Database Users

getting Win XP Pro to recognize my device...

This is probably really remedial but I'm a Mac user so it's foreign to me. I had an Imate Jam working great with Active Sync 3.8 on Win XP Pro.
Now I have the MDA and have installed Active Sync 4.1 (even tried 4.2). When I plug in the MDA, Windows makes the 'donk' sound to advise something's been connected but it just shows a 'Generic RNDIS' device connected and the add hardware wizard says the device cannot start (yes it's turned on).
I don't see any drivers on the T-Mobile CD that came with the product....is there something else I have to do to install this thing so Active Sync recognizes it?
<edit> I've attached a picture of the hardware manager...
When I uninstall the driver and re-plug in the device, it's immediately recognized as a Windows Mobile-based device but then I get the error: "A problem occured during hardware installation. Your device may not work properly." This happens each time I try it, even after a restart.
thanks,
Tim

hi buddy
i've had that XPerience when i've connected my brand new prophet (o2 xda neo) to my pc via usb 2.0 hub. i was going nuts, because all older partnerships to devices i've established before i've bought the hub did work... if you do the same - change it! at least one time you should connect the ppc directly to an available usb connector on your pc until you have established a partnership. also i would recommend to install active sync 4.2 beta (use the search here to find the link), it fixes some connecting trouble... let us know if any of these tips helped at all or if you found your own solution...
cheers, lutz

Try disabling your firewalls these are the usual culprits to stop syncing. You can add activesync to the list of acceptable programs if you use something like zone alarm firewall etc.. I have the windows firewall disabled.

Thanks for the suggestions. I've tried connecting directly to the USB port -- no dice. I only have the Windows Firewall which was already showing ActiveSync as an allowed application but I turned it off and still nothing changes.
The device manager reports:
This device cannot start. (Code 10)
Click Troubleshoot to start the troubleshooter for this device.
The troubleshooter basically instructs me to delete the device and try again, which I've done a dozen times, restarted both phone & computer. Still nothing.

Another trick that worked for me, if you have a network socket even if you dont have a network cable attached, enable network connections on your computer and try again. Whenever you change settings on your computer uninstall activesync and reinstall it. Hope that helps.

AS not connecting
For some reason, I had to repair/re-install AS. After re-booting, XP Pro/AS 4.2Beta recognized the Wizard again (Cing 8125) as all was well.
It's been stable the past few days, I think because I'm not trying to sync at work (I just cancel and use Guest).
Not a great answer, but good luck...
paul

Thanks, still no go. I do have an active Internet connection. I'm not so sure this has anything to do with ActiveSync as the computer doesn't even get to a successful install of the hardware....it always says a problem occured and the hardware may not work properly.

Succes...almost. I left the phone plugged in and restarted (after deleting the hardware profile) and when the PC rebooted it made that oh-so-sweet ActiveSync connected sound. Then AS quit and I was back to where I started in the post before....doh!
Just for kicks I plugged in my old Jam and it worked just fine, the hardward was recognized right away.
This leads me to believe something may be hosed on my MDA? Weird because it charges fine and everything else is great...it was a brand new unopened box from the local T-Mo retailer.
Hmmm...

BNDIS Connector
Guys,
Not sure that this is the solution, but this is what happened to me too. The way that Active Sync 4.x talks to a WM5 device is as a network device, not a USB device as in WM2003/Active Sync 3.x.
So, what you need to do is make sure that your PPC, which when connected to the PC shows up in the Device manager as a BDNIS network adapter, is to ensure that the BNDIS connector has an IP Address.
The easiest way to do this, connect the PPC to the PC and here the ping sound.
Right click on the My Network Places icon and select Properties
In the Network Connections Window, select Views > Details.
Find the Network Adapter that has the Device Name of the BNDIS connector.
Right click on this Network Adapter
Ensure that Internet Protocol (TCP/IP) is checked.
My guess is that it is not checked
If it is, check the properties for the Internet Protocol (TCP..) and ensure that DHCP is selected.
Hope this helps -

Re: BNDIS Connector
jkossowsky said:
Guys,
Not sure that this is the solution, but this is what happened to me too. The way that Active Sync 4.x talks to a WM5 device is as a network device, not a USB device as in WM2003/Active Sync 3.x.
So, what you need to do is make sure that your PPC, which when connected to the PC shows up in the Device manager as a BDNIS network adapter, is to ensure that the BNDIS connector has an IP Address.
The easiest way to do this, connect the PPC to the PC and here the ping sound.
Right click on the My Network Places icon and select Properties
In the Network Connections Window, select Views > Details.
Find the Network Adapter that has the Device Name of the BNDIS connector.
Right click on this Network Adapter
Ensure that Internet Protocol (TCP/IP) is checked.
My guess is that it is not checked
If it is, check the properties for the Internet Protocol (TCP..) and ensure that DHCP is selected.
Hope this helps -
Click to expand...
Click to collapse
This happened to me too. ActiveSync 4.1 worked perfectly until my WinXP Machine crashed and I had to reload.
When I reloaded, ActiveSync acting in the same manner.
I'll try this tonight and see if works for me. Hope so.

timskrastins said:
This is probably really remedial but I'm a Mac user so it's foreign to me. I had an Imate Jam working great with Active Sync 3.8 on Win XP Pro.
thanks,
Tim
Click to expand...
Click to collapse
You can still use your mac & missing sync 2.5 alpha & for most things it will work fine, but functionality is limited & sync only via BT. - it does ical, Address Book & tasks & time sync. & you can also install programs & documents as well. for media I just copy the songs straight to my mini sd card via a card reader.
Some programs will only install via windows, but as I have an intel iMac I run windows as well & activesync so far works well for me, but I have to disable the contacts/tasks/calendar or I end up with dupicate entries etc.

jkossowsky - awesome info. The problem I'm having is that the device does not show up in the network adapters. When I plug it in, it tells me there was a problem with the device and it could not be started.

Device Recognized
You need to install Active Sync 4.x before plugging in your device.
So, to be really really safe, go to Device Manager, look at the Unrecognized Devices section, find your unrecognized device and right click on it and remove it.
Install Active Sync 4.x
(if you already installed it, uninstall it, reboot and reinstall it again)
Once it is installed, plug in your device and it should be recognized as a Network Adapter.
If Active Sync does not automatically find the device, follow the instructions from my post above.

Uninstall Activesync, reboot, Reinstall Activesync, Reboot, plug in device.
pray
if that fails, attached are the proper INF files, manually update them to this, and see if that helps.

Thanks for the info, I'll give this a try. The thing that really killed me is that my old iMate Jam connected fine during this whole ordeal.
I exchanged the Wizard for a new one and still had the same issue. I finally tried syncing it on a new laptop running Win XP Pro and was able to get it to connect.
I'll try the suggestions above on the previous machine to see if I can get it to recognize the phone. Atleast I know the phone is not defective now.

Darn, no dice on that manual driver install...I get 'the specified location does not contain information about your device'

timskrastins said:
Darn, no dice on that manual driver install...I get 'the specified location does not contain information about your device'
Click to expand...
Click to collapse
try this;
http://forum.xda-developers.com/viewtopic.php?t=51649&highlight=

Hmmmm....
You may want to have a look @ support.microsoft.com
There's an issue with 4.x ActiveSync [AS] and Windows Firewall. Even though AS is listed in the exceptions, it doesn't work properly......
See here.......... http://www.microsoft.com/windowsmobile/help/activesync/default.mspx

I had this also - bugged me for weeks.
I found that the AS suite I downloaded from the MS site - regardless of version - would never find the Wizard. Only when I installed the version on the CD that came with the dvice would it connect - even though I think it was only AS 4.0.
Although I imagine you've aalready tried the CD version if you have one...

Can't get 8525 to work under Vista (32 bit)

Hi all, I have a frustrating problem with my Cingular 8525. I just formatted the comp and installed Vista Ultimate on it fresh. I downloaded WMDC but I can't get it to recognize my phone for the life of me. It keeps saying "connecting" forever and never does. I have done all sorts of installs, re-installs, hard resets, but I can't get it to detect at all! Can anyone help? Thanks in advance.

NYKUNLV said:
Hi all, I have a frustrating problem with my Cingular 8525. I just formatted the comp and installed Vista Ultimate on it fresh. I downloaded WMDC but I can't get it to recognize my phone for the life of me. It keeps saying "connecting" forever and never does. I have done all sorts of installs, re-installs, hard resets, but I can't get it to detect at all! Can anyone help? Thanks in advance.
Click to expand...
Click to collapse
first try to install the driver of your device.. go to device manager and look for unknown device at OTHERS..
good night and good luck

The driver is installed... it displays HTC USB Sync. I am getting frustrated . Stupid Vista.

USE the search function dude
Hermes vista config guide

Also make sure you dont have any firewalls active. I have had issues syncing my phone with my computer when using AVG's firewall. I simply disabled the firewall and it fixed my problems.

mrvanx said:
USE the search function dude
Hermes vista config guide
Click to expand...
Click to collapse
I already tried that guide... still not working. Ill try disabling the firewall

go to settings->connections->usb to pc and then check Enable Advanced network functionality.
If that doesn't work remove/uninstall htc sync device, unplug device and plug in device to reinstall the htc sync device after you have set the usb to pc connection settings.

Also try using a different USB cable and plugging it into a different port, you never know, it could just be something defective.
But I'm putting my money on the firewall

I had a problem connecting my 8525 to my Vista machine. It would say connecting but it would never finish 'connecting'. It took a while but finally I figured out what was causing it. It was the 'recording' .wav files in the notes directory that were causing the issue. If you have any .wav files in your notes directory I'd suggest moving them to say your SD card or deleting them. That fixed the 'connecting' problem for me and since I did that it's been syncronizing fine ever since.

I tried everything listed in here at once.... something worked I should have done each step by step to pinpoint what exactly... but its working now. Thanks everyone!

NYKUNLV said:
I tried everything listed in here at once.... something worked I should have done each step by step to pinpoint what exactly... but its working now. Thanks everyone!
Click to expand...
Click to collapse
Same for me. I had a load of problems getting the Mobile Device Center working with my HTC TyTN. First I was unable to even install the driver when I first connected my device. The "add new hardware" wizard always tried to connect to Windows Update and install an updated driver which then failed. The solution was to let it fail and manually install an older driver from the list using the icon in Device Manager. After that I could start Windows Update and download the latest update.
Then I had the same problems as you describe. When I started WMDC it just hung while displaying "Connecting". Looking in the task manager I noticed that the wmdc.exe process was consuming more and more memory, up until something like 250 MB, after which WMDC just showed "Error". Finally I got it to work. It is hard to pinpoint exactly what I did to fix it. I know that the "advanced network features" under USB in connection settings on the TyTN need to be ticked and the device showing as a Windows Mobile Device instead of HTC USB Sync.
Initially I did a hard reset of the TyTN. Further, I manually unistalled and reinstalled the driver in Device Manager a couple of times. I tried to reboot both the computer and the TyTN several times. Also, I did restart the "Windows Mobile-based device connectivity" service after plugging in the cable. Finally it just recognized my device and I could setup the partnership. Now I can sync over bluetooth too and skip the cable.
HTC phone support was not very helpful with this problem. "We will call you back". Yeah right.

Mobile cofiguration:
Dopod 838 Pro
LVSW 4/17/07 WM6
Hard SPL
PC configuration:
Windows Vista Business Edition
I encountered the same problem. Currently able to sync back by hard resetting my device. The USB to PC connection on settings does not appear to affect the sync problem.
I suspect that the problem arise when I originally sync with an XP machine.

What worked for me was to enable the advanced usb setting on the phone as mentioned...then while the phone is still plugged in, I removed everything associated with the phone from device manager on the pc. Once that was done, I unplugged the cable, waited a few seconds, and plugged it back in (with the advanced usb settings still checked.) Worked like a charm with WMDC.

I had problems with all sorts of "connectivity" in Vista, including connecting up my Trinity, and setting up my xbox 360 as a media extender.
As soon as I uninstalled MS One Care it all started working.

Cannot connect to Windows Vista - Orange SPV M700

Hi all I've owned this great phone since they first came out.
I had Vista on my machine then and I synced it up no problems.
2 Days ago I did a fresh install of Vista when it was all done my phone synced up again fine.
However yesterday I did a final fresh install just so I could get it just the way I want it without excess programs on.
However now my phone will just not connect.
I'm good with PCs however I'm stumped. It makes the ding sound when connect however WMDC does not recognise.
I have the latest WMDC x64 patch installed. Any pointers would be greatly appreciated.
PS. this is a great forum
Si

Can none of you Trinity gurus help??
Or point me to another forum which might have info I require on.

I am also having problems connecting to vista - windows mobile device centre, with my M700.
When I connect to the PC the driver installs as Microsoft Windows Mobile Remote Adapter, and the device centre does not reconise that the device is connected.
Does anyone have the correct driver they could pm me or post a link, or any fixes.

pda's dont use real drivers they use generic drivers (1 driver for all of them)
that driver comes with the sync program
many many pda owners have issues with vista
by no fault of their pda's

Hmmm try do a window update or use another usb port

I have managed to resove this issue by clicking on:
Start>Settings>Connections>USB to PC> Then unticking the option "Enable advanced network functionalaty".

I had a similar problem when I tried to connect my brothers m700 to my p.c. using vista etc... It only recognised my m700 that was sync'd with it earlier and not my brothers for some reason, weird. No matter how many times I rebooted the p.c. or his m700 it would not sync at all, it just did not recognise that it was connected via usb.

mdyson said:
I have managed to resove this issue by clicking on:
Start>Settings>Connections>USB to PC> Then unticking the option "Enable advanced network functionalaty".
Click to expand...
Click to collapse
I had the same problem when I first got my P3600, after I did this it worked fine.

If Windows Live OneCare is installed on your machine, it may be blocking the device connectivity. Please click here for the steps to configure Windows Live OneCare to allow the device to connect.
The driver installation may not have completed successfully. If you think this may be the case, follow these steps:
Keep your device connected
From the desktop, go to Start > Start Search
Enter "Device Manager" or "devmgmt.msc" to launch the Device Manager window
Look under the "Network adapters" node for "Microsoft Windows Mobile Remote Adapter". If this is not present, skip to step 5. Otherwise, right-click "Microsoft Windows Mobile Remote Adapter" and choose to "Uninstall"
Look under the "Mobile Devices" node for "Microsoft USB Sync". If this is not present, skip to step 6. Otherwise, right-click "Microsoft USB Sync" and choose to "Uninstall"
Disconnect and reconnect your device. Your device driver will re-install and Windows Mobile Device Center will launch.
Good Luck!

Vista connection problems

Hi,
My hdd gave up in my laptop other day bought another 1 installed vista
now im having connection problems both with bluetooth and via usb with my
t-mobile ameo
does any 1 know if there is a update some where to get them working again
ive done a windows update and installed windows mobile device centre
thanks

Im running Vista business edition and had no problems at all - even updated my rom!
What do you get when you plus the Ameo in? Does it show up in the Device centre?

sync centre has just got the usual offline folder
windows mobile device centre 6.1 has the mobile device settings and the not
connected bit at the bottom
its so weired it all synced b4 theres nothing different installed setup etc...
on the device it says "to synchronize this device, you must install activesync 4.5 or newer on your desktop computer"
thanks

How Wierd.... mine lliterally just fired up autoomatically.

In your PPC, go to SETTING -> CONNECTIONS -> USB TO PC. Untick the "ENABLE ADVANCED NETWORK FUNCTIONALITY". Remove the connection by unplugging your USB cable and the plugging it again. No guarantee this will work, but you may try.

IT Works
i tried the unticking the advance option still didnt work...
i thought about the user account control in vista this came as my mobile
data card for my laptop wasnt installed correctly and after checking out the
install log and it saying access control n a load of other stuff saying
permission denied etc.... i thought id turn vistas user account control off this
fixed my data card problem ......i then pluged my t-mobile ameo in and hey
presto it picked it up as a black HTC Advantage due to my mobile 6 rom
upgrade

I believe Active Sync won't work on Visat, you need Mobile Device Center, available here
http://www.microsoft.com/downloads/...ea-9df9-4920-af33-3a0e2e4e7beb&displaylang=en

Makes sense as I have crappy user control switched off as it annoyed me greatly!

Vista Utlimate Connects but refuses access.
This solution worked instantly for us.
cayotte said:
In your PPC, go to SETTING -> CONNECTIONS -> USB TO PC. Untick the "ENABLE ADVANCED NETWORK FUNCTIONALITY". Remove the connection by unplugging your USB cable and the plugging it again. No guarantee this will work, but you may try.
Click to expand...
Click to collapse
We had downloaded the upgrade device driver and the Windoze Vista replacement for ActiveSync... as Vista dictates on first connection.
We got the sound effect acknowledging USB connection, but Windoze Mobile Device Centre obstinately ignored the connection.
We tried the tricks suggested by the mages and sages, like adding ports etc. to the firewall, and deleting the driver in the Vista Device Manager... forcing it to re-install. None of it worked for the Ameos.
We removed the Mobile Device Centre and the upgraded driver, resolving to connect to the Ameos only via our XP Tablet instead.
It seemed that the USB connection was being made, but something else was blocking it.
Then this possible solution (reproduced here) caught our eye.
It was the work of a moment to follow the path and remove the check in that item.
Imagine our surprise and delight when we connected to Windoze Vista Ultimate again... and remember that there is no upgraded driver or Mobile Device Centre installed now... and we got the "what shall I do with this device" dialogue box. We checked the item to open the device in a folder each time and... it did... and does... just that.
We do not need synchronisation for our use of the Ameos since all of the significant email and document traffic occurs on the laptops and Tablet, but we can appreciate why someone would want that Mobile Device Centre to be re-installed. We won't be doing that anytime soon though.
Congratulations to you cayotte, and this forum as a whole.
BTW, I read about the problems folks have with the Microdrive. We have two Ameos. One works great with the Microdrive, the other one does not, and we have to leave it for data files only.
The older unit is the one which works well.
We already had the User Account Control turned off so I cannot say if that had any effect.
QF
cayotte said:
In your PPC, go to SETTING -> CONNECTIONS -> USB TO PC. Untick the "ENABLE ADVANCED NETWORK FUNCTIONALITY". Remove the connection by unplugging your USB cable and the plugging it again. No guarantee this will work, but you may try.
Click to expand...
Click to collapse

WM6 does NOT sync with Vista running OUtlook 2003/2007

I just got a new laptop running Vista and I am just having tremendous issue trying to sync my Sprint Mogul (HTC Titan) to Windows Mobile Device Center (WMDC --> ActiveSync replacement in Vista) and Outlook 2007.
Basically, when I connect my Mogul via USB (NO Bluetooth), the device shows that it is connected for syncing to the laptop. But WMDC shows "connecting..." all the time and just not syncing. The only way to do this is to reboot the laptop.
The same phone sync just find to a Windows XP machine. I have tried the following but to NO AVAIL:
- Disable "Enhanced network USB function" in the device (Start -> Settings -> Connection -> USB to PC
- Remove all background services in the laptop, like Anti Virus, Vista Sidebar, Spy Sweeper.
BTW, my Mogul is running WM6, no custom ROM or anything.
Does anyone have the same issue and can provide me with the solution? It seems Vista and WMDC just breaks everything.

what does sync center say?? I'd try going into WMDC and unchecking all the sync content and seeing if it will connect...chances are theres something that it's trying to sync and it won't....I've also ran into a problem recently where outlook must be open for it to sync properly...you can try that.

There are 2 WMDC applications:
WMDC (Start -> Programs): just say connecting
Sync Center (on Taskbar): when I double click, under "View Sync Partnership", it just say "Disconnected"
I always run Outlook 2007 before Sync, so I suspect something else in Vista causing it.
I have tried a fresh Vista install, and it sometimes work, sometimes doesn't.
What I found out is like this:
1) Start Vista and Outlook
2) Connect device to WMDC - WORK
3) Disconnect, but Outlook remain
4) Reconnect - DOESN'T WORK

lanwarrior said:
There are 2 WMDC applications:
WMDC (Start -> Programs): just say connecting
Sync Center (on Taskbar): when I double click, under "View Sync Partnership", it just say "Disconnected"
I always run Outlook 2007 before Sync, so I suspect something else in Vista causing it.
I have tried a fresh Vista install, and it sometimes work, sometimes doesn't.
What I found out is like this:
1) Start Vista and Outlook
2) Connect device to WMDC - WORK
3) Disconnect, but Outlook remain
4) Reconnect - DOESN'T WORK
Click to expand...
Click to collapse
I have Vista and Outlook 2007 and never had a problem with syncing. I just tried the 4 steps you outlined and it worked when I first connected my Mogul and also when I reconnected the Mogul. What version of WMDC are you running? I have 6.1.6965.
I usually don't run Outlook before doing a sync. I've never had a problem with this either way.

2 Things
I know you said that it shows something about being connected, but have you gone to My Computer and tried to access your device? This will help determine if its just not being recognized by the system properly, or if the sync software is hosed.
Additionally, try searching here or on ppcgeeks.com for the "update vista drivers". I didn't need them - but apparently some folks did. Depending on how long you've had Vista, and/or whether or not you've done M$ Windows updates, I'm thinking your driver could be hosed.
I too have Vista - and I can sync just fine as well as transfer files back & forth through My Computer. I also sync the same device up with an additional computer (how sweet is that? I wish iTunes would freakin' work like that one of these days!) that's on XP.
Would love to help more if need be. I'll be around Saturday if you want to PM and try going over your settings vs mine or something.

Sometimes I have to connect my mogul up to 6 times before it connects properly to my Vista laptop. I now always open device manager before connecting the mogul. It doesn't connect properly until the Microsoft Windows Mobile Remote Adapter driver installs correctly under Network Adapters AND the pocketpc driver installs correctly under portable devices. And it is very wierd because sometimes it works on the first try, and other times like I said b4 it can take up to 6 tries before it works right. I have looked up the error codes that it generates in the Event logs and there are a lot of people who are having the exact same issue, so I chalk it up to a Vista problem and hopefully it will get better after SP1 is released.

mem_reddog said:
Sometimes I have to connect my mogul up to 6 times before it connects properly to my Vista laptop. I now always open device manager before connecting the mogul. It doesn't connect properly until the Microsoft Windows Mobile Remote Adapter driver installs correctly under Network Adapters AND the pocketpc driver installs correctly under portable devices. And it is very wierd because sometimes it works on the first try, and other times like I said b4 it can take up to 6 tries before it works right. I have looked up the error codes that it generates in the Event logs and there are a lot of people who are having the exact same issue, so I chalk it up to a Vista problem and hopefully it will get better after SP1 is released.
Click to expand...
Click to collapse
How did you get this MS Windows Mobile Remote Adapter and Driver? Windows Update or manual download link?

I don't know how to set my ppc-6800 (same as Mogul) to sync my contacts and e-mails with outlook 2007. When i connect it to my PC, it appears in my computer and i can browse in and transfer files in both ways. But still no contacts or e-mail sync...i would like to get help.

skny said:
I know you said that it shows something about being connected, but have you gone to My Computer and tried to access your device? This will help determine if its just not being recognized by the system properly, or if the sync software is hosed.
Additionally, try searching here or on ppcgeeks.com for the "update vista drivers". I didn't need them - but apparently some folks did. Depending on how long you've had Vista, and/or whether or not you've done M$ Windows updates, I'm thinking your driver could be hosed.
I too have Vista - and I can sync just fine as well as transfer files back & forth through My Computer. I also sync the same device up with an additional computer (how sweet is that? I wish iTunes would freakin' work like that one of these days!) that's on XP.
Would love to help more if need be. I'll be around Saturday if you want to PM and try going over your settings vs mine or something.
Click to expand...
Click to collapse
I agree with the problem being a driver issue, mine searches for updates every week. I've had a vista machine since october last year and havent had any problems at all with syncing(usb or BT) or changing roms. As a suggestion when a first got my 6800 in July and switched to the 2.17 rom i had to upgrade to a newer version of WMDC, check your version and the most up to date one on HTC's website. Hope that helps.

Hi all,
I am bringing this thread back because now I have another issue with Mogul syncing to Vista with Outlook 2007. This is actually for my friend but the issue is simply puzzling and I hope anyone have insight on this.
My friend have another laptop and a Mogul and when he connect the device to the laptop via USB, Vista Mobility Device Center (MDC) only recognize it as a MEDIA PLAYER, not as a PDA.
I tried the following:
- Disable/Enable USB Advanced Network functionality (System -> Settings -> Connections)
- Hard reset the Mogul
- Connect the devices and run Windows Update (to check if there is a driver issue)
When I connect that same Mogul to a Windows XP, it sync just fine.
What do you guys think?

Guys,
Just a quick update on the issue whereby I cannot sync the Mogul to Vista: the driver updates did the trick! After installing the driver update, syncing works just fine! I wonder why M$ didn't include this update under Windows Update.
Thanks for the help all!

lanwarrior said:
Guys,
Just a quick update on the issue whereby I cannot sync the Mogul to Vista: the driver updates did the trick! After installing the driver update, syncing works just fine! I wonder why M$ didn't include this update under Windows Update.
Thanks for the help all!
Click to expand...
Click to collapse
Please, where did you get the driver updates. Was it a driver on the phone, or for vista.
I am having similar probs, except it appears to sync, but deletes all contacts (inclunding sim!) from my touch dual.

It's shown in the thread above. The driver is available in PPCGeeks. I forgot which thread there, though.

Solution
lanwarrior said:
I just got a new laptop running Vista and I am just having tremendous issue trying to sync my Sprint Mogul (HTC Titan) to Windows Mobile Device Center (WMDC --> ActiveSync replacement in Vista) and Outlook 2007.
Basically, when I connect my Mogul via USB (NO Bluetooth), the device shows that it is connected for syncing to the laptop. But WMDC shows "connecting..." all the time and just not syncing. The only way to do this is to reboot the laptop.
The same phone sync just find to a Windows XP machine. I have tried the following but to NO AVAIL:
- Disable "Enhanced network USB function" in the device (Start -> Settings -> Connection -> USB to PC
- Remove all background services in the laptop, like Anti Virus, Vista Sidebar, Spy Sweeper.
BTW, my Mogul is running WM6, no custom ROM or anything.
Does anyone have the same issue and can provide me with the solution? It seems Vista and WMDC just breaks everything.
Click to expand...
Click to collapse
I found this by accident.
Click on Start > Settings > Connections > USB to PC and *uncheck* "enable Advanced Network Functionality."
Problem solved.

dclong said:
I found this by accident.
Click on Start > Settings > Connections > USB to PC and *uncheck* "enable Advanced Network Functionality."
Problem solved.
Click to expand...
Click to collapse
YUp, I tried that before, but it doesn't work. I have to update the driver to WMDC 6.1.
BTW, to everyone: driver is available here --> http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displaylang=en

lanwarrior said:
YUp, I tried that before, but it doesn't work. I have to update the driver to WMDC 6.1.
BTW, to everyone: driver is available here --> http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displaylang=en
Click to expand...
Click to collapse
I'm sorry -- was not aware of that. I have automatic updates set up so this question of driver update/renewal never came up for me.

Does this update work for anyone?
My Mogul is hanging on my laptops side...it say "Connecting to Unidentified Device".
And then it just stays there for ever....

Booya said:
Does this update work for anyone?
My Mogul is hanging on my laptops side...it say "Connecting to Unidentified Device".
And then it just stays there for ever....
Click to expand...
Click to collapse
The only way I could get around it is to disconnect my device, remove the device from WMDC - and - remove the PC connection in ActiveSync on the device and start ALL over again.
Also, I found that when you have a lot of data (like I do) to start syncing only piecemeal, i.e. do the first sync with the defaul settings first, then add folders, then add emails, etc.
IMHO - WMDC is so inadequate.

Oh well, tried all of these and still no joy

This works for me on my Sprint Mogul a/k/a HTC PPC-6800
timbouk said:
Oh well, tried all of these and still no joy
Click to expand...
Click to collapse
Disable the Windows Mobile DNS cache. This requires a registry
modification. Windows Mobile does not include a registry editor, but
free third-party editors are available (such as one from www.phm.lu).
Change the value of:
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\InternetSettings\
DnsCacheEnable to 0
If DnsCacheEnable does not exist, create it as a DWORD value.
A soft reset is necessary for the change to take effect.
==============
After that I'm out of ideas ...