Related
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?
bamse said:
albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?
Click to expand...
Click to collapse
Hi,
Seems like you are another of the many victims who got problems
after trying to upgrading new ROM & Raidio stack. Hope you still
got that warrant and get it replaced with a new one. Otherwise
you might have to try what some crazy guys do here trying to fix
it by doing all sort of bootloader etc.. Hope those who are trying
to get the upgrade ROM and Radio stack be very careful and make
sure your device are from the same supplier or distributor where
you got the new upgrade. Otherwise it will be screwed. Dont learn
your lesson the hard way.
same problem here.
i've got the O2 NL XDA
downloaded the 3.15 and radio updates from O2 NL website
installed updates as per instructions
1st update went without a hitch
2nd update totally screwed my xda.
now it takes a long time to start up, and when it does it just displays a white screen with a blue taskbar.
tried the bootloader way of flashing the rom, but still no luck
luckily I can send it back in to O2 to have it fixed.
I may try to do it by backup up another XDA, and reflashing mine.
Same prob with me..
I've got exactly the same problem. I downloaded the Rom update 3.15 and the new radio update. First I installed teh Rom update and after a hard reset I "installed" the radio update.
While updating the XDA hang and I waited for about ten minutes to see if the XDA was really hanging. I gave the XDA a hard reset but then the XDA didn't work anymore (white screen and blue bar on top).
I can still access the bootloader. I installed a Rom from a XDA which still works. Still no difference. When I tried to write the Radio rom to a sd-card I got that message that I have to connect one or another RS cable.
The XDA still doesn't work anymore. I have contacted O2 but they told me that they couldn't help me because they can't find my IMEI number in their system. I contacted the company where we ordered all the XDA's but I still don't have an answer.
Thank you O2 for being so nice with not helping me out with my one week old XDA without any scratch. I hope my XDA could be replaced as soon as possible since the XDA will not sold anymore when O2 changes to Telfort !
If you can make the ROM update work, you should be able to install the corresponding radio as well.
Try this:
1. Make sure you have the latest version of ActiveSync (=3.6)
2. Make sure the battery is fully loaded.
3. Extract the ROM update and Radio update to different folders.
3. Connect the cradle to AC-adapter and computer.
4. Put the device in the cradle and make sure it connects to ActiveSync.
5. Run the ROM installation application. Should take 5-6 minutes.
6. Run the radio installation. IMPORTANT: When you are prompted to remove power supply, pull the power plug from the cradle. If you do not disconnect power, the update will fail. I think this update took a little more time than the ROM update, and the device may seem "dead" for a while.
Good luck!
Hy Guys.
Are there any news about the problem flashing the XDA?
Tried last night to update my XDA to the last Qtek-Versions (ROM 3.16.52.....)
ROM Update works fine, but after the RSU Update the phone didn't work any more.
Have the same white screen with the blue taskbar and the little keyboardicaon down the right side.
Entering Bootloader mode there comes the Error Message "GSM Error"
Nice screen is the qtek "Booting Screen".
It shows
G <empty>
R <empty>
3.16.52
Hope there are any other hints to resolv this problem.
Have anyone got some experiences with sending it back to O2 with an "unoffical" Softwareversion?
Or is there any posibility to change the ROM Version to an old (original) O2-RomVErsion?
Thanks for any help....
Regards
Stefan
Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Regards,
Riccardo
Riccardo said:
Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Click to expand...
Click to collapse
SD-Card Writer just orderd
But I don´t know if it will work. Since the Bootloader says GSM Error, I think there will be no other posibility to restore it.
Let´s wait for some days, hope and we will see.....
Stefan
I was updating my MDA to WM6 when my computer froze in the middle of updating, so i unhooked the MDA and resset it, now its stuck on the splash screen!!!! no matter what I do! and activesync will not recogizine it also!! ive tried hard reset be all its saying issomething about a FAT partition, it can still go into bootloader mode so i know its not bricked, its a G3 model...SOmeone PLEASE help!!!!!
Nolimit1211 said:
I was updating my MDA to WM6 when my computer froze in the middle of updating, so i unhooked the MDA and resset it, now its stuck on the splash screen!!!! no matter what I do! and activesync will not recogizine it also!! ive tried hard reset be all its saying issomething about a FAT partition, it can still go into bootloader mode so i know its not bricked, its a G3 model...SOmeone PLEASE help!!!!!
Click to expand...
Click to collapse
Read the wiki for wizard, I am sure God will help u if u help urself. I think it can be restored by going into the bootloader.
NEww problem
Thanks, did some reading and solved it, but than i wanted a new rom and when i installed it I started and it stuck at splashscreen again, only now hard reset fails and now matter what original tmobile rom i flash it to its still stuck!!! Please help!
Nolimit1211 said:
Thanks, did some reading and solved it, but than i wanted a new rom and when i installed it I started and it stuck at splashscreen again, only now hard reset fails and now matter what original tmobile rom i flash it to its still stuck!!! Please help!
Click to expand...
Click to collapse
What steps have you taken, and where are you stuck at now? Can you bring it into bootloader mode? What IPL/SPL? You said its G3, is it CID unlocked?
So far i have flashed it with the original Tmobile rom and some others through the bootloader mode, but even after it says flash completed I still get stuck on the splash screen, my ip/spl are both 2.26, and it is CID locked, and at the time i dont had a mini sd card to perform an sd rom upgrade, god i wish i just stuck with my original rom, please help!
Nolimit1211 said:
So far i have flashed it with the original Tmobile rom and some others through the bootloader mode, but even after it says flash completed I still get stuck on the splash screen, my ip/spl are both 2.26, and it is CID locked, and at the time i dont had a mini sd card to perform an sd rom upgrade, god i wish i just stuck with my original rom, please help!
Click to expand...
Click to collapse
So you've flashed back the oroginal tmobile rom, is that also 2.26? I presume you are using the standard update util for the flash and it says completed? I've seen the update util do that (say 100% complete but not actually update anything) .. this behaviour is documented somewhere in this forum (took me about 8 flashes and a lot of confusion and frustration before I found the forum threads!) this only happened on a CID locked phone flashing a custom rom.. i don't think that happens with original vendor roms..
Can't say I have had the same problem. From looking at the forum, most people who get stuck like this can flash the wizard love rom and get back on. For me, I have mostly been able to get back to the original rom when needed, except when I bricked my G4 phone (before G3/G4 was well understood)...
Yes sir that is also a 2.26 and yes im using the standerd methodhat is this wiazrd love rom your talking about though? Maybe i should flash it to that instead of the original tmobile rom?
p.s if this only happens on cid locked phones, is there anyway to unlock my cid while in bootloader mode?
Nolimit1211 said:
Yes sir that is also a 2.26 and yes im using the standerd methodhat is this wiazrd love rom your talking about though? Maybe i should flash it to that instead of the original tmobile rom?
Click to expand...
Click to collapse
Like I said I had not used it myself, but there are many references to it in the forums.
When you say you are stuck, does it load the Windows splash screen or does it get stuck on the IPL/SPL screen?
It gets stuck on the IPL/SPL screen
Nolimit1211 said:
p.s if this only happens on cid locked phones, is there anyway to unlock my cid while in bootloader mode?
Click to expand...
Click to collapse
No you can't CID unlock in bootloader mode.. there are a number of threads on how to CID unlock...
Thanks for you assisting me sooo much, im going to try and flash with the love rom, do you have any other tips?
Nolimit1211 said:
Thanks for you assisting me sooo much, im going to try and flash with the love rom, do you have any other tips?
Click to expand...
Click to collapse
Only that by all accounts, you should be able to get a working phone again if you can get into bootloader mode.. unless you have hardware issues. The other item that may be of problem is the extended rom which can get corrupted.
Sorry I couldn't be of more help. Good luck.
Can anyone else please help, youll be a god to me if you can help me get my MDA up and running again!!!!
hello, i have read and read all the wiki's, but ive not been able to fix my phone.
i use a cingular 8525 (herm100) phone, and cannot install any rom on the phone. I have two versions of the At&t ROM with radio's and tried them both, but they all stop at 11-12 %.
i have tried usind the sd-card method, and it does not pass the "GSM - " portion.
i guess the radio is not working or is corrupt or something..
my phone is now in bootloader and just says
HERM100
IPL-1.04
HERM100
SPL-2.03
please any help will be appreciated. thank you!!!!
wow.. can anyone even say "sorry"
geez.. 35 views, and not even one reply, or consolation message, or anything??
I would update your copy of Windows Mobile Device Center first (especially if you're using Vista). Flash SPL and the radio, then flash any rom to see what happens. I mean really at this point, it's already a brick... try some crazy stuff, you can't hurt it anymore than it already is. I did the same thing to mine a couple of months ago, and after trying these things, I got it working again without a problem.
update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...
ultramag69 said:
update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...
Click to expand...
Click to collapse
Just to make sure I understand, the unlocker you linked is to SIM and CID unlock, correct ?? And then on top of that - you should update to HardSpl also ??
I have an 8525 on its way that I will be looking to upgrade - just want to make sure I am understanding correctly.
roomtek*8525 said:
geez.. 35 views, and not even one reply, or consolation message, or anything??
Click to expand...
Click to collapse
sorry for the late reply
i have been dealing with this for 3 days and finally managed to run official AT&T rom for 4 days wout hard reset.
there is a method dumping an official himalaya rom to hermes. az pof explained in one of his posts all commands except radio commands are different in himalaya so it is safe to use dumping method.
it basically deletes everything in radio rom so you can install official rom.
PS: at first install official rom stucked %12 i said damn but in second try %15 third try success
i am at work now i dont have the link of method but try googling or searching my posts (not too much )
i hope it solves your problem
bartan
thanks guys, i've tried some things
i have tried using Hard SPL v.7 it does not work.
i have tried using official cingular roms too. stops at 11% no success.
i have tried upgraing radio only, stops a 0% and restarts the device.
i have also used mtty, with some text inputs, no success
i have even tried selling the brick on e-bay .... as you can guess no success.!
bill_in_mtl, sorry bout lateness of my reply ( net problems), yes you do unlock sim and cid. Sim unlock means you can use ANY simcard from any carrier and Cid unlock means you can flash ANY hermes rom (both official or cooked). It needs to be unlocked first as the spl is downgraded to 1.40 (I think) and you should REALLY be running with 2.10 olipro (hard SPL ver 7). I wouldnt bother upgrading to Hard SPL ver 9 a this is essentially only ver 7 with some neat features for developers but it does throw up an error message when you finish flashing a rom(no problems t just feels like it).
Hard SPL WON'T stop you from bricking your phone BUT it will make it easier to recover.
roomtek*8525, sorry to hear that but have you tried flashing with a cooked rom? This unfortunately wont fix the phone part but you will have a working PDA...If you've tried MTTY with info 8 and task 2a commands then thats the best to hope for, Sorry bout that..
hi to all...
i have a trinity in my hands that i had to change lcd...
after i change lcd i tested and seems to be working well..
but it wasn't... the first problem i saw that was when i turn on,it freezes at menu after about 1minute...
after some searches, i've flashed with olipro 1.20 (till here is fine), and then upgrade radio..no luck, because when i tried to do that, it won't pass from 0% at any time and any version of radio
after that i tried to upgrade the rom;but one note,every time i made the 3 color "trick", the olipro 1.20 disappear and i have to flash it again (i don't know if it is normal or not).
finaly, when i try to flash the rom, it freezes at 13%, in all times i tried
i don't know what to do more, if anyone have any ideia, i'll apreciate a lot some help..
many thanks in advance for the patience...
best regards
Have you SIM/CID unlocked it?
no,but if i install olipro, does it needed to unlock to flash the phone?
regards
i tried now to unlock...
but it seems that in both unlock methods,the phone should turn on wich is not the case
Try entering bootloader mode and flashing back an original rom, depending on your device. When successful, your device will boot normally and then you will be able to SIM/CID unlock it and follow the guides from here
http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
thank you for your reply...
one of the problems is that i don't know wich was the original rom...
now i'm trying the many roms i can..
is there any method to know what was the original rom?
regards
Isn't it branded? O2, Vodaphone, HTC?
Check the shipped roms http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
yes,is an htc...
one of the roms i tried, i could flash to the end (one of cooked one wma 6.1).
but the problem remains, when reaches the wma logo, it freezes
any sugestion?
regards
Try an official HTC rom
http://rapidshare.com/files/2296300...1_1_.23.405.2_103_6275_1.38.00.11_108_GPS.exe
thanks for the rom, but is the second one that freezes at 13% when installing
any more ideas?
regards
The only other thing I can think of, is that you have a bad SPL. Try the splxploit, see if something comes out. After the SPLXPLOIT, flash again Olipro's 1.20 and if everything goes well, try flashing a 6.1 rom.
http://forum.xda-developers.com/showthread.php?t=308691
i did that already :/
my thought is that the problem is in the flash memory..
i'll try to give hot air in the flash to see if solve the problem because i think is not software problem..
thanks for the help of you
That's what we are here for, isn't it? To help each other. It's a shame it didn't work. Hope you get it sorted.
hey guys.. i need some help
i installed an app an asked me to restart the device.. i did
and now it's stuck on the splash screen
IPL 2.27
SPL 2.27
GSM 02.44.11
OS 2.27.1.1
and the orange brand wallpaper
what can i do? i tried to reset it and format it
but an error shows up
"Press Send to restore factory default,
Other keys to quit"
ok.. send it is
"Format FAT Partition
Format failed"
i can enter RGB bootloader (cam button+power), but i don't know what i can do??
ps: i just got it from a friend, i don't think my phone is cid-unlocked..
and i'm stuck at the splash screen and nothing to do
please help me.. tell me what can i do
Ouch.
Sounds like the built-in flash memory is bad. I'm not sure what you can do about that, short of replacing it.
No offense Reverend, but where did you hear that? Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
ashasaur said:
Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
Click to expand...
Click to collapse
something from a pocket freeware site.. "XDA-Team_Manilla2D.CAB"
it's a touchflo 2d app for today screen.. after installing it, the sistem wouldn't boot up anymore. so i tried to format, soft reset, to restore the system..
the formatting started and then gave an error and shut down immediately. i didn't even catch a glimps of that error 'cause it restarted.. and then the problem. it won't go past the operator splash screen
tried to reformat.. would't start.. format failure
..simply wow.. don't get me wrong , but i didn't knew there was a bootloader screen until this happened.. i dug up about this problem on the forum, but i can't solve it.. i don't know that much about flashing.. isn't the wizard supposed to be cid-unlocked to be able to flash it with a new rom?
or there's a rom that doesn't require the pda to be unlocked?.. cause' i think mine isn't. and, since i can't get it to boot up the os, i can't cid-unlock it after the tutorials i've found here..
and i don't want to bury it, yet
Oh you poor sole...that program that you tried to flash is notorious...I did the very same thing to mine just the other day. It doesnt work with the Wizard yet for some reason.
Now, onto your problem, yes-I think that your Wizard IS INDEED CID locked, and if that is the case, search for the Wizard LOVE ROM and flash it. It can be flashed with a CID unlocked device. Head into your bootloader mode, then start up the RUU flashing program on your PC that is included with the ROM. After it flashes, you can use the Wizard Service Tool, which is also availible via searching to CID and SIM unlock your device, and then you can put any ROM that you like onto it. I hope that helps somewhat!
If you can get it into bootloader mode, you can recover. If the phone is not unlocked, you will have to load the original service ROM for that phone.
You MIGHT get lucky by just flashing the IPL/SPL back though, now that I think about it...look at the "How to Remove HardSPL" thread for the most popular IPL/SPL sets. If this works, you won't have to put all of your custom settings and programs back on.
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status,than downgrade to IPL/SPL 1.xx to CID unlock the phone,how to CID unlock the phone, read and follow this guide carefully :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
zabardast_1 said:
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status
Click to expand...
Click to collapse
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
If it is truth....
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
If you have said the truth... you've got a G3 device cause your ipl spl are 2.27.
So try to install this original ROM... is for Tmobile WWE so try it.... http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
Or search on tutorials tu unlock and upgrade the wizard Love ok?
Good luck men...
And please please please read and ask before do anything, BTW now the only you can do is to runn this ROMs cause you cant get your original carriers ROM.
If this dont works... please read the thread from upgrading forum in this wizard subforum that said something like Stuck on splash screen solution DYI or something the tuttorial DEV is called Drug_store.
zabardast_1 said:
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
Click to expand...
Click to collapse
Good catch. Sorry about that!
Myrddin Wyllt said:
Good catch. Sorry about that!
Click to expand...
Click to collapse
Nah! buddy,you are doing fine,its just we sometime overlook the post,it happens to all of us,so no harm done !
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
zabardast_1 said:
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
Click to expand...
Click to collapse
10x a lot.. i hope it won't die on me..
LE:
i tried the O2 rom [12.18.3.103] u gave me. it doesn't start flashing.. 0% and then
quoting:ERROR "This NBF file cannot be used for your PDA phone. Please get newer NBF file."
ps: The orange one on the xda ftp server doesn't work .. it's archived and parts are missing..
Hmmm,ok,lets try this out,download 'Button's Rom 1.05' from the link posted below and check if this works out.
Otherwise,you'll have to look for official Stock Rom (Romanian),which was running on the phone before.
http://wiki.xda-developers.com/index...0for newbies
i'll try this one.. for now.. ps:your link is broken?
i just have another question.. i have a friend with the same wizard as mine, i mean in the same carrier.. is it possible cu get his rom? to dump it on SD card.. or something?
so that i may flash that rom?
LE:
i found another thing on a DIY
If you got IPL/SPL 1.xx go to G3.3. If you got 2.xx go to G3.4
G3.3 Download button rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.4 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
Click to expand...
Click to collapse
should i try the wizard_love rom?
ok,download Button's Rom 1.05 from here:-
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
also try this one :-
xda_miniS_LaunchRom
http://rapidshare.com/files/43423464/Xda_MiniS_LaunchROM_v154102.exe
and yes! you can also try Wizard_Love _Rom.
Now,its possible to back up the rom from your friend's phone,but it also have to be CID unlocked first and your device shud also be CID unlocked to flash it from the sdcard (MTTY) method.
pfff (
i've updated the rom with the Wizard_Love_2.26.10.2_WWE_Novii_CF2 and now i have a blue sci-fi splash screen with "AKU 2.3" in the top-right corner..
IPL 2.27
SPL 2.27
GSM 02.25.11
OS 2.26.10.2
same ****
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
hmmmm,try a Hard Reset,hope it works or try other roms I have posted above.
Do you have any sdcard inserted in the phone right now,take it out before flashing any rom.
koolariz said:
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
Click to expand...
Click to collapse
dude.. that's what i've been trying hard reseting it.. and i get the same error each time i try it "Format Failed"
no sd inserted.. i took it out a while ago.. cause i read on the forum to flash without it.
i begining to get desperate over here
i'll try other roms..
what else can i do than hope this works
Also take out if any sdcard or mini sd is inserted in the phone before flashing,it also causes this Format Failed problem.