I recently bought a german QTEK S200 and upgraded to latest Dopod ROM that is available in ftp.
I used lokiwiz and awizard tools to return to an older JAMin ROM that did not work as you very well expect.
Than I realized that I am unable to hardreset or put the jamin in bootloader mode. I am sure that before ROM upgrading I was able to do so; but I am not sure when the problem started. I mean whether it happened before using above tools or not. I am able to upgrade with dopod ROM one after another that makes the device enter bootloader and hard reset afterwards but manually I can not.
The cam and conn man buttons and soft reset all work alone but not in combination. I tried to wait for 5 to 10 sec before I take the stylus out of the hole but nothing changed. Aso the exe file enterbootloader is under windows and when I click it the device enter bootloader. Any comments?
Also is there a chance to have a QTEK German ROM with AKU 1. If so I will try the assumed but not proven method to downgrade to a lower ROM with prophet (which worked with wizard with a custom ROM).
Cheers.
After flashing the same Dopod ROM one after another the device started to enter bootloader :shock: and after a few more flashing the device can be hard reset as well. 8) No need to tell that I very happy
Bootloader mode in PROFHET (JAMin,S200 etc)
Hi ppl.
I suggest you to use cradle with 5V (1A) original charger or give 5V voltage to device externally.
By the way: to get prophet in Bootloader mode u need to hold continuously Cam and Power buttons.But u should do this with 5V (1A) voltage.
Thats all.
Neither with USB cable nor with the external supply the device does not enter bootloader mode by your method.
Also known method (cam button + reset) does not work with external supply as well.
Unable To Hardrst And Put In Bootloader The Prophet
Im not sure if this helps anyway i assume you can get to the OS executing EnterBootloader from an SD card or device memory did take me to the tricolour screen. on an SPV M600
hello,
yesterday I changed different wm6 roms - everything went well
then I decided to upgrade radio to 2.19 - and after reboot I lost radio info line(before OS version)
now I cannot connect with usb, phone can not be switched on (don't ask for pin at startup)
is there any method to put new rom via mini-SD card? this is the only source of connection I've got
any help would be appreciated
ps my spv is very old, 12.2005 or sth, model 1.03
ok, problem resolved after few tries to connect via usb
thx
help me to break & solve this problem, maybe can also help the other members..
I tried to upgrade my XDA to WM2003SE everything goes right,
bootloader first time i still use v5.22
but when I soft reboot it freezes on the OZUP screen and
message ONLY FOR MICROSOFT bla bla bla....
i get this ROM from http://www.romkitchen.de/ ==> WM2003SE
then downgrade bootloader from v5.22 to v5.15,
using MMC (flash SD) continue to special rom 1.2,
and then cooked again using PC2002 by my own creation based from
romkitchen, what i want to ask is :
i cannot connect again via dekstop activesyn if i want to change
my ROM because my cradle cannot detect my charger?? but if i charge
directly, its work. What is the problem?
is my cradle/dekstop broken at the charger socket?
so what i need to do? just change the wire or socket or
i use the step like at http://wiki.xda-developers.com/index.php?pagename=WallabyCradleMod
if i prefer use the 2nd method, is that really OK? so just used cradle/deskstop, no need
power charger again if i want to change ROM to WM2003SE, because only can use via activesync?
after i change bootloader to v5.15, keep trying to change but only can via Flash SD Card,
i change to WM 2003 final, still same problem....after finish, only screen cannot enter the
menu or else, only boot screen until i am waiting for 15 minutes??? then change again to
WM2003 but using from http://www.romkitchen.de/tools, still same again....boot screen again...
haiyaaaa.....what happen?? i dont know, tired, always overtime to do this,hehehhee...
all my friends, help me...need your advice ^_^V
*now, i still used ROM from PC 2002,cooked again using PC2002 by my own creation based from romkitchen.
bootloader v5.15
Microsoft Pocket PC --> PC2002
Version 3.0.12039 (Build 11178)
ROM version : 3.17.03 ENG
ROM date : 05/15/03
Radio version : 6.24.00
Protocol version : 324e4
Model No.: PW10A1
I can not really help you, but i was also in the same situation, that i have had a device, that doesn´t work with any other ROM than PPC2002
Flashed several WM2003 ans the WM2003SE but non of them worked.
So i rest at PPC2002
Stefan
ow ow...
auch.. ok, thanks for the comment, i give-up,hehehe..but only for now,
take a rest first but i dont know for t'mrow, actually from 10 flashed,
i got 1 success, can got WM2003SE but with almost empty battery,
i know the inside and already set all, including i notice bluetooth icon,hehehe..
but how? i wonder that my sx56 with fake bluetooth, only icon
but after i charge my sx56 then i soft reset, its gone, back again with only boot-screen, after that, i can't find again WM2003SE ROM only lock with boot-screen, and ONLY FOR MICROSOFT..blablabla...
and about for my cradle/dekstop? how is it? can u give me solution to fixed it??
btw,thanks for helping, tips & trick hehehe...
i will keep trying to find/solved this problem by my own way ^_^V
modify my cradle/dekstop success
its working, i try to modify my cradle/dekstop with that steps (look at the top this thread), and it's work...actually not me who did it, but my friend,hehehehe....i ask his help and he agrre to doit, but all the risk is still at me, now i can charge and also syncronized to my notebook
i want to flash my phone as its got the problem when its connected to the pc via usb it does not recognise and comes up unknown device i have tried everything people have sugested
now i dont want to flash my phone without using the spl program first is there anyway this can be run from the device???
Do you have activesync installed?
Are you using xp?
yes and yes
its a hardware fault with my orbit
im hoping its just the wm6 fault hench i want to flash it with a rom
I have just bought a singapore Sim locked handset .. I need to Flash a english rom and unlock it .. i have downloaded the rom the Hard spl but before that i was trying to update using SEUS but it went to the bootloader mode and itdetected the drivers then suddenly says one of the usb is malfunctioned and cannot reconize the device now i have tried 3 systems but nogo...i need help to get hardspl installed without using the usb port and a computer and then i can flash a eng rom on it using msd card.. and i have tried hard reset/chking in bootloader mode/and active sync also not working
have you try this?
Program --- Setting -- Connection ---USB to PC
clear ..... Enable advanced network funcionality
(Clear this check box if Activesync does not recognize the device)
goodluck
Or flash it with a generic ROM using the microsd method.
EDIT: Never mind. Read the first post too quick.
Thanks a lot .. it worked .....i unchecked it and it worked i have a english version of it now ..now one more problem left is simlock any solutions for that???? thnks a lot for helping me appreciated