Database Users

Big problem

Hi
I am new here and i have problem
When i turn on my qtek9000, i recieve message Serial V.100.
If i connect USB cable it displays USB instead of Serial.
This happened when i tried to do radio upgrade (through usb hub, sim and sd were also in phone...).
I have 1gb SD card and also card reader mounted in laptop, so transfering files should not be problem.
Can someone help me with step-by-step procedure how to make my qtek work back. I used a lot of search but i am even more confused....
I just remember that when qtek worked Radio was something like 1.0.3.1 and also WWE was writen somewhere....
Probably i should put rom to sd with ntrw (which wersion of both),.......
please help....

might be a dumb question on my part - but have you tried a reset (initially a soft one but then a hard one of course, if nothing else works...) ???
I mean you will at least be able to revert back to the condition 'out of the package'...
Hope everything works out!

jup.both things NOT HELPED

looks like you're stuck in the bootloader mode....
try flashing the rom & the radio rom once again by connecting it to your laptop's usb...
i guess something screwed up while you were upgraging your radio rom...and you'd need to redo it!
Best,
San

can you please write me a procedure?

You might want to check the following thread. Everything is well described.
Cheers
hrb
http://forum.xda-developers.com/viewtopic.php?t=32725

i am trying to download files but i get permission denied all the time

You mean you get an error when clicking this link ?
ftp://xdaupload:[email protected]/Universal
I don't understand that, it works perfectly well for me
Cheers
hrb

I have solved problem with Radio upgrade. I am in much better mood now. 8)
Anyway i have 4 more questions.
1.) I am using bluetooth car-instalation Parrot CK3100. I am wondering if is possible to transfer any other sound except telephone conversations to that device. When i had Nokia 9500 i was able to hear every single click,tone,...i made on phone also on car-instalation. I also heard nokia ringtone in car instalation.With qtek i am getting generic car-instalation ringing tone instead of phone ringing. Otherwise primary intention (hands free talking) works fine. I would like to have that to be able to hear voices from various GPS software.
2.) Since QTEK9000 is PDA and phone in single unit I would like to have in car GPS application "always on top". Like previously mentioned i can easily manage my calls with car-instalation. Therefore i would like to run Phone section in background or GPS applications on top.I hope you will understand what i would like to say
3.) I also need in-car holder for qtek. Do you have any reccomendations?
4.)
My settings:
R: 1.04.02
G: 42.37.P8
D: 1.13.64.WWE
Is that ok or should i upgrade?

Stuck in bootloader mode
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks

Re: Stuck in bootloader mode
Bauser_uk said:
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Click to expand...
Click to collapse
try it with this file -
1. put radio.nbf and the file attached below in the same folder and run the exe with ur device connected to usb in bootloader mode...
2. hope it flashes it
S

Thanks DreamTheater
Thanks for your help - unfortunately I got the same message, ie this rom is not meant for this device etc...
Will see O2 can do anything (who's that laughing...???) - was going to buy a new xda mini anyway...!

1. REMOVE your SD/MMC card.
2. Soft/hard reset.
3. Run the upgarde again.
Step 1 above solved my problem.

htc p3300 ROM update?

activesync doesn't work.. even after hard reset.. i have italian rom and i want an english one. how can i update rom without activesync.. pls help
tx in advance

Enter into bootloader. Use search [email protected]#$

i searched... :-s.. give me a link pls..
i need a step by step tutorial .. it's the first time i do this

Plug in USB cable. Hold voice recorder button and press reset button. Bootloader will appear (Three color stripes). Then you may flash up ROM. (This works only for RUU installation types, not for PDAmobiz modified installator) Original english HTC P3300 ROM you may download form here: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades .

no connection beetween the ppc and pc... i use a mini usb cable? is that why it's not working?
win xp sp2 on the pc.. do i need drivers?

K-D said:
no connection beetween the ppc and pc... i use a mini usb cable? is that why it's not working?
win xp sp2 on the pc.. do i need drivers?
Click to expand...
Click to collapse
This may be a stupid question, but do you have ActiveSync installed on your pc?
If not than that's the reason it won't work.
If you have ActiveSync installed you should check this:
ActiveSync Check in Settings - Connections - USB to PC that the USB advanced network functionality is not ticked.

i have activesync installed.. tried that too..... but when i plug the usb cable.. shouldn't i hear the specific sound on the pc when a device is detected? (the sound is not disabled.. i hear it when i plug the bt adaptor.. )

K-D said:
i have activesync installed.. tried that too..... but when i plug the usb cable.. shouldn't i hear the specific sound on the pc when a device is detected? (the sound is not disabled.. i hear it when i plug the bt adaptor.. )
Click to expand...
Click to collapse
This often happens - try reinstalling activesync and rebooting pc. Or you can do it via bootloader mode - you don't need activesync for this way. If you are going to flash a different language rom your device must be cid unlocked or you will brick it.

it dowsn't work in bootloader mode either...
btw.. how do i unlock it?

K-D said:
it dowsn't work in bootloader mode either...
btw.. how do i unlock it?
Click to expand...
Click to collapse
Use imei check.co.uk - costs around 20 pounds - don't even consider flashing with a diff country rom before doing this. There maybe a problem with your pc - try a different one if you can. Also update to v 4.5 of activesync if you have not done already.

allready have v4.5, allready tried on other pc.. i guess i'll have to get used to italian...

K-D said:
allready have v4.5, allready tried on other pc.. i guess i'll have to get used to italian...
Click to expand...
Click to collapse
You need to sort out why your device is not activesyncing with the pc's - do they both have firewalls? If so try disabling them and for good measure turn off antiviral scanner and try again.

nope.. it's not the firewall.. i tried without it too..
what port is the ppc using for usb connection?

It maybe the usb cable that is faulty - have you another you can try

the cable works with my camera and it charges the phone..

is there an english language interface pack for wm5?

K-D said:
is there an english language interface pack for wm5?
Click to expand...
Click to collapse
Sorry no such thing - i would still try another cable - Which pc's did you try - i.e. do they have the same configuration of diff?
Did you try bootloader mode? - when you attach to pc - a little usb should show in bottom left corner to show you are connected (activesync not needed)

meschle said:
Sorry no such thing - i would still try another cable - Which pc's did you try - i.e. do they have the same configuration of diff?
Did you try bootloader mode? - when you attach to pc - a little usb should show in bottom left corner to show you are connected (activesync not needed)
Click to expand...
Click to collapse
i tried that too.. nothing happens.. i tried on three differnt configurations..

what about romanian language interface pack?

K-D said:
what about romanian language interface pack?
Click to expand...
Click to collapse
Diff language = diff rom so you still have the same problem.
Did you say you tried a new cable? if your device won't connect to pc at all via usb then I suggest you have a faulty device and it needs to be replaced / fixed

Unable to Syn with PC after upgrade ausdim's Rom!

Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.

vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
relax man!go to settings-connections-usb to pc and NO enable advanced network functionality

vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
TRY FIRST S_WIND...
Don't worry ! Rom and device are ok!
Have you tried to make an Hard reset? If you don't , try now and let us know.

I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....

vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
have you tried restarting your PC??

vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know

Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
imdantes said:
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Click to expand...
Click to collapse
Done, still the same, no response...

vincent85 said:
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
Done, still the same, no response...
Click to expand...
Click to collapse
Probably during the update procedure some files have corrupted , please wait , i search solution...

Download this program : http://wiki.xda-developers.com/uploads/mtty.exe ,
DISABLE USB PORT FROM ACTIVESYNC, PUT DEVICE IN BOOTLOADER AND START MTTY , NO SELECT COM , AT THE END OF COM MENU , YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Now , remember to reable usb connection in activeSync and try synchronisation , if doesn't work , reflash the rom.
This procedures , should be erase corrupted files.
let us know.
imdantes
P.S. Format also the sd card

YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Click to expand...
Click to collapse
How do i type those? i pick USB and click OK, then the message showed up "USB PORT CAN NOT OPEN" !

i think the phone usb is not working. When i install WM5TORAGE and try to use the mass store option the computer don't pick the connection...
are there any change to fix this problems?

..........anyone?

your problem same as my.but i didint flash any rom .it original rom from dopod .it suddenly cant sync to my pc.
anyone know how to fix ??....pls give us a hand tq .

Done all, can´t syncronize!!! Help

Hello to everybody!
After all I have to say that this is a fantastic forum for users of Qtek S200 (Prophet). I bought one last week and started to see what I could do. Therefor... I'm a newbie
This is my first thread, hope that some one can help.
After trying to understand the world of Prophet, I first changed the ROM to an official Qtek ROM.
Now I what to sincronize with my PC to transfer photos and put some software and apps in the card. Like I read here, I downloaded the activesync from microsoft site, instaled it and plugged the cable to my pda. Nothing happened. Than I went to activesync connections enabled USB connection and tapped in connect. After a search, the pda was simply not found. Even after turning down de AntiVirus and Firewall, nothing happened.
What happened? I have to do something in the PDA? Couldn't find that info in here.
Thank's in advance for the help
Heurd

Does the LED in the speaker at the top change to orange?
Does the computer react at all? (any sounds etc.)
If not, try putting the device into bootloader: Press and hold the COMM button and then soft reset, and then plug it into your computer and see if anything at all happens.
If nothing happens, the USB cable is damaged. If the computer responds when the device is in bootloader but not when it is in, the ROM may not have the required software installed in it.

Hi,
Yes, the Led turns orange. I can charge the battery with that cable. But i also read that it's possible in some cases to charge but the part to syncronize can be damaged!!!
But what really intregues me is that I used that cable to put the ROM that I have. Supposedly it's a Qtek official ROM, i don't know if you can conclude something with this:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.29
In PDA appears the active sync icon and tapping it only appears a window that says to install AS in PC and connect. So I suppose that it has something.
thanks to l3v5y for the sugestion... I will try and than post here what happened.
does anyone has anymore suggestions... I will try everything to put this at work.

In PDA appears the active sync icon and tapping it only appears a window that says to install AS in PC and connect. So I suppose that it has something.
Click to expand...
Click to collapse
This seems to say you haven't successfully installed Active Sync. Try restarting your computer and seeing if it works then.

l3v5y said:
This seems to say you haven't successfully installed Active Sync. Try restarting your computer and seeing if it works then.
Click to expand...
Click to collapse
That is surelly not the problem because I installed AS 4.5, restarted the computer more than once, removed that and reinstalled and nothing... I even had put de AS 4.2 to try and see if it worked - nothing.
Now I'm not in my computer... I will try what you suggested when I go home.

I think it may be something to do with the USB cable...

Had that problem a while ago, my solution was to reinstall windows xp and it worked. so backup your pc, format your hard drive and then install the os (windows xp/vista). i guess it was usb-driver related.

REALLY
Unbelieveble...
well, It's easier to try in another pc before formatting mine. I'm not in the mood (too much time to put like I like)
That way I will check and see if my cable and ROM are allright.
Thanks for the tip croco_64
Hope to tomorrow come in here and wright that it's everything ok

Hi there!
Well... I've tried what you proposed. It is probably a problem of the cable. I tried with a cable of a digital camera and finally the computer detected the phone (with mine it only went orange light in the top, but never recognized - despite I changed the ROM with it ). However it gives an error - the instalation is not complete!!! I went to device manager in the PC and there was a yellow (!) in the windows mobile device.
Is it of the cable!? Do the cable have to have specific properties to sync the pda and the pc? The camera cable isn't enough?
yes... I had put activesync 4.5 in the PC!!!
thanks again for the help

Active Sync Problem

Hello guys,
I have a problem. My p3300 does not connect through Active Sync.
Its everything oright, and with my S200its orght.
The rom is not the original, is a WM 6.1
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
How can i change the rom, without been with active sync?
I have a SD 2gb card, but i can't make a partition on it, and make a SD Flash. :S
Can anyone help me?
Thanks

de-install activesync
download and install the latest version of active sync
make sure that on the conncetions tab the USB connection is tabbed
goodluck

Hey there, and thanks,
I have already make that, and still nothing.
Reinstall the A.S. 4.5, soft reset the pda, and reconnect, restart the pc and still nothiing. :S with my S200(prophet) don't have any problem. :S
More help required :S
tnx

I have the same problem i cant sincronize the pda whith the activesync and i wish to change the rom. Now it's in france and i wish to change it to english, and it's locked to orange france i think. What can i make? It starts in bootloader, but the instalation from the card is not starting. thankx
le. and if i want to install something gives error 260

hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?

...
quick question...
does it charge?

(i know sounds daft..but...)
or have trouble charging sometimes?
it could be the pins not connecting properly on the device to usb..
*______
/ . == . I
look at device, turn it upside down, now look at the charge slot on device..
Imagine the little picture iv drawn is the charge slot on the device..
''.'' are the ''pins'' on the device..
get a pin and sprize/pull them out SLIGHTLY..
the ''pins'' are hard to see but this could be the problem..
* my p3300 stopped charging, activesync, the lot.. this is MY quick fix!
(hopefull yours too!)

lol
vrumvrum said:
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
Click to expand...
Click to collapse
just give it a try.. i now know it charges tho.lol

Yes it charges, and i tryied another pda to connect to this pc and it works fine, i changed the mini usb connector, because it was broken

mvenneker said:
hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?
Click to expand...
Click to collapse
Hello,
Yes, i tested with other pc (4 pcs in total), and the P3300(artemis) isn't recognize by Active sync, but it charges through the usb, but with my S200(prophet) don't have any kind of problem, and connect a Razr X (motorola) to test the cable to and keep working to, so the problem is in the phone.
I tried to clean the conector and all usb contacts still in place and working (have te 5 pins and they move up and down, normally)
in bootload mode it recognize by apearing in the bootom left the USB indication, but have the 260 error in everyway i try to connect the phone to pc.
any help?? :s
Thanks

...
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.

...
download this..
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx

raving_nanza said:
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.
Click to expand...
Click to collapse
Hy there, i done it more than 5 or 10 times in the 2 home pc's. and nothing.. been the same.
raving_nanza said:
download this..
microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx
Click to expand...
Click to collapse
Hi there,
I have already download the most recent version (AS 4.5), 3 times, and reeinstaled more than 5 ou 10 times, on the office pc, and home pc's.
It's still the same, no connection or syncronising :S
Don0t know more what to do.. :S

...
if that does not work, i dont know what it can be.. sorry mate, if i find out why its not connecting ill let you know..

Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie

scootie said:
Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie
Click to expand...
Click to collapse
done and nothing, it still the same.. :s
but thanx anyway
regards

Have you try Hard Reset ?
Hi,
My first post here and try to help !
Do you know how to hard reset your Artemis ? it has works for me one time with the same problem...
But you have to save ALL your data first and reinstall everything after...
(you will find in the forum if you don't know how to hard reset)
Good luck !

i don it a couple of times, with no sucess. :S
I tried to flash a new rom throught the SD Card, but with no sucess to..
i download several ones, and keep to tell that its a invalid certificate, and tried othr been from HTC, tht dont do anything, pass directly to the 3 color bar menu. nothintg more hapend.. :S
If it help.. :
Rom version Touch_AF pTG - WM6.1
radio version 02.94.90
OS: 4.1.0.7
IPL:3.13.0001
SPL.3.13.0000
Cheers

Wrong SPL I think...
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...

Castorlama said:
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...
Click to expand...
Click to collapse
Hi,
but theres my problem.. i dont have a working A.S. connection between the phone ad the pc. :s
most probably is the rom that don't communicate with the computer, because it charge, so the usb is ok. :s
ill try through Blue ttooth to syncro the Uspl, and then try to change the rom through sdflash.. i'll pray to God to this work..