Whenever i connect my Imate Jasjam to the USB port on my notebook my wifi internet connection drops out. Is this normal? Can it be fixed?
Mmh, I had that with my previous PC and Wizard. I formatted the PC and reinstalled it from scratch, with the latest WLAN card driver too. That finally worked...
Related
I have a problem with ActiveSync (or with my Qtek 9000, who knows): when I connect the PDA to the PC through USB, the PC detects the PDA, ActiveSync goes into "Connecting" mode, and then.. nothing. It says that it can not connect.
I followed several troubleshooters on the Internet, but the symptoms still remain.
Perhaps it's a software problem on the PDA. I'd love to perform a hard reset, but I must synchronize first (it's been 2 months since I can't synchronize, and I have done quite a bit of appointment and document entry on the PDA).
So.. what should I do?
I can connect the PDA to the Internet through WiFi and GSM 3G. Should I run a backup program, transfer everything to a FTP site, and then hard reset?
If so, which backup program should I use?
Is there anything I can fix on my PC to make it connect to the PDA?
What is your advice?
THANK YOU!
I have exactly the same problem when connecting via a USB cable to my home PC. Connecting to my home pc via bluetooth works fine and connecting to my work pc with a cradle works fine.
I've tried using different USB cables, different USB ports and have two Qtek 9000's with exactly the same problem on the same PC. I've tried re-installing AS 4.1 and 4.2 and both fail to sync with the cable.
Any ideas or advice would be greatly appreciated.
My Qtek 9000 used to connect and sync on this computer. In the last 2 or so months, this hasn't worked. No idea why!
Are any of you using the app "USBSwitch"??
For some reason, ActiveSync is using settings for a serial connection to connect to your PDA. USBSwitch will allow you to set the connection as RNDIS, which will allow you to connect and sync.
You can download it here -- http://forum.parallels.com/thread2743.html
I had the same problem with my Cingular 8125, and then found out that HTC included the USBSwitch app into the latest ROM upgrade. Has been working fine ever since I found it to switch over.
I had similar problems with my Qtek 9100
My problem was my firewall (Sygate personal firewall (SPF)) which did not allow me to connect via USB.
If I turned SPF of it worked.
My current firewall, NVIDIA Firewall, asked me if I wanted to allow the USB connection to my device. When allowed everything works fine.
/joel
How to get working wlan connection when connected to computer with usb data cable. I'm using activesync 4.2. Is this problem result of activesync or what?
Annoying problem..
-Matti-
I upgraded my rom with shaps's 3.54b. I can connect to internet with phone, but it is impossible with usb cable to use it as modem.
When I try to use internet sharing it disconnect active sync and try to connect to 3g network. Sometime it can connect, but the pc cannot recognized the connection working. Any other times it cannot connect at all.
Looking for in system option on my pc i saw my phone as network device (windows mobile based device) and not like usb modem. Is it normal? Reading in other forum someone suggest me to install usb modem driver... where can i download the right driver?
Thanks
try resetting your phone before you connect it. Sometimes like you it'll connect but sometimes for me my phone says check usb connection. But i reset the phone and it works fine.
I was trying to tether to my laptop today and it seems that my laptop does not see the USB connection. I set my phone to internet sharing and connection of usb and phone as modem I then press connect it goes out and connects to evdo then it says check usb cable connnection. I then plug into my usb cable. Nothing happens except my charging light comes on. I know my phone works as I just tried it out on my co-workers laptop same procedure same cable and it connects without issue. I just downloaded the wmodem.zip installed it same issue. I Also tried to connect it first before I go to internet sharing. It connects to active sync then I start the connection and active sync goes away but I get the same message on my phone "check usb cable connection".
Bluetooth?
I had the same problem with mine and the usb connection. I think it needs drivers. if you look in device manager you might see a device with out drivers. If your buddys works find out what driver it's using..
I just use bluetooth. it works great if you have it.
Figured it out. In my network connections window when my phone would connect it would appear here under LAN or high speed internet connection. but it was in a disabled state so I enabled it and works like a charm.
Thanks for everyones help!
i have an issue that has only appeared in the last couple of weeks, and is very frustrating!
whenever i connect my HD to the pc via USB, then the PC's wireless connection is lost, and it will not reconnect.
if i disable/re-enable the wireless adapter, it still cannot connect. i have to restart the pc to get the wireless back on the PC. it is very annoying, as it means everytime i want to connect my HD, i will have to restart my PC afterwards!
disconecting the HD from USB also does not allow wifi to re-connect, i always have to restart
any tips to help?
Thanks
..
ther is something wroong in your pc. thats for sure.
I don't think that you will find the answer.
the best thing you can do is by reinstalling your beautiful win XP machine