Hi Guys,
I wanna share something i found out a while ago.
I am currently holding on to a Motorola HT820 and a BlueAngel and i was kinda playing around with it wondering why i cannot answer phone calls and only can play my MP3's. Here is the solution.
Install the A2DP Profile
Soft Reset
Pair it up to your BT Stereo headset using high quality audio
now, upgrade to build 3900.
Run the restartradio.exe
run the bt upgrade cab file
run the restartradio.exe
Now, pair it up to bluetooth handsfree headset.
This works wonders. It seems to work best on WMP10. I have tried
Mortplayer but, after i answer calls, it stops playing and does not resume.
For WMP10, it resumes fine. I have only tested on BlueAngel and HT820.
I dont have the luxury to get my hands on other devices as yet.
BT upgrade files found here
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
A2DP details found
http://forum.xda-developers.com/viewtopic.php?t=25443
ENJOY !!!!
this currently works best on WMP 10
You can continue listening to music after your call ends with mortplayer,
you have to disconnect the pairing and re-pair again..
XDAII and Motorola HT820
Hey guys,
I'm contemplating buying a Motorola HT820 but I'm concerned that it might not work with my phone - I have an XDAII with WM2005 1.60A installed. anyone know anything?
Thanks and best regards...
Hi
This sounds like what I've been waiting for too.....
I have an XDA II running 2003SE will this work with this combo any ideas?
Good one... will try it later
Has anyone tried with Motorola HS 850???
Has anyone tried with Motorola HS 850???
So far, i have not tried it on XDAII... but i think it should work..
Can anyone confirm if this is possiable with an XDA II as having read through numerious threads on the subject of Bluetooth implementation with various Wicomm configurations, but cannot clearly identify that the A2DP Protocol can be successfully made to work on an XDA II.
I suspect that this can only operate on an XDA IIi or XDA IIs. My requirement is to get a set of Motorola HT820 Bluetooth Stereo Headphones to function with my XDA II via Bluetooth, I am not really worried about the Phone Headset function I would just like to hear Audio via Media Player 10.
Thanks
I have just upgraded to 1.40 ROM (iMate) with Orange EXT ROM on M2000. I have radio 1.13 and the A2DP profile loaded.
Everything was working fine with the old ROM and wmp9, but wmp10 does not respond to the pause, back and forward buttons on the ht820.
Does anyone have this working on ht820? Is there a known work around?
Motorola BT820 Audio Gateway and a player
I've followed the steps above and now have the two new profiles and have managed to pair my Motorola BT820's without any problems.
I've read that this works best with WMP10 but since I don't have this I decided to try Mortplayer.
Silly question : How do I get my XDAIIs to send the audio to the headphones ? Their is an outgoing connection between the two but the sound still comes out of the speaker on the XDAIIs.
If a phone call comes in then this is directed up to the BT820's
Help
Jason
i have done over 50 hard resets.. many tries and it seems to be an intermittend prob.
@woodrjh
In this way a HP Bluetooth Headphones and a Motorola HT820 works with my xda IIi in a2dp mode incl. the Buttons in WMP10.
1. remove the RunBT file from the Autostart dir -> softreset
2. Install the PDA2K_BroadcomCorp_BTUpdate.cab -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
3. Install the HP iPAQ Bluetooth Stereo Headphones Driver Update -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
If the error \windows\btceavif.dll in use come, rename it with Resco File Editor and try again the driver update.
4. Put the the RunBT file back to the Autostart.
cu bülo
does this method enable your bluetooth headset to receive calls?
Has anyone been able to make these headphones work with the wizard?
I have searched forums but cannot find a solution.
Hp do not have any drivers to install onto wm5 operating system.
Any help will be greatly appreciated.
you don't need drivers. Just use search to find the cab update en use them.
I've just received mine: they work perfectly!
just bought a set, Help
:?: Hello, I just bought a set of these off ebay, have t-mobile mda vario flashed with the cingular rom. I am reading your posts, but cannot figure out what you are talking about with the cab update. my device finds the hp headphones just fine, but there is no usage choices listed,how do I get these things to work? is there an install file I can download? Please help.
HasC,
I've got the Logitech one and they are the same as HP.
Power of the headphones and keep pressing the power button until the led flashes red.
Then you can connect it to the wizzard with the usual 0000 pin.
Did it with mine and it works.
Cheers,
Drifter
thanks for reply, but pairing not the problem
Hello, they paired just fine with the wizard, but how do I tell the wizard to play the audio through the headphones and not the internal speaker?
Drifter, you the man!!!
Mine is working beautifully now, your instruction to wait for red light to flash solved the problem.
Thanx
totally confused now???
Hello again, They are paired, but there is nothing listed in "Services to use from this device" List, is there some software or driver I need to install? is there some menu choice I need to select somewere. Please help.
jappetto,
I am also using the cingular ROM, all I did to make them work was to follow Drifter's example on pairing them. Once they were paired it just worked straight off any audio player that I used, eg Mort player or windows media player, WM allows me to forward tracks as well.
I really dont know why you are having trouble, try removing all bluetooth paired devices from your phone and pair the headphones first. This may help
Still confused
"cab update en" sounds like software I need to download. am I using the wrong rom?
tried deleting all and pairing headphones first.
sees them but there is no services listed to use. how do you tell media player to play through headphones? does it happen automatically when you turn yours on? or is there a button or command I am missing?
read all about the A2DP update in the Tornado forum as well as the A2DP threads here before you start to use your headsets. You will need A2DP to make these awsome HP headphones work to their fullest abilities.
Japetto,
I am using this ROM:
ftp://xda:[email protected]_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP.exe
It has A2DP settings configured already.
When you pair the headphones with this ROM installed, make sure your volume is not on silent on phone (should adjust automatically) when using headphones. If you are using WM player and cannot hear sound through headphones, press round connect button between the volume and track forward/reverse buttons ( the same one used to pair the headphones). this should establish a link with the headphones and start working.
No other software/drivers are needed to make them work.
Hope this helps.
ive got the normal tmobile uk rom...would it work??
what its the quality of sound from the headphones...when compared to the headphones given with the MDA Vario
also could someone direct me to a link where i can buy them from
Thanks
I'll Try it
thank you HasC
SBouri,
No, you need to change ROM so that it is A2DP compliant, at present t-mobile have no ROMS for this, mine was originally T-mobile ROM.
The quality of the headphones are fantastic, they are better than vario supplied ones because they are wireless and I have had the phone upstairs and was able to listen from kitchen downstairs, occasionally there was some interference, but close range, worked seamlessly for me.
HasC, fair enough mate..ermm i'd rather not upgrade my rom as i dont want to take any risks which will turn it into a brick
i am a techi but the phone doesnt give problems as other people post about..so id rather just keep the current t mobile rom
thanks for the reply though
SBouri said:
HasC, fair enough mate..ermm i'd rather not upgrade my rom as i dont want to take any risks which will turn it into a brick
i am a techi but the phone doesnt give problems as other people post about..so id rather just keep the current t mobile rom
thanks for the reply though
Click to expand...
Click to collapse
You don't ned to upgrade your rom to get your stock Tmobile MDA to work with BT stereo headsets!
Just install the A2DP hack.cab found in this thread http://forum.xda-developers.com/viewtopic.php?t=48535&highlight=a2dp and your stereo headset should show all options for Handsfree, Headset and Wireless Stereo.
I have not upgraded my rom, as I agree with SBour, I *can* do it but it's not worth it to me just yet....
I am using the stock Tmobile Rom, the A2DP hack and I-Tech Clip s35 stereo headset. The sound is lound and crystal clear.
Jaidnoire, nice one mate, will give it a go and ill order the headphones asap...i found a site through kelkoo for £48...is that cheap compared to any other sites you may know of?
Can anyone tell me what the battery life is on the Motorola HT820? As i manily want to listen to MP3s of my Vario
The HT820 manual claims 14 hours for music listening or 17 hours talk time.
I need some help here and I have tried searching but couldn't find anything relevant. I am using WM5 on a Cingular 8525.
I recently purchased a Jabra BT8010 and have been having a few issues:
1) My phone no longer turns off automatically (i.e. on standby) after the specified time in Power Management. Is there a fix?
2) The audio still skips when listening to music after installing Sleuth's A2DPfix. I found that if I reduce the BT audio quality to High using HTCTweaks I usually don't get any skipping (without Sleuth's fix). What is the best A2DP setting for WM5? I know there is a thread for WM6 A2DP settings but does it apply also for WM5?
No one has any info?
Come on guys. I really need some feedback on on Issue #1 because I usually like to leave my cell phone in my bag so right now I have to take my phone out everytime I complete a call to turn it off.
Nobody knows anything??
my xda2i works fine but whenever i hard reset and the restore (either with activesync or xbackup) my handsfree bluetooth connection to my I-tech headphones wont work, but the audio streaming still does.. this is my first post hope some one can help....looked round to see if anyone posted anything like this and not this difficulty...anybody else got this problem????
even if one of u senior members could answer just to let me know that this forum is good....
i just downloaded a new bluetooth stack for wm2003 though i use wm2003se and it works better than the one i was using pda2k_broadcom_btupgrade.cab
you dont have to fix the .skn files to get avrcp to work in either wmp or mortplayer... so thats better!
but still when i reset and restore i still have the same problem of the music playing through the bt headphones but when i try to make a call with the headset function no can hear, just a distorted tone and when i hang up the music plays again (as it should )no problem.
to get headset function back i have to reset and reload all my cabs and programs back up from scratch...and configure everything...which is a pain
i want to be able to reset and restore .......you know???????
Hi,
I have a JasJar flashed with the latest qtek rom because it support a2dp.
The problem is that I can pear my bluetooth stereo headphones and hear with all the system sounds (for example the "tick" sound opening the start menu), but when I play any mp3 (using wmp) I can only hear 1 second and then silence. After that I have to connect the BT headphones again but the result is always the same. I installed the a2dp patch (http://forum.xda-developers.com/showthread.php?t=262119) but it does not solve my problem, maybe because it is not a lag issue?!
Another strange behavior is that after using my Jasjar for a bit, a2dp does not work at all anymore...and I have to pair the device again.
Can anyone help me?
Hi alex_time,
The Gurus are still working on this. But in the meantime check this out!
http://forum.xda-developers.com/showthread.php?t=333258
http://forum.xda-developers.com/showthread.php?t=337088
KOR!