Hi there,
Over the last few weeks I have had a problem syncing mu phone, I am able to connect and browse and install software via my PC but it refuses to sync, it starts good by saying that it is looking for changes, then it asks me if I want to combine, overwrite and so on and then after I make my selection it simply says 'Synchronization Error' and remains connected but that is it.
I have tried upgrading and downgrading activesync and my ROM, but what ever I do I get the same result, I have tried on another computer also and still the same.
Please help me as I am going mad, it is not quite a brick, bu is not far from it if I can not get my information on to it.
Cheers
Update
After going back anf forth with versions, I managed to do one full sync ( thank God, now I have my data back at least). but now again, it is failing,WHY ? connection exists, browse and so on works, only the sync does not work.
Do you have bluetooth?
I has a similar problem, I setup a sync profile with my PC via bluetooth and synchronised it through BT. After plugging in the cable afterwards my Syncing was fine...
worth a try
syncing problems
I had the same problem but I seemed to work through it by removing the Mobile Sync 4.5 and re-installing it. It looks like it's not working, but after the install bar goes about half way, everything is on, including the calendar and the Outlook Database. Good luck!
Related
Activesync just keeps trying to connect and is never successful. I have re-installed Activesync on my pc but it didn't help. Also, my work pc doesn't connect either. Definately a problem with my 8125. All has been well for a couple months and I have added no new software before the problem started. This problem also happened about two weeks after I got the phone and the only resolution was a hard reset. What a pain reinstalling all the software and settings I have now, it's customized just the way I like it. Anyone know how to re-install Activesync on JUST the phone or have any other ideas?
Try the latest activesync 4.2 beta and disable any firewalls if possible on the pc. On the device start activesync application and go to menu\options - delete pc that you are syncing with and try again.
Deleted profiles on both pcs installed beta on one. Still no connecting. Tried clicking SYNC on phone, pauses for a second then nada. No connection.
Have you deleted profiles on the device? and disable firewalls, and if you have a network adapter enable it because latest activesync treats the connection with device as a network - there are many posts on this issue do a search and read through some - seem to be many different factors involved.
First- Thanks for the replies Mark
I removed the PC profiles from my 8125. Also reinstalled Activesync 4.2 on my work pc. Nothing. Although this time I got an error message- Cannot find the file "http://go.microsoft.com/fwlink/?linkid=65257&clcid=0x409" (or one of its components) Make sure the path and filename are correct and that all libraries are available". Like I would know what that means. Anyways, no firewall enabled. Besides, this should not be happening, all of a sudden, on 2 separate pcs. That kinda rules out a pc problem. It has to be in the phone. That, and the fact that a hard reset fixed it last time. I'm thinking something corrupted in Activesync on the phone???
And searching on this forum is useless. I type in "connecting Activesync" and every post with either word shows up. 614 in just Wizard forums alone. Is there a way to search so that ONLY posts with both words show up? That way I can modify my wording until I find something useful. Search for any terms or use query as entered is ticked. On other forums you can just use quotation marks but not this one. It makes searching very difficult. ROB
Oh, and yes my network adapters are still enabled as always.
Yes best to search with the word AND cuts out all the other stuff i.e. activesync AND connection would do it. Yep sounds like it may be the device.
found couple of posts that seem to be relevant
http://forum.xda-developers.com/viewtopic.php?t=41955
http://forum.xda-developers.com/viewtopic.php?t=44182
http://forum.xda-developers.com/viewtopic.php?t=49161
http://forum.xda-developers.com/viewtopic.php?t=44574
Happy reading, the last post is about connecting activesync via bluetooth so maybe thats an option.
Thanks Mark. I think I may try the bluetooth connection when I get home tonight. Or I may just throw in the towel and do a hard reset. that worked last time. Plus, I can install the latest ROM upgrade. Shame theres no way to uninstall and reinstall Activesync on the phone. Seems that should do the trick (maybe). Just tried my friends 8125 on my work pc- syncs just fine. So much for all the pc fixes everyone seems to be trying.
I had the same problem with AS refusing to connect via usb or BT.
In the end i went & purchased (although the demo version would have done) Sprite backup. installed on the PC. Browsed to the install dir to find the cab file. copied to my wizard (wifi, or sd card reader etc).
Insatlled & backed up to SD card
Hard reset
restore
stop here if you're happy, if not
AS to sync calender & contacts to pc
hard reset
update ROM
AS contacts, cal, docs etc back to wizard
install SW & settings
BACKUP
Yep. Had to hard reset. All is working again. Crappy Activesync. What's up with this P.O.S. ? Trying to setup bluetooth now and the pc finds the phone but AS won't connect. The phone finds the pc (HomeCenter) but it shows no services available. I'm assuming that there should be some listed (maybe Activesync?) Guess I'll have to do some searching for bluetooth problems with AS now. Did I mention that AS is a P.O.S??? But you all knew that already. :lol:
Dont forget to open a port in you BT settings (on the pc) and tell AS (also on the pc) to accept connections on that port.
Then your wizard should be able to see the AS service on the pc (you initiate the sync from the phone, not the pc)
I have had this problem since day one, and continue to have it despite several (more than 15) hard resets, multiple ROMs, multiple pertnerships etc. I plug in my PPC USB, and it just says "connecting" forever. Every time, after plugging in my USB, I have to shut off my PPC, and turn it back on. Then my laptop finds and connects with my PPC, and syncs all my data like it should. If I do this more than 3 times, my laptop crashes and reboots. If anyone has figured out how to fix this, let me know.
I keep getting this error on when I try to sync my device - it syncs the local data, but not the data to the server. The server sync is still working through direct push though, just not when I'm connected via usb. Thing is, this error has been on and off since I first set up my device, although this time it has stayed and not gone away. I'm using AS 4.1. I tried upgrading to 4.2, and that worked well for a few days, but then it stopped syncing all together. So I downgraded back to 4.1, set up a new sync profile in AS, and still the problem is there. On my device it says:
Cannot connect with current connection settings. To change your connection settings, tap Settings.
On my computer it says: The server could not be reached. This may be caused by temporary network conditions. Support Code: 85002003.
This has happened on and off since my ppc had nothing on it. Still though, the last few programs I installed are: One Note Mobile, SuDoKuWizard, Ilium NewsBreak, Spb Weather, Resco today Plugin.
Anyone have any idea what's going on or how to fix it?
I have the same problem, just started failing on Exchange sync.
It seems like the the Wizard is trying to connect via GPRS to sync mail even though it is docked, so this fails. The rest of the sync seems to work.
I have not found a fix yet, except the obvious hard reset. :roll:
I am now also getting an error when I try to run the MMS configuration on the Wizard, it is complaining that MEETING.EXE is missing, dunno why, this also happens when I select meeting from the menu.
I have been connecting and syncing device w/out any issue until today that it begins to connect and suddely it gives me an error" Synchronization cannot be completed successfully. Reconnect device and try again" then it reverts back to "guess" instead of my device name. This is really frustrating because I cannot do anything, not even download new software. I recently downloaded WM 6 softouch 4.0.0.0.0.6 but it has been working fine until today.
Update: This is really weird. I was able to download a new radio rom eventhough I got this error, but I cannot do anything else through activesync such as contacts, notes, etc.
I was able to get it to work by deleting and re-installing activesync 4.5. So far it is syncing ok. Anybody had a similar issues and how were they able to resolve other than hard-reset or reinstalling activesync.
I am having a problem syncing with activesync, and i must think the problem is due to a drop i had the other day. It made the miniUSB port...smaller seemingly, although the cable still fits in (be it very snugly now). i can still charge it in the wall, and it shows "connected" on activesync when plugged into the pc and the amber light comes on every time. However activesync quickly gives me a message that "synchronization cannot be completed successfully, please remove device and try again or open the troubleshooter"
I'm not sure if i should just start to look for a different way to back up files via PIM or others and move on without activesync ...flash using microSD from now on? consider replacing the port (not even sure how much effort that is, or if it's possible yet)
Or is there anything simple i can try that i haven't done yet? TIA
EDIT: I Have tried unistalling and reinstalling Activesync and even dl'd latest version of AS again
How about deleting the sync partnership with ActiveSync, reestablishing the partnership and then seeing if you are able to sync?
have you tried syncing via bluetooth, then at least you would know its the usb port that is the problem, you say the connection is tight when you insert the cable, are you sure that nothing else is lodged in there when you dropped it?
well, it doesn't look like there's anything in there from what i can tell...the metal actually looks bent or mangled just a bit. Unfortunately my lappy does not have BT, so i can't try that. good thought though
Well if i was you i would invest in a bluetooth dongle for your laptop ,that way you should still be able to sync, and flash via sd card. That way you will have the problem sorted to a degree. Have you tried flashing another rom via cable btw. You say it connects via active sync. I would do a backup using spb backup or something similar and reflash the device and see if that fixes the sync issue. Try a cooked rom first, if that doesnt work try an original rom.
The only reason i mention the cooked rom to flash first is that it is quicker
I've had the same problem where active sync wasn't recognizing my phone.....that is until I soft reset'd my phone while still connected to pc...usually works for me.
another solution..on phone goto:
Settings->Connections->USB-to-PC->Advanced Network Functionality
on... I turned it off. I haven't had a random disconnect, nor PC crash.
A soft reset did the trick for me.
Dillsnik said:
Or is there anything simple i can try that i haven't done yet?
Click to expand...
Click to collapse
If you have a card reader, copy this - http://toril.ru/pda/akrndisadd.exe - onto the phone and run it there. It works every time my phone decides to stop talking to the PC.
Geoff
I am having Syncing issues, last night, has been fine until now.
Did all the deleting partnerships etc but to no avail.
The phone sync's fine with my Work PC(XP) but at home(Vista) its not,
the error 0x?????107 (from memory, will update when i get home)
Exact error: 0x86000107
Hi,
I am having a strange problem with Active Sync.
When I plug in my mobile with USB and use active sync. it does not synchornise.
I have tried all the options liek chaning schedule, changing the settings and diabling advanced network functionality still I am not able to make the diamond synchronise.
Finally, I download the active sync. 4.5 even then my problem remains the same.
It always shows the message "connected" and fails to synchronise.
thanks for any help..
connecting to activesync, buy no able to sync
Hello to everyone.
I have the same problem with my new Diamond. It have synced in the passed, but now I get the same 1 error and code 0x00089107. Can anyone help to fix it, please. Many thanks Tori
bigsteve said:
Exact error: 0x86000107
Click to expand...
Click to collapse
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.
Doing both things in post #6 worked for my TyTN. This trouble started only after I plugged my phone into a Vista laptop to use it as a modem. Gotta love Vista.... (smile)
Thank you for the help, and thank goodness for this forum!
cristiano67 said:
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.
Click to expand...
Click to collapse
I have Vista Home Premium....
try pluggin your mobile directly into a usb port on the back of your pc and not through a hub
mine did this now it works 100% of the time
bigsteve said:
cristiano67 said:
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.
Click to expand...
Click to collapse
I have Vista Home Premium....
Click to expand...
Click to collapse
I have Vista Ultimate 64 and I usually resolve this just in the way I posted in this thread http://forum.xda-developers.com/showpost.php?p=2827500&postcount=7
Best Regards
Hi All,
failry new memeber when it comes to posting but have been using you guys as an essential source of bugfixing, problem solving and general HTC MDA advice since my TYTN.
I have spent sometime searching but not been able to find anyone with an issue similar to mine.
So heres the thing, recently exchanged my TYTN for a TouchHD and overall extremely impressed with both the handset and dev work done on here already.
I am running Dutty's 1.7 rom coupled with Radio ROM 1.09.25.35 all has been working and syncing wonderfully, however today when i try to sync up to my laptop to upgrade the radio to 1.10.25.25 i cannot get the darn thing to connect to activesync at all.
I am running XP SP3 and activesync 4.5 (again successfully until today)
I am using a non HTC USB lead which i know is generally a no no, however i sync'd up my kaiser with this lead for over a year and have been successfuly syncing my HD until today. I have tried an alterante USB lead just in case, again one with which i had no issue on the Kaiser.
I have tried to sync with the firewall on and off, also with my AntiVirus on and off
I have tried disabling Start_settings_USB-PC "enable faster data sync" to no avail.
I have tried the cusomary uninstall and reinstall of a fresh MS downloaded Activesync again no joy.
When I connect my HD to the pc and select connection type "Disk Drive" it recognises it instantly and allows me to browse the microSD card
When i connect with connection type "ActiveSync" it opens activesync, and displays connecting for smoe time and then decides it can't connect and offers me a diagnostic scan.
I have run the scan and saved the log file for information.
so basically the laptop can see my HD, activesync recognises a device has been connected via USB but refuses to finalise the connection. Oh obviously i have tried the "connect all using the connection" setting in activesyn on the HD as well. Figure the more i can tell you about what i have and havent done now the more time it saves you guys.
Its almost as if a process or service has been stopped or deleted on the device but i am buggered if i can figure if or what that maybe.
Any help appreciated guys. Obviosuly i will as a matter of course re-attempt all the above with the official HTC USB cable when i get home, but honestly dont see this being the issue considering the history of effectiveness of these cables.
I look forward to a flurry of interesting responses for me to try. Big thanks to all those who have made my WM PDA experience spot on to date.
Dboy
Update as promised.
Have got home and tried to connect using the HTC cable but still no joy.....
What could possible have gone wrong ?
No one any ideas ??
Hello,
I got a very similar issue, after some investigation I found out that it was my calendar causing this strange connection behavior.
Please do the following test,
1. delete your phone in active sync
2. reconnect your phone with the PC using the USB cable
3. When it asks for the synchronizing options (by default contacts, calendar,E-mail, favorites & M office one Note are ticked), REMOVE the tick of the calendar.
4. After finishing the setup wizard the synchronizing process will run as expected
So in my case I'm having trouble with the calendar, why ? I don't know but maybe someone else might have an explanation.
Good Luck
I encountered similar problems with ActiveSync previously but it was solved not via a soft/hard reset of my HD, but after I reboot my PC. Hope this can help you.
Note: I rarely shutdown or restart my laptop. I simply leave it to hibernate.
Reset HD Touch to get syn again.
One day could sync next day could not.
In the end did soft reset of phone all OK now.
Think the problem is I took a photo and it took ages to save it?
Thinking of put small hole in case so I can do a soft reset without the pain of unclipping cover. Any thoughts.