Hello, my friends!!
I've a problem and i'm hopping you can help me resolve it!!
Today i installed in my pc the new activesync 4.5, but i0m unable to make a connection between my S200 and the pc!! It just isn't recognized by the pc and it does'n syncronize!!!
Can anybody please help me??
Thanks in adcvance!!!
Ensure your network to the phone is not firewalled. In ZoneAlarm you have to change the phone network to "Trusted" zone.
V
Install this and try RDNIS or Serial
Hello and thanks a lot for the solutions you posted, but i have another problem!!!
When i try to install this software you gave me, my ppc simply refuses it because it says tha there is no digital signature on the program!!
Can anyone help me install this software??
Is there any way to overrunn this error message??
Thank you!!
@vijjay
I even tryed to connect it with the firewall disabeled, but i still can´t connect the ppc to activesync!!
Any other ideas??
Its weird, but usually any PPC can accept that software, tried it before with my Himalaya, Wizard and now my Prophet and all i did was install it and begin to use..
However, that error message usually happens when you have an Application Unlocked device, you can try to de-cert it first...it is really weird as i know, it only does happen with Smartphones..
Hello
This may appear crazy, but it worked for me unintentionally of course. I had given up on being able to sync via Activesync and was looking for a solution to backup my contacts before hard resetting my phone.
I had a permanent 'Synchronization Error', I just tried a piece of software posted here
http://forum.xda-developers.com/viewtopic.php?t=63479
This software is designed to backup contacts, but when I ran it FIXED my 'Synchronization Error', I don't know how or why, but my phone is now working with Activesync, maybe it will fix your problem too.
It won’t do any harm to try it, as all it does is create a backup of contacts.
First of all hiya everybody. I'm new in this forum(found it via a Greek forum). I have a Qtek S200 and I'm having the following problem. I have made my device to ask for a password if its being open but unused for more than 12 hours. When I tried to enter my password it wouldn't accept it. I tried to flash the rom but again no luck because every time that I try to establish a connection between my pc and the s200 the activesync asks for the password... Does anyone has any suggestions on what can I do to fix it?
Thanx,
Stradale13
EDIT --> Problem solved!
HI everyone,
I have a HTC tytn with the last rom and bootloader 1.09 (I had the portuguese rom with bootloader 1.04). The problem I'm having has also in the portuguese rom .. I try to connect to a wireless connection that is wep /open with a PEAP certificate! I can successful connect, put my user and password then about 20seg my connection friezes and only a soft reset and restore the wireless connection again!!!!!!!!
I have the certificate installed, I have connection/internet in that 20seg then I don't know how just friezes up!
Can anyone help me with this problem?
Thanks all for all support
I want also to report , my friend has also a HTC tytn with the portuguese rom.. same problem!!!!!
Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel
Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.
Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
I have been using PCAnywhere for months with no problems after many soft resets.
mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....
I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install
htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!
This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums
Hi
I have acquired HTC HD mini recently. I upgraded its ROM to new version 1.36.720.X. But still I am not able to connect Windows Marketplace via my mobile. My GPRS connection is set correctly as I am able to connect Facebook and My Phone successfully. I am facing issue with Windows Live and Marketplace.
I always get error while trying to connect Market place that
"There may be a problem with the Marketservice now. Check your internet connection and try again later."
Can anybody provide me solution for this.
Registry value for HKLM\Systems\Versions\Aku is .5.3.3 (Which is due to latest OS version came with ROM) . Hence that earlier fix of changing value of Aku is not workable though I tried it.
I think that there are many unfortunates like me who have faced same problem.
Thanks in advance for help.
regards,
Pranit
me too having the same prob....am from india...
Still no reply .. No solution from anyone !!! Friends i am dying to get solution..