activesync doesn't work.. even after hard reset.. i have italian rom and i want an english one. how can i update rom without activesync.. pls help
tx in advance
Enter into bootloader. Use search [email protected]#$
i searched... :-s.. give me a link pls..
i need a step by step tutorial .. it's the first time i do this
Plug in USB cable. Hold voice recorder button and press reset button. Bootloader will appear (Three color stripes). Then you may flash up ROM. (This works only for RUU installation types, not for PDAmobiz modified installator) Original english HTC P3300 ROM you may download form here: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades .
no connection beetween the ppc and pc... i use a mini usb cable? is that why it's not working?
win xp sp2 on the pc.. do i need drivers?
K-D said:
no connection beetween the ppc and pc... i use a mini usb cable? is that why it's not working?
win xp sp2 on the pc.. do i need drivers?
Click to expand...
Click to collapse
This may be a stupid question, but do you have ActiveSync installed on your pc?
If not than that's the reason it won't work.
If you have ActiveSync installed you should check this:
ActiveSync Check in Settings - Connections - USB to PC that the USB advanced network functionality is not ticked.
i have activesync installed.. tried that too..... but when i plug the usb cable.. shouldn't i hear the specific sound on the pc when a device is detected? (the sound is not disabled.. i hear it when i plug the bt adaptor.. )
K-D said:
i have activesync installed.. tried that too..... but when i plug the usb cable.. shouldn't i hear the specific sound on the pc when a device is detected? (the sound is not disabled.. i hear it when i plug the bt adaptor.. )
Click to expand...
Click to collapse
This often happens - try reinstalling activesync and rebooting pc. Or you can do it via bootloader mode - you don't need activesync for this way. If you are going to flash a different language rom your device must be cid unlocked or you will brick it.
it dowsn't work in bootloader mode either...
btw.. how do i unlock it?
K-D said:
it dowsn't work in bootloader mode either...
btw.. how do i unlock it?
Click to expand...
Click to collapse
Use imei check.co.uk - costs around 20 pounds - don't even consider flashing with a diff country rom before doing this. There maybe a problem with your pc - try a different one if you can. Also update to v 4.5 of activesync if you have not done already.
allready have v4.5, allready tried on other pc.. i guess i'll have to get used to italian...
K-D said:
allready have v4.5, allready tried on other pc.. i guess i'll have to get used to italian...
Click to expand...
Click to collapse
You need to sort out why your device is not activesyncing with the pc's - do they both have firewalls? If so try disabling them and for good measure turn off antiviral scanner and try again.
nope.. it's not the firewall.. i tried without it too..
what port is the ppc using for usb connection?
It maybe the usb cable that is faulty - have you another you can try
the cable works with my camera and it charges the phone..
is there an english language interface pack for wm5?
K-D said:
is there an english language interface pack for wm5?
Click to expand...
Click to collapse
Sorry no such thing - i would still try another cable - Which pc's did you try - i.e. do they have the same configuration of diff?
Did you try bootloader mode? - when you attach to pc - a little usb should show in bottom left corner to show you are connected (activesync not needed)
meschle said:
Sorry no such thing - i would still try another cable - Which pc's did you try - i.e. do they have the same configuration of diff?
Did you try bootloader mode? - when you attach to pc - a little usb should show in bottom left corner to show you are connected (activesync not needed)
Click to expand...
Click to collapse
i tried that too.. nothing happens.. i tried on three differnt configurations..
what about romanian language interface pack?
K-D said:
what about romanian language interface pack?
Click to expand...
Click to collapse
Diff language = diff rom so you still have the same problem.
Did you say you tried a new cable? if your device won't connect to pc at all via usb then I suggest you have a faulty device and it needs to be replaced / fixed
Related
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
relax man!go to settings-connections-usb to pc and NO enable advanced network functionality
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
TRY FIRST S_WIND...
Don't worry ! Rom and device are ok!
Have you tried to make an Hard reset? If you don't , try now and let us know.
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
have you tried restarting your PC??
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
imdantes said:
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Click to expand...
Click to collapse
Done, still the same, no response...
vincent85 said:
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
Done, still the same, no response...
Click to expand...
Click to collapse
Probably during the update procedure some files have corrupted , please wait , i search solution...
Download this program : http://wiki.xda-developers.com/uploads/mtty.exe ,
DISABLE USB PORT FROM ACTIVESYNC, PUT DEVICE IN BOOTLOADER AND START MTTY , NO SELECT COM , AT THE END OF COM MENU , YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Now , remember to reable usb connection in activeSync and try synchronisation , if doesn't work , reflash the rom.
This procedures , should be erase corrupted files.
let us know.
imdantes
P.S. Format also the sd card
YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Click to expand...
Click to collapse
How do i type those? i pick USB and click OK, then the message showed up "USB PORT CAN NOT OPEN" !
i think the phone usb is not working. When i install WM5TORAGE and try to use the mass store option the computer don't pick the connection...
are there any change to fix this problems?
..........anyone?
your problem same as my.but i didint flash any rom .it original rom from dopod .it suddenly cant sync to my pc.
anyone know how to fix ??....pls give us a hand tq .
Dear all
I try to update my PPC 6600 from WM2003 2nd edition to WM6. I download and run WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT). After I try to finish the last step of the installation which is to cool reset the PPC, there are 4 color bands and only show "NO GSM", "D 5.70.11 WWE". I try to turn it off, but doesn't work. I try to connect back to PC, but PC can not find this device
Please help
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
imatrix said:
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
Click to expand...
Click to collapse
I have tried, but not work, no format, no reset, stay the same
here is the message from the program. please help
USB>
USB>set 14 0
HTCST ÚÈHTCEUSB>set 14 0
HTCST ÚÈHTCEUSB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=EA0000
All:dwSize=1F20000
USB>task 0
USB>
I am very sorry, but I need help.
I am unable to fix this.
I am trying my best to follow the instructions and dont know where am i going wrong.
Like U said,
I went again with the Multi Port TTY utility and in the new USB text file window, ((stopped the wcescomm.exe application from taskbar)
I tried entering
set 14 0
USB>task 28
USB>task 0
USB>
Saved the file as USB
The phone in the cradle was still showing USB v1.02
I took the phone out of the cradle, removed the battery and inserted it back into the cradle
and i again starts showing USB v1.02
Where am i going wrong..
I also tried
USB>set 14 0
USB>task 28
USB>task 0
USB>
but in vain...
Please help in resolving this
I found http://forum.xda-developers.com/archive/index.php/t-273871.html online and the problem is almost identical as mine. Please help
i think u can flash it again
woi700 said:
i think u can flash it again
Click to expand...
Click to collapse
What do you mean flash it again?
It can not be detected by activesync
cables
Something like that happened to me a while back where i couldnt connect. The problem wasnt the BA but was the cable connections- usb cable connections. It stills happens today where i get a bad connection and i have to play around with the usb that is plugged into my laptop. Maybe you should check out how loose your usb connection is--try moving the cable around.
shazzy84 said:
Something like that happened to me a while back where i couldnt connect. The problem wasnt the BA but was the cable connections- usb cable connections. It stills happens today where i get a bad connection and i have to play around with the usb that is plugged into my laptop. Maybe you should check out how loose your usb connection is--try moving the cable around.
Click to expand...
Click to collapse
I have tried many time, but not work
reflash
get into boot loader mode, connect directly to pc with good direct usb connection, (screen should state, USB from SERIAL on connection), reflash.
ensure SD card is removed beforehand.
AbuGWM5 said:
get into boot loader mode, connect directly to pc with good direct usb connection, (screen should state, USB from SERIAL on connection), reflash.
ensure SD card is removed beforehand.
Click to expand...
Click to collapse
What do you mean reflash?
Does it mean that Reinstall the WM6, or install other OS like WM5?
However,Without activesync how can I do that?
OR reflash mean formart?
I try to fomart my ppc, but stuck in the white screen
Note: I have tried the following
http://wiki.xda-developers.com/index...UCK_AT_STARTUP
If you can get USB connection to your device, you can just try to reflash with same WM6. best of lucks.
restart your PC
Try reinstalling active sync on your PC or laptop and then shutdown your PC or laptop and then restart it. Then try connecting your BA afterwards.
shazzy84 said:
Try reinstalling active sync on your PC or laptop and then shutdown your PC or laptop and then restart it. Then try connecting your BA afterwards.
Click to expand...
Click to collapse
I did what you said, but my PC is still unable to detect my pocketPC.
In the pocketPC bootloader mode, I can see it change from serial to USB after I connect the usb bundle. What should I do?????
king2004c said:
Dear all
I try to connect back to PC, but PC can not find this device
Please help
Click to expand...
Click to collapse
try to disable windows firewall and any other firewall then try...
i have same problem my device can't connect to pc when i disable ISA firewall my ppc connected .
AddAn
addan said:
try to disable windows firewall and any other firewall then try...
i have same problem my device can't connect to pc when i disable ISA firewall my ppc connected .
AddAn
Click to expand...
Click to collapse
I have followed what you say, but still not work
I hear some people say that I can reflash the rom.
But
1. I don't know which rom they mean, my orginal one or updated one?
2. How can I get my original rom?
Someone say that if I try to connect via activesync under PPC bootloader mode, I could not see any connection in activesync, but I will hear some connection sound, then I can reflash my rom
But
1. How can I do anything if I can not see any connection in activesync
I have done what people say about using mytt1.24.
But,
What should I expect to see?
king2004c said:
Dear all
I try to update my PPC 6600 from WM2003 2nd edition to WM6. I download and run WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT). After I try to finish the last step of the installation which is to cool reset the PPC, there are 4 color bands and only show "NO GSM", "D 5.70.11 WWE". I try to turn it off, but doesn't work. I try to connect back to PC, but PC can not find this device
Please help
Click to expand...
Click to collapse
go here ftp://xda:[email protected]_1.15_Type_II/BA Radio 115 THIS WORKS.rar then use this to load your gsm extract BA Radio 115 THIS WORKS.rar somewere on your computer put your ba it to bootloader mode then put i into its craidle then run MaUpgradeUt_noID.exe wait till upgrade is done then take out of the craidle press reset button dont worry about activesync connecting
or not
update information
I tried to upgrade my win2003 2nd edition in ppc 6600 to WM6, but it seems that WM6 won't work with ppc 6600. Then,
1. I download the WM5 rom from http://wiki.xda-developers.com/index.php?pagename=Helmi
2. Try to reflash the PPC
3. I see that the PPC response
4. Try to do the reset after finished upload rom
5. Four color strip screen & "NO gps" and "5.02... WWE"
6. Try to restart again, and wait, result is the same
7. Try to go to bootloader mode, use mtty, do "set 14 0", "task 28", "task 0", PPC still keep the same. I have tried all reset, hard reset, etc
8. *** Try to reflash the PPC again, I find out that there is no current ROM when the ROM upload program try to read my current PPC condition.
PPC6600 is a CDMA device and not a GSM, so you tried to flash a wrong ROM, sorry friend.
April 1 said:
PPC6600 is a CDMA device and not a GSM, so you tried to flash a wrong ROM, sorry friend.
Click to expand...
Click to collapse
could you please tell me where I can find the corret rom?
Hello guys,
I have a problem. My p3300 does not connect through Active Sync.
Its everything oright, and with my S200its orght.
The rom is not the original, is a WM 6.1
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
How can i change the rom, without been with active sync?
I have a SD 2gb card, but i can't make a partition on it, and make a SD Flash. :S
Can anyone help me?
Thanks
de-install activesync
download and install the latest version of active sync
make sure that on the conncetions tab the USB connection is tabbed
goodluck
Hey there, and thanks,
I have already make that, and still nothing.
Reinstall the A.S. 4.5, soft reset the pda, and reconnect, restart the pc and still nothiing. :S with my S200(prophet) don't have any problem. :S
More help required :S
tnx
I have the same problem i cant sincronize the pda whith the activesync and i wish to change the rom. Now it's in france and i wish to change it to english, and it's locked to orange france i think. What can i make? It starts in bootloader, but the instalation from the card is not starting. thankx
le. and if i want to install something gives error 260
hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?
...
quick question...
does it charge?
(i know sounds daft..but...)
or have trouble charging sometimes?
it could be the pins not connecting properly on the device to usb..
*______
/ . == . I
look at device, turn it upside down, now look at the charge slot on device..
Imagine the little picture iv drawn is the charge slot on the device..
''.'' are the ''pins'' on the device..
get a pin and sprize/pull them out SLIGHTLY..
the ''pins'' are hard to see but this could be the problem..
* my p3300 stopped charging, activesync, the lot.. this is MY quick fix!
(hopefull yours too!)
lol
vrumvrum said:
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
Click to expand...
Click to collapse
just give it a try.. i now know it charges tho.lol
Yes it charges, and i tryied another pda to connect to this pc and it works fine, i changed the mini usb connector, because it was broken
mvenneker said:
hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?
Click to expand...
Click to collapse
Hello,
Yes, i tested with other pc (4 pcs in total), and the P3300(artemis) isn't recognize by Active sync, but it charges through the usb, but with my S200(prophet) don't have any kind of problem, and connect a Razr X (motorola) to test the cable to and keep working to, so the problem is in the phone.
I tried to clean the conector and all usb contacts still in place and working (have te 5 pins and they move up and down, normally)
in bootload mode it recognize by apearing in the bootom left the USB indication, but have the 260 error in everyway i try to connect the phone to pc.
any help?? :s
Thanks
...
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.
...
download this..
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx
raving_nanza said:
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.
Click to expand...
Click to collapse
Hy there, i done it more than 5 or 10 times in the 2 home pc's. and nothing.. been the same.
raving_nanza said:
download this..
microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx
Click to expand...
Click to collapse
Hi there,
I have already download the most recent version (AS 4.5), 3 times, and reeinstaled more than 5 ou 10 times, on the office pc, and home pc's.
It's still the same, no connection or syncronising :S
Don0t know more what to do.. :S
...
if that does not work, i dont know what it can be.. sorry mate, if i find out why its not connecting ill let you know..
Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie
scootie said:
Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie
Click to expand...
Click to collapse
done and nothing, it still the same.. :s
but thanx anyway
regards
Have you try Hard Reset ?
Hi,
My first post here and try to help !
Do you know how to hard reset your Artemis ? it has works for me one time with the same problem...
But you have to save ALL your data first and reinstall everything after...
(you will find in the forum if you don't know how to hard reset)
Good luck !
i don it a couple of times, with no sucess. :S
I tried to flash a new rom throught the SD Card, but with no sucess to..
i download several ones, and keep to tell that its a invalid certificate, and tried othr been from HTC, tht dont do anything, pass directly to the 3 color bar menu. nothintg more hapend.. :S
If it help.. :
Rom version Touch_AF pTG - WM6.1
radio version 02.94.90
OS: 4.1.0.7
IPL:3.13.0001
SPL.3.13.0000
Cheers
Wrong SPL I think...
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...
Castorlama said:
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...
Click to expand...
Click to collapse
Hi,
but theres my problem.. i dont have a working A.S. connection between the phone ad the pc. :s
most probably is the rom that don't communicate with the computer, because it charge, so the usb is ok. :s
ill try through Blue ttooth to syncro the Uspl, and then try to change the rom through sdflash.. i'll pray to God to this work..
I need help:
I can't sync my HD with PC to root, maybe the cabel is problem, it is working for battery charging, but when I plugin in to PC nothing happand (dosn't recodnise it)
Is there any other way to root my HD without sync it with PC? PLEASE HELP
kiretocin said:
I need help:
I can't sync my HD with PC to root, maybe the cabel is problem, it is working for battery charging, but when I plugin in to PC nothing happand (dosn't recodnise it)
Is there any other way to root my HD without sync it with PC? PLEASE HELP
Click to expand...
Click to collapse
1. Soft reset your HD & restart your PC. If not working,
2. Go to HDsettings/connections/USB to PC and un-tick "Enable faster data sync".
Maybe it will work...
Also, go to connection settings in activesync and ensure that "allow usb connections" is enabled
thanks man, but I try that a million time but dosn't work (I have expirience with rooting and flashing roms on my xperia)
it is set just like that but still dosn't working any other idea?
FIREWALL - can block comunications.
It would also help if you state your PC OS.
From ActiveSync I guess it's Windows... but which one?
And does your PC recognize HD in "disc drive mode"?
Ah... I have not heard it yet, but antivirus may be guilty here too...
i try on windows xp, i try on windows 7 but nothing happands when I plug in it in to the PC in every mode, disc drive, active sync...
and i try it with disabled firewall and my anti virus but still nothing, but usb port is working for charging the battery
i recommend for u a program its name (pim backup) its making a backup for ur contacts and calender and call history and all ur favorites things
try to search it and if i find it i will send u the link its petter 1000 times then the active sync
1. Try another USB cable
2. Try on another PC
Regarding PIM Backup I also recommend it, but it can not replace sync with Outlook...
Umm... I guess you use original HTC ROM, since you want to "root it". Which ROM?
I need active sync to root my hd not to beck up files from my phone, can this program do that?
Yes I am using original ROM version:1.14.479.3(25874)wwe
radio version:1.09.25.14
I had tryed on 3 diferent PC's everywhere is the same, but I don't have another cabel to try
and i have new problem, I lost signal of the network on my HD, my phone is dieing
NEED A HELP!
If you're having problems connecting the phone to your PC via USB, and now it's having connectivity problems to your network provider, I'd say it needs a visit to the service centre for repair.
I think that is my only solution
try to wipe device and hard retart your device
Hm, yes... if hard reset does not help, then service is the next step...
And any mini USB cable will do... I'm using one from my Olympus camera...
I try hard reset million times, still nothing... thanks guys but I think that the servis is the only solution
I have try with another usb cable, but still nothing, the problem is not in the cable...
Then it's service...
Hello all,
I have HP IPAQ 614c and i can't connect this phone with any pc or any USB cable. I get message unknown drivers... Maybe someone knows what the problem it is ? I wana install normaly ROM and firmware, but i can't connect my phone to pc... Thanks a lot who will help me to fix it...
I have the same problem with my iPAQ 914c... But, i can intall a new ROM with a external SD Card.
You can install ? I can install too ROM from HP web. But how to update Firmware without USB ? So i need connect my phone to update it... Ehh... Bored of seaches...
Yes, I can install it
Instructions for flashing (extrated from: http://forum.xda-developers.com/showthread.php?t=800558):
Download de firmware. Decompress it and you have the .dio file. Put this file into a less than 2 gb sd (sdhc won't work) and put your device in sdloader mode. This happens pressing together volumeup + ok and pressing reset releasing the two vol and ok buttons. After doing this, the device checks the file integrity, flash to your device rom and do a clean reboot. When is finished, it ahould autoreset, but if not, it will show a black screen for a long time. Is then when it has finished, so then make a reset and your device will have installed the ROM
How to update flash.dio i know. I Need english version. I have updated OS. But how to update FW ? Becouse now mine is 0.81 version. And then i upload original flash.dio from HP hexeded file. Phone installing one this file from 6 files. Like i see on screen phone, missing 5 files to install... Sorry for bad english, but i think you will understand me what i mean...
On phone i have some bugs, like xt9 in SMS mode. And bug in contacts. Can't seach contact by name, i can put only numbers there to seach. GPS not work. And other little bugs.
But main problem is how to activesync this phone ? Why PC can't find phone ( device ). Tryed anything. Different PC, different windows. Different cables. Can't find solution for it... I think must be way to find problem. HP agents can't help me, becouse warranty ended, heh. They just told me what phone port for cable can be out of working. But phone charging working well...
So who gona help me ?...
Is it possible upgrade and activesync by bluetooth ?
DeFuSeGM said:
Is it possible upgrade and activesync by bluetooth ?
Click to expand...
Click to collapse
DeFuSeGM, you are able to activesync by bluetooth, just follow the activesync help topic under connection using bluetooth. Starting i got a lot problem to setup and took me quite a while to get it solve out. U can try it.
BTW, anyone can share how fast is your bluetooth phone to phone transfer rate. Mine is only 50kb/s, seem like quite slow compare to other phone i used to use.
Thanks
And how about if i can't open bluetooth meniu in phone ? USB dont work, bluetooth dont work, with SDLOADER can't upgrade... Phone dead ? Or any way to delete wrong ROM from phone without connecting it to pc ? I need faster help...
I had the same problem on my 614c, I opened the device and re soldered the usb connector. Haven't had any problem since that.
But it requires good soldering skills.
DeFuSeGM said:
And how about if i can't open bluetooth meniu in phone ? USB dont work, bluetooth dont work, with SDLOADER can't upgrade... Phone dead ? Or any way to delete wrong ROM from phone without connecting it to pc ? I need faster help...
Click to expand...
Click to collapse
if you want to Automatically connect through ActiveSync bluetooth , you'd better learn it at http://forum.xda-developers.com/showthread.php?t=530327
Lasker1 said:
I had the same problem on my 614c, I opened the device and re soldered the usb connector. Haven't had any problem since that.
But it requires good soldering skills.
Click to expand...
Click to collapse
Okey, ill try to resold connectors.
Hakim Rahman said:
if you want to Automatically connect through ActiveSync bluetooth , you'd better learn it at http://forum.xda-developers.com/showthread.php?t=530327
Click to expand...
Click to collapse
In phone installed wrong OS. So i can't turn on bluetooth... Screen just blinking, thats all...
Can someone make picture of sync cable ? Maybe i have wrong usb cable. Becouse repairman sayd what anything with phone okey. Seems i need get corect cable. Thanks
Have changed main board and anything was okey with phone. Seems if USB dont work, you need change main board or try load ROM by SD card. But in my way i was stuck on that.
DeFuSeGM said:
Can someone make picture of sync cable ? Maybe i have wrong usb cable. Becouse repairman sayd what anything with phone okey. Seems i need get corect cable. Thanks
Click to expand...
Click to collapse
you just look at http://pinouts.ru/CellularPhonesCables/cellphone-usb-cable_pinout.shtml