Database Users

Skype (or musik) through bluetooth - it works

go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.

Very good tip...will try that!
Cheers...!

Works on QTEK S100 with Jabra Bt 250 Headsets?

Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!

...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?

for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?

Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.

yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.

blueangel
would this work on a blueangel running WM5?

gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice

hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....

Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.

sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.

I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.

Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.

Mine is working fine. I really like the way its now.
Thanks a lot.

Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.

Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..

A2DP - How to use a bug as a Feature ?

Hi all,
I have a MDA Vario with QTek 2.18.7.7 GER ROM.
I have installed the A2DP AddOn and the following "bug".
I use the Parrot CK3100 handfree carkit - it don't support A2DP !
i have no option "Use as Wireless Stereo" with CK3100 in my PDA BT Settings.
If i start a call over the handfree car-kit and abort it during the dial progress then ALL my PDA Sounds goes over my Car Speakers and radio goes to mute - i hear for example the voice from my Navigation System and then the radio goes mute, after it, radio goes back from mute.
This is a great bug
My problem is now:
If i get a call or i start a call and if i hangup after then all Sounds goes only over PDA again and only phone calls goes over the handfree car-kit.
Only after a Softreset and with the "Dial and direct hangup trick" i get all sound over the car-kit again with correct "Radio Mute".
Can someone from this great peoples here make something that i everytime get all my sounds over the car-kit with correct "Radio Mute" ?
I don't use the BTAudio Tool because if i start it, my radio is already in mute and i can't here music.
With this nice "bug" the radio goes only in mute if there come a sound from PDA.
Please help - i need this "bug" as feature

BTaudiotoggle is your answer... but if I'm not mistaken it's 11khz so if you plan on streaming music it will disappoint you.
http://forum.xda-developers.com/vie...t=0&postdays=0&postorder=asc&highlight=toggle
and search from there...

pharz said:
BTaudiotoggle is your answer... but if I'm not mistaken it's 11khz so if you plan on streaming music it will disappoint you.
http://forum.xda-developers.com/vie...t=0&postdays=0&postorder=asc&highlight=toggle
and search from there...
Click to expand...
Click to collapse
No sorry, BTaudio toggle is not my answer.
BongoUser said:
I don't use the BTAudio Tool because if i start it, my radio is already in mute and i can't here music.
With this nice "bug" the radio goes only in mute if there come a sound from PDA.
Click to expand...
Click to collapse
I can't here any music on my car-radio with btaudio toggle.

Well... I tried it once and it did work with a parrot 3000evo.
The device was normally connected and from the moment that I started btaudiotoggle the stereo would be muted and show 'phone' just like in a call. Then just starting a mp3 player would make the sound go over the radio speakers...

pharz said:
Well... I tried it once and it did work with a parrot 3000evo.
The device was normally connected and from the moment that I started btaudiotoggle the stereo would be muted and show 'phone' just like in a call. Then just starting a mp3 player would make the sound go over the radio speakers...
Click to expand...
Click to collapse
Yes, but i don't want hear music over PDA, i want hear music over
my radio/cd-player.
And after the first phone call this "bug" won't work until i do an Softreset.

ehm.. I'm getting confused :lol:
you want to use your 9100 as a mp3 player in the car connected to your car-radio/speakers through bluetooth with the parrot carkit doing the acctual BT connect, right?
if so, this worked for me with BT audiotoggle but the quality was horrible.
If not, then please excuse me for keeping us busy with nothing

pharz said:
ehm.. I'm getting confused :lol:
you want to use your 9100 as a mp3 player in the car connected to your car-radio/speakers through bluetooth with the parrot carkit doing the acctual BT connect, right?
if so, this worked for me with BT audiotoggle but the quality was horrible.
If not, then please excuse me for keeping us busy with nothing
Click to expand...
Click to collapse
No No, i want to use car-radio for hear my music (local Radiostations).
I want only hear my navigation voice over car-speakers with car-radio mute control.
Sorry for my bad english.

your english is a lot better than my german so don't worry.
Can't help you with this though... but at least we've got the question clear!

pharz said:
your english is a lot better than my german so don't worry.
Can't help you with this though... but at least we've got the question clear!
Click to expand...
Click to collapse
ok, here is one new Info.
I don't had installed the Tor_A2DP_cert.CAB.
Now i have installed it, perhaps now it works better, or the bug come's no more
i test it later.

BongoUser said:
pharz said:
your english is a lot better than my german so don't worry.
Can't help you with this though... but at least we've got the question clear!
Click to expand...
Click to collapse
ok, here is one new Info.
I don't had installed the Tor_A2DP_cert.CAB.
Now i have installed it, perhaps now it works better, or the bug come's no more
i test it later.
Click to expand...
Click to collapse
Hmm, now i see the Menu "set as wireless stereo" but it is grayed (disabled).

That's because your car kit doesn't support a2dp or stereo BT. I have the same problem with my HS850.

IT WORKS IT WORKS.
I don't know why, but it works.
If i use bt touggle tool my car-radio goes only to mute if any sound comes over PDA.
It is not everytime in mute
Perhaps it is the A2DP Patch - i don't know.

A2DP output is not stereo

I just cannot believe my ears. I have used my Qtek S200 with a SonyEricsson stereo BT headset for months with great results (some occasional drops but very seldom). Today I bought a P3600, paired the headset and guess what? A2DP output is not stereo. I couldn't be more upset!

anonimo said:
I just cannot believe my ears. I have used my Qtek S200 with a SonyEricsson stereo BT headset for months with great results (some occasional drops but very seldom). Today I bought a P3600, paired the headset and guess what? A2DP output is not stereo. I couldn't be more upset!
Click to expand...
Click to collapse
oh... and my device have this BUG too

no point to be upset.
A2DP output set to jointstereo by default. set use jointstereo to "0" in registry to get rid of this "BUG"

SecureGSM said:
no point to be upset.
A2DP output set to jointstereo by default. set use jointstereo to "0" in registry to get rid of this "BUG"
Click to expand...
Click to collapse
Done! I love you! How can they be so stupid to set the default for a stereo profile to mono??????

SecureGSM said:
no point to be upset.
A2DP output set to jointstereo by default. set use jointstereo to "0" in registry to get rid of this "BUG"
Click to expand...
Click to collapse
GOOOOD MAN!
I create A2DP stereo activator - Download

anonimo said:
I just cannot believe my ears. I have used my Qtek S200 with a SonyEricsson stereo BT headset for months with great results (some occasional drops but very seldom). Today I bought a P3600, paired the headset and guess what? A2DP output is not stereo. I couldn't be more upset!
Click to expand...
Click to collapse
@anonimo
Hi, do you have any problems with SonyEricsson BT stereo headset? I mean, if you listen to music with player and there is coming a phone call. Does it change from music to phone and automaticaly back to phone?
I have bought a new SE hbh-ds970 and have a few problems with that point. Mostly I have (to listen to music again) to warmstart my P3600.
Any ideas?

webfrog said:
@anonimo
Hi, do you have any problems with SonyEricsson BT stereo headset? I mean, if you listen to music with player and there is coming a phone call. Does it change from music to phone and automaticaly back to phone?
I have bought a new SE hbh-ds970 and have a few problems with that point. Mostly I have (to listen to music again) to warmstart my P3600.
Any ideas?
Click to expand...
Click to collapse
I have it and no problem with windows media.

webfrog said:
@anonimo
Hi, do you have any problems with SonyEricsson BT stereo headset? I mean, if you listen to music with player and there is coming a phone call. Does it change from music to phone and automaticaly back to phone?
I have bought a new SE hbh-ds970 and have a few problems with that point. Mostly I have (to listen to music again) to warmstart my P3600.
Any ideas?
Click to expand...
Click to collapse
I haven't tried yet with the P3600 but answering calls and resuming music used to work with the Qtek S200 and the SE HBH-DS970. I will try and let you know.
One thing I found with my old setup was that when resuming music sometimes the headset volume would be set to 0 and I had to turn up the volume.
----------
PS: I have tried a couple of times now and it seems to be working. It takes a few seconds for the music to resume but it does. I think the trick is to end the call using the headset button, not the phone button.

not only in 3600!!
It looks to be a Mobile 5 feature. I found same reg key in same state pn Eten Glofiish X500. after applying change, x500 also started stereo. I am using SE stereo BT headset and it works for stereo..
May be this is disabled because it may result in bad quality on mono headsets..
AS

anonimo said:
I haven't tried yet with the P3600 but answering calls and resuming music used to work with the Qtek S200 and the SE HBH-DS970. I will try and let you know.
One thing I found with my old setup was that when resuming music sometimes the headset volume would be set to 0 and I had to turn up the volume.
----------
PS: I have tried a couple of times now and it seems to be working. It takes a few seconds for the music to resume but it does. I think the trick is to end the call using the headset button, not the phone button.
Click to expand...
Click to collapse
ok, thanky you - I will have a try again ... we will see. Did you managed with the in build pocket player?

Yes I am using the inbuilt windows media player.

I've been checkin' some things in the registry too... and i've found that "Quality" is set to '30'. Somewhere on the Hermes wiki (i think), i've read that this is only medium quality. I saw this list with diffent quality-grades, with '48' mentioned for the 'good' quality.
Does anyone know if it can harm either the headset (Jabra 620s) or the Trinity, or can i safely set it to a higher quality level ?

I stand to be corrected, but the figure of 48 seems be referring to the 'bits-per-second' of an audio stream. Based on this assumption I do not think that any damage could be done.

Hi,
I search for joinstereo in registry but no result. Would you pls post the full path in registry?
Another problem I find with my iclip, I can listen to music. But when I use phone book to dial, it just give a continuous tone. If I dial by numnbers, it works. Any similiar problem for other BT stero headset.
My mono headset has no such problem.
Trinity with iTech clip/touch/SonyE

leon100 said:
I stand to be corrected, but the figure of 48 seems be referring to the 'bits-per-second' of an audio stream. Based on this assumption I do not think that any damage could be done.
Click to expand...
Click to collapse
That's correct, should have mentioned it clearer...
It's from the key "BitPool", which is set to 30. But there's also a key called "MaxSupportedBitPool" that's also set to 30.
My actual question would be; can it do any harm if a change the "MaxSupportedBitPool"-key into 48 as well ? Cause that might just be hardware related...

mobiler2 said:
Hi,
I search for joinstereo in registry but no result. Would you pls post the full path in registry?
Click to expand...
Click to collapse
It's: HKLM\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings\
Here you'll find the key "UseJointStereo"; set it to 0.

Moaske said:
That's correct, should have mentioned it clearer...
It's from the key "BitPool", which is set to 30. But there's also a key called "MaxSupportedBitPool" that's also set to 30.
My actual question would be; can it do any harm if a change the "MaxSupportedBitPool"-key into 48 as well ? Cause that might just be hardware related...
Click to expand...
Click to collapse
Cannot really say if any damage will be done, but then what damage can be done? You could take a full backup of the device and try changing the two registry settings you mentioned. At the most perhaps no sound will be heard, in which case you can restore the device from the backup taken.

Moaske said:
It's: HKLM\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings\
Here you'll find the key "UseJointStereo"; set it to 0.
Click to expand...
Click to collapse
Got it. Thanks.

Redirecting TRINITY sound to handsfree

After reading very long threads about this issue, many changes in the registry and some full pda restores, I haven´t found the way to redirect all the sounds to the handsfree in my TRINITY.
Has anyone managed to make BTAudio or any other program work with a Trinity?

I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.

2 Types of Redirect
One is with A2DP where the bt device is compliance to it. I do not have one but I believe it will work fine.
Another way which I am using is via the Handsfree Voice Command channel. When a voice command software(Such as Cyberon Voice Speed Dial) is installed and when the recognition is triggered(usually by a button on headset), all audio is redirected to the the headset.
So the trick is to keep this redirection longer.
This is can achieved by changing two registry settings.
- Change the duration to something longer, like FFFF.
- Invalidate the voice command software execution.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdDuration"=dword:FFFF
"Path"="\WINDOWS\invalid_sddialer.exe"
With that, I have lost Voice command via my headset but I hardly do VC at all, and if needed, I had associated one of the button on my dopod to launch VC but I need to speak into the phone instead.
Not sure if this is the best way but it's the only way I know of untill I figure out other.
FYI, I'm currently using Dopod D810 with lvsw ROM (http://forum.xda-developers.com/showthread.php?t=299771) and a Motorolla H700.

anonimo said:
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
Click to expand...
Click to collapse
Hello,
I agree with this.
I had not been able to get the Trinity to redirect audio to a sony HBH-IV835 heandfree device.
Since I've change for a Sony DR-BT20NX headset with AD2P profile it's working like a charm. No more registry hack or software needed.
Then registry hack only concern improvement of audio quality (bitpool and so on).
Sadly i'm not able to use real stereo (replace the use of joint stereo) because it's generationg a slight annoying hiss sound.

Is this still the status, also with WM6?
I can't believe it's not possible to redirect some kind of way like I've been reading in the Tornado treads.

Yeah, I'm also can't redirect all sound to my headset (Plantronics Pulsar P590) by one click or by launch some program. Every time I need launch BT Settings, open Devices tab, tap'n hold on "590Plantronics", and select "Set as hands-free" or "Set as Wireless audio".
Can't find other ways to do it - no registry hacks, no other...

Does this help maybe?
http://pocketland.de/product.php?prod_id=36311
I did not test it yet...

No, it doesn;t work too... All discussed programs (BTARouter, BTAudioNav, BTAudioToggle) are just redirect phone calls to the my headset. No audio output at all (headset icon doesn't appear).

Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.

clinton said:
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
Click to expand...
Click to collapse
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...

peon said:
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
Click to expand...
Click to collapse
I saw a lot of different registry hack around here..
The one thath works on p3600 is?
I've tried a lot of but no one works.
I dont't need voice dial so it can be good.
I use my p3600 with a BT Helmet.. so I'd like to listen to tom tom inside..
thanks a lot.

Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.

jaaphooi said:
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
Click to expand...
Click to collapse
But my bike helmet is not A2DP compliant so I canìt use it.. :-(

Still no solution?
Hi you all,
is there still no solution for the Trinity?
I am actually experiencing the skipping problem, but I would be half-glad if I could redirect audio in mono to the headset.
Please advise!
IsiT_de...

Get headset that supports A2DP profile and it works fine. I have Plantronics Voyager 855 stereo, and it works flawlessly in mono or stereo mode with modifying any registry hacks. Music sounds awesome too with this headset, just like my bose earbud phones.

x7500 phone experience...

Mine should be arriving tomorrow
What are you guys using for phone calls: the included wired earbud, bluetooth headset or just the speakerphone?
Do most bluetooth headsets out there work with the included bluetooth stack?
Thanks!

Bluetooth all the way!
I am using the Plantronics Voyager 510 headset works the best for me great battery life, volume etc.

Bluetooth 99% of the time, rarely use the speakerphone. (Which does, however, work well.)
I use the BlueAnt V12, which has a vibrate feature... which is userful since the phone doesn't have one built-in. It also has an LCD, which I find useful. Displays status, phone numbers, but no names. But I seem to know most numbers, and if I don't that's also informative.
BlueAnt V12 has also a great price, around $50.

Jawbone Bluetooth works great.

I have no problems with the Jabra BT800, which also has vibrate, lcd and 6 individual ringtone settings plus the one from the Ameo. Works flawlessly.
Tim
ww?.limitz.net

Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?

andresp said:
Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?
Click to expand...
Click to collapse
If there is no headset connected wired/bluetooth speakerphone is automatically activated for a call.

fatouraee said:
Jawbone Bluetooth works great.
Click to expand...
Click to collapse
But not if you use Microsoft Voice Command 1.6. That kills the Jawbone d.e.a.d.
Aliph have confirmed it's a MVC problem.
Kevin

andresp said:
Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?
Click to expand...
Click to collapse
Yes. It takes about 5 seconds for the X7500 to realise there's no active BT connection and reroute to the speakers.

andresp said:
Mine should be arriving tomorrow
What are you guys using for phone calls: the included wired earbud, bluetooth headset or just the speakerphone?
Do most bluetooth headsets out there work with the included bluetooth stack?
Thanks!
Click to expand...
Click to collapse
Jabra BT8010. Works perfectly. Works even better if you upgrade the Jabra to 1.33 and follow the instructions elsewhere on the forum to get caller ID

apd said:
Jabra BT8010. Works perfectly. Works even better if you upgrade the Jabra to 1.33 and follow the instructions elsewhere on the forum to get caller ID
Click to expand...
Click to collapse
I have some problem with BT8010. The phone function is perfect, but i have problem with stereo function. The playback is clogging and the memories getting fall with wm player. Have you got any reason? I tried it with TCPMP, it's same problem, but memories dont fall.
(sorry my bad english!)

Zatesz said:
I have some problem with BT8010. The phone function is perfect, but i have problem with stereo function. The playback is clogging and the memories getting fall with wm player. Have you got any reason? I tried it with TCPMP, it's same problem, but memories dont fall.
(sorry my bad english!)
Click to expand...
Click to collapse
Sorry, works perfectly for me. Anyone else have any ideas?

bt
i use bluetooth most of the tyme wen out...although speakerfone quality is also pretty good...one way to use it as an earpiece is to make the volume REAL LOW...and then out it to the ear...although still some sound duz appear to the outside...!

kevinnugent said:
But not if you use Microsoft Voice Command 1.6. That kills the Jawbone d.e.a.d.
Aliph have confirmed it's a MVC problem.
Kevin
Click to expand...
Click to collapse
Thanks for the warning. I am just about to try 1.6 on my Jawbone.

Found this comment here - http://www.wmexperts.com/reviews/bluetooth_headsets/review_aliph_jawbone_bluetooth.html
Try creating the registry key:
HKLM\software\microsoft\voice command\speech\BluetoothPTTDelay
value = dword: 2000
Stop and start Voice Command.
I have found that this makes Voice Command 1.6 work great with the Jawbone even in the noisiest enviornments. This will open up the audio channel for 2 seconds before starting a voice command interaction as opposed to the 400ms that is the default. I think possibly the Jawbone is adapting to the ambient noise during this time. This seems to make a big difference though.
Let me know if this helps as my Jawbone will be arriving shortly.

Anyone used a stereo headset and liked it? I wouldn't mind having one that would go one ear for calls and a simple way to use both for listening to music/movies.

Pantaloonie said:
Found this comment here - http://www.wmexperts.com/reviews/bluetooth_headsets/review_aliph_jawbone_bluetooth.html
Try creating the registry key:
HKLM\software\microsoft\voice command\speech\BluetoothPTTDelay
value = dword: 2000
Stop and start Voice Command.
I have found that this makes Voice Command 1.6 work great with the Jawbone even in the noisiest enviornments. This will open up the audio channel for 2 seconds before starting a voice command interaction as opposed to the 400ms that is the default. I think possibly the Jawbone is adapting to the ambient noise during this time. This seems to make a big difference though.
Let me know if this helps as my Jawbone will be arriving shortly.
Click to expand...
Click to collapse
Why do you need to go through all athat gymnastics? I just installed voice command and it worked with Jawbone without any issues. I can't complain about battery life because I use my jawbone and Athena as regular phone, even in my open office. Maybe total 2 hours +- 30 minutes. Don't need 6 hours talk time yet I have never run out of battery yet. I charge both devices every night.