usb connector broken help please - JASJAR, XDA Exec, MDA Pro General

theres no problem getting the data of the device but the problem is i've reflashed the T-mobile with qtec rom, now I want to send back for repair if she has a the wrong rom i'm stuck!!
is there anyother way via memcard / exe or other that I can wipe the rom or reload a rom without usb??
if comes down to it I can get her open and resolder but i will lose any repair cover.
any ideas please? feel very stupid.
pez

Related

Rom Install Dramas

--------------------------------------------------------------------------------
I recently had my i imate ppc repaired, as it wouldnt charge. Since then i havent been able to use the usb connection, I some how wiped out my wm 2003 rom and have been trying to reinstall it but cant seem to get any futher than the error 101 connection, I have sent the phone back to the repairer and he has said that its a sofware problem, at the moment there is no software on it, I only have the bootloader screen which says, Serial, or USB when the usb cable is connected.
Can anyone out there please let me know if there is anyway i can get the room back on this or ist it a brick

ExtUSB damaged - can flash SPL over SD? and more question...

Hello, last week i damaged the usb connector on my trinity now data pin is broke (pin in the middle of connector), connection over the usb cabel with pc is not supported now. Fortunately charging the battery is ok
Because I have on my trinity damage varranty void sticker too, can i try it send to service, or its a waste of time? keypad is not ok too, key down, right and start, sometimes not response, but I order new one from cnn.cn if the service will be unsuccessful, I replace it.
But the main question is, because I cant use USB to upgrade rom? (I need flash original WM5 rom, now I use WM6):
Can i flash over the miniSD card complet firmware? OS, extrom, radio rom? and SPL??? because now i have SPL-9.99.CP and I need SPL-1.07 from my original rom, how it flash and no brick the device over SDcard?
Or can you help me, where I can "buy" new void sticker, or if its possible, can I make it?
Sorry for my bad english
Last question: When service will be unsuccessfull, do you know, where can I buy the new ExtUSB connector? I know that its hard solder on mainboard

CID block must be corrupted

hi all i dont seem to be able to put any other roms onto my xda now i have got the htc rom on at min but i dont get any signal with a sim card in, when i try to uspl it, it doesn't go the full length, then if i try to put any other rom onto it, it comes back with the error saying the image is corrupt i am using xp so i dont know what else i can try really any help would be gratefull,
UPDATE
can some one help me with this
Checksums did NOT match!!
Could not determine a key index to decrypt it.
Your CID block must be corrupted or file isn't
from a valid CID dump!!
Aborting operation.
ok i had this problem and fixed it.
You need to install the original rom.
do you have a SD mem card?
sorry didnt read ur post properly.
Can you get into bootloader
try this. do the factory reset on this thread. it worked for me.
if you cant get it working PM me
http://forum.xda-developers.com/showthread.php?t=306904
bootloader problem
hi there thanks for ur help i cannot get (upgrade tool) the link isnt working so not sure what else to try so any help would be greatfull yeah i have a micro sd card its a 1 gig is that too big as its the smallest i have got thanks
i have just managed to install the stock o2 firmware onto the orbit but when i go to switch it on the screen fades away and goes different colours, what does it mean ????
hmm ok the screen fades away and goes into different colours.
is the screen blue/red/green stripes or does it crash into a white screen?
screen problem
i have managed to get the stock o2 rom on now and i think there could be a problem with the battery as it doesnt always switch on so i have ordered a new battery and i am hoping it will work as good as new once the new battery is in so thanks for all ur help
it could be the battery.
but in my case it was the internal clock battery that was leaking,
it could be the battery.
but in my case it was the Rechargeable Reflow Backup Capacitor that was leaking,
"it could be the battery.
but in my case it was the Rechargeable Reflow Backup Capacitor that was leaking, "
I have the same problem (new phone now but still want my p3300 to work)
is it possible to repair/change that part? could someone provide a picture or explain to me hoe to see if i got the same fault (my phone is opened)

[Q] HD2 and ActiveSync.

Hi all.
I just a got a HD2 today. And the first thing that came in my mind was "Let's go to xdaDev to get a nice custom rom". I downloaded one.
After that I put the usb and try to make it syncronize. And the problem is here : ActiveSync dont reconize the phone. I spent the last 4 hours to google why it shall not work. I tried to unstick option at "Start=>Settings=> Usb to PC" but it dont work. Nothing more after perfoming a hard reset and reinstall ActivSync.
But something is strange : When I go in the bootloader, there is the 3 color screen and the phone Display "Serial" at the bottom of the screen ; and when I start it again with USB plugged, it doesnt display "USB" instead of "Serial" it's just void and if I remove the USB "Serial" is displayed.
Plz help me to make the phone syncronize .
I use Windows XP (no firewall, no antivirus) and an official Orange Rom. My SPL is 1.42.0000. I just hope there is no hardware problem ...
Some news ...
The HD2 isnt detected on 2 other PC (Both Win XP). I managed to syncronize my old Diamond too, and it worked well. Same with a HTC Touch and a Touch Cruise, the 3 ones works.
I also tried to use Bluetooth to get an Activesync connection and this time, it noticed the HD2 but no way to get a synchronization.
Any ideas ?
Try this: goto Settings, Other (Miscellaneous settings), USB to PC, Enable faster data data synchronization. Try to tick and untick the last setting.
It doesnt work . I'm trying to follow a "GoldCard" tutorial to flash to an official HTC rom. Maybe it's Orange operator rom ... But if you have any other suggestion, let me know
I can't believe that it's such a s*** to just connect the last HTC phone to a computer. The tutorial need ActiveSync to get the SD card ID so I will not succes in this way.
Is there another software that can be used instead of ActiveSync ?
Did you flash any rom at all or are you still stock?
If you have flashed already, Have you tried to go back to the default shipped rom using sd card (not goldcard)?
Find the rom that shipped with your device, extract the RUU_Signed.nbh file from it, copy it to your fat32 formatted sd card, rename leoimg.nbh, put card in phone, boot phone with down volume held, hopefully you get the message on the three colour screen saying something like 'press volume up to start' or somesuch.
THis should not only flash the rom, but also fix spl if it has become corruptted(which appart from hardware errors is the only reason i can see that it wouldn't recognise a USB connection)
Make sure it is the correct rom for your phone, though, correct vendor and region id.
I must say if you havent flashed yet it sounds like a hardware fault with teh usb cable/connector
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Phoque_You said:
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
Click to expand...
Click to collapse
Ah in that case then i'd seriously consider taking it back /sending it back. Especially if you have tried more than one computer, sounds to me like faulty cable or USB socket.
kilrah said:
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Click to expand...
Click to collapse
You must be right. I tried everything and I never had so much pain with my others HTC to get syncronization
I had the same problem not beeing able to connect to the internet via computer. After playing with the activesync settings on the Computer -> conection settings-> ticking on and off some of the boxes->ok, it worked again.
I have connected to three of these phones ( 2 french 1 english) and no problem whatsoever, everything happens without needing to touch any of the settings...is your pc even recognising that something is being plugged in on the USB?
Have you installed the latest version of activesync?
If you have done all the obvious things and it still does not work, the phone or the cable is defective...It should connect straight out of the box with a standard, un changed version of activesync.
Send it back!

Battery charging problem

Hi guys, i have installed the motion rom but i have one problem the cable of the charge it removes and it gets back(plug and unplugged) i have tried most cable but the problem is not fixed...i have an answer if i install a stock rom with odin the problem can be solved? Sorry for my english and thanks for all help me..
If you mean that your device cant be charged by anyway try reflashing the ROM i've had this problem too and a reflash fixed it
Axell. said:
If you mean that your device cant be charged by anyway try reflashing the ROM i've had this problem too and a reflash fixed it
Click to expand...
Click to collapse
I have tryed to reflashing the rom but the problem of the charge is not fixed...now i try to install the stock rom with odin. Thanks for you answer
No i can t install the stock rom because the usb on pc won t connect i am so tired how i can fix guys? Pls thanks for help me
AnimeCS said:
No i can t install the stock rom because the usb on pc won t connect i am so tired how i can fix guys? Pls thanks for all help me
Click to expand...
Click to collapse
Seams that the USB port on the phone is sustained a damage a one of the second pair of pins is either burned out or broken & first pair is not in a very good shape either. So the only real solution in your case is to get it to the repair service & get it fixed by replacing the USB port.
By the way this is something you learn to live with Samsung phones (all do it happens & on other brand's).
Zola III said:
Seams that the USB port on the phone is sustained a damage a one of the second pair of pins is either burned out or broken & first pair is not in a very good shape either. So the only real solution in your case is to get it to the repair service & get it fixed by replacing the USB port.
By the way this is something you learn to live with Samsung phones (all do it happens & on other brand's).
Click to expand...
Click to collapse
Ah okey thanks very much for you reply. Yes i go on repair service :good:

Categories

Resources