hello,
i have a problem with my xda neo:
holdung hardware buttons doesn't work anymore.
for example the volume keys: some days ago i could hold down the button on the side and the volume gets reduced until the phone is silent. or in menus or contacs i could hold down the cursor button and the selection was going down. now it goes down only one entry and doesn't scroll down anymore. may i have disabled it? i have sktools but i did not find the setting for it.
does someone know, what i have to do?
ps: i don't want to hardreset
edit: ok, looking around in tools and registry didn't help. but the built in settings dialog was the solution. sometimes the easiest way is the solution
heh lol, good you fixed it
With a complete lack of knowledge how to fix it I was already ready to give you advice to make a backup of your phone, do a hard-reset and check if the button was at least still working. Then you could have put the backup back again and you are up and running. Which would at least have ruled out hardware problems
Anyone else get these syptoms?:
the volume control on the side, when I press the up or down once, it goes to the volume slider screen. One would expect that pressing the volume up, to move it up and then down, to move the volume down right?
Well on mine; if you press the volume button once, it goes to the volume screen ok, but if you press it again, it takes you back to the previous screen without altering the volume. The same happens for both up and down buttons.
frustin said:
Anyone else get these syptoms?:
the volume control on the side, when I press the up or down once, it goes to the volume slider screen. One would expect that pressing the volume up, to move it up and then down, to move the volume down right?
Well on mine; if you press the volume button once, it goes to the volume screen ok, but if you press it again, it takes you back to the previous screen without altering the volume. The same happens for both up and down buttons.
Click to expand...
Click to collapse
As of today I have the exact same issue ! I installed sdkcerts.cab and FInixNOverBatteryIconsOnly.cab but uninstalled and the issue is still there
have you had any luck in finding out what's causing it, not overly enthusiatic about doing a hard reset which will probably be mentioned ?
I have the same issue, after installing some apps on my new Blackstone the Volume-settings feature was gone...
Any Ideas?
regards+thx
ps: please don't tell me to hard reset ;-)
I also have sdkcerts.cab and FInixNOverBatteryIconsOnly.cab installed (and many other applications), but my volume buttons work as expected. Maybe it has something to do with device lock?
Regards!
MHoefler said:
Maybe it has something to do with device lock?
Click to expand...
Click to collapse
MHoefler, thank you, nice hint!
After uninstalling S2U2 the volume buttons are working!
I am using S2U2 1.35, will looking for a new build...
regards
s2u2
i had the same issue with s2u2. after enabling the volume button within the s2u2 settings it works fine again.
needacloud said:
i had the same issue with s2u2. after enabling the volume button within the s2u2 settings it works fine again.
Click to expand...
Click to collapse
yes, just re-installed it.. same issue.. and then with setting "Volume Control = ON" it is working.
thank you
well spotted MHoefler !! all sorted now after enabling the volume in S2U, happy again
Yes, work with volume control "on" setting but, the volume control at call is locked!!
Any solution for up or down the volume at calls (with S2U2 installed)?
Regards.
You may try a hard reset.
Black Antitoon said:
You may try a hard reset.
Click to expand...
Click to collapse
Yes Black, I know that hardreset works but I wanna use S2U2.
It is clearly a bug in s2u2 and until it gets fixed there is not satisfactory solution unfortunately.
That seems. Just wait for new release.
sgbmad said:
Any solution for up or down the volume at calls (with S2U2 installed)?
Click to expand...
Click to collapse
I found the solution at the diamond-forum. You have to set "Don´t use the keyboard hook" at the S2U2-Settings to "ON" and the S2U2-Volume-Control to "OFF" -then all works perfect!!!
Thanks nick007, I'll try it.
EDIT: Yes, it works! And the hardware buttons does not pick up/ignore the calls.
thank you, but for me that doesn't work correctly: With these settings i can control the system and ring volume during a call properly, but i can't change the actual 'in-call-volume' (which means the volume how loud i can hear the other party talk)... can anyone check this?
regards jan
Yes hausen, I can change "in-call-volume".
Before you uninstall S2U2...
I had this issue as well, and suspected it had something to do with having the volume buttons captured in Mortplayer and Coreplayer. Glad to see they weren't the issue so i can keep controlling them the way i like
But be careful when getting rid of S2U2!
I had S2U2 installed as well and uninstalled it without setting the volume control, and the volume buttons remained broken! I had to install S2U2 again, activate its volume control and THEN uninstall it to get volume control back! So if you want to uninstall, be sure to fix the volume controls beforehand.
Well, it seems like i really messed it up.... My volume buttons are still broken
I get the same symptoms as described earlier (volume buttons call up the volume screen, pressing a second time does not change volume but closes the volume screen instead), but in addition i noticed pressing the volume buttons while on the volume screen actually generates up arrow/down arrow keys! You can see this on many of the manilla screens where suddenly items become selected, but in other programs as well. The volume key press that calls up the volume screen doesn't seem to generate an arrow key, or it doesn't get sent to the current program.
So a couple of things i did that could have broken it:
I remapped the volume keys in Mortplayer.
I remapped the volume keys in Coreplayer.
I had S2U2 installed.
I tried to "fix" things with AEBplus.
The symptoms are always there, even after a soft reset without having run either Mortplayer or Coreplayer. I think the system's response to the volume key has changed, and the volume keys still send volume commands because explicitly remapping the keys to volume keys with AEBplus doesn't change anything. I even tried remapping another key to generate volume commands, but that just seems to keep calling up the volume screen, even if it's already active!
So i'll be struggling with this for a while it seems.... but if anyone has any suggestions or insights.....?
I have the same problem ... DOWN volume key is not working.
The annoying thing is that if I try to soft-reset the device it works but I get into bootloader. I have to press the UP volume key and keep it pressed until HTC logo appears, or else I still get into bootloader. So, I don't know what to say, but for me at leat, it might be a hardware problem.
Another thing is that when I go to hard-reset screen, none of the buttons work. I mean is I try to press volume UP or DOWN, nothing happens. Today I succeded in hard-reseting the device but the problem still persists.
I hate this thing and I hope that somehow this problem can be solved. Good luck to everyone.
PS: I will try to get official rom, radio, and SPL on my diamond, and maybe that will clear the problem because it is annoying at least.
Hope you guys have better luck then me.
I have got T-mobile wing for few weeks and now the volume feature keeps turning down on me and that little volume window pops up. It interferes with my call and will not let me text because of it. HELP PLEASE!!!!
Even I had done Hard Reset more than once but it comes back again and again after a day or two.
Can anybody suggest any solution other than just hard reset? As i have done hard reset various times....
have you flashed a custom rom if so try reflashing it that miht do the trick, if your using the rom that came with the phone it might be a issue with your phone might have to return it and get a new one
I am using the standard rom that came with my phone, no custom roms.
Your volume button is probably slightly stuck.
But I can use the volume button to try to turn up the volume .. sometime I win and sometimes that malicious thing wins turning down the volume..
Somebody knows about how to disable that little volume popup or HOW TO DEACTIVATE THE VOLUME SLIDER in T-Mobile wing?
rehan81 said:
But I can use the volume button to try to turn up the volume .. sometime I win and sometimes that malicious thing wins turning down the volume..
Somebody knows about how to disable that little volume popup or HOW TO DEACTIVATE THE VOLUME SLIDER in T-Mobile wing?
Click to expand...
Click to collapse
No easy way I can think of other than butchering the volume control altogether (by killing the dll's responsible.)
Hi Guys,
this issue has been driving me slightly mad, tried searching with no luck, hopefully someone can help.
basically when i get an incoming call a) the flip phone over does not mute call, b) pressing the mute button on the incoming call screen does not work.
Now this used to work, and i have no idea what changed to cause it to stop.
i have checked the following :
regsitry - FaceDownMuteRing set to 1
HD Tweak tool - mute call is enabled
S2u2 - i have all phone settings off (callerID section set to off)
Now i do have AEbuttons installed which is probably the last thing i installed, on this i have mapped several buttons to the volume keys. Cant see this been an issue though.
Also, another issue which has developed is my backlight settings keep reverting back to timeout after 10 seconds everytime i reboot the device, could this be related.
any help will be much appriciated,
thanks
tas
taz2007 said:
Hi Guys,
this issue has been driving me slightly mad, tried searching with no luck, hopefully someone can help.
basically when i get an incoming call a) the flip phone over does not mute call, b) pressing the mute button on the incoming call screen does not work.
Now this used to work, and i have no idea what changed to cause it to stop.
i have checked the following :
regsitry - FaceDownMuteRing set to 1
HD Tweak tool - mute call is enabled
S2u2 - i have all phone settings off (callerID section set to off)
Now i do have AEbuttons installed which is probably the last thing i installed, on this i have mapped several buttons to the volume keys. Cant see this been an issue though.
Also, another issue which has developed is my backlight settings keep reverting back to timeout after 10 seconds everytime i reboot the device, could this be related.
any help will be much appriciated,
thanks
tas
Click to expand...
Click to collapse
Had the same problem. And exactly the same possible culprit. Thus, I decided to try restoring the volume keys to their default mappings in AEB, and alas, now the muting works when I press the mute button or face the phone down.
On the other hand, if you really need to map the volume buttons, I also discovered that while the mute button or facing the phone down would not mute the phone while it is ringing, pressing the volume down button will (assuming that it is not mapped in AEB).
Hope that helped!
vince_b said:
Had the same problem. And exactly the same possible culprit. Thus, I decided to try restoring the volume keys to their default mappings in AEB, and alas, now the muting works when I press the mute button or face the phone down.
On the other hand, if you really need to map the volume buttons, I also discovered that while the mute button or facing the phone down would not mute the phone while it is ringing, pressing the volume down button will (assuming that it is not mapped in AEB).
Hope that helped!
Click to expand...
Click to collapse
Hi Vince, nice one that was exactly the issue. Unmapped the buttons in AEB and it now all works..who would have thought. Now i have to decide what want the mute option or the mapped buttons
thanks
tas
Hi,
I've just installed the ROM Upgrade for HTC HD2 (T-Mobile) 1.72.110.4 on my HD2 and lost the volume control on the LHS button, has anyone else run into this issue?
Cheers
Hi,
I am having the same problem, after updating to that ROM my volume keys now act like up/down arrow keys. I can see this might have it's uses, but I would prefer it if they was to change the volume...
Does anyone have any ideas on how to fix this? I was thinking to use a button mapper, but I would prefer it to 'natively' work as it should.
Thanks in advance!
I found a solution, i uninstalled audio route (which is to send audio to the earpiece from Skype etc.), did a soft reset and my volume keys work as normal now.
It might be a coincidence, but worth a look if you are having this problem.
I Managed to get the volume working by chance. I used the Radio and adjusted the Volume with the LHS button, ever since it's been OK. Bit buggy me thinks.