Related
i read pages of threads on this forum, but im not getting nowhere fast!
I'll start at the begining, mda t-mobile original rom, working as it should, upgraded the rom several diff ones and not working, tryed the origainal rom and not working!
rom now on the mda,
ROM version 2.8.7.1WWE
radio version 01.13.10
protocal version 4.0.13.24
ExtROM version 2.8.7.101
ive intsalled DJVW WLAN 302.11g Activator 1.0.cab
Now the problem, when the wifis switched on it takes awhile to even detect the network, my old ipaq would be conected as soon as switched on?
when it does detect the network it trys to conect for about 2mins then gives up ( in same room as router )
it wont conect but i can see the mda has downloaded about 20kbs of info, but can get no further?
Am i missing something here?
Also where do you go to check you have the latest drivers, updates, newest rom etc
Thanks for taking the time to read this :wink:
Hello,
I have found that i am having similiar problems with Wifi after updating to the latest qtek 9100 ship ROM on my qtek 9100 device.
the device can "see" the WIFI but it will not/connot "use" it.
Ya same here. I can turn on the wifi but it doesnt connect anymore ! I know fopr sure that there are at least 4 wifi connections around me normally but I dont see any of them !
I had this problem but was able to fix it by giving my router my DNS settings (that I got from my ISP).
For some reason, certian routers will not serve the MDA with any sites unless it has the IP address of your ISP's DNS server.
This should take care of your problem.
If this doesn't work, go to your public library and see if you can get on their wifi. This will help you troubleshoot to see if there's actually a hardware problem.
Actually the problem i had is unusual in that i could connect to any open WIFI zone aswell as our work and home one, BUT it will not carry any traffic AT ALL. Only uses GPRS NO wifi.
I actually hard reset the device yesterday and ensured that Push email was switched off - WIFI is functioning fine now.
There is still one problem. When i cannot the device to my PC for an active sync. It will sync with the PC but throw an error when trying to sync with exchange server via the WIFI.
The error on the PC active sync is
"The server could not be reached. This can be caused by temporary network conditions
SUpport code:85002003"
It also throws an error on the device.
This is a right pain and did not happen on the previous version of the ROM. It means i have to do a seperate exchange server sync when disconnected from the PC. ANyone have ideas on how to fix this.
Incidently, another thing I have noticed with the NEw ROM is that contact lookup is noticeably slower - sometimes I have to wait for a few seconds
before the contact i am searching for actually comes up. This is in comparison to the immediate results of searches in my old ROM.
Jass
right ive reload a rom, and the wifi works, then after adding each of my aplications, ive tested the wifi conection, i found wififofum being the problem.
now i know the developer of wififofum has an wizard himself , that runs this aplication no problems, ut on mine it seems to just freeze the wifi, giving a rssi signal of 90 no matter how close or far im from the source?
http://img.photobucket.com/albums/v12/XRfil/mdawifi.jpg
Dear All,
I've downloaded (from Vodafone mentioned in this Forum) the Blackberry connect Client (VPA Compact III) and I've installed it on my Tytn (with SIM as Blackberry company service and the Activesync BB on my PC) without any problems.
After the PIN syncronize, when I start the service on my Tytn, it works only for 2/3 seconds after that it goes automatically in NOT CONNECT. I've read the PDF document, and I've done the correct installation and so on ...
Where I worng ???
Is there anybody to use/work with the BB on Tytn ???
Is necessary to install the BB connect on Tytn with the SIM (with the BB serive active) present on Tytn ???
Please help me :roll:
Thanks a lot
Best Regards
Ciao, Cesare
ritmia said:
Dear All,
I've downloaded (from Vodafone mentioned in this Forum) the Blackberry connect Client (VPA Compact III) and I've installed it on my Tytn (with SIM as Blackberry company service and the Activesync BB on my PC) without any problems.
After the PIN syncronize, when I start the service on my Tytn, it works only for 2/3 seconds after that it goes automatically in NOT CONNECT. I've read the PDF document, and I've done the correct installation and so on ...
Where I worng ???
Is there anybody to use/work with the BB on Tytn ???
Is necessary to install the BB connect on Tytn with the SIM (with the BB serive active) present on Tytn ???
Please help me :roll:
Thanks a lot
Best Regards
Ciao, Cesare
Click to expand...
Click to collapse
I'm very happy !!! Now it works ;-)
Thanks a lot
Best Regards
Ciao, Cesare
what did you do to make it work?
C.
cvdbl said:
what did you do to make it work?
C.
Click to expand...
Click to collapse
During my tests, I've installed more BB connect versions on my Tytn, and it didn't work. Before to install the correct version one (here: http://support.vodafone.de/index_l3_2z.html#vpacompactIII), I've done a hard reset, I've installed the correct BB connect (2.1.2.16), I've installed the BB desktop 2.1 on my PC, I've set the company mail (Blackberry service instead of Internet instant mail), I've sync them and after that it works
P.S.:
I've got a company phone: Blackberry 7100v, and for my test I've installed the company SIM on my Tytn ...
Ciao, Cesare
hi
i have also a problem with my mda vario II. it cannot connect register to the blackberry server in our company. i test various files from vodafone and from xda-developers but with no sucess. everytime in the status field stand No Connection. But the gprs connection works fine when i use it with ie or other programs which uses it.
also i tested the sim in my old mda III where it works fine. i also deleted the account on the bes and createt a new one without sucess.
are there any settings that i have to make??
thanks
daniel
That's very strange :shock:
Have you tried with a hard reset, and install the correct BB connect :?:
Ciao, Cesare
today i tried it also to connect with blackberry. i made a complete reset of the mda varioII and installed the blackberry client from the vodafone site. but nothing changed, i already get no connection when i want to register to blackberry.
after that i called my provider(t-mobile austria) for help with my problem. there i get the information that there is no BB-client from them at the moment. they also said that my downloaded BB-client from vodafone will never work with my t-mobile device. but when i try this client with my mda pro and mda vario blackberry works perfect without any problems.
is there anybody who have a working mda varioII with a t-mobile rom and BB-client?
Great stuff... Don't normally post but just wanted to let you all know that the Vodafone Blackberry Connect software works a treat on my Dopod 838 Pro with Starhub in Singapore. Real push Lotus Notes e-mail from our company server in Houston.
Thanks a lot ,
philg
Problems conecting to BES
I installed the BBConnect_PocketPC_BB_2.1.2.16 on my TyTN, the ActiveSyncInstaller2.1.1.9 on my desktop, syncronized with the BES, and the status does not show conencted, it says network available for a while and then gets back to not connected. I tried blackberry support, HTC support, Cingular support (which I verified that I have the blackberry connect unlimited plan active) and nothing. Can someone help me please.........
JaimeCS,
I had a similar issue... and found the oddest behaviour.
When I had a UMTS connection - it wouldn't connect at all...the BBC client tried to start a connection, then gave up. After about 3 attempts over a minute, it finally goes back to 'Suspended by User'.
Now, here's the odd part. When I tried this again from the Office, I'm out of UMTS coverage and only get EDGE, this time it connected ! I go back home to UMTS coverage and it fails again.
But now I'm on to the next problem. I get NO EMAIL whatsoever coming down... it just sits there... I've verified the server set up since I got a Blackberry to try it out (god, that HW is ugly).
Let me know if any of this helps ? plus if you get it connected using Cingular !!!
Cheers
Dave
I made work part of the problem, I manually switched the network and the band to GSM in the device, and the status is connected and the messages are not syncronizing with my BES. Blackberry support sais that Cingular needs to active the services. Then, I realized that I have two services from Cingular the unlimited PDA and the blackberry connect unlimited. I used to have the "G" in the screen because of the unlimited PDA plan and not from the blackberry connect. Cingulr removed the PDA unlimited plan from my account, and now I don't have neither internet not blackberry..... does anybody knows which is the correct blackberry plan in USA?
Hey guys, just got my MDA yesterday and I have a netgear at home.
Netgear, open access ...no security.
Got the MDA, and it shows it detects my netgear, but it will not connect, a constant display of connecting appears and than it goes away.
I called T-Mobile and that didnt help at all. They have no idea.
I updated my Rom to 2.26.10.2 WWE based on T-Mobile HotSpot tech support said.. But its not working.
I did several soft reset, but stlil it will not connect to the netgear router ?
Any idea ? what I can do ?
I changed all the settings and everything...
Please help
Ben
anyone ?
Anyone ?
Please help ?
I don't know what the solution to this problem is, but I have a similar problem. I have a qtek 9100, I need to reset my AP in order to connect. I only have this problem with my own AP (A D-link). I took op contact with Qtek, they have no clue.
I had the same problem when I had a screwed memory card inside the phone, i took it out and I could then use wifi.
I've noticed as well, that removing the SD card before configuring Wifi does the trick. Once it has been configured you can putt you SD card back in and connect without any problems.
Hello, I have an AT&T 8525 that I installed this official WM6 HTC TYTN rom onto:
http://forum.xda-developers.com/showthread.php?t=320829
http://rapidshare.com/files/46467733/HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe
At first I didn't have any issues with WIFI, but now I cannot even get any data to download. I am connected according to Comm manager and all other settings. I have another device (PPC 6700) that connects fine and is superfast so it is not the router. I want to avoid a hard reset or flashing a new rom because I have everything set up nicely with a lot of apps as well. Does anyone know what the issues is???
Thanks!
Also, I loaded Opera Mobile onto the phone yesterday, then decided I didn't like it and removed it, and then tried to connect WIFI. Wouldn't work, don't know if that was the problem though?? I tried to reinstall and remove Opera twice and WIFI still isn't working.
Hi All,
Currently using a iMate pda2k (Blue Angel) with the first-released Helmi Windows Mobile 6 Professional ROM installed. I've really got two problems, but one that is annoying me more, and that is that I can't connect to my home wireless network because I have got WPA2-Personal security enabled. I found on another forum post that I need to update the AKU, but i'm pretty sure I did that when I first installed the ROM. My other problem is that I can't turn the GSM radio off (phone). But i'm more in need for a solution to the WPA2 problem. Should I upgrade to a newer ROM, because i'm thinking of updating to Windows Mobile 6.1 or is there another solution (please no 'go back to Windows Mobile 2003!).
Thanks in Advance,
Timbo.
w. http://www.graphicgraffiti.com.au/
g. iMate pda2k (w) WM6 Helmi
The BA WLAN driver does not support WPA2, some users report that they ca connect to WPA2 protected networks but these cases are rare
You may try a combination of WPA/WPA2 with TKIP encription (not AES) if the router will let you. I just returned a new Belkin N router back just because my BA wont connect to the wifi, even with WPA/WPA2 mixed mode.
Hello,
If it helps you, I have a Zyxel HW660-D1 and using wpa/tkip I can connect with my BA, but only with xplode WM6.1 roms and helmi old rom (that with wifidriver v2), with other WM6.1 roms (Dvha79_ddt or Hoangdat_vista from PDAViet) I can't connect to my wireless.
Our beloved BA isn't compatible with WPA2 - AES encryption, I think it's because of wireless chipset limitation.
PDA2K WM6 Professional issues
I am badly in need of help guys out there !!! Please get off this hook !!!
I have exactly the same problem you are having, I have been trying to work on all these issues for about 4 days until now. I can not get connected to my home wireless lan neither do I can restore my phone contacts. I even tried to go for an upgrade to another WM which is 6.1 and 6.5, but with no use cause every time I try to upgrade my PDA2K device disconnects and nothing happens except for "error 101 connection" that keeps appearing everytime I try to upgrade.
Help me out guys pleeeeeeeeeeeeeeeeeeeeeeeeeeez
I am not sure how many times i have said this, BA + WPA2 = No GO, use WPA-PSK TKIP instead BA does not support WPA2, there are very rare situations that the access point can connect it in compatiblity mode like WPA, but it depends on the model ot the AP, Router, Modem or whatever device you use
Meandhim said:
I am badly in need of help guys out there !!! Please get off this hook !!!
I have exactly the same problem you are having, I have been trying to work on all these issues for about 4 days until now. #1 I can not get connected to my home wireless lan neither #2 do I can restore my phone contacts. I even tried to go for an upgrade to another WM which is 6.1 and 6.5, but with no use cause every time I try to upgrade my PDA2K device disconnects and nothing happens except for #3 "error 101 connection" that keeps appearing everytime I try to upgrade.
Help me out guys pleeeeeeeeeeeeeeeeeeeeeeeeeeez
Click to expand...
Click to collapse
I think you are mixing 3 problems here which should be addressed separately.
Posible Solutions:
#1:Read Xplodes post right after yours
#2:Clarify if you can or can not. "If Cannot" Restoring contacts saved on your phone requires the use of Active Sync. It also requires MS Outlook on your PC. You can sync via USB or Via Blue Tooth. Does your phone sync with your pc?
#3:Error 101 during flashing of new ROM = you have not connected your phone to the PC or its not in Serial Mode. You must follow step by step procedures on BlueAngel Wiki.
error 101 is present when the device is not in bootloader mode prior to upgrade, with wm2003 this was possible because thre was command to put the device in bootloader mode trough activesync, but in newer os it does not work