Need help with Activesync FAST - 8125, K-JAM, P4300, MDA Vario General

ok for the past few days i cannot sync with activesync and i dont know why. I have the tmobile mda and i am currently running farias 3.3 rom. Im using activesync 4.5. it has been fine in the past until a few days ago. it would connect but will not sync anything. I did a hard reset on my phone adn uninstalled activesync and reinstalled it and still nothing. Any advice??

Activesync can be manually initiated on the pc end sometimes. Try going Start-Control Panel-Administrative Tools-Computer Management-Services-DHCP-Start.
I do this whenever activesync temporarily misbehaves.

Don't panic my friend. A lot of times this happens for one really simple reason. The Wizard won't allow the connection. Try doing this on your Wizard:
Start / Settings / Connections / USB to PC / uncheck "Enable advanced network functionality" / Close
This should work immediately if it is the problem.

a BitDefender update around the date of your post messes up Activesync:
http://forum.bitdefender.com/index.php?showtopic=109&pid=1044&st=0&#entry1044

Firewall get changed or updated by chance? Your problem sounds quite familiar to one I've encountered with my firewall.

Related

Activesync 4.1 - not working

Can anyone help please?
I cannot get my xda mini to sync. Basically it just keeps running and nothing happens.
I have researched a lot of threads which refer to setting up a dummy server connection for what I presume is the the "exchange server" which I have attempted - is this a false IP address please?
On my PC, activesync diplays Exchange Server and my XDA with a list of the sync items below.
I keep getting a message on the XDA saying it cannot retrieve an IP address for the connection. Sometimes when I sync the try to connect via GPRS
I do have a wifi connection set up which now works (most of the time).
TIA.
I have the same problem as you with my QTEK 9100. Sometimes it works to connect the device to my portable computer (Compaq Presario 2800) via ActiveSync but mostly it does not. ActiveSync just keep looking for the device but doesnt find it.
I have also tried after that I have turned off the firewall and antivirus software, but it still doesnt work. The few (2-3 times) that it did work I had my firewall and antivirus running.
Anyone have an idea what I should do? It's a brand new QTEK 9100 (just got it a few days ago) with ROM 1.3.7.13 SVE, ROM date 9/29/05. Since I can't connect my device to the computer I can't upgrade the ROM.
turn off your firewall
disable your onboar intell wifi card if you have one
Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?
nolovelust said:
turn off your firewall
disable your onboar intell wifi card if you have one
Click to expand...
Click to collapse
thanks but as I said I have turned off the firewall, and I don't have a built in wifi card in the laptop.
macrinus said:
Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?
Click to expand...
Click to collapse
Yes it is the same problem no matter of the soft reboots. The only times I get it to work is when I have reinstalled the activesync 4.1 software on my laptop, after a reboot (of the laptop) it does not work; instead it only display a network icon with "Limited or no connectivity" (this is also without both firewall and antivirus installed) when I connect the device. The result is that AS can't find the device...
My theory is that it somehow looses the USB drivers installed with ActiveSync 4.1 when I reboot the computer. Anyone know how to fix this? Which (dll?) files belong to the USB drivers? I might be able to manually replace them in the correct path if I find that out...
any news??? I just met the same problem
simple enuf chaps...
i just met the same problem and the fix is pretty simple...
remove a/s 4.1
re-install a/s 3.7 / 3.8.1
re-establish the partnership
re-install 4.1
How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter
I am using Dopod 838, the asia version of Qtek9100.
I also seems to have problem on activesync 4.1 which keep on sync and fail to connect. When it fail. I will try
1) In Windows Task Manager, kill wcescomm.exe
2) Kill everything in wizard
3) manually turn-on activesync4.1 on pc again.
4) connect wizard with PC again..
I just bought my phone for 2 days and i have to try a few more times to confirm it really helps.. may be you can give it a try too.
PeterP said:
How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter
Click to expand...
Click to collapse
you will need AS 4.0 and above for all WM5 devices
You might want to check device manager when your device is hooked up via USB and make sure there are no exclamation marks on your handheld device.
I have a laptop and I only installed ActiveSync 4.1 and it works fine. I've even re-imaged my laptop since getting the phone and wasn't a problem second time around. I also installed 4.1 on my work PC and it works fine there too.
Not sure if you can use anything older than 4.0. (Not sure the reasons why)
At work I tried to use 3.8 (Just for the hell of it) but 4.0 updates all the USB drivers and stuff. Anything below 4.0 will not recognize WM 5.0 devices as jfran said. After installing 4.x I don't know the reason or need to uninstall then install something older then uninstall and reinstall 4.x.
It should work straight after install. However I do NOT know what happens if by chance you had an older version of ActiveSync then tried upgrading to 4.x. Should work though. I know people have had success upgrading from 3.7 and 3.8 to 4.1 to use the newer Dell Axim x51v which have WM 5.0 here in my environment.
Thanks everybody for your replies,
it was after hamish_dy tip I wanted to know how to get an connection between AS3.x and a WM5 device, since I haven't been able to do so. And I also have read that WM5 needs AS 4.x in order to sync.
Have had my Qtek9100 now for a week, and have been studied this forum in detail for a solution on my problem.
Previously I had a Qtek S100 which synced with my laptop together with AS 3.8. My company uses Groupwise as e-mail system, but with Outlook 2002 also installed on laptop I got it working (also after some days of trial).
Now with my Qtek9100 nothing happends when I plug in the USB-cable. Well not true, it will connect with an IP-address and I can from AS see the filestructure on my Qtek, BUT nothing starts syncing (calendar, contacts, e-mails,etc.). I watch task-manager but nothing kicks in. Previously with my S100, mapisp32.exe always kicked in and was the magic component between outlook and groupwise. With AS 4.1 everything is dead in task-mgr. I also receive the 85010014-error message sometimes.
Have uninstalled AS 4.1 several times, cleaned out registry of AS keys, rebooted, installed AS again, reinstalled outlook, turned firewall off, turned antivirus off, soft-reseted my qtek, and so on. Have downloaded the swedish version of AS 4.1, since my Qtek has swedish language, and thought that was the reason. But no. Soon out of options and ready to take my new qtek back to the dealer.
Any help from anyone is very much appreciated.
thx in advance.
Peter
----------------------
ROM: 1.3.7.13 SVE
ROM-date: 9/29/05
Radio: 01.04.10
Protocol: 4.0.13.17
Ext Rom: 1.3.7.125
One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?
ccisn said:
One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?
Click to expand...
Click to collapse
No, manual sync does nothing.
If I can't find any solution before mid-next-week, I will find a workstation at work and load only the minimal components/applications needed and try to nail down the issue, as a last try. I work with IT myself so I'm not keen to reimage my laptop, there are just too many things to reinstall.
thanks for the advice!
Peter
Active Sync Sync via USB Resolved (well for me anyway)
Over the last month I have not been able to sync my Wizard to my laptop via USB. Via bluetooth worked a treat, but I was not able to upgrade ROM via btooth.
This morning, completely by accident I resolved the issue with USB sync'ing to Active sync 4.1.
This works for me:
1. Connect Wizard to laptop via USB (you will get the usual problem, with ActiveSync saying "Connecting" and nothing else
2. Whilst phone is still connected via USB perform soft reset on phone
3. The laptop system tray should display "Found new USB device" and then say "Pocket PC USB Sync found"
4. When the laptop / pc has finished installing software and displays "Your new hardware is installed and ready to use" Disconnect the USB cable from your Wizard.
5. Wait a couple of seconds and then reconnect your Wizard via USB and hopefully it will work.
Please let me know if this works for anyone else!
One more thing you could try before throwing it back at the salesman is to check your network connections.
Go to Control Panel and select network connections - make sure you are set to view details and look for the "Local Area Connection" that has a description of "Windows Mobile-based Device". On mine it is "Local Area Connection 3". You may have to scroll to the right to see the description.
Right click the relevant connection and then click "properties". Make sure that the following entries ONLY have a tick next to them.
Client for Microsoft Networks
File and Printer Sharing for Microsoft Networks
Internet Protocol (TCP/IP)
For some reason on mine none of them were initially selected :?
Click OK, when I did this it started syncing straight away!
Good luck!
I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............
s4vva said:
I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............
Click to expand...
Click to collapse
Hard reset has done the trick, so it turns out all problems may not be down to our pc's......
The same thing happens for me sometimes. What I have found ou this helps.
Unplug pda from sync cable. Kill all active programs on the pda. Plug in sync cable again. Viola! It syncs.
I have the same trouble, activesync just says connecting and thats it, i havent found any particular reason for it. SR does not help, just HR which is kind of overkill. Im really glad for the sprite backup software. I have tried all different things i could think of while i couldnt sync and nothing helped. I have allready about 3 HR after me.

Active Sync Problem after I-Mate Upgrade

I can't perform a sync. My computer recognizes the new device, but active sync just hangs showing a window stating: "retrieving settings..."
Any ideas as to how to fix active sync?
I already tried uninstalling active sync and performing a hard reset on my Exec, but it still end up with active sync hanging.
I have the same Problem and no Idea what to do...
OK, I was able to sync using BT. Now when I connect my Exec using USB, my Exec still won't sync via USB. I already checked the settings if I had the check mark on syncing via USB and I do. I can access my SD Card via USB, but it still won't allow me to sync via USB. Any ideas?
I know I am missing a setting somewhere. Hmmmmm.
OK, another update guys, it seems that active sync allows me to install programs without syncing, so to me this is no hindrance, as long as I can access my SD Card and install applications via USB, it's good enough for me. I guess if I want to sync I just have to use BT. But any solutions on your part is also appreciated.
Hi,
somteimes that's an issue related to firewall or antivirus.
If you're using Sygate or Kaspersky that could happen.
If you use Sygate there's a file in Buzzdev.net to solve the issue.
Hope to be helpful
durius said:
Hi,
somteimes that's an issue related to firewall or antivirus.
If you're using Sygate or Kaspersky that could happen.
If you use Sygate there's a file in Buzzdev.net to solve the issue.
Hope to be helpful
Click to expand...
Click to collapse
I don't use Sygate. I do have System Suite with NetDefense Firewall. I'll try and disable my firewall to check if that is what causing me to unable to sync via USB. But how come it allows me to access my SD Card and insatall applications if my firewall is blocking active sync. Shouldn't it be blocking all functions of active sync? I'll post my update once I disable my firewall. Thanks durius.
Hi, it's not the firewall.
BUMP,
I still have this problem.
I had the same problem
1. no Activesync exept the first time
2 no Mailsynch via wireless
3 MSN messenger wouldn't log in
I did a hard reset with the same rom and voila
everything works now.
I jus deleted the wireless remove cab from the xtended rom before the hard reset as i wanted the Wireless Today item back
I also had problems with new Rom , installed ActiveSync 4.1 ,big mistake. Rolled back to 4.0 and now all perfect.
Activesync not working after ROM update HTC Wizard (Vario)
admisi said:
I also had problems with new Rom , installed ActiveSync 4.1 ,big mistake. Rolled back to 4.0 and now all perfect.
Click to expand...
Click to collapse
Hi,
I had same problem too after installing i-mate ROM - Activesync just kept saying 'Connecting...'. I went into Device Manager, disabled the Windows Mobile card within network cards, checked for updated drivers (it didn't find any so assume this step is irrelevant) then re-enabled the network card and it all worked like a dream.
Hope this helps.
Steve
I had this same issue, drove me crazy. I managed to fix it, but I'm about to be really unhelpful as I din't fix it in a particularly scientific manner.
I was so annoyed that I did the following 3 things, in this order
1 - Went to Device Manager and unistalled Windows Mobile device #X
2 - Uninstalled Activesync build 4.1.41xx, went into \windows\system32 and deleted rapi.dll, then reinstalled version 4.1.40xx something or other
3 - Turned off my firewall
I then managed to sync the phone again, turned the firewall back on. It now syncs fine, but I do still get the msg on the PPC saying "unable to get an IP address"
I sync with two PCs, my home machine and a work laptop. I don't know if maybe I was running two different versions of activesync, but I was able to sync with the laptop even while this was going on.
From what stevegiraffes says, it appears that it was actually step 1 above that fixed the issue. The strange thing was that my PPC device name had been M5000, but after managing to get the damn thing to sync at home it became WM_Ownername again; minor point.
Very odd, but major panic now over
Happy Pi day everyone!
durius said:
Hi,
somteimes that's an issue related to firewall or antivirus.
If you're using Sygate or Kaspersky that could happen.
If you use Sygate there's a file in Buzzdev.net to solve the issue.
Hope to be helpful
Click to expand...
Click to collapse
I stand corrected. It was Windows Firewall that caused the problem. I tried disabling both my firewalls again and it worked. Thanks!
Thanks to everyone that responded. I tried all your suggestions, but in the end it was the FIREWALL after all. I am glad this was over.

Activesync Disconnects

Hi,
I have been suffering with a persistant Activesync connection problem. It usually connects and syncs fine the first time I boot my machine, but after around five minutes it almost always disconnects (though my Vario II continues to charge). Unplugging and replugging the USB cable does not work and the Activesync icon remains grey. Trying to start the connection manually either from the Vario II or from Activesync on the desktop also does not reconnect the device. In fact the only way to get it to connect again is to reboot my PC.
I'm using Activesync 4.2 downloaded from Microsoft this morning. I've tried deleting and recreating the partnerships, which does not help the issue. I've tried several USB cables which also do not resolve the issue, so I am now asking for your help.
If anyone has any insights into whaty might be happening I would appreciate your help...
Thanks,
Chris
I'm having the same problem, but in my case unplugging the cable from the device and plugging it again usually restarts the sync. Sometimes, however, I have to soft-reset to get it working again. Very annoying.
Hi Chris,
Ive had tons of issues with activesync on my works laptop..... I use a VPN and zonealarm... I used to have tno issues but since I got WM5 wich uses IP address's it always does the same thing as yours.. ive made sure the IP address is allowed in zone alarm.... my colleague also had this issue.. he managed to solve it by using a differnet USB port as his laptop has 3 one is on the side of the machine ... try using a different USB or disable zone alarm if you use it this could be causing the problem.
I sometimes get it to work if I have no VPN client running but as soon as I do use it the active sync stops.
Hope this may help you
James
I have exactly the same issue with my Vario II, never happened with my Vario and I have changed nothing other than my phone. Makes me think its summin to do with the harware possibly? Anyone else found a cure for this?
I Had the same problems, so I gave up on USB connection with active sync, I have 4 USB ports on my laptop and tried all, I now use bluetooth and works everytime.
There has always been problems with USB and actgive sync, so 4.2 was suppose to fix, but not for me.
I've got the same probelm on my Tytn. I've solve it to delete the Pocket Mechanic :shock: , I've done a S.R. and from now on the A.S. works correctly.
Ciao, Cesare
Had to use my old vario for a bit today, used activesync and it worked fine for the whole time I had it plugged in, got a new Vario II replacement today, got home and its exactly the same, would appear to be a mismatch between Vario II and activesync 4.2, can I connect by wifi?
Hello hmm the problem is if it uses direct or ip ,try go settings - connections - ( usb to pc ) and disable advance network funtctionality.
Hope that works
thanks
I had this problem too - I disabled advanced network capabilites in the "USB to PC" control panel under the Settings/Connections folder, and then Activsync stayed connected after that.
HTC TyTN 7/22/06 ROM
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
After the activesync working fine with my orange spv3100 for 4 weeks it suddenly refused to connect. I un-checked the "advanced functionality" box as suggested and it works again. Many thanks for the solution peeps.
I too would like to know what functions this deactivates.
Same problem, I've installed ActiveSync 4.5beta and now it stay connected, sometimes it disconnects but after restart of the phone it works again, one friend told me that the problem comes from the Activesync in the phone, so may be we have to look for the problem in the phone not in the PC
Activesync 4.2 problem
Hi all,
I too started having the same problems with Activesync 4.2 hanging my phone if left charging overnight. I decided to disable the advance network connection and that worked for a while. Now the phone wont sync AT ALL. It charges, but I can't do anything else. I reinstalled the Activesync 4.2, did a soft reset, off-on to the mobile, turn off-on my computer and still nothing. I will d/l Activesync 4.5 beta to see if that solves the problem, but it looks to be a problem with the Activesync in the mobile and not the one in the computer. I did the troubleshooting and it is detecting the USB connection but does not sync. I would really like to know if wireless sync can be achieved. Will post any fix if I find one. BTW my mobile is about a month and a half.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
pls help here im tired of this activesync problem
thank you
Sync problems with tytn
I've read through all the messages in this thread and wondered if someone could help me with some problems i've been having with syncing mine with a laptop. Often when I have the device plugged in when i boot up the laptop activesync won't start until i've disconnected the usb cable then reconnected it again-i never had this problem with the imate jam. My second problem arises when sometimes it says on the files section that there are un resolved items???? i then try to resolve the issue and a wizard comes up with add or remove buttons.afraid that i might remove something essential i tried the add button hoping this might resolve the issue-it didn't. i then gave up as nothing worked. after switching the laptop off and then syncing a day later there were no items to resolve so what exactly is happening. how can there be unresolved items one minute and nothing the next.also i hadn't done anything different on the tytn.if i select the add button on the window does it add a copy of the file highlighted and could this affect the operation of the device.Sorry if this seems a little confusing but i never had this problem with an xda exec or an imate jam.
please could someone help a non technical fifty something.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
I agree, where is this option?
I'm running version 4.2 and along the top bar all I'm seeing is:
File - View - Tools - Help
Nothing like "Settings" and/or "Connections" in sight. Under "File" there is the "Connection Settings" option, but nowhere does it mention "Advanced Networking Functionality".......
Can someone explain this please?!
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
pof said:
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
Click to expand...
Click to collapse
Every time I try that, I just get an error message saying: "Failed to disable RNDIS to use Serial".
Has anyone else seen this message? Happens regardless of whether the Vario II is connected by USB or not...
Thanks,
Chris
I'm still getting the RNDIS error, has anyone else come across this? Is there a solution?
Cheers,
Chris

Cannot sync email when phone is connected to computer through USB

I upgraded my firmware to 2.17 from 2.09 and now my phone cannot sync email while the USB is connected to my pc. Anyway to fix this?
I had this issue with the 2.09 and currently have it with 2.17. Sprint tech help was unaware of this issue (big shock). Does anyone know the answer?
EVDO While on USB
Do you loose all internet connectivity while docked? Have you checked this setting:
On the computer, open ActiveSync and navigate to: File -> Connection Settings..., make sure that "Allow wireless connection on device when connected to the desktop" is checked.
-Jason
i have the same issue, and the check to allow connections is turned on, at least in xp. I can't find the same option in vista.
I would assume that if I dropped a new ROM on my device I would need to configure a whole new ActiveSync profile. Unfortunately, from my own experience, ActiveSync is a B***H when it comes to having 2 sync profiles. I remember even uninstalling AS and trying to remove all references in Program Files and REG and it still thought I was syncing with the same device.
I would have to suggest something extreme. Installing AS on another PC and trying to sync or... reimage your PC and reinstall AS fresh.
I had the same issue, there is a thread on msn about this...
http://forums.microsoft.com/windowsmobile/ShowPost.aspx?postid=2620369&siteid=65
For me, turning on wifi on and then back off via the hard switch seems to fix the issue. Hope it helps.
try settings-connection-usb to pc- and uncheck Enable Advanced Network Functionality

Activesync working w/t Bluetooth but not with USB

Hi,
after upgrading my unbranded HTC Tytn to more recent WM5 version through official ROM upgrade from HTC (italian version QTEK_405), the activesync connection only works if I connect via Bluetooth or IR.
The USB connection doesn't seem to work anymore.
Activesync seems to try to connect, but after a while I get the "cannot establish a connection..." message.
Checking the Network Connections on the PC, it looks like there is in/out traffic packets on the device, but nothing else happens.
Also tried on another PC and same behaviour.
Activesync version is 4.5 build 5096.
Any idea also how to test that USB connector is working properly, to narrow down the problems ?
Thanks in advance
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
Also if your are running WinXP or Vista... with your phone connected with the USB cable. Check in the Device Manger, for any "unknown devices". Select them and remove.
Now disconnect your phone from your computer. Then do a "Soft" reset on your phone. Now reconnect through the USB and does it recognize it as a ppc device?? now try to ActiveSync again!!
Stuart
dgaud007 said:
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
Click to expand...
Click to collapse
Yes, no success.
I can see in the Device manager that the network card is replaced by a USB device, but nothing happens on Activesync side.
scl_electronics said:
Also if your are running WinXP or Vista... with your phone connected with the USB cable. Check in the Device Manger, for any "unknown devices". Select them and remove.
Now disconnect your phone from your computer. Then do a "Soft" reset on your phone. Now reconnect through the USB and does it recognize it as a ppc device?? now try to ActiveSync again!!
Stuart
Click to expand...
Click to collapse
Tried that.No unknown devices.
I've uninstalled the newtork card corresponding to the Tytn, disconnected and soft reset the device.
It seems to reinstall it properly, but still same behaviour.
One thing that makes me wonder is why the device shows as Windows Mobile-based device #3.
Anything I can do to celanup this ? It looks like it's got some old device hanging.
What about ActiveSync on the ppc? Do you have the "Synchronize all PC's using this connection" checkbox checked? Does it point to "USB" below the checkbox? What do you have in that MENU-CONNECTIONS... screen on the PPC?
Damn it Ive been having one problem after another with my 8525 just when I think things are going good there is another set back.
My phone wont sync to my computer anymore. I have Schaps 4.20 installed and I installed the cube earlier today just to see what it was like because I was going to upgrade to shaps 4.3. Now its time to upgrade and when I connect my phone to my pc i get a message that says "usb device not recognized"
What the heck is going on?
I uninstalled the cube from my ppc did 2 soft resets, restarted my computer and it still wont recognize my pcc
Im getting a message that says "one of the devices attached to this computer has malfunctioned, and windows does not recognize it"
It goes on to say "Try reconnecting the device. If windows still does not recognize it, replace the device."
None of this sounds good. Im stressing out!
After two hard resets I finally got it to accept Shaps 4.3 rom. It still wouldnt do it after the 1st and 2nd hard reset but for some reason, the last time I connected it via usb, it worked.
THANK GOD! I dont know what happened and why it wouldnt connect but Im happy I fixed.
Activesync 4.5 Stuck saying "Synchronizing"
The post above saying:-
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
was the solution to a major headache I was having with Activesync 4.5 on a new HTC TYTN II connecting via USB. It would sit stuck with the sync indicator turning / swirling and a message saying synchronizing, but would not be doing any synchronisation!
I disabled the "Enable Advanced Network Functionality" in START-SETTINGS-CONNECTIONS-USBtoPC it it immediately began synchronising. Thought I would enable it again and it went back to just hanging there, definately needed to be disabled to rectify the problem.
Thanks.
ianb-uk said:
The post above saying:-
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
was the solution to a major headache I was having with Activesync 4.5 on a new HTC TYTN II connecting via USB. It would sit stuck with the sync indicator turning / swirling and a message saying synchronizing, but would not be doing any synchronisation!
I disabled the "Enable Advanced Network Functionality" in START-SETTINGS-CONNECTIONS-USBtoPC it it immediately began synchronising. Thought I would enable it again and it went back to just hanging there, definately needed to be disabled to rectify the problem.
Thanks.
Click to expand...
Click to collapse
I have to disable that on both my wizard and my trinity when syncing with either my XP computer with active sync 4.5 or my Vista computer which comes with WM Device Centre. The problem is since putting an otherwise rather excellent 6.1 rom on the trinity, nothing happens at all with that option disabled. With it enabled it connects but has the problem described above. On my wizard a message pops up when it establishes a connection, nothing happens on the trinity though. It was fine before with the original ROM. I am using [WWE][20-10-08]NiAx Trinity 6.1.70 BlueAngel - OS & SYS 20748 [ONLINE] any thoughts on what could be going wrong here?

Categories

Resources