just white screen!
hope they will find a solution too!!
Click to expand...
Click to collapse
It always amazes me what kind of needs people have! The WIZ makes a quite expensive flashlight. Every key chain pocket flash light has better light and is more handy to use!
...keep The World In One! (qtek)
Related
Is there a way to stop/disable the flashing lights, particularly the one on the right hand side of the unit?
...my wife hates them flashing and I cannot keep the device in the bedroom at night!!!
Easy one this to solve, move the wife out of the bedroom
I have been looking for a long time for registry hack or a button to disable her alltogether, or to the very least turn off the Voice/sound function, but to date I could not figure it out!!!
Is there anyone out there who can help. I am sure there are millions of men who would be willing to pay for the solution.
My god yes, im so glad im not the only one the wife goes mental with the falshing lights at night
Why not use an indellible marker to paint them out, or for a less "permanent" solution, use a couple of pieces of black insulation tape?
Cheers,
Steve.
put it in a thick winter sock to hide the flash?
Tweaks2k2 was always good at this, unfortunatly it doesn't support turning the LEDs off on the Universal yet.
I'm sure it will only be a matter of time though.
brnoblade said:
Easy one this to solve, move the wife out of the bedroom
Click to expand...
Click to collapse
By far the best solution. LOL
Ant
The wife cant moan at me as her phone is a samsung e720 which has a really strong blue screen glow.
Anyway if she does moan I wont let her use it in bed when she wants to check her ebay :wink:
Put it on charge, noticed last night that lights stop flashing and only orange charge light comes on and does not flash while on charge.
Regards
gooroo said:
Put it on charge, noticed last night that lights stop flashing and only orange charge light comes on and does not flash while on charge.
Regards
Click to expand...
Click to collapse
The bluetooth light still flashes though :wink:
Then disable bluetooth
"HKEY_LOCAL_MACHINE\Drivers\Builtin\AllLEDMgr" should be the control strings for the LEDs
Try to change something there
BalooDK is correct.
Whilst doing some research for VJElectrify yesterday, I came across this aswell.
I really don't recommend it, but navigate to
"HKEY_LOCAL_MACHINE\Drivers\Builtin\AllLEDMgr"
and rename the dll value "AllLEDMgr.dll" to "AllLEDMgr.dllVJ".
Ensure the value has been set and soft reset. Ta da! No leds.
However, highly unrecommended since you can't tell when bluetooth is on.
Obviously rename to original name to reverse this effect.
There are other less invasive ways to achieve this, but this seems to work well.
NOTE I strongly recommend you export this registry branch before modifying it. You can cause problems in this area of the registry by accident. It's also easier to just import back the old settings when the wife is out of sight!
V
I tried editing above registry value and the lights stoped.
But after a while ... The lights start flashing again ...
I really really don't understand how.
Then I tried to delete the whole "DLL" Value. After a soft reset, the lights where gone. But again back after a while ...
How is this possible. Does WM5.0 have ARR? (Automatic Registry Rebuilder
P.S. Where is the .dll in explorer? Not in my Windows or system dir.
Need to make VJSTFU-woman One day...
V
brnoblade said:
Is there anyone out there who can help. I am sure there are millions of men who would be willing to pay for the solution.
Click to expand...
Click to collapse
Hey!
me and vijay555 are trying to solve the wife problem very hard, for some time now...
It seems, that at first, the project should be renamed to "Kill wife" instead of "Kill lights".
There seems to be a solution for that...
buzz
Try applying the Gucci_HandBag_v0.5 patch. I find that it provides a temporary solution.
However, as Buzz says, we've found better results by twisting her display area back on itself a couple of times. Her buttons will seem to light up, but the rest of the unit will provide adequate functionality without the irrating bugs. Just don't forget to enable the HKLU > IHaveAnAlibi registry setting first :wink:
V
Hi there y'all,
my xda neo / Prophet is always blinking green while he has got an telephone-connection with my provider and i hate that blinkin light, especially in my bedroom.
Has anyone got an idea how to disable this? Is there any possibility via Registry?
Thanks for any help!
a piece of black tape perhaps?
Try
HKLM\Drivers\BuiltIn\AllLEDMgr\Index
change the value to 0
__________________
I used LED Toggle which I attached. It works fine.
You do have to watch out though: disconnect your phone from power or your computer before you activate it. Using it once stops the light and using it again turns it back on.
It looks like the effect is gone after a softreset.
And another thing: some hours after using it my phone didn't respond at all for a few minutes. The only solution was a soft reset. This has happened several times now and when I keep the light on it seems to be working normal again. I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Jayxz said:
I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Click to expand...
Click to collapse
Thanks Jay, your little program works perfect. I'll see if i'll get the same problem and report it here
niketkumar, thanks for your help. I first try Jays Software, if i get the same problems i'll use your registry hack.
Thanks to both of you from my girlfriend, too - cause now it's less greener in our bedroom
So? Any news?
I stopped using the software and my phone hasn't crashed once. How's yours behaving?
Had the exact same problem, when using LED Toggle my device occasionally hangs. Since I stopped using it everything works just fine..
Man, that just sucks. I was so happy to be rid of that stupid light.
Now about that registry hack. I can find everything up to "\builtin" but the rest (AllLEDMgr\Index) doesn't exist. Do I have to create a new folder with an index file which has the value set to 0 or what?
Don't remember if I've tried the registry hack mentioned above, but I followed the thread about this issue in Modaco and tried numerous registry hacks before ending up with the only solution (that I'm aware of) that currently seems to work.
Which, unfortunately is the LED Toggle attached above, which in hand makes your device quite unstable..
So, back to the drawing board guys - hope someone finds a solution!
Just checked the corresponding thread on Modaco (http://www.modaco.com/index.php?showtopic=243948&st=0) and indeed this solution is not working flawlessly on our beloved Prophets..
Why not just place it face down on your dresser at night?
this has to be one of the dumbest hack request on the site!!! do as blunt man said and put it face down if it's that annoying!
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
maybe you just don't understand it
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
this has to be one of the dumbest comments i ever got in an professionals-board.
Jayxz, any of the workarounds i found generated problems so i just painted the light black. Not really the best solution but it sucked so badly
I find the green light annoying too, but i'd still like to have the orange warning when i received a msg or missed a call....
I hope that somebody could find a working solution for this
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
seneca said:
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
Click to expand...
Click to collapse
i tried this one but a taskmanager shows that ~10% cpu-usage is caused by this tool
enabling led blinking
Hi to All,
my HTC TYTN II always blinking green while he has got on phone-connection with my provider, and i love that. But now i have xperia and...no blinking on phone connection. It is possible to made it blinking when phone connection with provider is on
I have installed bepe 0.65 and noticed that my GPS led flashes orange and not blue.
The led flashes blue when I reboot but maybe it is the bluetooth. Any way to change it to blue by editing the registry or similar?
Thanks.
It's supposed to be orange!
I know it is supposed to be orange but prefer it blue like in my P3300.
Nueled does not work.
ghiatti1 said:
I know it is supposed to be orange but prefer it blue like in my P3300.
Nueled does not work.
Click to expand...
Click to collapse
Only if you can used soldering iron.
It hardware feature.
Why a hardware feature if it can flash blu when using BT?
Not so easy cuz it's just 1 tri-color led.
Anyway BlueTooth = blue led
GPS = orange led
WiFi = green led
ghiatti1 said:
I know it is supposed to be orange but prefer it blue like in my P3300.
Nueled does not work.
Click to expand...
Click to collapse
No offence but why the f*ck would you care if the LED colour is orange when you are using the GPS ? I assume the screen with the roadmap is more important then the colour of the LED ?
Again, sorry for the f word but come on what a question
What's the point of adding such comments to a thread? If you are not interested texarcana, just skip it.
One of the good things of HTC devices is the possibility to adapt the pda to your tastes and needs, and I like the LED to be blu, just like my P3300. So please leave it, unless you have some constructive proposals to make.
I want a white LED
i actually somewhat agree with texarcana, odd request. anyways, i did see software out there to set what the color of the light should be for different functions. the software was for the kaiser if i'm not mistaken (don't quote me). and i never tried it, i only saw it. i'm sure if you do a search on this forum or on google you will find it.
check out this thread:
http://forum.xda-developers.com/showthread.php?t=371391
i haven't personally tried it but I think it's what you were looking for. i think there was another app out there as well that also did this. try a search.
Yes I know it's an odd question but... it's possible to simply switch off that damned xmas tree of leds?
Yes, I prefere darkness...
ghiatti1 said:
I like the LED to be blu, just like my P3300.
Click to expand...
Click to collapse
Dude, your memory is playing tricks on you. P3300 LEDs were the same as TC.
i don't know. check out those links and see if the software works. i'm not sure what the software's compatibility is with the Cruise, so you might want to read up on that a bit first before trying it. you really would hate to HR your device over some LEDs.
Hello to ya all,greetings and respect
I have a ORANGE SPV M5000 for some 9 months now or so,i bought it new decoded from some other network,and i'm very very happy and satisfied with it and all the software that comes on regular basis for it
But when i bought it one thing i didn't realise at all,i saw it later home but then it was too late. For refund or anything ofc. I got used to it for all this time but anyway i would like to know what it is,would be nice if it's fixable,but i doubt that The thing is : on the screen,there is this red vertical line from top to bottom,in the left half of the screen.it's mostly visible on black backgrounds,not so much on other colors. does anyone maybe know,is the screen ****ed up,or maybe a software mess while decoding the phone ? And if so,is it in any way fixable. At least i would be at peace,knowing why that is. On it it's the original wm5,i never had guts to try upgrade to wm 6. Cuz my fiancee lives in anither country still and i use IM+ over gprs almost 24/7 to be in touch,so i can't risk to lose that lifesaving option.
Thank you all in advance !!
PalDragan said:
Hello to ya all,greetings and respect
I have a ORANGE SPV M5000 for some 9 months now or so,i bought it new decoded from some other network,and i'm very very happy and satisfied with it and all the software that comes on regular basis for it
But when i bought it one thing i didn't realise at all,i saw it later home but then it was too late. For refund or anything ofc. I got used to it for all this time but anyway i would like to know what it is,would be nice if it's fixable,but i doubt that The thing is : on the screen,there is this red vertical line from top to bottom,in the left half of the screen.it's mostly visible on black backgrounds,not so much on other colors. does anyone maybe know,is the screen ****ed up,or maybe a software mess while decoding the phone ? And if so,is it in any way fixable. At least i would be at peace,knowing why that is. On it it's the original wm5,i never had guts to try upgrade to wm 6. Cuz my fiancee lives in anither country still and i use IM+ over gprs almost 24/7 to be in touch,so i can't risk to lose that lifesaving option.
Thank you all in advance !!
Click to expand...
Click to collapse
not sure but i guess its a problem with the screen, you should check the cables that connect the screen to the mb, maybe that fixes the problem...
the_fish said:
not sure but i guess its a problem with the screen, you should check the cables that connect the screen to the mb, maybe that fixes the problem...
Click to expand...
Click to collapse
Thank you for your very very fast reply. As soon as i saw it,i opened my PPC carefully and checked there the connector stuff,but with no changes,so at least i know it is not that. Thank you very much again for your quick help
First time opening,but very easy to open the PPC,not tricky at all like it was on my old SE P800,almost breaking it while opening
So i guess,maybe the screen is defected,but it was new and like that from the first day,so maybe the only thing possible is flashing the UNI ? Any ideas still from anyone ?
PalDragan said:
Thank you for your very very fast reply. As soon as i saw it,i opened my PPC carefully and checked there the connector stuff,but with no changes,so at least i know it is not that. Thank you very much again for your quick help
First time opening,but very easy to open the PPC,not tricky at all like it was on my old SE P800,almost breaking it while opening
So i guess,maybe the screen is defected,but it was new and like that from the first day,so maybe the only thing possible is flashing the UNI ? Any ideas still from anyone ?
Click to expand...
Click to collapse
sorry, never had the problem, but i don't know what else could cause such a fault...
And still
And still after so much time,i have the red line
Nothing changed,only that in the meantime i flashed my UNI,which til posting this the first time i didn't do. I flashed the UNI i think 50 times since then
But still i am curious,if maybe anyone has an idea what that can be and is it fixable.
I have been searching for a couple of days now and cannot find any information about this, so I'm hoping someone has an idea.
I caught a glimpse of a friend's Nokia N95 a few days ago and noticed it showed the time on the LCD while the phone was locked. I find myself unlocking my Touch HD constantly to check the time so I'd find something like this very useful.
Obviously it would need to be dim as to not waste too much battery power.
Has anyone seen anything like this for the Touch HD?
FuLLm0On said:
I have been searching for a couple of days now and cannot find any information about this, so I'm hoping someone has an idea.
I caught a glimpse of a friend's Nokia N95 a few days ago and noticed it showed the time on the LCD while the phone was locked. I find myself unlocking my Touch HD constantly to check the time so I'd find something like this very useful.
Obviously it would need to be dim as to not waste too much battery power.
Has anyone seen anything like this for the Touch HD?
Click to expand...
Click to collapse
A few options, my personal favourite being LockMeLite V1.3 which display date/time/sms notification though there is plenty of other apps out there. Duttys latest WM6.5 rom has a similar app pre-installed which also displays date/time/sms notification