I have just installed Pocket PC 2003 on my pocket pc. However I cannot get internet explorer or Messenger to work. I am tried to set my GPRS for (O2 -UK) and the phone appears to be connected. However, when I run messenger I get the following message:
Logon to MSN messenger service failed because the service could not be found. please make sure that you are connected to the internet.
When I try to browse the net.. I get "page cannot be found" message.
Any Ideas guys - What am I doing wrong?
Can someone confirm how to set up the O2 uk connections in Pocketpc 2003.
Thanks
Ron
With AT&T at least in the US, you need to remove the proxy server...I did that after getting the same error message & now it works!
Somebody has trouble with WM 2005, ActiveSync 4.0 (in PC) is working not stable or hanging all the time and me too- Magneto with WinXP SP2, office 2003 SP1.
In my experience some solution can be improved as following:
1. ActiveSync via IR - very sample but too slow
2. ActiveSync via Bluetooth - sample and fast
3. ActiveSync via USB, we need to do some steps
+ Turn off firewall of OS windows
+ Open network cards on your Himalaya:: Settings/ Connections/ Network cards
+ Click "Remote NDIS host" and you can see: Marked " Use specific IP addres"
+ Click " Use server-assigned IP address"
+ Click OK
+ Connect your device to PC, ActiveSync must be working at least in my case
,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb
,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb
??
@ xpirate
You can try remove activesync 4.0 and reinstall again, reset PC, turn off firewall and reconnect.
the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!
deadparrot said:
the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!
Click to expand...
Click to collapse
I noticed the same problem with AS 4 - it would only synchronise Favourites and Files.
Read the error messages carefully and you will find one telling you to use the 'Detect & repair' option on Outlook. I did so and it synced properly.
It was when I went back to Outlook Express that I realised that my OE wasnt the default email client anymore - Outlook had taken over that function. I made OE the default client again and AS stopped synchronising - went back to the same old error.
From the above I can only conclude that AS4 will only synchronise with Outlook and not any other PIM programmes. It also requires Outlook to be your default email client if you want to sync - slimy lil microsoft trick.
If you have a firewall, you will also notice that ActiveSync tries to send out email messages - this is both annoying and scary. Who are these messages intended for - Microsoft? I have blocked AS4 from sending emails on my firewall, but I still have to do a 'detect and repair' which sets Outlook as the default email client everytime I want to sync...
Problemas with the activesync
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
thanks for the help.
Txemuki
Re: Problemas with the activesync
belaten said:
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
Click to expand...
Click to collapse
I got the same problem with my Win2003Server box.
If you are running XP then you need to apply Service Pack 2
If you are running 2003 then you need to apply Service Pack 1
Seems that these packs have files "netrndis.inf" and "Usb_Rndis.ndi" that fix our problem
If you will find these files could you pls send them here? I dont' have SP1 installed and cant find these anywhere ((
I can confirm this.
On my office notebook I don't have SP2 on XP and Activesync does not work via USB (Bluetooth works).
On my home PC I have SP2 on XP and Activesync works via USB.
I guess I have to try to get these files somehow.
Patric
Update: OK, I got netrndis, but I don't have usb_rndis...
Hi Patric,
Thanx for the file!!!
Can you also post: rndismpx.sys AND usb8023x.sys ?
So, hope we will find a solution for non-SPed WinXPs and maybe for non-SPed Win2003
Thx!
OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Cheers Patric
Hi Patric,
pschoch said:
OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Click to expand...
Click to collapse
Thank you very much for the files! No need for the "usb_rndis.ndi"
It seems to be working on XP but not on my w2k3 box :-(((
Here what to do with files on XP:
1) Open "Drivers" subfolder in your ActiveSync folder (i.e., c:\program files\microsoft activesync\drivers)
2) Copy all three files there: netrndis.inf, rndismpx.sys & usb8023x.sys
3) Put your I-Mate to the cradle
4) When device installation wizard will ask you to proceed with Automatic or Manual installation you need to Choose "Manual". Then open your activesync's Drivers folder. Choose "Windows Mobile-based device" and wait until installation is finishes...
Good Luck!
hi there..
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
thanks for help
johnz said:
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
Click to expand...
Click to collapse
Have no exact idea cause didn't have such, but try to:
1) Disable ALL possible firewalls
2) Make sure your current ActiveSync Partnership is not "Microsoft Exchange" and if it is, just delete current partnership and create a new one
3) Remove "Email" from your sync list?!
4) Remove "Favorites" from your sync list?!
thx..
but..I have no firewall turned on (i had only microsoft firewall, it's off)
I have never connected to an exchange server, my partnership in activesync is only with my pc.
I have reinstalled activesync, not useful
removing items could help.. i'll give it a try
i'm going to sleep for now, thanks..
I *think* longhorn is very nice, but i'll stay with xp
I copied everything and did the procedure... now I get the error message 'Device can not start (10)'...
Not successful yet...
Patric
can instal 2005 on my xda2
hey i downloaded the win2005 and active sync 4 but when iam flashing ma rom and instaling the file an error says that cannot connect or smthn or an error in connection why is that ?
any progress
Same error Pschosch
No Progress what so ever!!
ActiveSycn 4.0 Works after all!!!
I fixed my ActiveSync USB problem...
I downloaded ActiveSync 4.0 from Microsoft's web site and instlaled over current AS4.0.
When I placed my MDA2 on the cradle, the same problem persisted, so with the PDA still in the cradle I unplugged the USB connector and then connected it again but to another port. Now the system detected a "new" device and installed properly this time so now it works 100%.
I hope this procedure helps you too!
By the way, I'm on Win XP (no SP2) and USB 1.1
Best regards,
Rayan
Does the activesync 4 can sync WM2003SE? cuz i got problem saying that version incompatible..
Windows Vista only Uses Mobile Centre.
Windows Vista does not support active sync.
Mobile Centre Only supports Windows Mobile 2003.
Thus.
Vista Does Not Support Windows Mobile 5.
Any Other ways to connect I'm not seeing?
EDIT: My bad, 2003 came before 5, so why is it telling me that it's not supported?
It supports WM5 just fine. Been running Vista since RC1 and have not had any sync problems.
i've been able to use windows vista and have it sync with my wm5 wizard...contact, calendar, etc info appear in outlook just fine after the sync...
Vista was a pain in the ar5e to get WMDC to sync with my k-jam, it is a problem with RNDIS, what you need to do is switch the connection method in Start -> Settings -> Connections USB to PC and set it to serial
then you should be able to get it to work as normal.
HTH
Steve
wurzel555 said:
Vista was a pain in the ar5e to get WMDC to sync with my k-jam, it is a problem with RNDIS, what you need to do is switch the connection method in Start -> Settings -> Connections USB to PC and set it to serial
then you should be able to get it to work as normal.
HTH
Steve
Click to expand...
Click to collapse
I can't seem to find that option in the settings. T_T
EDIT: I've never noticed it before, but my phone is also throwing up error messages about how it can't assign an IP to the netowork
ah ha so you have the same prob I had when I tried it initially, the ACU you are using is to old, you need to upgrade it to ACU 3.3 to get the functionality failing that you can install a simple CAB that will give you the functionality. I have no way of sharing the file so if you mail me your email address I can mail it to you.
Cheers
Steve
I had win 2000 and with ASync and every thing works a ok, with desktop connection on to Jas Jar via USB.
I upgraded to win xp sp2, installedt MS ASync 4.5 - since then MS Async has never worked.
Before I installed MS Async and had the jas jar connected via USB, i get the standard windows "new hardware found", I run this wizard buy I get there error, saying cant find software device may not work correctly. So I go ok, lets install MS Async 4.5.
I do this, and I connect the Jas Jar to the desktop PC via usb, yet the MS Async cant find a connection.
Yes the cables are all connected, Zone Alarm turned off, and also the XP sp2 firewall is turned off as well.
Any ideas ????
Active Sync 4.5 changes the way it connects from USB Serial Sync Mode to RNDIS Sync Mode. This can cause problems (it does for me). There is a little Microsoft program called ActiveSync Mode which allows you to change back. I you search on the web & find "ActiveSyncMode.sa.CAB" this will install the program. You then go into programs & you will see a new Icon for ActiveSync Mode. Hope this works for you.
Active sync problems
all worked fine now
thanks for the help guys
was thinking of trading in for an Iphone as they have dropped in price to 169 quid !
anyone think this would be a bad idea ?
I'l give this a go myself.
After experimenting with my exec/universal I discovered Activesync 4.5 on my XP Desktop works with the WM6 ROM but not the WM5 one.
But Vista on my Laptop will sync with Windows Mobile 5
I'll certainly check Activesync mode out then I can go back to WM5 as the Ranju core doesnt have msn otherwise everything works really well on it.
Where does th CAB file install to? I tried it on my XDAmini-s/Vario and it still doesnt sync with Activesync4.5
Hello JohnWB
It works for me too !!!!!!
Thank you very much indeed
Louis
JohnWB said:
Active Sync 4.5 changes the way it connects from USB Serial Sync Mode to RNDIS Sync Mode. This can cause problems (it does for me). There is a little Microsoft program called ActiveSync Mode which allows you to change back. I you search on the web & find "ActiveSyncMode.sa.CAB" this will install the program. You then go into programs & you will see a new Icon for ActiveSync Mode. Hope this works for you.
Click to expand...
Click to collapse
thanks a bunch, works fine after your advise, only had to install activesync 4.5 after installing activesync.mod to my mda
thanks again
Since I upgraded to 6.5 (+ associated re-installs) whenever I connect the TD2 to one of the computers the email program tries to connect to my email account to download messages.
I have the account configured to Manual download and email sync. is off.
Anyone else seeing this ?
I had the same problem, when i updated to WM 6.5. I did it with Active Sync from a PC with WinXP, but it just didn't work. I then deleted all the sync settings and made the configuration from another PC with Win7 and Windows Mobile Device Center, and then it worked perfect.
Thanks,
However I originally installed from Win7 then XP.
What do you mean "deleted all the sync settings and made the configuration from another PC" ?
No one else seen this ?