Screen Rotation Problem - 8125, K-JAM, P4300, MDA Vario General

Hi. When I open the keyboard, the screen orients itself to the landscape mode. When I close the keyboard, the screen resumes portrait mode, but on the right hand side, part of the screen is covered by the background. It is the same width as the scroll bar. I can't get rid of it until I reset the device. Any thoughts as to the problem and the fix? Thanks.

umm i had that issue before, do you have a lot of programs open? sounds strange, but when ever i have a lot of stuff running, my device cant handle it, so it kind of gets frozen onto the screen until i reset...
does this problem occur ALL the time, or when u run a certain problem?

Actually, it only happens on the Today screen. If I have any program running in landscape and return to portrait before exiting to the Today screen, no problems. Just when I go to landscape in the Today screen. Very odd.

what todayscreen plugins are you running?

I think only two: Tonaya Weather to Go and cLauncher. Pbar is also running, but I don't think it is a Today Plug-in.

Curious D said:
I think only two: Tonaya Weather to Go and cLauncher. Pbar is also running, but I don't think it is a Today Plug-in.
Click to expand...
Click to collapse
I had the same problem too with cLauncher but it is no longer there after I installed SPBMobile Shell which enable me to put cLauncher into one of its tabs buttons...
Why don't you try disabling cLauncher from your today..

I tried disabling each program alone. I had to place other today features (all standard with WM5) to create a list long enough to cause the scroll bar on landscape mode. When I return to the portrait mode, the space was still on the right side as before. Curiously, I put back the plugins, and the space was gone. Must have been refreshed.

Hi Curious,
To refresh the Today screen after the vertical scroll bar has disappeared try...
1) Select the Comms button to display comms options
2) Slip out the keyboard so that the comms buttons re-orientate
3) Slip the keyboard back in then exit the comms screen to return to the Today screen
Is the Today screen intact now?

Thanks. That worked. Now I'm just wondering why it's doing that in the first place. At least I don't have to reset to get back part of my screen. Thanks again.

Nice one! Well done. Not sure why it happens but I have the same issue but I don't mind it that much. I was guessing that it was the SPB Plus Today Plugin but I'm not sure.
Do you also use the SPB Plus Today Plugin?

No. Is that like cLauncher?

Hi Curious,
The SPB Plus Today Plug-in allows you to place shortcuts on the Today screen and group them under tabs which is nice but if you don't have it installed then that blows my theory
The only other thing I can think is that it is possible to alter the vertical scroll bar width by editing registry, the key is:
HKLM\System\GWE\cxVScr
The Default is (Decimal) 13 but you may be able to make this smaller so that it minimises the problem.
If you do find the cause then let me know

Thanks, but I think I'll stick with your previous idea. I'd rather not tinker with the registry if I don't have to since I'm not great at understanding registry changes.
cLauncher does what SPB plugin does. It's free and it allows different sizes for the icons. It really helps me with one handed function. It may be part of the problem if SPB does the same thing with the screen orientation.
Thanks again for your help.

Related

Rotate Jasjar to Left Hand Landscape mode?

Although I tend to use my Jasjar mostly in its native landscape mode, Some programs are still written to operate only in portrait mode. So we have to switch between to two orientations. Yes, the little icon on the bottom right of the today screen will rotate the screen - from Landscape to Portrait (PDA) mode, then from Portrait to INVERTED Landscape mode, then another click to get it back the right way up. I know it is just one more click but it tends to irritate me and I am looking for a way to just switch it to and from the two modes I want.
I can map one of the buttons to the standard <Rotate Screen> option in Settings->Buttons, but that rotates only between Portrait and INVERTED Landscape modes! It will not bring the screen back the right way up.
Maybe there is a registry modification to fix that?
Or, can someone please tell me if there is some software or other way to make the screen switching work the way one would expect on the Universal?
I know SPB Pocket Plus can do it with its <Rotate Landscape Left> option but I don't need PocketPlus for anything else so it seems wasteful to have it installed just to rotate the screen.
I expected this to be a rather common problem but searching through this Universal forum, I could not find an answer or even any discussion on this issue. Am I the only one who thnks this way?
Check out phm keys. I posted a link to it on my website today.
V
Thanks V, but I can't see any link on your Web Page. Never mind, I searched and found the PHM.lu site and downloaded the msi file from there. But I am not sure if it supports WM5? When I run the msi on the desktop it goes through the motions but nothing appears on the Jasjar. Usually it tells me something is being installed and asks whether it is to go to the SD card or main memory. But nothing happens! Tried it twice. Maybe PHM Keys is not supported on WM5?

Smartskey scroll today screen?

I know Smartskey has a configuration setting for to change volume on today screen, and until now I had been using it that way. Thought if I changed that setting to disable volume on today screen that I might be able to use my slider to scroll the today screen (which has lately grown longer than one screen), but alas it does not for me. Does this work for anyone else? Any ideas how to make this happen, or is it even possible? Thanks!
Bump...any thoughts? Water, its been awhile since Smartskey has been updated, any chance you would add this to your next release?
If you use PocketBreeze from shsb,net then you can place all of your today plug-in into tabs and the d-pad will navigate the tabs.
Thanks I'll give it a shot.

Question - How to stop rotation bug?

Hi guys
Does anyone know if there is a fix for this bug as mentioned on the Gyrator website help page? In fact, does anyone get this bug or just a special few??
Q. When I rotate to any new orientation, the phone application pops up, or the today/manila screen appears?
A. As you'll probably know, orientation is disabled by default on the Diamond, because the HTC developers are either too incompetent, or lazy, to build applications which are orientation aware. As such, strange things happen with either Gyrator rotates the screen, or you use any other application to do the same thing.
ed.dark said:
Hi guys
Does anyone know if there is a fix for this bug as mentioned on the Gyrator website help page? In fact, does anyone get this bug or just a special few??
Q. When I rotate to any new orientation, the phone application pops up, or the today/manila screen appears?
A. As you'll probably know, orientation is disabled by default on the Diamond, because the HTC developers are either too incompetent, or lazy, to build applications which are orientation aware. As such, strange things happen with either Gyrator rotates the screen, or you use any other application to do the same thing.
Click to expand...
Click to collapse
Yes, it is a PITA. I'm using a file called "rotator-netxscale-2003-4k-v420". It brings up a box on top of other apps to change the screen around. I have it programmed to the down volume button with AEBplus. The trick is never to switch the screen orientation while in TouchFlo3D. If you start your app first then activate the above program to change the screen it is all good, if you go to the TouchFlo 3D interface...it is not a happy camper. Unlike the normal WM Today Screen, TouchFlo3D Home is allergic to landscape.
I use Gyrator2, and TouchFLO is disabled by default in the settings, preventing it from being re-oriented if the device is turned. If you do a little searching, you'll find more threads that can help you configure Gyrator2 to stop the phone app, including incoming calls, from re-orienting. Plus, you can add any app you want in the settings. One I added was the Bubble Breaker game, which would restart a new game automatically if you turned the phone...
The same thing can also be done with MobileMagic.
Just deny auto rotation to the the apps that do not like
to be rotated or that rotate them self, like Teeter.
Thanks for the info chaps but i think that there is a bug in the system which SOMETIMES pops up the phone or manilla when i rotate an app (opera or tomtom mainly) from portrait to landscape using any method (gyrator, gsen or handymenu). It seems that these apps (phone, manilla) dont like any change of orientation even when they are in the background and opera or tomtom is rotated.
I have changed the gyrator2 .ini file to make no apps rotate except the ones i want to. Not even that works........
Any more help please?
http://forum.xda-developers.com/showthread.php?p=3044607#post3044607
Hmmm, don´t have that Problem. Dunno why, but it works as it should.
Hi, just found a bug using gyrator on my new touch HD when typing a message in landscape mode. The dot (.) and comma (,) are inverted, so trying to type one of them gives the other as a result. Haven't yet tried without gyrator if the keybord gives the same problem, and will post it here later on.
Thanks

Permanent landscape view? + SOLVED +

This is the deal breaker for me.
The lack of keyboard will be better if I can make the screen horizontal as I do on my TyTn II. My screen is permanently on ladnscape mode.
As it looks better and there is no lag when switching.
Possible on the HTC Touch HD?
From the manual I read online and playing with it at the store I think its not possible.
Any info?
Thanks
Solution:
To remain constantly in landscapde mode:
You will need to rotate the screen and switch the phone dialer menu(screen) from the default HTC one to the WM dialer menu.
There are plenty of ways to rotate the screen and one way to switch from HTC dialer to WM.
N.B: You must disable the HTC Touch Flow 3d home menu by deselecting from the Home menu in settings.
To change to WM dialer from HTC dialer:
1- Download and install HD Tweak (thanks montecristoff & co.)
2- Use it to change the dialer to WM dialer.
To rotate the screen:
* Search on the forum for the registry tweak to make the option of selecting either landscape or portrait appear. Then go to Start/Settings/Screen and select landscape.
or
Use software like pbar or quickmenu or spb pocketplus to rotate the screen. Obviously pbar or quickmenu are preferable because they are free and very useful (thanks creators).
Cons:
1- With the WM dialer, you loose the ability to make video calls. Its not forever though, you can easily switch to HTC dialer from the HD tweak app.
2- You fore go the HTC Touch Flow 3d home screen. You will probably need to get SPB mobile shell or similar.
Pros:
1- Screen looks damn nice in landscape mode, or as I like to refer to it as wide screen!
2- More text in a more natural perspective. Things dont look so narrow.
3- Typing onscreen is much easier because the virtual keyboard is larger/wider.
I prefer this way because I did not like the way my previous TyTn II (Kaiser) lagged when it rotated from portrait to landscape every time I opened/used the physical keyboard. So I decided to keep it landscape. Turned out to be the best(my) option.
No landscape mode is supported! only TF3D today plugin doesnt support landscape!
so you will not have a problem!
Most software will work in landscape mode - see the FAQ:
"How do I make all applications turn when I rotate the HD?
Not all applications respond to the g-sensor (screen rotation)
There are a number of applications (eg. Gyrator2, GSen) that can help work around this issue. "
http://wiki.xda-developers.com/index.php?pagename=BlackstoneFAQ
Not sure which applications work in landscape and which don't though, but you'd get most of them in landscape.
The Keyboard is pretty usable in portrait with such a big screen too.
I want it in landscape mode permanently!
Not with some applications...
Well u can rotate today screen aswell but it wont look as nice.Tobad it rotates back though when u return from an applicaiton to the today screen.
But that should be fixable. Just try to rotate today via the built in rotate setting and u will se how it looks.
It looks a little weird on the right side of the screenshot but it disapperas immedeiately.
I use SPB mobile shell & SPB diary combined as my today screen.
So I wont be using HTC's today screen at all.
CorruptedSanity said:
I want it in landscape mode permanently!
Not with some applications...
Click to expand...
Click to collapse
Just use HD Tweak to enable the permanent landscape option.
chr5s11, in a hurry, could u plz give me the link to hd tweak.
CorruptedSanity said:
chr5s11, in a hurry, could u plz give me the link to hd tweak.
Click to expand...
Click to collapse
http://montecristoff.webs.com/
thanks a lot.
I could not find the tweak to enable landscape mode.
Something else you could try - install AE Button Plus, map one of the buttons (e.g. volume up) to "rotate screen", rotate the screen to the orientation you want, then re-load AE Button Plus and un-map the button. That should do it? I'm not entirely sure whether this will stick when you turn off or soft reset your device though...
Alternatively you could do what I have done, and map a long press of volume up to rotate one direction and long press of volume down to rotate the other way. There are occasions where portrait mode is better, others where landscape is better. Also means that volume controls still work as intended when pressed normally. I find gsen and gyrator a bit tempremental at times, so prefer having manual control over the rotation.
Even this will not cause proper rotation if your looking to stay in landscape. tf3d will not work in landscape without some sort of bodge from the diamond. I use my htc device in a car with landscape gps apps. I gave up on tf3d as maybe i don't need it because i've got voice commander. I set gyrator to switch to the phone app and rotate if the phone was landscape and happened to be on the manilla screen. I wanted the phone app to be landscape so i can see who i'm voice calling while in the car. this works, but if you switch to another app then back to the phone then the phone goes portrait and then only re shaking and landscaping the phone gets it to go landscape. Really I don't want to touch it when im driving. I guess I could set a voice command to rotate but I dont think its worth it. I also tried unhiding the landscape with a reg edit but once again the phone app re-portraits. Im now going to try a hreset and stoping the customize incase that affects the phone orientation if not im going a hunting a reg setting as maybe there is one that causes the phone app to portrait? I swear this was easier on my universal but i refuse to give up (and im kinda having fun )
[email protected] said:
Even this will not cause proper rotation if your looking to stay in landscape. tf3d will not work in landscape without some sort of bodge from the diamond. I use my htc device in a car with landscape gps apps. I gave up on tf3d as maybe i don't need it because i've got voice commander. I set gyrator to switch to the phone app and rotate if the phone was landscape and happened to be on the manilla screen. I wanted the phone app to be landscape so i can see who i'm voice calling while in the car. this works, but if you switch to another app then back to the phone then the phone goes portrait and then only re shaking and landscaping the phone gets it to go landscape. Really I don't want to touch it when im driving. I guess I could set a voice command to rotate but I dont think its worth it. I also tried unhiding the landscape with a reg edit but once again the phone app re-portraits. Im now going to try a hreset and stoping the customize incase that affects the phone orientation if not im going a hunting a reg setting as maybe there is one that causes the phone app to portrait? I swear this was easier on my universal but i refuse to give up (and im kinda having fun )
Click to expand...
Click to collapse
Again, in either HD Tweak or Advance Config, there's a bit where you can check which phone dialer skin is used (I think HD Tweak) maybe if you try setting the phone dialer to the original WM 6.1 dialer instead of the HTC one it might not keep switching back to portrait? You won't be able to make video calls, but that may be something you don't mind losing... I know I never use it...
No thats fine, I have ugly friends
woohoo thanks guys no more poking around in the dark with reg settings for me hd tweak did the job!
[email protected] said:
woohoo thanks guys no more poking around in the dark with reg settings for me hd tweak did the job!
Click to expand...
Click to collapse
I believe he is woohoo'ing because if you switch from HTC dialer type to WM dialer type via HD Tweak (you do loose the ability to make a video call), it then no longer rotates back to portrait mode after you switched to landscape.
Prior, it would remain in portrait mode till you accessed the dialer screen, then for some reason it would rotate back to portrait mode.
Now with the WM dialer style, it stays permanently in landscape mode.
This is with TF3d disabled of course.

Auto Landscape Question

I would like to be able to text in landscape, as fingerkeyboard is very nice in landscape mode
However I cannot get it to work.
I have made a mortscript, it just rotates my screen, regardless of settings i make.
I cannot set a key to rotate the screen as has been suggested.
Once more, Wisbar 3 will not run on my phone.
Any ideas?
not sure what to tell about landscape mode. However why do you want to use wisebar for? There should be any need for it.
Andrewwelton said:
I would like to be able to text in landscape, as fingerkeyboard is very nice in landscape mode
However I cannot get it to work.
I have made a mortscript, it just rotates my screen, regardless of settings i make.
I cannot set a key to rotate the screen as has been suggested.
Once more, Wisbar 3 will not run on my phone.
Any ideas?
Click to expand...
Click to collapse
Go to settings-> buttons and choose press/hold of camera key to rotate screen...
idk about wisbar, i dont know what would cause it to "not run"
thanks, the problem was solved
Also, i read that you could set how programs open in wisbar 3, so i could set it to auto run texting with landscape.
However its not an issue anymore since I can rotate my screen.

Categories

Resources