Smartskey scroll today screen? - 8125, K-JAM, P4300, MDA Vario General

I know Smartskey has a configuration setting for to change volume on today screen, and until now I had been using it that way. Thought if I changed that setting to disable volume on today screen that I might be able to use my slider to scroll the today screen (which has lately grown longer than one screen), but alas it does not for me. Does this work for anyone else? Any ideas how to make this happen, or is it even possible? Thanks!

Bump...any thoughts? Water, its been awhile since Smartskey has been updated, any chance you would add this to your next release?

If you use PocketBreeze from shsb,net then you can place all of your today plug-in into tabs and the d-pad will navigate the tabs.

Thanks I'll give it a shot.

Related

Can align screen shortcut be disabled?

I'm curious if its possible to disable the align screen shortcut on the Wizard (Enter Button in center plus Messages Button) Its really annoying when playing Doom or an emulator in landscape and having that popup all the time. Does anyone know a fix for this?
Unfortunately i dont have an answer for you. but i do have aquestion that i hope youcan answer. I got myself a doom launcher. It works well, but the control setup is terrible on the wizard. If i play in portrait mode, the fire button is the left soft key. So i ahve to fire with the same finger that i use to move. That makes the game unplayable. What launcher are you using and where did you get it?
I haven't done any testing or trying yet, but here is my idea...
what if you rename the align screen app, just so it stops it from launching?
Unfortunately i dont have an answer for you. but i do have aquestion that i hope youcan answer. I got myself a doom launcher. It works well, but the control setup is terrible on the wizard. If i play in portrait mode, the fire button is the left soft key. So i ahve to fire with the same finger that i use to move. That makes the game unplayable. What launcher are you using and where did you get it?
Click to expand...
Click to collapse
Its called GF Doom (I'm sorry but I don't remember where I got it or whom made it. Although if the creator see's this I would love for him/her to PM me as I also have some questions.) Anyway the launcher shouldn't control the Key Mapping, usually thats done in some sort of config file. With the program that I have the keys are mapped in the skin file's txt document.
Try this, unzip all contents into your storage card and run the launcher you should get Doom, Doom II, and Plutonia (sometimes called Ultimate Doom) as well as a 3rd party mod called Evilution. Keep the default skin, with that the keys I have mapped are:
The directional Buttons for Movement, Messages button for Fire and strafe(I would like to change strafe to volume up/down or Internet but have not been able to if you can figure this out let me know), and the softkeys for Select and Start.
The screen defaults to protrait with your choosen skin. To play in full landscape start the game in the options change the resolution to "low" and it will switch, Hope this helps
I can't seem to get the attachment to work here is the link ftp://[email protected]/Uploads/
the file is pocket doom.zip
A Flock of Seagulls are in my Wizard
It would be awesome to find a way to disable this. Is there maybe an entry in the registry that corresponds to what key combination turns on the align screen program. Maybe it could be changed to some combination of keys that is very unlikely to be executed simultaneously.
Until then, I'll continue to drink foo-foo drinks to calm myself while trying to play any action games.
GF Doom
Dragonedge:
What version of GF Doom do you have? Maybe I have an old version. When I enter full screen mode, the soft keys are shoot and strafe, while the message/IE buttons are menu and escape. I have to use the same hand to shoot as I do to move.
Thanks for the tip about full screen, I would never have figured that out. Now I'm not dissapointed with the program anymore.
Lol, funny posts. Is this still a problem? Does it need investigating?
V
I still have the problem........ working on some things now.
What version of GF Doom do you have? Maybe I have an old version. When I enter full screen mode, the soft keys are shoot and strafe, while the message/IE buttons are menu and escape. I have to use the same hand to shoot as I do to move.
Thanks for the tip about full screen, I would never have figured that out. Now I'm not dissapointed with the program anymore.
Click to expand...
Click to collapse
Not sure what version it is. Check out the ftp I uploaded a zip file with everything I use. Also you can edit the skin files to remap the softkeys as well as the messaging and internet keys. All the information about remapping the buttons is in the skins folder in a txt file names Skin Specs.
Lol, funny posts. Is this still a problem? Does it need investigating?
Click to expand...
Click to collapse
The only problem I had was being able to map the message and internet buttons as different keys. Also I would like to use the volume slider as a left and righ strafe but could not seem to get that mapped either. Any help there would be great.
I've made an app to disable this - VJCalibrula for Universal and Hermes.
Wizard requires a slightly different hack, and I don't have one to test on.
dragonedge: what hardware/ROM are you using? I'll try to get you to alpha test if you want.
V
dragonedge: what hardware/ROM are you using? I'll try to get you to alpha test if you want.
Click to expand...
Click to collapse
I wouldn't mind at all . I have the T-mobile MDA/Wizard with the 2.26 ROM
An app to disable this would be handy another idea that would be nice is an app that would let you specify another button combination for system shortcuts would be awesome.
VJCalibrula - disable align screen settings (alpha)
Guys, please give this a go.
I don't think it supports AKU 3.2 for now. Soon...
http://forum.xda-developers.com/showthread.php?t=282152
V

Screen Rotation Problem

Hi. When I open the keyboard, the screen orients itself to the landscape mode. When I close the keyboard, the screen resumes portrait mode, but on the right hand side, part of the screen is covered by the background. It is the same width as the scroll bar. I can't get rid of it until I reset the device. Any thoughts as to the problem and the fix? Thanks.
umm i had that issue before, do you have a lot of programs open? sounds strange, but when ever i have a lot of stuff running, my device cant handle it, so it kind of gets frozen onto the screen until i reset...
does this problem occur ALL the time, or when u run a certain problem?
Actually, it only happens on the Today screen. If I have any program running in landscape and return to portrait before exiting to the Today screen, no problems. Just when I go to landscape in the Today screen. Very odd.
what todayscreen plugins are you running?
I think only two: Tonaya Weather to Go and cLauncher. Pbar is also running, but I don't think it is a Today Plug-in.
Curious D said:
I think only two: Tonaya Weather to Go and cLauncher. Pbar is also running, but I don't think it is a Today Plug-in.
Click to expand...
Click to collapse
I had the same problem too with cLauncher but it is no longer there after I installed SPBMobile Shell which enable me to put cLauncher into one of its tabs buttons...
Why don't you try disabling cLauncher from your today..
I tried disabling each program alone. I had to place other today features (all standard with WM5) to create a list long enough to cause the scroll bar on landscape mode. When I return to the portrait mode, the space was still on the right side as before. Curiously, I put back the plugins, and the space was gone. Must have been refreshed.
Hi Curious,
To refresh the Today screen after the vertical scroll bar has disappeared try...
1) Select the Comms button to display comms options
2) Slip out the keyboard so that the comms buttons re-orientate
3) Slip the keyboard back in then exit the comms screen to return to the Today screen
Is the Today screen intact now?
Thanks. That worked. Now I'm just wondering why it's doing that in the first place. At least I don't have to reset to get back part of my screen. Thanks again.
Nice one! Well done. Not sure why it happens but I have the same issue but I don't mind it that much. I was guessing that it was the SPB Plus Today Plugin but I'm not sure.
Do you also use the SPB Plus Today Plugin?
No. Is that like cLauncher?
Hi Curious,
The SPB Plus Today Plug-in allows you to place shortcuts on the Today screen and group them under tabs which is nice but if you don't have it installed then that blows my theory
The only other thing I can think is that it is possible to alter the vertical scroll bar width by editing registry, the key is:
HKLM\System\GWE\cxVScr
The Default is (Decimal) 13 but you may be able to make this smaller so that it minimises the problem.
If you do find the cause then let me know
Thanks, but I think I'll stick with your previous idea. I'd rather not tinker with the registry if I don't have to since I'm not great at understanding registry changes.
cLauncher does what SPB plugin does. It's free and it allows different sizes for the icons. It really helps me with one handed function. It may be part of the problem if SPB does the same thing with the screen orientation.
Thanks again for your help.

"Mini S2U"

Source Code Finally Posted...
Sorry it took so long to post the source. I haven't been monitoring this thread for some time due to other time demands. A recent email reminded me that I promised to release the source, so here ya go...
Release 6 Notes Below...
About a week ago, I was looking for an app that would lock my wizard when it came out of suspend. I use a bluetooth headset for all my calls, so I rarely remove my phone from its carrier. However, while talking, I tend to move around and frequently the hang-up button would be pressed resulting in a disconnect.
Frustrated, I looked at a few apps. I really like the "Slide to Unlock" feature in the iPhone-like app S2U. It more or less suited my needs. However, my bluetooth headset wouldn't work with S2U installed.
Thus I set about writing an app that would "lock" the phone whenever it came out of suspend mode. The result is the app, LockDown, attached to this post. Once run, LockDown sits in the background waiting for "resume" event. At this time, it locks all keys and prevents any stylus events save one - a "Slide right to unlock" slider control. As with S2U, once the thumb tab is slid all the way to the right, the keys are unlocked and the unit once again responds to the stylus. Also note that LockDown only takes up 5k of memory.
LockDown has been tested on TNT.1933 (WM6) for the Wizard. It's compiled as a PPC 2003 app, so in theory it should also work on WM5 and any PPC 2003 devices. I've tested it with my Visual Studio WM5 and PPC emulators, and it worked fine. However, it couldn't test it on the real deals.
It's a new app. While I'm not experiencing any problems, please consider it beta for now. As such, don't wire it up as an auto-start link until you've run with it awhile and are certain it works as advertised. For now, I suggest just copying it to your \windows folder and linking to it there. If you have any problems, please report them, and I'll address them ASAP.
Release 6 Notes
The slider bug was fixed.
The Message option was fixed.
Application Invocation
Lockdown [-lock] [-close]
With the -lock parameter, the application starts in lock mode.
With the -close parameter, the application is removed from memory (if running).
Registry Options in Folder \HKEY_LOCAL_MACHINE\Software\Lockdown\Slider
Position (DWORD, 0):
If set to 0, the slider is centered.
If > 0, the slider is positioned X pixels below the "Top Taskbar".
If < 0, the slider is positioned X pixels above the "Bottom Taskbar".
Padding (DWORD, 2):
Pixel offsets for slider arrow from the left and right edges of the slider window.
Message (String, "Slide right to unlock.")
The text message displayed in the slider window.
TextColor (DWORD, 00FFFFFF hex):
Color of slider message. Note that the HEX color format is 00BBGGRR where BB is blue, GG is green, and RR is red.
FontPoint (DWORD, 16):
The font size of the slider message.
PenColor (DWORD, 00F04050 hex):
Color of the slider arrow.
BackgroundColor (DWORD, 00CCCCCC hex):
Color of the slider background.
WidthMultiplier (String, .92):
Must be a floating point value. Multiply this value with the lesser value of the desktop height or width (in pixels) to determine the slider width.
For example: If the desktop display is 240 by 320 and the WidthMultiplier is 0.9, the slider width is 216 (240 X .9) pixels.
HeightMultiplier (String, .22):
Must be a floating point value. Multiply this value with the lesser value of the desktop height or width (in pixels) to determine the slider height.
TabWidthMultiplier (String, 1.5):
Must be a floating point value. Multiply this value with the calculated slider height to determine the width of the slider arrow.
Note that the height of the arrow is always equal to the height of the slider.
EnableAnswer (DWORD, 1):
If set to 1, the answer button is enabled during an incoming call period (while the phone is ringing).
If set to 0, the answer button is always disabled.
EnableIgnore (DWORD, 1):
If set to 1, the ignore button is enabled during an incoming call period (while the phone is ringing).
If set to 0, the ignore button is always disabled.
After the installation, only the Position key will be present in the registry. I figure that most users will only tweak this value.
To modify the other parameters, add the appropriate keys with the defined types as shown in parenthesis. The default values are also listed in the parenthesis.
If you decide to tweak these parameters, please remove any shortcut to Lockdown from the StartUp folder. While I've taken steps to prevent "bad" values in these parameters, I still suggest this precaution.
Please note that Lockdown must be terminated and restarted before any changes to registry settings take effect.
As always, if you have any issues, please let me know.
W James
Very Great app...im sure many will find it useful
Does not work on my CDMA Touch
Tried it out but does not run on my CDMA touch.
It work for me on Hermes With schaps wm6 Ver 4.30
thanks.
WJames said:
Greets.
About a week ago, I was looking for an app that would lock my wizard when it came out of suspend. I use a bluetooth headset for all my calls, so I rarely remove my phone from its carrier. However, while talking, I tend to move around and frequently the hang-up button would be pressed resulting in a disconnect.
Frustrated, I looked at a few apps. I really like the "Slide to Unlock" feature in the iPhone-like app S2U. It more or less suited my needs. However, my bluetooth headset wouldn't work with S2U installed.
Thus I set about writing an app that would "lock" the phone whenever it came out of suspend mode. The result is the app, LockDown, attached to this post. Once run, LockDown sits in the background waiting for "resume" event. At this time, it locks all keys and prevents any stylus events save one - a "Slide right to unlock" slider control. As with S2U, once the thumb tab is slid all the way to the right, the keys are unlocked and the unit once again responds to the stylus. Also note that LockDown only takes up 5k of memory.
LockDown has been tested on TNT.1933 (WM6) for the Wizard. It's compiled as a PPC 2003 app, so in theory it should also work on WM5 and any PPC 2003 devices. I've tested it with my Visual Studio WM5 and PPC emulators, and it worked fine. However, it couldn't test it on the real deals.
It's a new app. While I'm not experiencing any problems, please consider it beta for now. As such, don't wire it up as an auto-start link until you've run with it awhile and are certain it works as advertised. For now, I suggest just copying it to your \windows folder and linking to it there. If you have any problems, please report them, and I'll address them ASAP.
W James
Click to expand...
Click to collapse
hi WJames,
any screenshots of your app? it sounds very usefull, but how does it look
like?
today plugin s2u
it was a dream cam true if was a today plugin, to the left...lock, to the right ...unlock, but in the today,
I use my standard windows lock today plugin, without the lock buttons, so when i touch any buttom , the backlight goes on (to see the clock and appointments in one clic).
today plugin s2u is the rigth way.
great work
red.schumi said:
hi WJames,
any screenshots of your app? it sounds very usefull, but how does it look
like?
Click to expand...
Click to collapse
as he said...it sits behind the screen..and waits for the resume event
Here's a screen shot as per request. It's very plain jane. I wasn't looking for the beauty of something like S2U. I merely wanted a functional app that didn't take up much real estate (5kb).
Once it's gone through the paces and looks to be bug-free, I'll release the code and you can tweak to meet your needs.
It gives a black screen with white text in the center of screen saying "Slide right to unlock." There is a box with a plain white slider. You cannot see your today screen.
edit: Sorry, had the page open while I tested it and did not notice your reply before posting.
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
To each his own, but i run S2U2 because it allows me to operate my phone via bluetooth while the buttons are locked. The builtin lock doesn't let me do that.
perasite said:
To each his own, but i run S2U2 because it allows me to operate my phone via bluetooth while the buttons are locked. The builtin lock doesn't let me do that.
Click to expand...
Click to collapse
Hmm, never had that problem with bulit-in lock. Yes, to each their own. I've installed/uninstalled S2U2 soooo many times. I love the app but end up finding that it serves me no real purpose (other then eye candy) and it gets uninstalled. New version comes out, installed for a about 3-4 hours, then uninstalled again.
Very Nice...can i Request something?
Hi
Thanks for the nice application
very small, problem free so far (on Eten M700 with WM6) & useful
Can i have 3 requests please:
1- can you make the slider spring back to the left if it was accidentaly moved to the right, right now it stays half way & i think if you make it spring back it will be more safe as a lock & it will look better too
2- can you make the slider button wider (double) so i can catch it with my fat fingers
3- can you add an icon, so i may put it in my today launcher list & it would look better than the plain white square, something like a lock or key or a hand can do.
I also noticed that sometimes as i come out of the suspend mode, the slider is either late to appear (1-2 sec) & may remain unresponsive for two or three trys to slide it to right (stays in place)
Once started i couldn't figure how to get rid of it & seems that only way is to soft reset to go back to normal wake up without locking
Hope these comments help..thanks again for nice work
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
Those apps you mentioned take a ****load of memory and add to battery drain because of all the animations and graphics. His is a simple slide function that sips memory and battery life. Very useful IMO. Sliding is good cuz I find unlocking the WM way to be annoying. I have to touch an icon to lock. Then to unlock, I have to press two buttons. With sliding, it locks automatically and unlocking is accompished in one simple motion.
You're right that there's already enough S2U programs.
I also think S2U2 is an awesome balance between beauty and speed/mem cost. For people who have only tried S2U, you really need to change to S2U2... WAY faster and stable!
In most cases, yes S2U isn't that necessary, as it's similar an extra step to get to your today page, but I need it because:
1) My alarms don't wake if the phone is on standby, so I put it onto S2U2 mode when I sleep
2) My audio manager doesn't go to the next song if the phone is on standby, so I have to lock my phone while listening using S2U2
I question how good it'll be to have Slide 2 Lock as a today plugin, since I don't need some extra waste of space. What I do is set the gesture right-to-left (using FTouchFlo) to execute S2U2 so when I slide right to left, it opens S2U2, then sliding left to right, unlocks it. Love it!
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
I hate to say it, but that's not quite true. If you setup the lock all buttons, sure you won't accidentally turn it on, but if you get a phone call, it doesn't just power right off (at least my 6700 doesn't) - it can and has made phone calls like that...
And as for the S2U/2 - they use quite a bit more memory than this. A 5k program use is great, although I won't use it because I like the clock on s2u2.
Great App
This is all I ever really wanted. Just a very simple slide unlock. simple.
Excellent.
thanks.
This simple slide to unlock app is perfect for my needs...Thanks!
The point here is WJames created an application for his own use and shared it with everybody. If someone think that it is not req. they might not use it. Anyway thanks for the nice little app.
Thanks! Great small app. Would be fantastic with a simple white clock above the lock bar though, so we could check the time on the phone without unlocking it. Thanks a bunch!

Home Screen Tabs

Hi,
Anyone know if there's a registry hack to remove the Home and Settings options from the home screen tabs at the bottom of the home screen? I actually use Settings a bit, but the Home option makes no sense to me. Not only is there a hardware button that takes you to the home screen, but as far as I can tell, the home screen tabs only appear on the home screen anyway, kinda making the option pointless! I'd prefer to put the settings option on one of my quicklinks instead to free up some space on the home screen tabs (I like a nice tidy maximum of 5 down there to prevent the need to scroll) and assume that if a registry hack exists, both options would sit in the same area.
Any help would be much appreciated.
Don't do it
There was a thread about it, but you would have to search for it. I don't remember anymore wharmt exactly the titel was.
I came from the same side and tried to remove the HomeTab.
1st point: it worked.
Sideeffect: not only the button in the slider vanished, but also the complete Homescreen.
So, it's better you leave the fingers off this topic.
If you want to find the thread, just search for all my posts (there aren't so many). This might be the easiest way to find it.
Hugo the JungleDyret
never mind, just reread your q, lol please ignore me.
careful
Only if your a pro , dont touch registries. Enjoy your phone and hope all is well.

Volume Indicator takes over screen

I'm not sure how other Rhodiums are set up...but the Tilt2 has the rather annoying feature of 'full screen' pop up volume indicator always coming up when you press the volume buttons. But in a very select few programs just a sidebar pops up...almost like a mini version. Is there any registry setting to change to make the 'mini' one the default?
This cab works for me....
http://forum.xda-developers.com/showpost.php?p=2718080&postcount=7
JVogler said:
I'm not sure how other Rhodiums are set up...but the Tilt2 has the rather annoying feature of 'full screen' pop up volume indicator always coming up when you press the volume buttons. But in a very select few programs just a sidebar pops up...almost like a mini version. Is there any registry setting to change to make the 'mini' one the default?
Click to expand...
Click to collapse
I actually prefer the full screen version, it is easy to use with the finger. Touching to the left or right of the volume indicator will remove the display and go back to your normal screen.
yatrg said:
This cab works for me....
http://forum.xda-developers.com/showpost.php?p=2718080&postcount=7
Click to expand...
Click to collapse
Does this make it smaller, or remove it? Reading it over, it seems that the latter is the case.
hitekredneck said:
Does this make it smaller, or remove it? Reading it over, it seems that the latter is the case.
Click to expand...
Click to collapse
It removes it. I like it, the volume buttons are more responsive instead of take a second or 2 to actually change, and the full screen is annoying.
I was bored at work and decided to poke around the registry to see if I could figure this out. I think I'm on to something. When you go to: /HKLM/SOFTWARE/HTC/VolumeOverlay/InhouseEnable2ndUI there are a bunch of folders for apps on the phone. I went into Manila and set it to 2 and then went back to the home screen (I have Sense 2.5 active) and had a little volume bar at the top of the screen when I went to change the volume. I may try to add other apps and see if it works, but I'm lazy, so I might just go play some tower defense instead. Hope this helps get someone else a little more motivated to help. hehe
firefurby said:
I was bored at work and decided to poke around the registry to see if I could figure this out. I think I'm on to something. When you go to: /HKLM/SOFTWARE/HTC/VolumeOverlay/InhouseEnable2ndUI there are a bunch of folders for apps on the phone. I went into Manila and set it to 2 and then went back to the home screen (I have Sense 2.5 active) and had a little volume bar at the top of the screen when I went to change the volume. I may try to add other apps and see if it works, but I'm lazy, so I might just go play some tower defense instead. Hope this helps get someone else a little more motivated to help. hehe
Click to expand...
Click to collapse
Setting this value to "1" will give you the slim vertical slider on the left of the screen, but this slider is not operable by touch on the screen, it is only a visual aid to let you know where your volume is at when you press the vol up and down hardware buttons.

Categories

Resources