Hey guys, just got my MDA yesterday and I have a netgear at home.
Netgear, open access ...no security.
Got the MDA, and it shows it detects my netgear, but it will not connect, a constant display of connecting appears and than it goes away.
I called T-Mobile and that didnt help at all. They have no idea.
I updated my Rom to 2.26.10.2 WWE based on T-Mobile HotSpot tech support said.. But its not working.
I did several soft reset, but stlil it will not connect to the netgear router ?
Any idea ? what I can do ?
I changed all the settings and everything...
Please help
Ben
anyone ?
Anyone ?
Please help ?
I don't know what the solution to this problem is, but I have a similar problem. I have a qtek 9100, I need to reset my AP in order to connect. I only have this problem with my own AP (A D-link). I took op contact with Qtek, they have no clue.
I had the same problem when I had a screwed memory card inside the phone, i took it out and I could then use wifi.
I've noticed as well, that removing the SD card before configuring Wifi does the trick. Once it has been configured you can putt you SD card back in and connect without any problems.
Related
I got a SandDisk SD wifi with no memory that I use with my I-mate, or let me say I used to use , I've upgraded yesterday to wm2003se and installed the latest driver availble on sandisk website (Oct 03) and till now I couldn't connect to the access point...
Any help is apreciated.
Regards,
anyone please ??
RE
Hi!
Is I-Mate the equivalent of O2 XDA II? If yes, then I might have the answer
I was also having problem with my SANDISK SDIO WiFI card and my O2 XDA II with WM2003SE all these while since the upgrade until JUST NOW.
By a stroke of luck I manage to coneect it to my home DLINK router.
Go to START -> SETTINGS -> CONNECTIONS ->NETWORK CARDS -> NETWORK ADAPTERS -> Change the 'My network card connects to :' WORK (not internet)
Use cable to activesync your PPC to your Desktop PC making sure that the connection is there. Insert your WiFi card and see whether it connects. If not, de-active activesync, take out your PPC and soft reset with the WiFi card in place. Put it back into your cradle and allow activesync to proceed and see whether your card connects.
See whether this procedure works
thanks for your reply,
I tried what you have suggested with no luck :?
My network card tries to associate with no success
thanks anyway
RE
ArcticCat,
Sorry to mention. I was also playing around with this freeware, Hitchhiker, then and was connected. After which I deleted Hitchhiker.
Here,
http://www.kasuei.com/hitchhiker/
Try connecting via Hitchhiker and see whther it connects. Make sure you follow my previous procedure too.
thanks again for you reply but no success either
let me ask some question
1) You have a SandDisk SD I/O Wifi with no memory ??
2) what drivers are u using for it?
3) you have wm2003se installed
4) what was the problem before?
I am seeing the AP but cannot associate to it.... same thing with you?
Regards
RE
ArcticCat
Answers
1) I'm using SANDISK SDIO WiFi card without memory
2) I'm using SOCKET WLAN Tools Mobile Edition v2.01. Get it from Socket Communications
3) Yes, I've WM2003SE installed on my O2 XDA II
4) Same problem like yours, previously for a long time till last night. Can associate but cannot connect.
I'm using ActiveSync v3.8
I suggest you just play around with Hitchhiker and my procedure for a while. Reset and disconnect/connect activesync if you require. FI, Hitchhiker cannot connect too in my case.
Good luck
Now we have the same configuration with the only difference that I am still not able to connect :?
I didn't quite understood what do u want me to do with ActiveSync
thanks once more
RE
ArcticCat,
Did you get your SDIO WiFi driver here:-
http://www.socketcom.com/support/support_wlan.asp?Type=SDIO
The one for WM2003
Yes I did... NO luck today neither
RE
If you're able to get a copy of the new Socket WiFi Companion which is not released on its website yet you can give a try.
were u able to get it?? if yes can you tell me where from ?
thanks
RE
Can you pm your email address to me and I'll email to you.
However, use at your own risk as I've NOT try it yet
He all,
I got some connection problems.
If i insert my WiFi card(sandisk 256+WiFi) my I-mate detects it and the antanna is displayed in de buttom of my screen but whenni go to my browser(internet) the message :Cannot connect with current conection settings. To change your connection setting, tap settings.
But i have no id how to change the settings to make it work with my wireless network.
Also the WiFi card couses to freeze the system every once and while.If i take the card out everything is okey again.
I got the I-mate jam with latest rom and radio drivers and I already installed the drivers of the WiFi card.
I hope you guys can help me out with this one
Thanks in advance
GreetZ
Nick
Nobody that can help a poor guy out ?
GreetZ
Nick
I had a similar problem with my XDAII, believe it is likely to be a known problem and related to the dual function of the card.
Have you tried the website for updated drivers?
The other options are to ensure that it you have the correct settings for Work or Internet to connect to.
I assume you are connecting to a wireless Access Point on a home based WIFI system, or are you trying to connect to public hot spots?
Contacted clubimate?
It started after I installed the latest rom version you guys think I migh work if I installed the older version?>
GreetZ
Nick
which rom are you referring to, an original manufacturer version or a cooked rom from this site?
if it is a licensed version, I would contact imate, have you installed the latest drivers from the hardware supplier?
I think you may have to go to your wireless settings and ensure connect to the internet is selected. also,scan local networks and ensure you are connecting to the correct network.
my problem when I got that message was cause it was connecting to the guy next door with wep key required.
are you able to connect to your host pc via wifi using a mapped network drive? or are you simply using a wifi hotspot?
if using a wifi hotspot, you should select auto connect to non-preferred networks.
start - settings - connections and choose wireless or wifi or network and have a look at what is actually happening in the network configurations. if you are really struggling still, try posting some screen shots of your network connection settings
sorry misread post
Just to end this topic.
I returned it to sadisk and they said it was the memmory function.
I couldn't get a new one form the store i bought it so I got my money back,
I now have a new one without the extra memory.
GreetZ
Nick
i read pages of threads on this forum, but im not getting nowhere fast!
I'll start at the begining, mda t-mobile original rom, working as it should, upgraded the rom several diff ones and not working, tryed the origainal rom and not working!
rom now on the mda,
ROM version 2.8.7.1WWE
radio version 01.13.10
protocal version 4.0.13.24
ExtROM version 2.8.7.101
ive intsalled DJVW WLAN 302.11g Activator 1.0.cab
Now the problem, when the wifis switched on it takes awhile to even detect the network, my old ipaq would be conected as soon as switched on?
when it does detect the network it trys to conect for about 2mins then gives up ( in same room as router )
it wont conect but i can see the mda has downloaded about 20kbs of info, but can get no further?
Am i missing something here?
Also where do you go to check you have the latest drivers, updates, newest rom etc
Thanks for taking the time to read this :wink:
Hello,
I have found that i am having similiar problems with Wifi after updating to the latest qtek 9100 ship ROM on my qtek 9100 device.
the device can "see" the WIFI but it will not/connot "use" it.
Ya same here. I can turn on the wifi but it doesnt connect anymore ! I know fopr sure that there are at least 4 wifi connections around me normally but I dont see any of them !
I had this problem but was able to fix it by giving my router my DNS settings (that I got from my ISP).
For some reason, certian routers will not serve the MDA with any sites unless it has the IP address of your ISP's DNS server.
This should take care of your problem.
If this doesn't work, go to your public library and see if you can get on their wifi. This will help you troubleshoot to see if there's actually a hardware problem.
Actually the problem i had is unusual in that i could connect to any open WIFI zone aswell as our work and home one, BUT it will not carry any traffic AT ALL. Only uses GPRS NO wifi.
I actually hard reset the device yesterday and ensured that Push email was switched off - WIFI is functioning fine now.
There is still one problem. When i cannot the device to my PC for an active sync. It will sync with the PC but throw an error when trying to sync with exchange server via the WIFI.
The error on the PC active sync is
"The server could not be reached. This can be caused by temporary network conditions
SUpport code:85002003"
It also throws an error on the device.
This is a right pain and did not happen on the previous version of the ROM. It means i have to do a seperate exchange server sync when disconnected from the PC. ANyone have ideas on how to fix this.
Incidently, another thing I have noticed with the NEw ROM is that contact lookup is noticeably slower - sometimes I have to wait for a few seconds
before the contact i am searching for actually comes up. This is in comparison to the immediate results of searches in my old ROM.
Jass
right ive reload a rom, and the wifi works, then after adding each of my aplications, ive tested the wifi conection, i found wififofum being the problem.
now i know the developer of wififofum has an wizard himself , that runs this aplication no problems, ut on mine it seems to just freeze the wifi, giving a rssi signal of 90 no matter how close or far im from the source?
http://img.photobucket.com/albums/v12/XRfil/mdawifi.jpg
Please Help
I have a brand new SPV M5000 from work. Set up to get email with exchange server for emails diary etc. This works fine. In the Comms Manager wifi will not turn on, to be clear this is not about connecting to a wireless network, wifi will not ven turn on. 3G etc all fine, but wireless will not activate.
Orange seems stumped, previuosly it did work ,according to my IT manager before the sim was activated. Since then no joy. I have hard and soft reset to no avail.
Can any of you throw a light on this?
I have lookd through the other messages on this forum and cant find any mention of it
Thanks in advance.
RH
I have a similar problem on my universal. Any ideas from any one on how to fix it ?
I've been having the same problem. sent it back to O2 they fixed it twice and it is still being gay!
Please please please somebody help me!
My XDA Exec started off fine, and then over time it took more and more attempts to connect to a wifi service. I recently sent it away to have the USB port re-attached, and since then it won't connect at all.
I have upgraded the ROM and it hasn't made any difference.
Does anyone know if there is an aerial for the wifi electronics? Could it be broken? Is this more likely to be a firmware / software issue?
Any clues would be gratefully appreciated.
Thanks
Ian
I had the same problem with my Wizard, it seemed it was a hardware problem
I have searched a lot on this forum and have not found any solution to the wifi problem on HTC diamond....I am sure there are experts in this forum who have worked around their way and I would request them to post their comments as to how they have got their WIFI talking on HTC Diamond...........
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
There is no wifi problem on the Diamond. it works fine for on every ROM I have used.
It sounds like you haven't set the access key in your Diamond.
wi fi problem........
the_scotsman said:
There is no wifi problem on the Diamond. it works fine for on every ROM I have used.
It sounds like you haven't set the access key in your Diamond.
Click to expand...
Click to collapse
Would be kind enough to elaborate......Mine is open WIFI router, there is no need for any pass keys......my other phone O2 stealth perfectly connects while HTC diamond doesn't.........
Please do have a problem and that the reason there are so many view on this thread in just 30 minutes....
thanking you in advance for your help........
i've never known any problems, have u flashed a cooked ROM or changed the Radio?
if so, i would try going back to stock and see if it works then, if not, send it back as faulty.
I'm not aware of any 'known issue' with the WiFi on the Diamond either, certainly mine and my girlfriend's both work fine in this respect. If you've never successfully connected to any wireless network then you've got a hardware issue; send your phone back to be repaired and stop wasting time looking for a software solution would be my advice.
wifi,,,
Glad that a lot of users doesn't had problem with the wifi, but it's an iminent malfunction, and looks to be a hardware problems...
I had change my rom and radios a lot, and the issues are the same:
Opened the comm manager or the settings-connection-wifi, turn on the wifi, and it's turn off again...
In my case, often worked properly after soft reset, and i often connect with 3g or gprs, but...it's a suck!!!
Step by step......connecting to wifi....
Medulla said:
I'm not aware of any 'known issue' with the WiFi on the Diamond either, certainly mine and my girlfriend's both work fine in this respect. If you've never successfully connected to any wireless network then you've got a hardware issue; send your phone back to be repaired and stop wasting time looking for a software solution would be my advice.
Click to expand...
Click to collapse
Would you please step by step elaborate ....connecting to an open wifi network......will be really greatful........
if your diamond is not connecting to your router there is some posibilities. Are you at home or work, at work on the AP you can have security setings and MAC filtering. At home if you have not implement security and mac filtering you can be to far of your router, You must be between -60 and -80 Db max and at -80 it is easyer with a MIMO router, etc...
Got the same problem as you
this is how i fixed mine.
1) I download a radio rom thing and install it
2) restart the device and the wifi is working perfectly.
No problems at all!
Got the same problem as you
I download a radio rom and install it but still turn off again
HTC touch pro problem wifi
Hello,
I have NOT got connection to secured wifi net. I tried it at home and etc., when I try connect to open wifi, it is OK, but secure wep, wpa etc. is problem,
I reinstall my router at home, I unlocked my HTC and tried all avillable ROM from xda and a chanched different radio.
Now I have got official ROM from HTC - last from page support of HTC,
but problem is here.
I would like restore my ROM, but my pc update had failure and pls help me with this problem.
Try the following:
Change router channel
Try connecting to another router / network LAWFULLY!
Hard reset
Take it to the vendor of the phone