Related
I know the xda II is not capable of this out of the box... Are there any third party apps that would allow me to do this??
The problem is that the XDA II uses the limited Microsoft Bluetooth stack that came with Windows Mobile 2003 instead of the full-featured Widcomm Bluetooth stack used in iPAQs. The Microsoft Bluetooth stack doesn't support the File Transfer profile nor the Network Access profile. Someone has taken the Widcomm stack from the iPAQ and adapted it for the XDA II. Just search this forum for "BluetoothGPS.zip" and you'll see lots of discussions concerning this. But note that this is a hack.
Hi Jargon, Thanks for the reply.. Would it do my xda II any harm if I download it? or would it mess it up? .. If I download the bluetoth gps thru what software can I tranfser files via bluetooth? Thanks
sleekool said:
Hi Jargon, Thanks for the reply.. Would it do my xda II any harm if I download it? or would it mess it up? .. If I download the bluetoth gps thru what software can I tranfser files via bluetooth? Thanks
Click to expand...
Click to collapse
I haven't used the hack myself (I didn't want to void my warranty). So I can't speak from experience. But you can find the info you need by searching the forum for "BluetoothGPS.zip".
Nah, If it voids the warranty... Jargon, Thanks for the reply again, would you happen to know how to remove application icon/shortcut on the program menu that has already been removed from the system? another thing, I also accidentally auto-configured the phone to the 1010 settings, how can I remove the settings and the app icon/shortcut on the program menu? thanks
sleekool said:
Nah, If it voids the warranty... Jargon, Thanks for the reply again, would you happen to know how to remove application icon/shortcut on the program menu that has already been removed from the system?
Click to expand...
Click to collapse
Yeah, just launch File Explorer and go to the "WINDOWS\Start Menu" folder. Look for the unwanted shortcut in that folder and in all its subfolders. Then delete the unwanted shortcut and you're done.
sleekool said:
another thing, I also accidentally auto-configured the phone to the 1010 settings, how can I remove the settings and the app icon/shortcut on the program menu? thanks
Click to expand...
Click to collapse
You're not alone. I once made the same mistake. To fix it, I used PHM Registry Editor to search and delete the "1010" settings in the Pocket PC registry. Then I manually reconfigured all the connection settings (Settings->Connections->Connections->Advanced and MMS Composer options). After that, I removed the AutoConfig icon from the Start->Programs list to make sure I don't make the same mistake again.
I hope this helps.
you bet it helps.. I did it !! I removed the application icons at last. Thanks Jargon. :lol:
http://bluetooth.i-networx.de/index_e.html
the bluetooth tool in here, use for xda2
Is this a software? or something that might void my warranty?
it says on the update improvements that it still cant send files thru bluetooth until the future versions.. can it?
sleekool said:
Is this a software? or something that might void my warranty?
it says on the update improvements that it still cant send files thru bluetooth until the future versions.. can it?
Click to expand...
Click to collapse
You can send file using bluetooth, just launch File Explorer (don't use Resco Explorer, it doesn't work with Bluetooth file transfer), tap and hold the file you wish to beam, then select Beam File... from the popup menu, just wait for your available bluetooth devices to be listed, then just tap to send the file...
I'm glad to be wrong on this one. I've just successfully transferred a file from my desktop PC to my XDA II via Bluetooth (Microsoft stack). However, I still can't figure a way to transfer a file from my XDA II to my desktop PC. My XDA II can detect my desktop PC but the file transfer always fails.
horsy said:
http://bluetooth.i-networx.de/index_e.html
the bluetooth tool in here, use for xda2
Click to expand...
Click to collapse
I have NEVER been able to log on tyo that link, I have tried lots of times, any solution?
cruisin-thru said:
horsy said:
http://bluetooth.i-networx.de/index_e.html
the bluetooth tool in here, use for xda2
Click to expand...
Click to collapse
I have NEVER been able to log on tyo that link, I have tried lots of times, any solution?
Click to expand...
Click to collapse
try this link http://www.angeltowns.com/town/bluetooth/
I managed to get that file, however I am no nearer getting my pc and xda2 to sync, or send/receive files. I noticed that once the patch was loaded that "bluetooth" option in activesync vanished. My pc can see my xda, however it cannot browse the files or vice versa. Simple tasks should not be this difficult, I have spent a whole day on this, I even used the latest and greatest widcomm software to no avail.
As an addition to the above, I thought I would try to see if I could have better results using an ipaq 3870, within 10 minutes I had Obex file transfer and activesync through bluetooth working. All I managed on the xda2 was to send files to the desktop using right click/beam command. The ipaq software is far better and does almost all the work for the user.
Finnish Aali Alikoski, Academic Developer Evangelist of Microsoft Finland, has just released a highly useful application, SMS Notifier, along with its source code.
The application offers some really nice and, up to now, to my knowledge, on the Pocket PC Phone Edition platform, unprecedenced functionality: it waits for unanswered incoming calls and, depending on the configuration settings, it either sends an SMS message to the caller (with configurable contents), possibly containing also the end time of current appointment (this is also configurable) or adds an item to the system-level Windows Mobile calendar (containing the caller info).
The latter functionality is nothing new – you can check the caller's identity and the call date/time in any low-end mobile phone. The former – that is, the SMS feedback –, however, is really long-awaited!
Downloading and Installation
You can download the application here. Transfer the CAB file to your PDA and execute it there.
If, after installing and upon starting SMS Notifier, you're presented this error message, make sure you download and install .NET CF 2.0 from Microsoft. Make sure you install it in the main memory. Also note that, as the application heavily relies on the new, connectivity/database-related libraries of .NET CF2, it's not very easy to port it to run under the earlier Compact Framework library. (For CAB lovers, you will only need c:\Program Files\ Microsoft.NET\SDK\CompactFramework\ v2.0\WindowsCE\wce500\armv4i\NETCFv2.wm.armv4i.cab ; you can also download it from here (to avoid having to download the 24 Mbyte-long MSI installer).
Configuration
On the main set-up screen, there're some checkboxes in AND relationship. The first one, Send SMS to unanswered callers, instructs the application to send an SMS to everybody that tries to call you but his or her calls remain unanswered. Using (not disabling) the second two checkboxes, however, you may make the application not send a SMS to anyone that calls you, just to the ones that call you during an active/busy appointment.
The checkbox/text input area at the bottom makes it possible to report the end of the current appointment so that he or she can know when you are reachable again.
The Calendar tab contains only one checbox, which instructs the application to enter all the incoming calls into Calendar.
Note that the configuration settings are not correctly saved/restored, as the author also points out.
Usage
To use the application, just start and configure it to your liking. Do not click the Quit button – then, it won't send your callers any SMS. Just let it run. You can, of course, suspend the PDA while you do so and also minimize the application. This also means you can safely start it from \Windows\Startup (just like the other highly recommended application, PMRecorder – please see this article on it if interested) – if it's running in the background, it'll safely catch all unanswered calls.
Other stuff
I also recommend the author's blog here. Don't be taken aback of some of the material's being in Finnish: there's nothing really interesting in them for non-Finns (the Finnish blog posts are only about local, Finnish meetings, conferences). Unfortunately, some of the other Finnish .NET bloggers (see the links in the lower left of the page) post exclusively in Finnish, even highly technical stuff that would be interesting for non-Finnish speakers too. (Feel free to ask me in my blog for a public translation for some of them if really interested.)
thanx man .. jus tried it . this application actually works .rockinnn
I can't seem to be able to install the .net Framework 2.o on my new T-Mobile MDA - USA (Wizard)
I get the same error from .cab install or activesynch install:
"Installation error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info:4"
Any suggestions?
oops
PhoneGuy said:
I can't seem to be able to install the .net Framework 2.o on my new T-Mobile MDA - USA (Wizard)
I get the same error from .cab install or activesynch install:
"Installation error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info:4"
Any suggestions?
Click to expand...
Click to collapse
Did you try to install it in the main storage or the storage card? Only install it in the main storage.
Yeah, the options were "Device" or "Storage Card".
I tried Devicce but no luck...
PhoneGuy said:
Yeah, the options were "Device" or "Storage Card".
I tried Devicce but no luck...
Click to expand...
Click to collapse
I've encountered the same when I first tried to install it on a storage card. Then, subsequent installs to the main memory didn't succeed either. A hard reset helped.
I have installed it and it seems to work well. My only concern is that it seems to use the notification application of the phone rather than the call list of the phone. The reason I say this is because it puts a calendar entry in when I miss a call then adds another entry when I check the notification of missed calls.
is this what is supposed to happen? would it send 2 text messages in this case (when the call comes in and when I check the notification that the call did come in)?
thanks,
Edwin
also, it seems if I am on the phone when I miss a call it uses the name of the person I was on the phone with and not the person I missed.
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
ethorn said:
is this what is supposed to happen? would it send 2 text messages in this case (when the call comes in and when I check the notification that the call did come in)?
Click to expand...
Click to collapse
That's what happens for me... I stopped using it because of the duplicated sms's...
meschle said:
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
Click to expand...
Click to collapse
Tried it. Keep getting "Cound not find resource assembly" error.
Strange works sweet for me.
this is the link I used
http://www.freewareppc.com/communication/callassistant.shtml
meschle said:
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
Click to expand...
Click to collapse
after using the Ruttensoft on my Qtek, i can no longer creat SMS, when I click on new, only a while screen appear, cannot input both phone number and Text.... did anyone meet the same ???
meschle said:
Strange works sweet for me.
this is the link I used
http://www.freewareppc.com/communication/callassistant.shtml
Click to expand...
Click to collapse
No it didn't... you didn't use this program. we are trying to give feedback to the author of this program which has so much more potential than the limited software you used.
No sms works for me even when activated. my qtek rom is 1.6.7.1 maybe that's the diff. Sorry ethorn could start a new thread if you like but may help some people if the other prog don't work for them.
Hi
I have a XDA 2i & a XDA Mini S and use a program called Do Not Disturb by Jguisoft, a very small footprint and easily configurable
no I am all for putting ideas of other products, but the way you worded it sounded like this program that Menneisyys worked on worked on your phone and that the version of his program you used was at another link.... my problem is that neither are true. Software Guru did things right and just introduced another alternative.
thanks guys
Software Guru said:
Hi
I have a XDA 2i & a XDA Mini S and use a program called Do Not Disturb by Jguisoft, a very small footprint and easily configurable
Click to expand...
Click to collapse
Can you provide a link? Did a google and no results found.
Cannot download the SMSNotifierSetup cab
Can someone please post this as i cannot seem to download it.
thanks
does any one out there know of any app that can be used to browse files on a bluetooth device? i have got my other phone and would like to browse its contents via bluetooth, im sure i was able to do this on WM2003 but the BT manager in WM5 doesent have an explore option.
also ive found this while looking, it sends some kinda msg annoymously, guessin it changes user id or somethin as it sends.
http://www.smartphone.si/sniper/
used it a couple of times seems to work but u cant borwse files. still sending annoyomous msgs to peeps on the bus is quite ammusing! :lol:
There's alot missing in the bluetooth functionality of WM5 compared to 2003. I hate when Microsoft cut corners
yeah i no wat u mean. surley theres a proggie out there that can replicate the WM2003 BT manager? it was really handy browsin the files on my phone. i'll keep digging and post bk soon.
I looked for ages and found nothing. I'm pressuring my pal to write an app but he's really lazy.
I'm been working on this for a little bit now since I found all the existing apps don't work well in WM6 or don't work well in a custom rom. This is a open source program (as all of mine are) and I welcome help/donations/and comments. Bug reports will be helpful in this first release as I certainly consider this a alpha release at the moment.
What it does:
once setup at every boot it compares your IMSI number with the one stored, if it's a match it plays a little sound and that's it. If it's not a match, it locks the device and displays your email and a request to please get it back to you. It also send you the "new sim's" imsi and phone number via a SMS.
------------------------------
SecurIt 1.1 (BETA) by Shadowmite
------------------------------
TODO: Build in SMS rule filtering thus adding remote control
Lock out activesync connections?
Protect the datafile from being deleted, or keep a backup in registry.
NOTE: THIS DOES NOT WORK WITH CDMA PHONES!
Version 1 (BETA) Instructions:
This security applicatioon can run loaded normally via a cab file to your device, or via being cooked into a rom. It will require your phone able to run unsigned code (most roms at this site are fine in this regard). Furthermore it does require the .NET Framework so it's really for WM6 devices, WM5 will be more tricky and is left up to the user to figure out how to make it all work.
When first run the program resides in \windows and must run from there. If you ran the cab installer it will have created a shortcut for you into the Programs folder.
The application comes up with a form showing you the current device imei, imsi, and phone number. You need to enter a password (needed to disable security programmatically or change SIM info), a email you can be reached at my a "finder" of your phone, and a SMS phone number you'd like alert messages sent to. Once done click set. Finally, click Enable security.
The application then sets itself up to autorun upon boot and if the SIM matches, it plays a little sound file to let you know everything is fine. If the sim is found to have changed, it will lock down the device until a password is entered. Meanwhile it shows your contact email and has sent the alert sms to you with the new imsi and phone number.
If you enter the proper password the program will take you to the settings screen where you can reenter the password and make changes to the settings and resave them. Simply clicking enable security without making changes will keep the settings as they are.
Clicking disable security will remove the autorun entries and remove the data file the programs keeps at \windows\SecurIt.dat.
The data file keeps 5 lines, MD5 hashes of your imei, imsi, password, and also your email and sms phone number as plain text. Thus stealing this file does not enable retrieving the password or easy changing of the imsi. Deleting this file however would remove security. Furthermore activesync will still link to a locked device. Knowledgable people about these devices could therefore defeat this security, however it's goal is to keep the casual theif / finder out of the phone.
This program is a work in progress and I welcome help with modifications to it as well as bug fixes. Source can be found at:
svn://www.shadowmite.com/shadowmite/SecurIt
To cook this into a rom, you need 3 files. 2 of them need to be generated when you first install it like normal and set it up. Copy the SecurIt.dat from \windows and the SecurIt.lnk from \windows\start up to your rom as well as the SecurIt.exe file. It's that simple. Enjoy!
History:
1.1: Fixed all kinds of bugs causing security to crash with various sims
1.0: Initial release
If you like my work and would like to help insure I continue to have time for this, please consider a donation to: foglemATshadowmiteDOTcom
Shadowmite, thnx for starting an "opensource" project for this. I havent tried it yet, will try once I reach home.. But I had a cpl of suggestions\questions:
1. Why do u keep email and sms phone no in plain text instead of encrypting them as well?
2. Instead of storing config in a file, store the config in registry which lessens the chances of someone finding out about the prog and deleting the file to disable security.
nice work as usual...
shantzg001 said:
Shadowmite, thnx for starting an "opensource" project for this. I havent tried it yet, will try once I reach home.. But I had a cpl of suggestions\questions:
1. Why do u keep email and sms phone no in plain text instead of encrypting them as well?
2. Instead of storing config in a file, store the config in registry which lessens the chances of someone finding out about the prog and deleting the file to disable security.
Click to expand...
Click to collapse
number 2 is in the TODO list...
#1) we could encrypt them as long as it's not a one-way hash like the first 3 lines, however those are the bits of data we don't mind the theif/finder seeing afterall as they are the means to get the phone back to its rightful owner. I suppose we could hide them but the phone number will be on his next bill for sending it a SMS and the email is displayed on the locked screen.
And as walshy said, #2 is certainly on the todo, but locking our activesync connections is a bigger concern and I believe completely doable.
#1) we could encrypt them as long as it's not a one-way hash like the first 3 lines, however those are the bits of data we don't mind the theif/finder seeing afterall as they are the means to get the phone back to its rightful owner. I suppose we could hide them but the phone number will be on his next bill for sending it a SMS and the email is displayed on the locked screen.
And as walshy said, #2 is certainly on the todo, but locking our activesync connections is a bigger concern and I believe completely doable.
Click to expand...
Click to collapse
ok, and sorry abt the #2, I missed the TODO part..
Keep up the good work..I myself was thinking abt making smthing similar but now I think I'll drop my idea to make a different one, as this seems to be a better idea (opensource is always better )..
I hope I can make some contribution to the code if possible..
shantzg001 said:
ok, and sorry abt the #2, I missed the TODO part..
Keep up the good work..I myself was thinking abt making smthing similar but now I think I'll drop my idea to make a different one, as this seems to be a better idea (opensource is always better )..
I hope I can make some contribution to the code if possible..
Click to expand...
Click to collapse
What advantages does this give over "Mobile Justice"..another similar util...my rom has Mobile Justice cooked with it which makes it hard to remove.
famewolf said:
What advantages does this give over "Mobile Justice"..another similar util...my rom has Mobile Justice cooked with it which makes it hard to remove.
Click to expand...
Click to collapse
If you like that software and have it working properly use it. Maybe you'd like to post in every rom thread asking why not use some other rom while you're at it?
Shadowmite said:
If you like that software and have it working properly use it. Maybe you'd like to post in every rom thread asking why not use some other rom while you're at it?
Click to expand...
Click to collapse
I'm not using Mobile Justice which is WHY I asked what advantages YOURS had over theres for COMPARISON. If it had additional features I was going to recommend it for addition into XM6R3 (the next release of the current rom), but with an attitude like yours I won't bother with further review.
famewolf said:
I'm not using Mobile Justice which is WHY I asked what advantages YOURS had over theres for COMPARISON. If it had additional features I was going to recommend it for addition into XM6R3 (the next release of the current rom), but with an attitude like yours I won't bother with further review.
Click to expand...
Click to collapse
you dont bother with a review but bother with a slagging ... take your "fame" somewhere else...
Ok, for starters mine isn't based on assuming every device has a GPS built in (while technically being a Trinity owner I should go that route). I instead base mine on nicely locking down the interface so far with a polite message to get the device back to the owner. Furthermore mine is trivial to build into a cooked rom which was my main reason to write it. I tried every security app out there over the last weekend without any of them working "properly" and figured the best way to get one is to write one. In addition mine is open source, mobilejustice is not.
Now then, you said you're not using it... But the last post said you had it cooked in? WTF? Need some help deciding what you use and don't use?
my rom has Mobile Justice cooked with it which makes it hard to remove.
Click to expand...
Click to collapse
I'm not using Mobile Justice which is WHY I asked what advantages YOURS had over theres for COMPARISON.
Click to expand...
Click to collapse
Shadowmite said:
Now then, you said you're not using it... But the last post said you had it cooked in? WTF? Need some help deciding what you use and don't use?
Click to expand...
Click to collapse
1) The rom I currently have installed comes with Mobile Justice preinstalled.
2) I have not configured and am not currently using Mobile Justice
3) The author is currently taking suggestions for software to include in the next revision of their rom.
What part of any of those statements are you having difficulty comprehending?
Perhaps you and the gentleman from Melbourne should both grow up and quit reading an insult where one was not intended.
Well than back on track... Give it a try and see what you think. I really want feedback from folks outside the USA as I believe it will not properly catch your phone number of the "thief's sim" however if the sms works it should still get the phone number to you obviously.
The GPS coord. request feature is a nice one and will have to go on the todo list.
well, well, fights apart, what drew me to this app over the other apps was the opensource nature as mentioned by Shadowmite because I, like shadowmite, was not happy with the other apps doing things properly or just because I wanted somethings to be done differently..
@shadowmite:
1. I have a few ideas of getting "coordinates" and sending to the original owner even on non-GPS devices ..Maybe we can discuss some things later on once the basic structure of the app is ok.
2. Couldn't find the source code of the app on ur site..(May be am just one dim-witted dim-sighted git ) Please point me to it..
You'll need svn to get it, windows users: http://superb-west.dl.sourceforge.n...vn/TortoiseSVN-1.4.4.9706-win32-svn-1.4.4.msi
svn://www.shadowmite.com/shadowmite is my master repository for all projects.
cool, I do have TortoiseSVN installed at home..Will check it when I go back..
Will it sustain a hard re-set ? Dont think so.
@shailesh, for sustaining hard resets, it has to be cooked into the rom, pointed out by shadow on post 1..
I don't know if something else can be done for this (writing into ext rom is one option but that is not possible for most devices now)
Sounds like a great piece of software. And open source is a great idea too.
I did tried several others like this one (Eye on the thef, Ultimately Theft Alert ...) some features were still missing :
First an autoconfig method :
As already said, whatever your storage methode is (file or registry), you 'll everytime lose the configuration when a hard-reset is done on the device. The only one possibility i can imagine is to store your "installer" program on extended rom with the ability to add an external config (encrypted) file as a parameter.
Installation will be handled by the autoconfig process, using this external file. Config will probably needs to be stored on extended rom too. It's not peace of cake to create an extended rom, but easier that cook a rom.
This feature won't be very helpfull if there is no way to generate a config file automaticaly base on settings done by user : kind of export process.
On standart start/soft-reset, your program will run as it does actually, but when a hard-reset, is proceed, programm will reinstall unattented and will still be running after boot... No way to easily remove it. Bad effect is that it will also be difficult to update programm/config.
Secondly, i'd like to have the a way to "format"(or encrypt) a memory card remotely.
Do you thinks those could be part of your TODO list ?
Will try it on few next days and i'm ready to help you translating it in french
hi shantzg001,
thanks for replying,
My mistake, did not read the whole text.
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
Do not launch two or more instances of the program at the same time, could really mess things up. -- se the forum (thanks tucahara)
To stop the program, u must use a process manager.
it would be good if someone could make a cab to install it. -- done see the forum (thanks tucahara)
this is still a beta, I intend to make ajustments as people give feedback.
Thanks,
hope u like.
-----first update---
now, an file called "audioswitch_error.txt" in the root directory will hold the error messages.
------------ List - Working ------------
wizard - I tested
P3301 or P3300 - I tested
att tilt - I tested
touch 3452 and 3450
touch dual
touch cruise
touch HD
Sony Ericsson Xperia X1
BenQ E72
Titan --> see the forum
------------ List - NOT working ------------
T-Mobile Diamond
HTC Touch by Sprint
Samsung SGH-i780
------------------------------------------------------------------------------------
check the new thread at:
http://forum.xda-developers.com/showthread.php?t=502361
new aproach to do the switch and now open source, even with an class that others can improve and put in other apps...
Some people complain about me not openning the source of the app, I have just made this way because there was proprietary code inside and I had no time to rewrite it without the proprietary code.
I have made the best I could, and now I had some time and rewrite the app in open source, to those who only complain about it, get the code and make it better instead of complaining!
Thanks for all that encourage me to continue the work and helped the development.
will retire this project for while...
thanks u all.
Audioswitch for Skype
On HTC Touch by Sprint (CDMA, also known as Vogue), audioswitch does switch the audio in the Skype 2.5 windows mobile PPC from external speaker to handset. Unfortunately, the microphone is then also disabled. I hope you'll be able to tweak your audioswitch to resolve this.
Thank you so much for developing this wonderful applet. I'm sure you will have the gratitude of many frustrated Skype windows mobile users.
What really happens is that when the sound output is switched in some phones, the microphone gain changes too. This happens because the phone thinks it is a "normal call".
Most of the times the mic gain increases, but in your phone it must be decreasing. Try to figure out in registry where the mic gain controls are recorded and chage all of then to the same value. I had this issue with my P3301 and solved this way, but there is quite a time now and I do not remenber where are the reg keys to change, but I have found the information here in the forum.
I will try to figure out for other "hack" to solve this issue... thanks for reply.
doesn't work at T-Mobile Compact IV (aka Diamond)
Sound went to loudspeaker....
PS: fring last version working fine with sound at mine phone (without any additional programms). Sound is going to correct destination automatically
I just tried the latest version of Fring, which automatically switches audio to earpiece when call is connected.
The same issue occurs with the new Fring as I described above with your audioswitch program: I can hear audio through earpiece, but microphone doesn't work (or is inaudible).
I couldn't find a tweak or registry hack to correct this. Any help would be greatly appreciated.
MarceloFB said:
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
it would be good if someone could make a cab to install it.
this is still a beta, I intend to make ajustments as people give feedback.
If someone like this program and wants to make an donation...
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=4WLQVA6LTKWSL&lc=GB&item_name=marcelofb&item_number=marcelofbxdadonations¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG_global%2egif%3aNonHosted
Thanks,
hope u like.
Click to expand...
Click to collapse
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
OOOH
If this program works on the new BenQ E72 I'm getting in a couple of days I'll certainly donate!
THANKYOUTHANKYOUTHANKYOU
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
baal_zebub said:
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
Click to expand...
Click to collapse
hehhehe, I made troca2, I will see if the switch code is the same or if I have made some mistake...
are u sure you have put the program in the correct directory?? I will make some modifications to have an error feedback. So u can see if something is wrong...
JKingDev said:
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
Click to expand...
Click to collapse
It is a good idea to use hook, I have not think of it!
I use a proprietary code included in a lib at the company I work for to make the "switch" but it is not different of what u find here in the forum.
Maybe we can make an effort to re-make it with hooks...
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
so to sum up the way i have it now (most files included) on my xperia x1:
1) installed skype
2) installed mortscript
3) add skypesoundswitch to \windows\....
3) add skype.mscr to \.... (root)
4) overwrite skype.lnk with the new skype.lnk in \windows\start menu\programs\..
in the way whenever i open skype(.lnk), it opens skype.mscr, this opens skypesoundswitch.exe and than skype.exe... when you close skype.exe it closes skypesoundswitch.exe...
it seems to work perfect.. but hey maybe i am doing something totally wrong here.. than just shout!
by the way, the .mscr and the .lnk files are offcourse edit-able .. so you can put the files everywhere you like..
madhijs said:
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
Click to expand...
Click to collapse
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you will have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch. Or please show me where to find details on how to code this myself. Thanks!
Hat off to both of you and really glad that we will have a much improved solution.
JKingDev said:
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch.
Click to expand...
Click to collapse
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
madhijs said:
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
Click to expand...
Click to collapse
Yes it must be run at startup but placing a link in your startup folder will make everything transparent to the user. I don't think there will be an effect at startup. In it's current form it must check every second (or whatever you set the timeout to), but its only a little bit of code. I am not really sure if that will really have an effect. The more often it checks the faster it will switch when you open skype, but also the more processor use. Check less often and it uses less processor, but there might be a delay in switching the audio. I proposed doing it by hooks though because this would use even less processor. The app will only check when a new window takes focus, rather than just periodically checking. This way it only checks when it needs to and will always switch instantly.
I am glad u liked the program.
I will try to answer most of the questions...
1- JKingDev:
I have though in your idea of using hooks, but if I use a hook, the program will have a loop anyway to check for the messages(hidden loop ;-) ), and it would have to have an "fake window" or something to process the messages. This way we have only one loop, in a very simple command line program with high optimization, so we have to think what is really the best way of doing it... I will pm u as soon I have any time to "program" again. hehe
2- people that uses mortscript with the old "troca2"
I will try to make a way to make this program work the same way as troca2, maybe with an "argc argv", wait the next update.
3- the battery life??
if u notice any battery life decreasing with the usage of the program, configure a bigger delay, maybe 5000ms, it is a matter of adjust the "timming" for each processor. Post your results here so others can find the optimum value for the delay in their phones.
4- have to start the program every reset?
yes, just put it in the startup folder.
maybe someone can make an cab that put the program in the right place and a link in the startup, it would be cool! I dont have an easy program to deal with cabs, and the vs projects for cabs.... I really cant make that thing work!!
well it is only the batterylife i was worried about. but i'll try running the phone this weekend with the program running and doing some skype.. lets see how it turns out!
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
weekendli said:
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
Click to expand...
Click to collapse
will check this, but people reported that worked in xperia... and it is running in my P3301... anyway, will check and post an wm6 build if it is the case... check the error file and see if it tells anything.
Other thing, this program uses low level api`s, so your windows MUST be fully unlocked for it to work in wm6.