Hi,
I've search and spend many hours trying to unbrick this thing and wasn't able to unbrick this.
Some info on the machine, it's a I-mate JAMin phone.
IPL 1.00
SPL 2.15.0000
GSM 02.19.21
OS 2.15.13.24
The problem is it will not get past this screen, and sometimes it will and stay stuck at the white HTC screen.
Then about 50% of the time, the GSM 02.19.21 doesn't come up at all.
I am able to go into the bootloader and connect it to my computer and it does show USB. But then I am unable to run most of the commands because I do not have the correct password. Even tried running the different ROM update files and got error [260] or something similar.
I recently obtained a ROM which has these files OS.nba, Splash.nba, HTCLogo.nba, Radio.nba, and boo.rgu. How can I use these to flash my phone with the SD card?
Another problem is, it seems like something is loose inside the phone where I cannot start the phone someimes unless I shake it up down left right.
What can I do now other than throwing the phone away.
Thank You very much.
Have you overclock your device?
I've the same situation before, but finally i've down the clock frequency and it get back normal.
Related
Hi,
I tried a new rom and now am stuck at the bootloader with no OS on the phone.
ipl 2.10.0001
spl 2.10.0001
gsm 02.69.21
os 4.0.0.0
I have searched all the forums and still cannot get my spvm600 to do anything. I have tried to run several roms but the problem is they cant see the phone as activesync wont connect. is there a way i can boot from the sdcard or somthing or do i have a expensive paperweight. when i try to hold down the camera and comms keys on start it asks me to format the device and then says doen and goes back to the above screen
anyone?
ideas?
Try to restart your device and deliberatly go to boot loader (keep camera button in) (keep usb disconnected).
once at boot loader screen connect usb cable ... you should now see "usb" in bottom left corner on device screen.
now run a wm5 rom like in step 1 of "how to upgrade from WM5 to WM6" thread - - http://forum.xda-developers.com/showthread.php?t=310452.
it worked for me!
every rom i try to install on it needs activesync to connect to it but activesync douesnt connect to it as the phone has been formatted. there must be a way to fix it but but i am totally stuck
Rom Upgrade doesnt need Active Sync, you just need to be in bootloader and have the usb cable connected. Then just go through the update utility.
I try that and it still seems to say no device connected would you like to try copying again. I cant understand it cause it makes that bling noise when i plug it in
Use Update_NOID
You must use the No_ID Updater to upload a ROM from the 3 colour screen. Just run this exe file and you should not have any problems.
Hi,
Please help, I too have the same problem. Installed all the versions but no use. Can any one help me how to downgrade to Original German ROM version for Neo. So that I can return to O2 company... otherwise this become expensive paper weight
thankyouthankyouthankyou
YEEAAAAHHH
my phone is now working.
the no id rom worked a treat.
xtrafletch thanks a million!!
I have a Dopod 818pro that was flashed with the wrong ROM and now all I get to is the DOPOD splash screen. I can get to the TRI color screen by pushing the camera and power button.
I have tried hard reset but seems the OS is missing from the phone.
I have the original ROM for my phone on my PC but can not use active sync as the phone does not go further than the SPLASH screen.
How can I reload my original ROM using the SD card.
Any help would be appreciated.
Thanks
Canada59
use the tricolor screen even though active sync doesnt see it it still flashes but u need to use the flash upgrade wizard and not the cli interface one
Worked for me but i cant sae it will work 100%
Where do I find the flash upgrade wizard?
When I plug usb in, i get usb on the white band in the color screen
Tried to run the update using RUU and get ERROR 260
Thanks for your help in this
Yeah RUU same thing i was meaning that one cause theres another that uses cli but its a bit dodgy
RUU Wizard should work it never detected ma G4 but it flashed it anyway i was well chuffed cause i thought i had bricked it
I just tryed the app without the phone connected and it gave me error 260 so maybe try different cable or pc cause i had a issue with xp not detecting my phone and i had to reinstall xp just to get active sync to work properly
The main problem is that I had a bad flash, now I can not get pass bootloader screen, PC does not see device, active sync says not connected. there must be a method for loading the NK.ntf file from sd
Not came across anything like that as the SD card driver would be loaded at boot with the OS and in your case theres no OS booting it would be hard to sae it can be done but i bet someone will prove me wrong lol
Good Luck mate ill keep an eye out for anything like that though
Thanks for the help....phone is useless at the moment......
Hey guys,
I have two WINgs and I Hard SPLed one already and I Flash it regularly
the other one was at the T-mobile Rom and stable till it starting restarting at every call.
So i treid to Unlock it also like the other one
So I backed up all my contacts and Messeges with PimBackup
and after i Installed the three files
security removal, Aserg and cannonyang
when I try to Hard SPL through RUU with USB so it tells me no connection although its connected in Activsync
I searched the forums and Bypassed the Connection issue by entering the Boot loader through the phone and it got to 2 percent and told me i need a newer RUU although it is the Same as the other Wing for the versions and I have done the other one Fine
when I tried to do it again and still bypassed into the boot loader through the phone it now tells me that There is no Connection to the device. Although the USB sign is available in the bottom.
Now I have Also searched the forums and found Aserg suggesting that we install the Native T-mobile Rom
It connected fine and went into
1% of updating Image and then it gave me a communication Error
Now I noticed two things:
1. it Goes into Bootloader and CHills there
2. It Changed the IPL number from 4.26.0000 to 4.10.0000
but SPL remained 4.26.0002
Does any one have a Solution for this Problem Guys?
Is it bricked now and I just can't see it?
Please help because all my contacts are are on it and i am working with crappy nokia instead of it that has none of them.
Hey guys,
I have two WINgs and I Hard SPLed one already and I Flash it regularly
the other one was at the T-mobile Rom and stable till it starting restarting at every call.
So i treid to Unlock it also like the other one
So I backed up all my contacts and Messeges with PimBackup
and after i Installed the three files
security removal, Aserg and cannonyang
when I try to Hard SPL through RUU with USB so it tells me no connection although its connected in Activsync
I searched the forums and Bypassed the Connection issue by entering the Boot loader through the phone and it got to 2 percent and told me i need a newer RUU although it is the Same as the other Wing for the versions and I have done the other one Fine
when I tried to do it again and still bypassed into the boot loader through the phone it now tells me that There is no Connection to the device. Although the USB sign is available in the bottom.
Now I have Also searched the forums and found Aserg suggesting that we install the Native T-mobile Rom
It connected fine and went into
1% of updating Image and then it gave me a communication Error
Now I noticed two things:
1. it Goes into Bootloader and CHills there
2. It Changed the IPL number from 4.26.0000 to 4.10.0000
but SPL remained 4.26.0002
Does any one have a Solution for this Problem Guys?
Is it bricked now and I just can't see it?
Please help because all my contacts are are on it and i am working with crappy nokia instead of it that has none of them.
My heads spinning from all the information aka post and threads, but im still stuck like my wizard on the 2nd splash screen.
I wasnt trying to upgrade the rom jst clear storage but after everything ive read i would like to upgrade to wm6 but first i want to get my wizard working.
I tried backing up the rom to the sd card but I get "You didn't get the proper security level to download a specific image" So i take it my wizard is cid locked.
My IPL:1.01 and SPL:1.06 does that mean its a g3. My activesync 4.5 doesnt pick up my wizard is it because it cant boot, i tried with it in bootloader mode still doesnt pick it up.
So plz point me in the right direction to fix my wizard
ok i think the place where im stuck at is cid unlocking my wizard with out using that imei site. any help or is there another way to do this.
This helped me when I was stuck on the first screen. For some reason, the Radio file was gone. Follow this exactly, it works. In my case (sounds like yours also), at the end of this you will at least have access to the phone again.
http://forum.xda-developers.com/showthread.php?t=276963&highlight=bootloader
After your done. You will have a RGB screen, then follow these directions to load a base rom and unlock so you can keep going until you ca load WM6.1.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
I've had many, many problems over the last 3 days trying to do this. I completed it all in less than a day, but when I used the phone it had terrible reception. I completely downgraded everything back to square one. Still bad phone reception. I was about to through it out the window, when someone called my wife's cell phone and she also had bad reception. I then put my sim in another phone, same problem. Well, at&t has a tower down for the last 3 days. What timing, it seems to work when not at home, but hard to test that way Anyway, moral of the story is. Don't give up, keep plugging along.
Good luck.
I'm pretty sure imei checker is for SIM unlocking.
For G3 CID unlocking and upgrading read the stickies in http://forum.xda-developers.com/forumdisplay.php?f=289
If you can start your Wizard in bootloader, and it says "usb" in the lower-left, you can flash your original ROM. An active sync connection is not needed. Search for your carrier's ROM if you don't have it and I'd recommend the "no carrier ID" version of the RUU.
Have you tried a 'Hard Reset',hope it'll work,if it boots up into working OS and it already has IPL/SPL 1.xx,use lokiwiz02b tool to SIM/CID unlock the phone and than upgrade.
If it doesn't work still after Hard Reset,most probably,its Extended_Rom is corrupted,its required to reflash a new rom.
Activesync doesn't work in absence of a working OS and in Bootloaders mode.Its not required for flashing a rom.Just get the phone into Bootloaders and hook the phone with pc via usb cable and watch small usb appear at the bottom of the bootloader screen,if its there,it good to go and flash the rom.
ok so i downloaded the button rom finally but how do i flash it to my wizard.
Get your phone in Bootloaders,hook up the phone with pc via usb,watch small usb appear at the bottom of the Bootloader screen,if its there run the 'RUU' application,it'll start to flash,it stops at a certain percentage,don't get worried and do anything,after a couple of minutes it starts again,let it complete 100%,the phone'll restart and boot up in new OS.
which ruu application. I jst downloaded 1 which comes in the form of a rar file saying ruuwrapper. is that the right 1
So after lots and lots and lots more reading i realized i dont need a ruu. all i need to do is get into bootloader mode plug in the usb and run the wizard button rom. It worked perfectly my wizard is back to life yip pee.
Anyway i wud jst like to thank u guys for all the help and compliment u guys on a gr8 forum.
Now my next challenge is wm6 with touch flo.