screen doesn't turn on by screen tap? - 8125, K-JAM, P4300, MDA Vario General

Hi All,
My Wizard is set to turn the screen off after a minute of inactivity.
To get it back on, I have to press the power button.
I've checked in backlight and power settings and have it set to allow a screen tap to turn the backlight on, but it's not working - well, if the backlight's off but the screen's on it works ok, but I want a tap to turn the screen and the backlight on together. At the moment I have to press the power button, which upsets Pocket Player MP3 playback...or I can press a hardware button, but again, this tends to interrupt playback of music as all the buttons are mapped to something.
Seems a simple request, am I missing anything? This is under the Mr Clean ROM, if it makes a difference.
Ric

Once the screen goes off, the phone is "sleeping". The only way I know of to turn it on at this point is to tap the power button. To do what you want would be turn turn off the screen going into sleep mode, but that will come at the expense of your battery life. Start>Settings>Power>Advanced then uncheck the Turn off device under On Battery Power.

device lock(s)
A halfway solution, you could turn the screen off using the device lock app, which includes screen off. Then when you press the power button it only effects the screen and not anything which is running. The second one is very good for listening to music with, assuming you volume control button isn't broken like mine

Related

Device turns not on when opening the Lid...

I dont know why, but my device does not turn "on" when I open or turn the lid/display? I have to press a key. Is it the same with your devices?
Yes this is the same with all universals. Gotta press the power button.
Not very smart... :?
Yeah. Some of the other buttons will take it out of standby/off, like the calender/contact button if you are on the today screen and the backlit button. I guess it's like powering on a laptop Gotta press a button.
i hope that they'll add this funktion very soon. in 99 percent of the cases you need an activated device when opening the lid.
Well, it "sort of" works. If you turn off the device with the power button, then close the lid, it won't turn on when you open the lid, you have to press the power button. Fair enough. But if you close the lid while its still on, you can see that as the lid is closing, it will turn off. Then, open it up again, it will turn back on. But only if you open it in a certain time period after closing the lid. Beyond that time period, it won't turn back on when you open the lid.
I don't know this for sure, but I think it looks at your power management settings. For instance, if you have the auto power off set to five minutes, then if you open the lid within five minutes of closing it, it will turn on. After five minutes, it won't turn on. Which is definitely a bug I would think.
when you close the jasjar without pressing the power button you are only turning off the screen
The normal standby mode (closing does not switch off and screen is activated by opening) is OK with me.
But the lid should also work like the camera button, wich turns the device on when its off. There should be no physical and logical limitations.
The normal standby mode (closing does not switch off and screen is activated by opening) is OK with me.
But the lid should also work like the camera button, wich turns the device on when its off. There should be no physical and logical limitations.
You guys are lucky.... Least your system is not getting active while u turn the lid back.. I have my device with password protect, most of the time when I try to reactivate my system by pressing PowerButton, it give Blank Password Screen, where you cant use it unless Soft Reset... Seems like its a bug in universal.

Backlight settings not effective on Jasjar

Even when I untick 'On Battery power Turn off baclight if device is not used for ... Time', my Jasjar baclight goes off in 2 minutes. And, if I set this to 5 minutes still my Jasjar backlight goes off in 2 minutes. Also, when I choose to 'turn on backlight when a button is pressed or the screen is tapped, it doesnot turn on any button or screen tap. I can turn it on by power button or Call reject red button. Any registry hacks/ Am I missing something? I would like my backlight always on untill I press power button. Also is there any hack to turn on power/ backlight automatically when I open the lid?
manu407 said:
Even when I untick 'On Battery power Turn off baclight if device is not used for ... Time', my Jasjar baclight goes off in 2 minutes. And, if I set this to 5 minutes still my Jasjar backlight goes off in 2 minutes. Also, when I choose to 'turn on backlight when a button is pressed or the screen is tapped, it doesnot turn on any button or screen tap. I can turn it on by power button or Call reject red button. Any registry hacks/ Am I missing something? I would like my backlight always on untill I press power button. Also is there any hack to turn on power/ backlight automatically when I open the lid?
Click to expand...
Click to collapse
Maybe a soft reset (fixes lots of weird problems like this). Cheers,
yeah and if soft reset doesnt help, do backup, sync with PC and do hard reset.

Power button and airplane mode

When I lockmy phone, either with slide2unlock or the actual lock button on today screen, it locks all buttons except the power button. Then I am working listening to mp3's and I accidentally hit power button, it turns off screen, not phone entirely. When it does that that kills my music, then I have to hit power real quick to turn back on, anyway to disable power button? Also even with keys locked, it still wil go in airplane mode if end buttone held down, but this only happens when using slide2unlock, got any ideas?
So to recaqp, want to disable power button.
Want airplanemode to not happen while using slide2unlock, thanks for any help
for plane mode you can use this reg key
HKEY_CURRENT_USER/ControlPanel/PhoneExtendFunction/CDMA/
set FlightModeSwitchByPnHEndKey to 0
it will prevent the phone from entering plane mode by holding the end call button
cant help with the power button, on mine sometimes it will go to sleep and keep playing, other times it will stop, i havent noticed a pattern yet
wow, thanks. been looking for this forever. it appears a soft reset is required after the reistry change, at least for me.

Turning the damn thing off!

Hi there,
This is probably a daft question, but how do I completely turn off the device? At the moment if I press the silver power button; it just turns off the backlight the way it does if you close the lid. It's not THAT much of a problem, just a huge drain on battery power.
Any ideas would be great,
Ta
You can't turn the device off completely like a regular phone. If you press the silver button once quick it will put the device into low power standby mode. The backlight AND screen should turn off. If you hold the silver button for longer only the backlight will go off which is different.
There are also a number of power saving options in the settings which will determine how long the backlight is turned off and how long the device will go into standby automatically.

Power button

Hello,
I have a strange problem with my Nexus. My power button is acting strange. Long hold brings up power menu, but:
- short press does not turn screen off
- Smart cover also does not turn screen off
- double tap to status bar does not turn screen off
- 15 seconds of timeout also does not turn screen off.
What is happening? Thank you.
So your screen will not turn off at all besides powering off the device?
PrizmaticSmoke said:
So your screen will not turn off at all besides powering off the device?
Click to expand...
Click to collapse
Thats right.
Well i don't think the power button itself is the problem since it works to power it off and on, and since the screen wont sleep by other methods either.
Did you flash a new ROM, kernel, or other mod before this happened?

Categories

Resources