Auto Landscape Question - Touch CDMA General

I would like to be able to text in landscape, as fingerkeyboard is very nice in landscape mode
However I cannot get it to work.
I have made a mortscript, it just rotates my screen, regardless of settings i make.
I cannot set a key to rotate the screen as has been suggested.
Once more, Wisbar 3 will not run on my phone.
Any ideas?

not sure what to tell about landscape mode. However why do you want to use wisebar for? There should be any need for it.

Andrewwelton said:
I would like to be able to text in landscape, as fingerkeyboard is very nice in landscape mode
However I cannot get it to work.
I have made a mortscript, it just rotates my screen, regardless of settings i make.
I cannot set a key to rotate the screen as has been suggested.
Once more, Wisbar 3 will not run on my phone.
Any ideas?
Click to expand...
Click to collapse
Go to settings-> buttons and choose press/hold of camera key to rotate screen...
idk about wisbar, i dont know what would cause it to "not run"

thanks, the problem was solved
Also, i read that you could set how programs open in wisbar 3, so i could set it to auto run texting with landscape.
However its not an issue anymore since I can rotate my screen.

Related

Can I use landscape mode but keep phone in portrait?

Hi all,
Just a quick question. Is there anyway that you know of that you can use your Magician in Landscape mode but keep the phone in portrait mode. I love the landscape for everything else but I find the phone is much easier to use with one hand in portrait. Is there a registry tweak I can use or something like that?I really appreciate any help you might give and I thank you in advance.
Crazy or wot? How will the screen sizes match, then you need scroll bars and you keep scrolling on your screen and also the left out space being blank looks akward.. Anyway, this option cannot be done..
Regards
Carty..
And cleartype is also not supported in Landscape and so it basically sux.
Carty said:
Crazy or wot? How will the screen sizes match, then you need scroll bars and you keep scrolling on your screen and also the left out space being blank looks akward.. Anyway, this option cannot be done..
Regards
Carty..
Click to expand...
Click to collapse
I think you misunderstand what imapfsr is asking for. Basically, what he needs is for the magician to switch orientation when he brings the phone app up.
You can do this (sort of) by using MortButtons where you can select the oriention of each app in the menu. BUT, the problem is if you use a task switcher then you will have to switch orientation manually. And, I think, if you get a phone call whilst in landscape mode, that it will stay in landscape mode.

Disabling soft keyboard?

Just curious is their a way to disable it only in landscape mode?
Im using pocketcm and it pops up when ever im sending a text.
I checked in the regestry and i tried sktools, but its an older release.
Im running Schap's WM6 Pro 4.22 lite ROM and ive checked in his advanced tools...nada.
there's a bunch of programs that let you set different soft keyboard depending on if you're in portrait or landscape mode; one off the top of my head is PQzII. i think QuickMenu might also have the feature, but i can't check right now. anyway, set whatever soft keyboard you want for portrait mode, but for landscape, grab the soft keyboard named NullKeyboard. it's like a blank keyboard, which is as close as you can get to solving your problem. just use PQzII (or whatever) to set the landscape keyboard as NullKB, and you're all set.
Worked like a charm...Thanks
On my Kaiser, if it pops up in landscape mode, if I just start typing with my hardware keyboard, it goes away automatically. Does the Hermes not do that?
jomo25 said:
On my Kaiser, if it pops up in landscape mode, if I just start typing with my hardware keyboard, it goes away automatically. Does the Hermes not do that?
Click to expand...
Click to collapse
It does, but not when i use contactcm. Even now i noticed when i use null keyboard contactcm it still shows 2 send buttons on the screen and the keyboard comes back but u cant see it.. so null didnt really help with that program, No biggie ill just tap the screen to drop the keyboard. once i do that it dosnt pop back up, unless i close the program.. only happends on 2 programs i use.

Permanent landscape view? + SOLVED +

This is the deal breaker for me.
The lack of keyboard will be better if I can make the screen horizontal as I do on my TyTn II. My screen is permanently on ladnscape mode.
As it looks better and there is no lag when switching.
Possible on the HTC Touch HD?
From the manual I read online and playing with it at the store I think its not possible.
Any info?
Thanks
Solution:
To remain constantly in landscapde mode:
You will need to rotate the screen and switch the phone dialer menu(screen) from the default HTC one to the WM dialer menu.
There are plenty of ways to rotate the screen and one way to switch from HTC dialer to WM.
N.B: You must disable the HTC Touch Flow 3d home menu by deselecting from the Home menu in settings.
To change to WM dialer from HTC dialer:
1- Download and install HD Tweak (thanks montecristoff & co.)
2- Use it to change the dialer to WM dialer.
To rotate the screen:
* Search on the forum for the registry tweak to make the option of selecting either landscape or portrait appear. Then go to Start/Settings/Screen and select landscape.
or
Use software like pbar or quickmenu or spb pocketplus to rotate the screen. Obviously pbar or quickmenu are preferable because they are free and very useful (thanks creators).
Cons:
1- With the WM dialer, you loose the ability to make video calls. Its not forever though, you can easily switch to HTC dialer from the HD tweak app.
2- You fore go the HTC Touch Flow 3d home screen. You will probably need to get SPB mobile shell or similar.
Pros:
1- Screen looks damn nice in landscape mode, or as I like to refer to it as wide screen!
2- More text in a more natural perspective. Things dont look so narrow.
3- Typing onscreen is much easier because the virtual keyboard is larger/wider.
I prefer this way because I did not like the way my previous TyTn II (Kaiser) lagged when it rotated from portrait to landscape every time I opened/used the physical keyboard. So I decided to keep it landscape. Turned out to be the best(my) option.
No landscape mode is supported! only TF3D today plugin doesnt support landscape!
so you will not have a problem!
Most software will work in landscape mode - see the FAQ:
"How do I make all applications turn when I rotate the HD?
Not all applications respond to the g-sensor (screen rotation)
There are a number of applications (eg. Gyrator2, GSen) that can help work around this issue. "
http://wiki.xda-developers.com/index.php?pagename=BlackstoneFAQ
Not sure which applications work in landscape and which don't though, but you'd get most of them in landscape.
The Keyboard is pretty usable in portrait with such a big screen too.
I want it in landscape mode permanently!
Not with some applications...
Well u can rotate today screen aswell but it wont look as nice.Tobad it rotates back though when u return from an applicaiton to the today screen.
But that should be fixable. Just try to rotate today via the built in rotate setting and u will se how it looks.
It looks a little weird on the right side of the screenshot but it disapperas immedeiately.
I use SPB mobile shell & SPB diary combined as my today screen.
So I wont be using HTC's today screen at all.
CorruptedSanity said:
I want it in landscape mode permanently!
Not with some applications...
Click to expand...
Click to collapse
Just use HD Tweak to enable the permanent landscape option.
chr5s11, in a hurry, could u plz give me the link to hd tweak.
CorruptedSanity said:
chr5s11, in a hurry, could u plz give me the link to hd tweak.
Click to expand...
Click to collapse
http://montecristoff.webs.com/
thanks a lot.
I could not find the tweak to enable landscape mode.
Something else you could try - install AE Button Plus, map one of the buttons (e.g. volume up) to "rotate screen", rotate the screen to the orientation you want, then re-load AE Button Plus and un-map the button. That should do it? I'm not entirely sure whether this will stick when you turn off or soft reset your device though...
Alternatively you could do what I have done, and map a long press of volume up to rotate one direction and long press of volume down to rotate the other way. There are occasions where portrait mode is better, others where landscape is better. Also means that volume controls still work as intended when pressed normally. I find gsen and gyrator a bit tempremental at times, so prefer having manual control over the rotation.
Even this will not cause proper rotation if your looking to stay in landscape. tf3d will not work in landscape without some sort of bodge from the diamond. I use my htc device in a car with landscape gps apps. I gave up on tf3d as maybe i don't need it because i've got voice commander. I set gyrator to switch to the phone app and rotate if the phone was landscape and happened to be on the manilla screen. I wanted the phone app to be landscape so i can see who i'm voice calling while in the car. this works, but if you switch to another app then back to the phone then the phone goes portrait and then only re shaking and landscaping the phone gets it to go landscape. Really I don't want to touch it when im driving. I guess I could set a voice command to rotate but I dont think its worth it. I also tried unhiding the landscape with a reg edit but once again the phone app re-portraits. Im now going to try a hreset and stoping the customize incase that affects the phone orientation if not im going a hunting a reg setting as maybe there is one that causes the phone app to portrait? I swear this was easier on my universal but i refuse to give up (and im kinda having fun )
[email protected] said:
Even this will not cause proper rotation if your looking to stay in landscape. tf3d will not work in landscape without some sort of bodge from the diamond. I use my htc device in a car with landscape gps apps. I gave up on tf3d as maybe i don't need it because i've got voice commander. I set gyrator to switch to the phone app and rotate if the phone was landscape and happened to be on the manilla screen. I wanted the phone app to be landscape so i can see who i'm voice calling while in the car. this works, but if you switch to another app then back to the phone then the phone goes portrait and then only re shaking and landscaping the phone gets it to go landscape. Really I don't want to touch it when im driving. I guess I could set a voice command to rotate but I dont think its worth it. I also tried unhiding the landscape with a reg edit but once again the phone app re-portraits. Im now going to try a hreset and stoping the customize incase that affects the phone orientation if not im going a hunting a reg setting as maybe there is one that causes the phone app to portrait? I swear this was easier on my universal but i refuse to give up (and im kinda having fun )
Click to expand...
Click to collapse
Again, in either HD Tweak or Advance Config, there's a bit where you can check which phone dialer skin is used (I think HD Tweak) maybe if you try setting the phone dialer to the original WM 6.1 dialer instead of the HTC one it might not keep switching back to portrait? You won't be able to make video calls, but that may be something you don't mind losing... I know I never use it...
No thats fine, I have ugly friends
woohoo thanks guys no more poking around in the dark with reg settings for me hd tweak did the job!
[email protected] said:
woohoo thanks guys no more poking around in the dark with reg settings for me hd tweak did the job!
Click to expand...
Click to collapse
I believe he is woohoo'ing because if you switch from HTC dialer type to WM dialer type via HD Tweak (you do loose the ability to make a video call), it then no longer rotates back to portrait mode after you switched to landscape.
Prior, it would remain in portrait mode till you accessed the dialer screen, then for some reason it would rotate back to portrait mode.
Now with the WM dialer style, it stays permanently in landscape mode.
This is with TF3d disabled of course.

[Q] How to switch into landscape?

I read everywhere "landscape" and i can't understand how to change my phone from portrait to landscape.Can someone help me?
Ps.I'm a new here and i don't know as much as you
Landscape mode...
There are only two apps which will switch to landscape automatically on the Diamond (without any additional software), and they are HTC Album and Opera Browser.
I would highly recommend installing this application if you'd like more apps to rotate. I've tried all the available 'screen rotation' apps here at XDA, and in my opinion, it's by far the best to use, and by far the least complicated to set up
If you want to manually rotate the screen, you can download Advanced Config, and set it to show orientation settings. Then after you soft-reset the device, <Rotate Screen> will be in the menu when you go into settings>buttons. Then you can set a button to rotate the screen.
Hope that helps
ok i managed to rotate the screen,but touchflo seems to have a problem so i can't use landscape mode.thank you guys

Landscape in Touch HD

hello, i would like to know if there are any programs that can user the touch hd in landscape. i use gyrator now. i only want the phone to go landscape in messaging and in the htc calculator. if gyrator can do that i would like to know how. please help me with this. gyrator irritates me when it turns over when im in a call and unlocks the screen and when im going through pics the screen turns black and then goes to the next pic.
hi, I don't know the program you are using, but I suggest you to use "change screen" or "flip it". in change screen you can set the orientatio of the display for every appliaction you want creating an exception.
bye, and good luck
Nicola
can u please post links of changescreen and flip it. i cant seem to fined that
Use Long-Press of call button
You can assign a long press of your call button to put the phone in landscape - it's obviously not automatic but it works.
Start>settings>buttons> then choose <rotate screen>.
Only works in Manila 2+ (cooked) ROMS
afr33s said:
You can assign a long press of your call button to put the phone in landscape - it's obviously not automatic but it works.
Start>settings>buttons> then choose <rotate screen>.
Only works in Manila 2+ (cooked) ROMS
Click to expand...
Click to collapse
You can enable this option in HDTweak/Advanced Config too
I did it this way myself as I'm using the stock ROM at the moment.
One thing to note though is that TouchFlo doesn't support landscape so if you close an app in landscape mode (thereby going back to Today/TouchFlo) the picture will go a bit screwy before reverting back to portrait.
use gsen then configure it to use those apps only.
Edit: That's a great idea. Now I have a need to install it.

Categories

Resources