Related
The idea of this post is to make a statistic research about the battery drain problem. Maybe this will make us understand the cause of the battery problems -since I couldn't find something that solved the battery problems of all users.
I have checked these posts (and some others)
http://forum.xda-developers.com/showthread.php?t=295191
http://forum.xda-developers.com/showthread.php?t=287165
and the "Battery SOLVED" topic
There are 3 solutions (they are post in Faria Wiki)
-One is mess with the keys
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
...
-Another is mess with the key
HKLM/Drivers/SDCARD/ClientDrivers/Class/SDMemory_Class/DisablePowerManagement
-And a third solution is to Flash a ROM with FULL battery & let it drain comletelly afterwards.
---------------------------------------
Using the "battery status"today add-on I can say this:
The first time I installed faria 3.3 ROM I had huge memory drain problems
I notised that even in stand-by my phone "ate" about 124mA
The registry memory tweaks didn't change this much - maybe 118mA.
The battery in this codition lasted at most 18hours...
I reflashed Faria3.3 with the mobile FULLY charged,let it discharge fully and now I have 84mA consuption if phone goes to sleep and 97mA when not used. Now battery lasts about 48hours without much usage.
With the [HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms] etc keys changed and with manually shutting down the Wireless Monitor Service(WMS7) was 42mA .
Note: I have Faria3.3 ROM & GSM 2.19 .
In another mobile phone I checked, with 2.17 OS rom & GSM 2.06.10 radio, I see that the when phone is not used the battery drain is 24mA !!!!!
This phone does NOT have the registry tweaks enabled and even with backlight it still stays in 24mA..
Please, post your mA consumption here and say what you have enabled.
Btw, anyone knows why Wireless Monitor Service(WMS7 was enabled (started) even though I have turned off WiFI,bluetooth & IRDA?
152mA, was ALOT higher when i had 5+ programs running, around 200
I have Faria's WM6 and run about 57mA in standby, 125 during normal operations.
Here is my first contribute to this outstanding forum.
Hope this is usefull insearch of the power drain on some devices.
Note:
My phone does NOT have the powermanagement registry tweaks enabled.
And is an clean install with the Faria WM6 (The real Thing) rom.
So there ain't much running.
Just ordered Wisbar Advanced + desktop so hope to see more readings later this week after fully fine tuning my device.
My device
Orange SPV - M3000 Faria WWE WM6 (G3 Unlocked)
IPL/SPL: 2.26
Radio: 2.61.11
ROM: 2.18.0.0
OC: CpuScaler - 130<->273mhz By BatteryStatus
Startup Services
CapNotify
SIPChange (Resco Keyboard)
Startclean
Today Plugins
BatteryStatus incl Tray applet
Running Hardware
Bluetooth= off
GPRS= off
Radio= on
WiFi= off
IR= off
Power drain Bat= 100% charged
Wakeup: 70mA (after 5 <-> 10 minutes)
Softreset: 258mA
Hardreset: 350mA
Standby + 50% backlight: 302mA
After charging: (and pulling the plug out) 180 -> 250 mA
All readings do not change until i manualy interrupt the current status off my device.
I mean if my device after wakeup says 219mA the reading does not change even when i run different software apps.
Even if the CpuScaler clocked 130mhz the reading will not change.
I think that BatteryStatus is broken or something else is interfearing with the readings.
i went from 175mA to 125mA... just by going from 0 to 1 with the next tweak:
HKLM/Drivers/SDCARD/ClientDrivers/Class/SDMemory_Class/DisablePowerManagement
i use Fario's rom..
trying other tweaks now..
ok:
so without doing anything it just suddenly dropt back to 64mA.... :\
ok:
booting takes 280mA
I recommend not to use these ::: they sucked out my battery even more.. from 125 to 247
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\PPTP1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\L2TP1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0
Today i did made two changes on my device and noticed the following.
First i updated my Radio rom from 2.19.11 to 2.61.11. (No errors everything works fine)
I just wanted a better radio because the signal strengh overhere is verry bad.
This update has on my device an nice site effect.
Powerdrain dropped by several mA.
Wakeup: 61mA (after 5 <-> 10 minutes)
Softreset: 201mA
Hardreset: 299mA
Second i messed with the key
HKLM/Drivers/SDCARD/ClientDrivers/Class/SDMemory_Class/DisablePowerManagement
I did not notice any effect on this reg tweak
I am using Wizard 100 ( Cingular 8125)
EDGE ON 24x7
Fetch mail using poutlook every 10 minis
Notification & Task Running
WiFI OFF
decient battery life: fully charged battery comes to 1.5 days..
--tux
i dont know what i did.. but its at 42mA right now.. and sins my last post.. it was @ 76% battery.. and right now its @ 75%... that means more then 12 hours have passed.. and its only down by 1 %...
last post was @ 01:30 PM...
WOW!!!!!!!!!!~!!!!!!!!!
like i said.. it took a really long time for 1 %..
but the moment i sent an sms message... it went from 75% to 71%..!!!
damnnn
Seems as if batterystatus is broken: my readings dont update either: it seems stuck at the same mA-value all the time, no matter what I do, or which clockspeed I use...
Also: the powermeter keeps at 99% (had been 83% as well); it never changes : (
My battery from 100% to drop to 99% might take 8-12 hours , then from 99% to 90% might take few hours (maybe 1-3 hours).
This seems to be normal.
I'm using the mA consumption because if you have an 1250mA battery I think this is the best unit to measure battery.
My apologies, but which program are people using to measure battery life consumption and how does one tell which program is causing the problem? In the past week, I have noticed my battery life take a nose dive and I'm wondering if it is pRSS Reader that causing my problem. I installed a power saving cab found on this forum site and I will test it tonight. Thanks for the help.
It might also be worth considering usage of GPRS, Push email, WiFi, BT, etc.
Curious D said:
My apologies, but which program are people using to measure battery life consumption and how does one tell which program is causing the problem? In the past week, I have noticed my battery life take a nose dive and I'm wondering if it is pRSS Reader that causing my problem. I installed a power saving cab found on this forum site and I will test it tonight. Thanks for the help.
Click to expand...
Click to collapse
Be careful of power saving cabs. Some of them actually increase battery consumption.
I think most people are using battery status to check consumption.
BTW:
At wake up: 24-30 mA
When the phone has a signal, the consumption rate is low 24-30 mA throughout the day. When it is searching for a signal (normally at my work), the consumption is substantially grater. When I get back home the consumption goes back down to the normal 24-30 mA (I always have a signal at home).
calouro said:
BTW:
At wake up: 24-30 mA
When the phone has a signal, the consumption rate is low 24-30 mA throughout the day. When it is searching for a signal (normally at my work), the consumption is substantially grater. When I get back home the consumption goes back down to the normal 24-30 mA (I always have a signal at home).
Click to expand...
Click to collapse
Did you ever perform the antenna hack(i.e. adding xtra piece of foil) on your Wizard?
MethodMan said:
Did you ever perform the antenna hack(i.e. adding xtra piece of foil) on your Wizard?
Click to expand...
Click to collapse
No,
I never applied the fix.
I haven’t done enough research on the fix to justify applying it. Maybe when I get some extra time.
The signal goes in and out at work, so it's not a big deal for me!
Running an 8125 with Faria's WM5 3.3 ROM.
When I wake it up it's usually 51, or somewhere in the 50's anyway.
I just tried those powermanagement reg tweaks and had terrible results too :\
My wizard can last 3 days with moderate usage of wifi, phone calls, and movies. This happened after I followed the Battery Solved thread and reflash with official ROM and then I installed Xplore1.1. And for the first cycle after first time after fully charging overnight, I can get the 3days of continous battery life..
Since then, I have been monitoring CPU usage and it hovers around 1-5% (Battery status) when idle... Bear in mind that the current consumption value can be around 33mA to 150mA and still battery life seems to be good...
Weird but through...
calouro said:
Be careful of power saving cabs. Some of them actually increase battery consumption.
I think most people are using battery status to check consumption.
Click to expand...
Click to collapse
Thanks for the warning. I used the power saving cab that was posted from a link at the beginning of the thread.
http://forum.xda-developers.com/showthread.php?t=295191
(Second post)
Is that one okay? I'm not sure if it worked since I used my phone alot this evening. I have the standard ROM that came with the phone back in October. Thanks.
I get the solution for Battery Performance
jtrash said:
The idea of this post is to make a statistic research about the battery drain problem. Maybe this will make us understand the cause of the battery problems -since I couldn't find something that solved the battery problems of all users.
I have checked these posts (and some others)
http://forum.xda-developers.com/showthread.php?t=295191
http://forum.xda-developers.com/showthread.php?t=287165
and the "Battery SOLVED" topic
There are 3 solutions (they are post in Faria Wiki)
-One is mess with the keys
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
...
-Another is mess with the key
HKLM/Drivers/SDCARD/ClientDrivers/Class/SDMemory_Class/DisablePowerManagement
-And a third solution is to Flash a ROM with FULL battery & let it drain comletelly afterwards.
---------------------------------------
Using the "battery status"today add-on I can say this:
The first time I installed faria 3.3 ROM I had huge memory drain problems
I notised that even in stand-by my phone "ate" about 124mA
The registry memory tweaks didn't change this much - maybe 118mA.
The battery in this codition lasted at most 18hours...
I reflashed Faria3.3 with the mobile FULLY charged,let it discharge fully and now I have 84mA consuption if phone goes to sleep and 97mA when not used. Now battery lasts about 48hours without much usage.
With the [HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms] etc keys changed and with manually shutting down the Wireless Monitor Service(WMS7) was 42mA .
Note: I have Faria3.3 ROM & GSM 2.19 .
In another mobile phone I checked, with 2.17 OS rom & GSM 2.06.10 radio, I see that the when phone is not used the battery drain is 24mA !!!!!
This phone does NOT have the registry tweaks enabled and even with backlight it still stays in 24mA..
Please, post your mA consumption here and say what you have enabled.
Btw, anyone knows why Wireless Monitor Service(WMS7 was enabled (started) even though I have turned off WiFI,bluetooth & IRDA?
Click to expand...
Click to collapse
Dear,
I have upgraded my HTC Touch from WM 6.0 to 6.1. I have faced the big problem of Heavy Battery Drain. I was confused. I try to find out the solution over XDA Forum.
My problem was, "after charged 100%, then after 5-10 menutes it goes to 80%. and then it start draining very fast."
I have changed the registry for :
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\PPTP1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\L2TP1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0
and Set the Wireless Monitor Service from Automatic to Manual.
But, I still have the same problem, why after 100% charged & after unpluged it goes to 94% thereafter 88% and within 5 menute it goes to 80%.
Thanks to the XDA Forum Members, help me out.
Mehul Patel
So I've had my Touch "enhanced" for a bit over a week and I'm having some annoying issues regarding battery life. I'm charging this thing once at least once a day, twice a day when I'm using it a bunch. I've messed with the power settings, and the phone goes into standby after 2min. The only 3rd party software I have is touchpal, everything else is factory. I was just trying to gauge some input from other users. I did call HTC, and was greeted by an ass of a warranty tech, who, after getting my problem explained to him proceeds to ask me what I want him to do. Wow. Then he tells me that a new battery won't be instock for two weeks! How frustrating!
Thanks in advance.
You should get at least a day even with medium-heavy use. Up to two days on average.
If you install the excellent Chi-Dai Battery status plug-in then that will monitor the power drain on your battery. It will tell you if the problem is software or the battery itself.
Doctor Mick said:
You should get at least a day even with medium-heavy use. Up to two days on average.
If you install the excellent Chi-Dai Battery status plug-in then that will monitor the power drain on your battery. It will tell you if the problem is software or the battery itself.
Click to expand...
Click to collapse
Thanks, I was about to download something to moniter the consumption. I'll give it a shot when I get home from school
I have the same issue with my battery. I use it for med-heavy. By the end of the day Im at like 15%. That sux.
I've installed S2U2...does this application drain the battery also?
monitoring your battery life won't do anything when you want to increase it
if you want to save battery life
it's likely that you have your wireless radio's turned on while they don't have to be,
go to your comm manager
WI-Fi drains A LOT of power and should be on only when you plan on using the internet
your GSM phone radio can also be turned off, useful when you're not in an area covered by your carrier when this happens your device panics and sends out signals to connect to the antenna tower this extra cell phone activity is bad for your battery life... and your sperm count
bluetooth takes an insignificant amount of energy to power
lastly pressing the lock button on the device is useful because it turns off the screen but keeps the device on using these features allows me to have my device unplugged for 2 days
the cheshire cat said:
monitoring your battery life won't do anything when you want to increase it
if you want to save battery life
it's likely that you have your wireless radio's turned on while they don't have to be,
go to your comm manager
WI-Fi drains A LOT of power and should be on only when you plan on using the internet
your GSM phone radio can also be turned off, useful when you're not in an area covered by your carrier when this happens your device panics and sends out signals to connect to the antenna tower this extra cell phone activity is bad for your battery life... and your sperm count
bluetooth takes an insignificant amount of energy to power
lastly pressing the lock button on the device is useful because it turns off the screen but keeps the device on using these features allows me to have my device unplugged for 2 days
Click to expand...
Click to collapse
2 DAYS UNPLUGGED? Are you kidding me. On standby or using it. Im thinking this battery is horrible. If I dont plug in every night, im in trouble.
If you want to increase the lifetime, use Battery Status software and activate CPU Scaler, it's great!
Before: I used only 201Mhz freq, my battery had a lifetime of 1 day using it normally.
Now: I've overclocked it to 260Mhz with CPU Scaler activated (low: 99Mhz, average: 201, max: 260) and my touch can stay 3 days without charge need.
I still use these settings but I have a unlimited data contract with my operator, so my touch is connected all the time to Edge (push mail and weather updates), and with these settings I have to charge it every day. Don't care about this since I work with a PC all the time.
I think if I used all the time the original freq, I'd have to charge it more often...
CPU scaler
I have Battery Status ver. 0.5 but don't see CPU scaler, is it only available in the Beta version?
1 to 2 days of life with normal-full use. Up to 4-6 days in standby with almost no use
Bingoig11 said:
If you want to increase the lifetime, use Battery Status software and activate CPU Scaler, it's great!
Before: I used only 201Mhz freq, my battery had a lifetime of 1 day using it normally.
Now: I've overclocked it to 260Mhz with CPU Scaler activated (low: 99Mhz, average: 201, max: 260) and my touch can stay 3 days without charge need.
I still use these settings but I have a unlimited data contract with my operator, so my touch is connected all the time to Edge (push mail and weather updates), and with these settings I have to charge it every day. Don't care about this since I work with a PC all the time.
I think if I used all the time the original freq, I'd have to charge it more often...
Click to expand...
Click to collapse
Can you please give me more info on the battery status software and cpu scaler?
Do you have an Elf or Elfin?
I've an Elfin.
Battery Status is a today plugin you can configure and use to overclock and set CPU Scaler.
Here is in attachment the version I use
Overclock and CPU Scaler are only available for OMAP processors, so for Elf/Elfin it will work.
Bingoig11 said:
I've an Elfin.
Battery Status is a today plugin you can configure and use to overclock and set CPU Scaler.
Here is in attachment the version I use
Overclock and CPU Scaler are only available for OMAP processors, so for Elf/Elfin it will work.
Click to expand...
Click to collapse
Can you give me some more info about how you have it configured. Most people with Elfin are having problems with this software. It seems to not work for CPU scaler. Any feedback from your experience.
PS- I have the HTC Touch enhanced unlocked.
the cheshire cat said:
monitoring your battery life won't do anything when you want to increase it
if you want to save battery life
it's likely that you have your wireless radio's turned on while they don't have to be,
go to your comm manager
WI-Fi drains A LOT of power and should be on only when you plan on using the internet
your GSM phone radio can also be turned off, useful when you're not in an area covered by your carrier when this happens your device panics and sends out signals to connect to the antenna tower this extra cell phone activity is bad for your battery life... and your sperm count
bluetooth takes an insignificant amount of energy to power
lastly pressing the lock button on the device is useful because it turns off the screen but keeps the device on using these features allows me to have my device unplugged for 2 days
Click to expand...
Click to collapse
I turn off the wi-fi when I'm not at home. I'm always within service area, so the GSM radio stays. I don't use bluetooth. It's set to go into standby mode after 2mins. On Thursday, I took it off of the charger at 8:30am had a couple classes till 3pm, so light-to-medium use. It was dead by 3:30pm. I did install BatteryStatus later that night, and figured out the scaler, and it helped the next day. But honestly I shouldn't have to underclock it in order for it to last even a day, a bit ridiculous to me.
enaime said:
Can you give me some more info about how you have it configured. Most people with Elfin are having problems with this software. It seems to not work for CPU scaler. Any feedback from your experience.
PS- I have the HTC Touch enhanced unlocked.
Click to expand...
Click to collapse
I have a Touch enhanced, and am using the CPU scaler just dandy. Just play with the settings a bit, and you'll get the hang of it. Try LOW:100 and HIGH:234, to start out, then go from there.
TIGman said:
So I've had my Touch "enhanced" for a bit over a week and I'm having some annoying issues regarding battery life. I'm charging this thing once at least once a day, twice a day when I'm using it a bunch. I've messed with the power settings, and the phone goes into standby after 2min. The only 3rd party software I have is touchpal, everything else is factory. I was just trying to gauge some input from other users. I did call HTC, and was greeted by an ass of a warranty tech, who, after getting my problem explained to him proceeds to ask me what I want him to do. Wow. Then he tells me that a new battery won't be instock for two weeks! How frustrating!
Thanks in advance.
Click to expand...
Click to collapse
Visit the Kaiser forum. We're having the same issue. GPS seems to be the problem with me. As soon as I turned on GPS, it sucked my battery 5% in 5-7 minutes. Then down to 73% from 97% in 3 hours.
enaime said:
Can you give me some more info about how you have it configured. Most people with Elfin are having problems with this software. It seems to not work for CPU scaler. Any feedback from your experience.
PS- I have the HTC Touch enhanced unlocked.
Click to expand...
Click to collapse
I didn't configure anything particular, just installed it and set the overclock and CPU Scaler.
I talk an average of 2 hours daily. Since 6 am until 8 pm. I always get home with 15% or less. Using batt status with omap overclocking to 247. Average use of pda also.
Bingoig11 said:
I've an Elfin.
Battery Status is a today plugin you can configure and use to overclock and set CPU Scaler.
Here is in attachment the version I use
Overclock and CPU Scaler are only available for OMAP processors, so for Elf/Elfin it will work.
Click to expand...
Click to collapse
Right on brotha. It worked great! I was wondering whats the lowest low you can use to conserve battery? Im at 98-low 247-high, using CPU scaler.
enaime said:
Right on brotha. It worked great! I was wondering whats the lowest low you can use to conserve battery? Im at 98-low 247-high, using CPU scaler.
Click to expand...
Click to collapse
Im on 87/201/247 and boost to 260MHz, everything works fine, only some flickering when it runs on 87MHz..
But the battery life is quite good as it lasts for 2 to 3 days (light to medium usage, some texts, some phone calls, seldom Wifi)..
I have to say that the stock battery lasts much less then the one I got from Brando.. although the amperage is the same
I finally use xcpuscalar only for conserving battery, not for overclock. In another threads some people suffering from spotted, patched even broken LCDs and I do not take the risk to overclock Elfin because of possible overheat of the CPU and the CPU is most likely very close to the LCD due to the thinness of the Elfin. If the CPU is hotter overclocked than it is on normal speed it could cause spot, patch or even damage on LCD. This is my opinion.
Xcpuscalar is able to downgrade dynamically the CPU speed against Batterystatus which is only able to set one speed for the CPU, that's why I chosen xcpuscalar.
It seems to work fine even after soft reset... but 87MHz is very slow for me... it speeds up very sluggish. I use 169, 182 and 195MHz settings.
Will see the energy spare on the battery.
Hi,
Ive recently installed Android 2.2 Froyo on an SD card on my HD2 and the battery is going down so quick... it wasnt great in Windows mobile but now I'm struggling to get it to last all day...
I'm saying to myself this cant be normal, I'm also trying a Samsung Galaxy S and the battery is so much better!!
Is there anyway I can improve the battery power on my HD2, I know in a HD2 the battery is a 1350mah and the Galaxy S is a 1500mah battery.
Should that make such a difference?
I'm considering going back to Win Mobile but dont really want to but havent got any other choice if the battery carrys on like this....
I also notice the screen and back get really quite warm... I suppose Android is making the system work harder?!?!?!
Its safe to say that you havent read any of the threads about battery life.
Before you say I did a search and didnt find anything Ive already typed in battery in search and found a bunch of threads.
Now what you need to do is find out why its running so warm.
It could be the kernal version you are using.
Ways to improve battery life are using setcpu and underclocking. A lot of members use current widget as a method to see when High drain is occuring.
In sleep mode you should be seeing less than 10ma. If you dont see less then this there is a problem.
Set current widget to 1 min intervals.
Dont use task killers they dont help anything no matter what anyone says.
Dont compare the captivate to the hd2. 2 different phones.
I am using mccm 1.5 customize, and CurrentWidget shows 5mA on standby which I think is good enough. Sometimes, it shows 60mA on standby in a while and my battery drains very fast, even I use Advanced Task Killer but it does not help. I have to reboot the phone to get it back to 5mA on standby.
Anyone has any idea of what may cause my standby power that high (60mA)?
Thanks.
hazard99 said:
Its safe to say that you havent read any of the threads about battery life.
Before you say I did a search and didnt find anything Ive already typed in battery in search and found a bunch of threads.
Now what you need to do is find out why its running so warm.
It could be the kernal version you are using.
Ways to improve battery life are using setcpu and underclocking. A lot of members use current widget as a method to see when High drain is occuring.
In sleep mode you should be seeing less than 10ma. If you dont see less then this there is a problem.
Set current widget to 1 min intervals.
Dont use task killers they dont help anything no matter what anyone says.
Dont compare the captivate to the hd2. 2 different phones.
Click to expand...
Click to collapse
Thanks for your tips for better battery life. I was curious about a few things and hope you could clarify a few things for me and some instruction or threads on how to do so. And yes I have searched, that's the first thing I always do before I do anything web based as far as positng.
1. How do you setcpu and underclocking?
2. How do you find the amount of battery that standby takes? i.e. 60mA? How do you get to that setting in android?
Thanks for your help in advance.
Setcpu is an app used to control your cpu speed.
link included
http://forum.xda-developers.com/attachment.php?attachmentid=394848&d=1283568967
the setcpu dev's site with complete info on how to use it.
http://www.pokedev.com/setcpu/
To check ma's use (current widget)
http://forum.xda-developers.com/showthread.php?t=776085
long press on the desktop and apply current widget. It will ask you if you want to create a log. Create a log for 1 min intervals. Put the phone to sleep and leave it for a good 5 mins.
You can then open the log file usint astro file manager and check your drainage while sleep.
One thing I found is that If i am having high drain i turn my gps on and restart then it usually settles down and I can turn the gps off.
If you have apps that are syncing you will a higher than normal drain during those times the apps sync. if you set your apps to sync at longer intervals the amount of batter drain will be unnoticable.
I have major battery ocd. I constantly check my battery and have to force myself not to look but still use my phone as any normal person would.
I can pull more than 12 hours easy!
Thanks hazard99!
The first time I ran android I don't think I've had any battery issues and now that I'm looking at the percent on my homescreen Im beginning to feel battery OCD too. It's like I lose 1% atleast every 15 minutes when I look at my screen. But I did take and apply all the tips you told me and I do see that it only uses 5ma when screen is off. I truely don't understand. :/
Stop looking at your screen. Stop worrying. The more you look the more juice you use while the screen is on. There will be more points where the phone is off.
traithudo said:
I am using mccm 1.5 customize, and CurrentWidget shows 5mA on standby which I think is good enough. Sometimes, it shows 60mA on standby in a while and my battery drains very fast, even I use Advanced Task Killer but it does not help. I have to reboot the phone to get it back to 5mA on standby.
Anyone has any idea of what may cause my standby power that high (60mA)?
Thanks.
Click to expand...
Click to collapse
Ive also been trying to investigate this, my standby drain is usually 60+ mA, and during use it jumps to the 200's, strange stuff indeed....For you to have 5mA, lol i wish that was for me too =/
otakubakaa said:
Ive also been trying to investigate this, my standby drain is usually 60+ mA, and during use it jumps to the 200's, strange stuff indeed....For you to have 5mA, lol i wish that was for me too =/
Click to expand...
Click to collapse
What radio and wm are you using? Do you use SetCPU?
I had high battery consumption, too. But now I found something interesting...
Due I'm not allowed to post links, yet, search for the post with topic:
[SOLUTION] Possible solution for heavy battery drainage.
With this fix: over night I only lost 20% instead of 59% of battery.
uninstall SetCPU
10507 said:
What radio and wm are you using? Do you use SetCPU?
Click to expand...
Click to collapse
im using the same radio as you (2.10), energycookie rom 21916, and my setcpu is at interactive 245/729, and for sleep its at 245/384, hastarin kernal.
Use a Battdrv.dll from older HD2 ROM 1.48 Etc. I'm not sure if you recmod the module and replace the current one in Windows if you will get the same benefit as if you cooked the driver in.
i just updated my kernal to the latest zimage in mattc's froyosense's evo tree, and my standby is around 6-11 ma now, guess that solved some issues lol, anyone know whats the normal operating ma power consumption for texting?
EDIT: Now when i try to enable wifi i simply get "error", did i mess up on something? =/
EDIT: Solved above problem. WOOT!
i'm playing with different rom
at the moment i have discarded all the rom that give me problem (even if some of theme was very goood!!)
now i have installed on SD -=MDJ FroYo HD v.4.6=- with different kernel.
very good...responsive..everything works (except automatic brigtness features)
my question is?
how can i understand if the power consumption is too much?
of course i will keep installed for few days and see if is compatible with my usage but i would like to know some "avarage" values in order to understand immediatly where i am.
Install CurrentWidget.
Set it to log the MA once every 10 minutes.
Normal usage varies anymore from 100 to 350ma, depending on what you're doing. I believe it might be higher if you're using the camera.
Standby should be as low as 1 ma to 5ma with wifi and bluetooth turned off.
arghh in stand by it almost impossible to have less then 5mA...im using Battery Monitor app and it's normally 5mA stable with very minor increase.
i will see on the real use if it's work or not.
So I have the rev11 nexus 4 and it seems to have pretty awful battery life.. I'm running cm10.1 with the latest faux kernel with the faux clock app all set up: min clock is 594, max set at 1.35, intellidemand governor, eco mode and snake charmer on, voltage at -50mV, as well. I can't fit hardly any apps on this phone because I mistakenly got the 8gb version and can barely fit all the pictures and videos and music.. So no rouge apps or anything effecting the battery (I've already checked). The phones battery is at 40c, and CPU temp at 56c. Because of this, even when I have my phone set up the way it is and the brightness all the way down, I still only get 3 hours MAX of on screen time before it shuts off, completely dead. I've had this phone for a month but I'm about to call for yet another replacement (first one was defective but still had really good battery life). Does anyone have similar issues and should I definitely call and try to get a replacement?
BravoMotorola said:
So I have the rev11 nexus 4 and it seems to have pretty awful battery life.. I'm running cm10.1 with the latest faux kernel with the faux clock app all set up: min clock is 594, max set at 1.35, intellidemand governor, eco mode and snake charmer on, voltage at -50mV, as well. I can't fit hardly any apps on this phone because I mistakenly got the 8gb version and can barely fit all the pictures and videos and music.. So no rouge apps or anything effecting the battery (I've already checked). The phones battery is at 40c, and CPU temp at 56c. Because of this, even when I have my phone set up the way it is and the brightness all the way down, I still only get 3 hours MAX of on screen time before it shuts off, completely dead. I've had this phone for a month but I'm about to call for yet another replacement (first one was defective but still had really good battery life). Does anyone have similar issues and should I definitely call and try to get a replacement?
Click to expand...
Click to collapse
Battery drain is mostly caused by installed user apps running in the background and/or sync settings. Have you installed BetteBatteryStatts to see what consumes most energy? Also install CPU Spy for deep sleep issues.
gee2012 said:
Battery drain is mostly caused by installed user apps running in the background and/or sync settings. Have you installed BetteBatteryStatts to see what consumes most energy? Also install CPU Spy for deep sleep issues.
Click to expand...
Click to collapse
Well as I said in my post there are no rogue background apps. The only apps I even have installed are reddit, fauxclock, cpu spy, and xda. I've looked and no internal processes use up much battery also. It's just the screen which is on the lowest brightness setting that seems to suck all the battery which usually doesn't even last three hours.
BravoMotorola said:
Well as I said in my post there are no rogue background apps. The only apps I even have installed are reddit, fauxclock, cpu spy, and xda. I've looked and no internal processes use up much battery also. It's just the screen which is on the lowest brightness setting that seems to suck all the battery which usually doesn't even last three hours.
Click to expand...
Click to collapse
Maybe a faulty battery, i get 3,5 to 4 hours screen on time with 50% brightness. Running stock rom and kernel atm.
I haven't had any battery drainage with my N4, but with my previous phone I did. In most cases when I had that type of drain, I would reflash the radio or flash a different one and that would cure it. I'm not sure what would cause the drain, but I was flashing different roms and at some point radio performance would drop off. I have seen some complaints with severe battery drainage with the N4, but I haven't seen anyone trying a fresh radio install. Might not help, but could be worth a shot.
fernandezhjr said:
I haven't had any battery drainage with my N4, but with my previous phone I did. In most cases when I had that type of drain, I would reflash the radio or flash a different one and that would cure it. I'm not sure what would cause the drain, but I was flashing different roms and at some point radio performance would drop off. I have seen some complaints with severe battery drainage with the N4, but I haven't seen anyone trying a fresh radio install. Might not help, but could be worth a shot.
Click to expand...
Click to collapse
I think what I'm going to do is just flash it back completely to stock and just use it for a week without installing anything. If I still only get 3 hours of screen on time I will try to RMA it. There just has to be something screwed up with this phone though because my last phone with the same settings applied got at the very least 5 hours of screen on time. When I can't even go through half a day on this phone with normal usage, even after tweaking and cutting performance along with always having low brightness then I think there is a problem.