Related
Hello...
I recieved my MDA last saturday, and since then, have been trying to figure everything out. After multiple calls to tmobile, and even a trip back to the store, i'm still stuck with a few questions that i cannot seem to get answered.
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Ex: I'm using a green theme. When in landscape mode, i have a single green square in the middle of the screen with a strip on either side(left or right)
2. My phone is HORRIBLY slow when and if ANYTHING 3rd party is installed. I've tried today plugins that control the memory usage(figured that would help)...however, it just slowed things done. My phone usually runs at about 14mb Free Program Memory, out of the total 44MB(This seems horrible...with just the default programs installed*for the most part* and maybe agile messenger running.). If i install a today plugin, or a game...this drops below 10mb. Therefore, phone usage can be very aggravating. I cannot think of any other way to increase this memory expect for ONE thing. Would it be possible to transfer ALL programs, applications, etc to the miniSD Card(i have 1gb now, with a 2gb in the mail). This way...i certaintly would not be topping out the usage of the card, and hopefully I can free up alot of space on the phone.
3. As we all know, the packaged IM programs are AWFULLY slow and inconsistent. After a bit of research and trials, I have settled on using Agile Messenger. I'm loving it...expect for a few things.
The MAJOR problem I have with it, is the pop up notification. Its annoying to be surfing the web or playing a game, just to have a pop up tell you that you have recieved a message, EVERY TIME you get a new message(which can amount to a great deal in a short time). I've looked all over for a setting, so unless I missed it, is there any way to shut this off?
A side issue with this program, and also the connectivity of the phone is...:
(even WITH the GPRS hack*always on*), I still lose connection(with 2-4 bars of signal) and therefore i get signed off of Agile, rather often. This isnt' such a problem with me, as seeing it takes a short time to log back in. However, when you look at the conversation from another person's point of view...all you see is
"Soandso" Logged off
"Soandso" logged on
etc
etc
(not sure if that last part was a question or a statement, but if theres an answer, i'd like to hear it!)
4.
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
5. After I went about and downloaded the Eten dial pad skin, I noticed that all of my contacts were unable to receive contact photos. I quickly realized that any contact that was saved on my SIM card from my previous phone was stuck in this predictament. However, if i were to create a new contact account, it quickly allows me to customize them alot further. Therefore, i was curious if there was any way to transfer my contacts on my sim card>my phone in a fashion that the phone will accept them.
I'm sure i'll think of more questions(these are just the ones that I havent been able to answer after days of searching :-D)
Thank you so much in advance!!!!!!!!!!!!!!!!!!!
Hi,
the speed of the HTC Wizard is very slow. That was my problem too.
for question no. 2:
Moving the apps to the card will result in more free space on the phone, OK, but running the apps from the card will also result in low speed, because the card is slower than the main memory. So I think you won't get more speed by this.
Try to overclock the device with OmapClock. My device works like a charm with 264 MHz (original was 180 MHz).
Use a tool like FreeUp RAM, which is part of the SK-Tools-package.
Running OmapClock and freeing up the RAM from time to time brings significantly much more speed. There is almost no waiting time if you click on an icon. You can even run Skype with OmapClock (many other users do so).
HTH
I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?
The Wizard isn't slow. Install a Qtek rom without branding, and it will be much faster.
even the sales associate at tmobile seemed to think it was slow. Upgrading to a different ROM sounds ok, but i'm trying to keep everything via tmobile. thaks for the tip though.
Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.
TazMan1688 said:
I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?
Click to expand...
Click to collapse
There have been long discussion about what is safe with the Wizard on this forum.
See, for example, http://forum.xda-developers.com/viewtopic.php?t=40284
Also, the SmartsKey app automates startup of OMapClock.
http://forum.xda-developers.com/viewtopic.php?t=41060
(It has a number of other uses as well.
Hope this helps.
TazMan1688 said:
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
There is a known problem with backlighting. See http://zendrui.free.fr/PZPForum/viewtopic.php?t=197
Also, check to see what events PZP is handling for profile-switching. For example, if you have calendar-based or time-based rules, they may switch your profile without you doing anything. Go to Settings, Control to see what you Switches you allow. Or check Time and Calendar for your profiles under the Configuration option.
As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat. Seems overly risky to make such an expensive device, run at higher speeds than its DESIGNED to do. But i'm still not sure, it almost DOES seem worth it...decisions, decisions...
Yes, Thank you for clarifying that...I mostly meant, the inconsistency of PZP with the timing of profiles. It seems as if the program will "switch" to the correct profile, but i don't always see a change in the operation of the device itself. Ex: I have it set to go to school mode at 7:30am, this past week(since its spring break, i've noticed that my incoming calls all had the normal ring volume, as well as system tones, etc...
Although it "says" ""School"" i don't really know if its truely in that mode?!
On this note, i have a question about setting the times(which is what i really want to accomplish). My phone goes to LOUD around 5:30am, School at 7:30 am, Normal at 1:55pm, and Quiet at 4pm.
Nooow, do i have to put two times in the school profile such as 7:30 am-1:54(5)???? so that it has an entire time interval...or can i just tell it when to start, and the next profile will automatically kick in and stop the previous.
Also, does putting the phone in standby or shutting it down have any effect on the profile??
I'm sorry in advance if i'm asking very basic questions, i've just been searching for a long period of time, and i usually can't find a specific answer to my question. So I decided I would spend the time to actually discuss MY problem, with hope someone can help. Again, sorry for any inconvienence or redudant questions.
TazMan1688 said:
As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat.
Click to expand...
Click to collapse
I have a german T-Mobile MDA Vario (= HTC Wizard) and I'm overclocking it permanently with OmapClock and SmartSKey. There is no overheating as far as I can say/feel. I can speed up to 264 MHz (original = 180 MHz). If I try more, the device softresets itself without any damage or loss of data. It's a kind of security mechanism. Of course, battery life is a little bit shorter when overclocking it. But I'm sure, slightly overclocking doesn't damage the device! Maybe the lifetime of the device will be a bit shorter, lets say 6 months in 5 years, but you won't realize that, because you won't be using your device in 5 years. You will sure own some other phone when the CPU dies. Together with the tool "FreeUp RAM" (comes with SKTools), I can reach a comfortable speed for everyday use. But never forget: The Wizard IS quite slow, compared with other devices. You can find smart workarounds for that, but don't close your eyes on that fact.
For running any GPS navigation tools I would consider buying not a Wizard, but a much faster device, if you would ask me. I'm using my Wizard only for addresses (~ 700 items), calendar (~ 1200 items) etc., and without overclocking and using a program like Pocket Informant 2005, that would be an annoying, maybe impossible thing. At the beginning, I had to wait almost 10-15 seconds until e.g. the month overview was created. Switch to the following month - wait again. Choose a specific day - wait again. Oh my god! That needed more patience than I had.
Are you running a basic install without all the phone networks customisation bloat?
you can do this by hard resetting (you will loose data doing this) and then doing a softreset when the customisation dialogue pops up after setting time zone etc.
this will speed things up over an install with tmobiles bloatware. I run tomtom and my device is in general as reponsive as the magician it replaces.
good luck with your phone
R
So guys based on your opinions and experience is it worth for me to get the MDA or should I go with a different carrier and a XV/PPC-6700 ?
Hi yozh,
I don't know the 6700-device at all. Maybe we don't have it here in good old Germany, or maybe under a differnt name. Does it have a bigger display (better for navigation)? Does it have a faster CPU? Then take that one! In my eyes I would never like to use the Wizard for navigation. It's only a better phone, not more, not less. For all other purposes I would buy a bigger machine. I do not want to talk bad about my own device, I have bought it and I use it and it's OK for the everyday things I do with it. It has nothing to do with "I'm proud of my device", like some people seem to be here. It's a phone, man, not a Ferrari or a Rolex. You would tell yourself lies, if you would call the Wizard a powerful device. I had a Palm Tungsten T5 before, and THIS is a powerful device. 2600 items in the calendar (true!), and the reaction time was half a second if you tap on the screen! You can go and have a coffee if you do that on a Wizard.
Just think about it. If you buy a Wizard, try it for a day and then write to me what you think about that phone.
Mh. My english should be better, I know.
Just my 2 Cents!
Hi well the 6700 is the apache I belive and the CPU is 416mhz but its not a "dual core" everything else screen adn such is pretty much the same. Thanks for the reply
SO any one on this forums can recoment apache over MDA ?
yozh said:
Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.
Click to expand...
Click to collapse
See my posts on http://forum.xda-developers.com/viewtopic.php?t=48448 regarding processor speeds and TomTom.
Wow really TOMTOM runs better on the MDA then on a 400mhz DELL ? Then Im set defenatly getting the MDA, I like GSM network provide3rs better anyway and plus there are so much choices with the phones. I wish I was able to aford the JASJAS that looks really good.
Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Check out your running processes and close all the ones that are not needed or load an app that really closed things.
TazMan1688 said:
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Click to expand...
Click to collapse
Themes built for portrait screens look wrong in landscape view. Easy solution: build a theme that works in landscape view. The Guava Bubbles theme works fine in both because the background image is larger than portrait size.
TazMan1688 said:
4. My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
I use PPC-Profiles-Pro, but you can't slave this to a time. Besides, I'd rather just put it on Silent mode by holding the connection manager button for three seconds (top left side button). Otherwise I use PPC Profiles to switch from Work (BT) to Home (Wifi, no BT) to Sleep (No Wifi, no BT, no email alerts or reminders, just ringer). Walking into a theater, I just go to silent mode.
bilbo_28 said:
Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Click to expand...
Click to collapse
I know. I'm using MagicButton. And OmapClock with SmartSKey. And FreeUp RAM. In deed, I do almost EVERYTHING to make my device run faster.
Has anyone noticed any long term disadvantages to overclocking the Wizard? Does the battery life permanently decrease? What speeds are you running yours at, and how long have you been doing it? Have you noticed anything at all which indicates it's not good for the hardware?
Cheers
reply
i believe that it's safe to overclock the mda...just set it at an acceptable rate (264mhz for me) and make sure not to run the battery all the way down...if you overclock the settings too high the device will freeze and reset (this is a fail safe procedure it goes through), so there is no need to worry...also don't overclock the settings too low as the phone becomes disfunctional when too low (about less than 132mhz for me)...the screen flickers because it's not being refreshed quick enough (my guess)...hope this helps...
I would set it to 240. I have done before, i'm just wondering if it's a bad idea leaving it permanently set to that level?
Cheers
yea you should be fine at that speed, but if you want you can overclock it higher if it will let you...just make sure that the phone is stable when using it...like i said in my earlier post my device is oc at 264mhz
Cool, thanks for your replies. How long have you had yours overclocked for? Do you use Smartskey?
Cheers
My self i ownly use it when need the extra speed, only with some games and wmv video files. I think it definitely lowers battery life and i would have worries about overclocking all the time and the long term effect it has on the processor (not so important if you only keep your wizard for a year and then change with a new contract - what i do new device once a year!) I found good speed gains with the registry wizard - http://forum.xda-developers.com/viewtopic.php?t=39725
have not found overclocking produces that much extra speed.
My self i only use it when need the extra speed, only with some games and wmv video files. I think it definitely lowers battery life and i would have worries about overclocking all the time and the long term effect it has on the processor (not so important if you only keep your wizard for a year and then change with a new contract - what i do new device once a year!) I found good speed gains with the registry wizard - http://forum.xda-developers.com/viewtopic.php?t=39725
have not found overclocking produces that much extra speed.
Mine is also set at 264 24/7. Battery still lasts me all day. Been doing it since the oc program was found which I guess has been a couple of months.
Don't forget, you're wizard is only overclocked when it is active (i.e. not in standby mode). When your wizard goes into standby, it automatically goes back to the default 180mhz. Only when you bring it out of standby does it overclock again (assuming you're running it with smartskey with the option of overclocking on wakeup)
i'm using smartkey to constantly run at 264mhz...i have been doing this for a month now...like i said there is not really any problems with the batt unless you run it down totally...there was a post about this in the overclocking thread...the process is set low so that the phone will have a longer batt life...this was also stated in the overclocking thread...theoretically there is more wear if you overclock it since you are making the processor work harder, so use it at your own risk! if you want to be on the safe side then use smartkey and the overclocking prog in the same directory...then use total commander's note pad (while the ini file is highlighted) and change the value lower when you don't want it to constantly run at 264mhz or whatever speed you want to overclock or underclock at...just use it when needed, but i overclock mine constant 264mhz with great results combined with tweaks2k2, registry wizard, and of course the tmobile custom rom ...internet is a blast...just wish i could get it to run like the IE in a pc
anyways hope this helps out a bit further...
activesync
your activesync will hang allot if you overclock, I have noticed this.
DOnt know why.
For some reason i stumbled onto something, im sure its been mentioned b4 but when running Wisbar advance with a Windows vista skin done by xcillion, i am able to overclock my cingular 8125 to 288mhz at a stable rate with no problems at all, can run warcraft 2 full speed with over 50 units battling it out on screen, almost doubles browsing speed and i can run all the emulators including SNES at full speed with sound. when i dont have wisbar advance running i cant go past 240mhz clocking speed. I wonder has anyone else noticed this or gone higher than 288 without a freeze. Also, my battery life runs steady for a full day of browsing the internet talking on mobile messanger and listening to music at half volume for a full day.
Re: DOnt know why.
xSoNiCcRaCkErSx said:
For some reason i stumbled onto something, im sure its been mentioned b4 but when running Wisbar advance with a Windows vista skin done by xcillion, i am able to overclock my cingular 8125 to 288mhz at a stable rate with no problems at all, can run warcraft 2 full speed with over 50 units battling it out on screen, almost doubles browsing speed and i can run all the emulators including SNES at full speed with sound. when i dont have wisbar advance running i cant go past 240mhz clocking speed. I wonder has anyone else noticed this or gone higher than 288 without a freeze. Also, my battery life runs steady for a full day of browsing the internet talking on mobile messanger and listening to music at half volume for a full day.
Click to expand...
Click to collapse
hey sonic, where did you get your copy of warcraft 2 for windows mobile ?
I've never heard of warcraft for Windows mobile, how does it run on a 240 MHz overclock?
I got it from the Wargus engine. i can email you the files if need be, i dont want to jeprodize this sites reputation. The game last time i checked was free though...
Actually I'm not sure if it's the overclocking issue or not but ...
For couple of weeks now my Wizard's red led is on all the time, not like it is when your battery is very low but about half of this brightness. I'm not really worried about that, it doesn't change much but it may be connected with overclocking (it was 240 for about a month).
Another thing - once I had sth like 110% speed of every tone played, either a phone call or an incoming message.
It doesn't really matter to me since it's still working fine but it may mean that overclocking isn't that safe as we might think.
TroLoo
PocketHack Master V4 is now out with Tytn support. Be warned that at it's highest setting of 440mhz i had to HARD reset my device.... Must start at a lower speed next time and work my way up!
I'm still in the middle of restoring!!
johnk1973 said:
PocketHack Master V4 is now out with Tytn support. Be warned that at it's highest setting of 440mhz i had to HARD reset my device.... Must start at a lower speed next time and work my way up!
I'm still in the middle of restoring!!
Click to expand...
Click to collapse
have you found a need to overclock the device then...., might works fine for what I use it for
Thanks for pointing this out... I updated the FAQs on the wiki.
It automatically scales the processor voltage onSamsung S3C2440 processors
so does this clock it over 440mhz, because an extra 40mhz doesnt really sound worthy of paying for software, especially when the TyTN is pretty snappy?
So... do you need to stick it in a fridge or anything afterwards?
I think the main idea of using the program is to allow a "super battery saving" mode, by underclocking the device it will use less power....obviously impacting performance-wise but still!
The main reason I wanted PHM was to help render web pages faster. My tytn downloads quicker than the works PC on normal broadband but the pages take longer to 'finalize' the page (i.e.. you can scroll down a page and it's still inserting images). This is a CPU speed issue.
I have finally got to play with PHM and it still needs more work! Just doing a test at tytn's default 400Mhz crashes my phone, never mind higher! I never got much higher than 300Mhz, how strange!!
Hack Master V4 not ready for primetime!
As others have noted, don't waste your time on Hack Master v4. I played with it, only to find it causes crashes, no matter what you do. Also, I found that it caused an incomplete Hard Reset. So, I had to do the manual hard reset twice, to get TYTN working again correctly.
Also, the Wiki should be updated to show there are still problems for anyone wanting to OC the TYTN.
I stupidly tried PHM too, and have just suffered a partial hard reset. Here goes the long and frustrating reinstall...
grayhaze said:
I stupidly tried PHM too, and have just suffered a partial hard reset. Here goes the long and frustrating reinstall...
Click to expand...
Click to collapse
aren't we allowed to take these people to court? False advertising and damaging my equipment? They must have had enough emails by now and yet the same program is still there advertising the same things, very poor...
We should probably change the title of this thread to say "OVERCLOCKING: DON'T EVEN THINK ABOUT IT..." :idea:
johnk1973 said:
aren't we allowed to take these people to court? False advertising and damaging my equipment? They must have had enough emails by now and yet the same program is still there advertising the same things, very poor...
Click to expand...
Click to collapse
They can get away with it through the fact that they tell you to backup your device before you use the program. Coming from an XDAII where PHM worked perfectly though, I stupidly assumed that the quality of the product would be at least the same or even better after numerous updates.
I'm pretty much set up again now, but I'll certainly be looking at purchasing a backup solution before I put my trust in something like that again.
Don't think about it, even with a backup... While trying to overclock my TyTN smoothly, it's now on the way to service (no more booting at all...)
Gx
Oops ... you should have read this thread before even trying overcloking ...
sorry for ya mate !!!
I find my Jasjam (Hermes) runs very fast and I don't see the point in over clocking it when it runs fast enough normally.
Have XCPU Scaler, in autoscale mode working up to 500mhz, on a cingular 8525 (HERM100), no resets, no problem.
>Edit
Also scaled down to 200mhz on the low side for super battery saver.
?Glitch
?Glitch that is amazing not just the speed but the fact that their is no problems!!!!!!!!
?Glitch said:
Have XCPU Scaler, in autoscale mode working up to 500mhz, on a cingular 8525 (HERM100), no resets, no problem.
>Edit
Also scaled down to 200mhz on the low side for super battery saver.
?Glitch
Click to expand...
Click to collapse
you'll be needing one of those new spangly batteries with extra life to cope with a processor increase like that.
@?Glitch: Can you post some screenshots?
That's awesome .. Has anyone else tried this program out? How's it working for you?
I'm using the XCPUScalar with its CPU load based setting.
Normally I set the speed to only 200MHz while on heavy load it speed-up back to 400MHz and 500NHz on very high load.
On day-to-day use it looks like extending the battery life (working on lower clock rate) whiles much quicker route calculation when using the navigation program.
Currently I faced now problem.
Hey guys,
I thought there was no other program like it. That's why I settled on keeping Omapclock consule to boost my wizard to 240mhz.
But now I'm fed up of having to reset it at 240mhz. For some reason, without any explanation the "clock" goes back to it's original speed (180mhz) several times in a day, probably everytime I restart the phone or when I access the net, wifi or any other program...
Do you guys know how to keep the setting at 240mhz permanently??? Is there possibly another program out there for the wizard that could do the job right?
Please let me know.
Phil
try battery status. link in tnt's add on's thread.
Also look for Smartskey, it's got a built-in switch for keeping omapclock turned on, and has pretty nice function itself, too, by making keys have dual function by doing press-and-hold, instead of just clicking for one action only...
what is the highest that the wing can be overclocked and what would be the best program to do so?
rastlin said:
what is the highest that the wing can be overclocked and what would be the best program to do so?
Click to expand...
Click to collapse
You are prob going to be slammed with 'use the search feature', but, I'm bored as hell at work, so I thought I'd help.
You will find many people use different speeds, and different programs. The two I've used are batterystatus and Omap. Personally, I like batterystatus, and I've safely clocked mine to 299mhz.
BatteryStatus? Isn't that way old?
I highly recommend HomeScreen Plus Plus (which is the new version of Battery Status) just google it and you'll find it and download the Advanced verson not the Basic one.
And I safely overclock it to 299 with no problems. I went to 312 once but every so often the phone would rest itself.
HS++ is also good cause it auto underclocks and auto overclocks your device so when your phone is sleeping it saves battery .
buru898 said:
BatteryStatus? Isn't that way old?
I highly recommend HomeScreen Plus Plus (which is the new version of Battery Status) just google it and you'll find it and download the Advanced verson not the Basic one.
And I safely overclock it to 299 with no problems. I went to 312 once but every so often the phone would rest itself.
HS++ is also good cause it auto underclocks and auto overclocks your device so when your phone is sleeping it saves battery .
Click to expand...
Click to collapse
+1000000 this is awesome man! thanks
i want to thank everyone that had responded i did a little research and i was confused. ya see i am using batterystatus .04 and if i go above 260 my phone freezes and to be quite frank i had 2 wizards that i believe died from overclocking. they both one day randomly after a reset went to the bootloader screen and stayed. i had tried a hard reset and flashing the unit with no luck personally i dont have a clue what happened and with this one being my only source of 'net access i cannot mess it over once again thank everyone whom responded
-rastlin
Hmm wow I'm sorry for your Wizard but the Wings can go up to 299mhz without dying and the good thing about HS++ is that if you enable CPU Scaler and set the overclock to say... like 400 and your phone freezes, just plug in your charger and reset your phone. The CPU Scaler is disabled as long as you have a power cord plugged in your phone (your phone stays on it's native speed) so you can just go back into the CPU Scaler overclock settings and lower it and try again ^_^!!
So just use the CPU Scaler to find the highest overclock speed but never just set the overclock speed in the normal overclock menu. Use the CPU Scaler auto overclock option and you won't need to hard reset your phone.
thanks for the advice. so it is possible to kill a unit with overclocking i just wanted to be sure, cause when i asked in the wizard forms if i am not mistaken no one answered me. i had also asked hct via a number provided to me by tmobile and they said the stock "i dunno we will have to look at the unit and that will be $180" towhich i responded f**k!! that i can get a new unit for under 130 off of ebay then got a wing....
-rastlin