Hi,
I experienced some problems wih my HTC Tytn (R 1.03.03.10).
At home I use a wifi connection with WEP 128 bits authentication.
The wifi connection procedure goes ok every time (with regular Ip adderess assigned).
After connection I can normally surf with IE (or use other other applications as MSN) but only for few seconds. In fact after few second it is not possible to surf anymore although it seems to be connected to wifi AP with regular IP address assigned (the icon and the specific menu say me that). After other few seconds It is possible to surf again, and so on..... The connection seems to drop and raise randomly.
I tried to modify some settings (eg. Power save mode) but with any result.
Thank you in advance to anyone could help me to solve this problem.
M.
marmao12 said:
Hi,
I experienced some problems wih my HTC Tytn (R 1.03.03.10).
At home I use a wifi connection with WEP 128 bits authentication.
The wifi connection procedure goes ok every time (with regular Ip adderess assigned).
After connection I can normally surf with IE (or use other other applications as MSN) but only for few seconds. In fact after few second it is not possible to surf anymore although it seems to be connected to wifi AP with regular IP address assigned (the icon and the specific menu say me that). After other few seconds It is possible to surf again, and so on..... The connection seems to drop and raise randomly.
I tried to modify some settings (eg. Power save mode) but with any result.
Thank you in advance to anyone could help me to solve this problem.
M.
Click to expand...
Click to collapse
Couple of routine things you may already have done/tried/checked:
Try best performance setting in the "power mode" in Connections>wireless LAN.
And the range of the wifi is only around 10 to 15 metres are you within this without large obstructions?
Could also set a fixed IP address.
Mike
Thank you Mike,
I've already tried to set power performance to "power mode" and I performed my test near the (2-3 meters) without any obstructions.
Later I'll try to configure a static IP address and/or to deactivate WEP authentication. I could try a mac address based access too, instead of WEP.
I'll inform you later !!!!
M.
marmao12 said:
Thank you Mike,
I've already tried to set power performance to "power mode" and I performed my test near the (2-3 meters) without any obstructions.
Later I'll try to configure a static IP address and/or to deactivate WEP authentication. I could try a mac address based access too, instead of WEP.
I'll inform you later !!!!
M.
Click to expand...
Click to collapse
Ok - can't see problem with WEP though - I use that with 128 encryption without problems.
Mike
I'm facing the exact same problems with my home network.
Connection up and down.
At office network never faced such a behavior.
Since I realize I'm not alone with this problem I'll try to investigate it more.
I've had the same problems at both my home and office. I use WPA-PSK w/ TKIP for security on both devices, though each of the access points are of different manufacturers (home is a Linksys, office is a Cisco 1231). Both routers run compatibility modes for 802.11b backwards compatibility and thats the only thing I can think of that is common to both. My WiFi connection usually associates with the AP but always ends up with a 169.254.x.x IP and the only thing HTC has been able to tell me is that the 8525 only supports 40 bit encryption (which is blantently wrong if it's even detecting the WPA-PSK). Has anyone come up with a solution or even seen the same problem? If needed I can post logs from the Cisco AP that show what occurs when the 8525 tries to associate.
mantrius said:
I've had the same problems at both my home and office. I use WPA-PSK w/ TKIP for security on both devices, though each of the access points are of different manufacturers (home is a Linksys, office is a Cisco 1231). Both routers run compatibility modes for 802.11b backwards compatibility and thats the only thing I can think of that is common to both. My WiFi connection usually associates with the AP but always ends up with a 169.254.x.x IP and the only thing HTC has been able to tell me is that the 8525 only supports 40 bit encryption (which is blantently wrong if it's even detecting the WPA-PSK). Has anyone come up with a solution or even seen the same problem? If needed I can post logs from the Cisco AP that show what occurs when the 8525 tries to associate.
Click to expand...
Click to collapse
Just out of curiosity, when you say backwards compatibility do you mean the router is capable of "g" rather than "b". If so have you tried "g".
Mike
I m having the same problem. I connect to Wifi, i can surf a couple of pages and then i just cannot browse anymore. I have to turn off wifi and then turn on wifi to continue browsing from where I was at.
Any help on this would be greatly appreciated
mikechannon said:
Just out of curiosity, when you say backwards compatibility do you mean the router is capable of "g" rather than "b". If so have you tried "g".
Mike
Click to expand...
Click to collapse
When I say compatibility it means that the radio on the AP can fall back to "b" speeds if necessary. And no, I haven't switched them to only "g" mode as that should not be necessary if the wifi implementation on the Hermes is up to spec.
Same problem here?
I have a Cisco N router, so does that mean its useless for WIFI for my phone?
I also tried to change the settings to Best Performance but it wont allow me to change them? Any suggestions please anyone would be greatly appreciated please? Must I have only a G router? And whats the SSID in current configurations? Should I enter the Routers IP? And where should
I enter it please?
Related
ISSUE
Every 3 - 5 minutes while browsing, my wifi will "hang" (timeout when trying to access sites). Note: it doesn't disconnect, the wifi icon is still there as if I was connected, it will just timeout any requests.
TEMP FIX
Reconnecting will fix the problem until it occurs in another 3 - 5 minutes.
VERIFICATION
This is not an issue when using my device on my friend's home WIFI connection.
WHAT I'VE TRIED
Updating my Linksys WRT54G Ver. 2.0 router to the latest firmware.
Switching from WEP to WPA (TKIS) encryption.
Trying different wireless frequencies (i.e. different channels)
Manually setting MTU to 1500 for my broadband connection
Resetting router & Modem
Setting a static IP on my phone (only wifi settings I can change on my phone).
COMMENTS
I think switching from WEP to WPA (TKIS) sped up my connection (but didn't fix the hanging). I didn't do enough testing to verify this but I ran 4 speed tests (1 with WEP then 1 with WPA then one with WEP then one with WPA) and in all occasions with WPA (TKIS) encryption my speedtest results were nigh twice as fast as the results when using WEP encryption. Odd...?
This isn't an issue on my laptop when using my WIFI connection, however, that doesn't say much since I likely have a much better receiver in my laptop (an Intel wireless N card) and it's not to say my laptop gets a perfect connection (I can't play Team Fortress 2 on WIFI anymore because of lag spikes - need to play with wired connection), but it just doesn't have this hanging problem.
If anyone has any ideas of other things I could try to get this working I would greatly appreciate it.
Thanks.
Hey,
Iam wondering, after flashing tomal 8.7, I have the same problem as you with my universal. Did you found any solution?
Pieter
pvanbrakel said:
Hey,
Iam wondering, after flashing tomal 8.7, I have the same problem as you with my universal. Did you found any solution?
Pieter
Click to expand...
Click to collapse
Chek on Universal forum, there are some guuys with the same problem
But a hard reset should help
Don´t forget to vote!
KPeriod said:
ISSUE
Every 3 - 5 minutes while browsing, my wifi will "hang" (timeout when trying to access sites). Note: it doesn't disconnect, the wifi icon is still there as if I was connected, it will just timeout any requests.
TEMP FIX
Reconnecting will fix the problem until it occurs in another 3 - 5 minutes.
VERIFICATION
This is not an issue when using my device on my friend's home WIFI connection.
WHAT I'VE TRIED
Updating my Linksys WRT54G Ver. 2.0 router to the latest firmware.
Switching from WEP to WPA (TKIS) encryption.
Trying different wireless frequencies (i.e. different channels)
Manually setting MTU to 1500 for my broadband connection
Resetting router & Modem
Setting a static IP on my phone (only wifi settings I can change on my phone).
COMMENTS
I think switching from WEP to WPA (TKIS) sped up my connection (but didn't fix the hanging). I didn't do enough testing to verify this but I ran 4 speed tests (1 with WEP then 1 with WPA then one with WEP then one with WPA) and in all occasions with WPA (TKIS) encryption my speedtest results were nigh twice as fast as the results when using WEP encryption. Odd...?
This isn't an issue on my laptop when using my WIFI connection, however, that doesn't say much since I likely have a much better receiver in my laptop (an Intel wireless N card) and it's not to say my laptop gets a perfect connection (I can't play Team Fortress 2 on WIFI anymore because of lag spikes - need to play with wired connection), but it just doesn't have this hanging problem.
If anyone has any ideas of other things I could try to get this working I would greatly appreciate it.
Thanks.
Click to expand...
Click to collapse
have you solved the problem?
i have the same same issue with modem-router wifi Sitecom wl
Every 3 - 5 minutes while browsing, my wifi will "hang"
it doesn't disconnect, the wifi icon is still there as if I was connected,
if you had solved can you tell me how fix it?
Bye
Hi,
It looks that I've got the same issue as you have - the connection is still active (at least, the icon shows that), but after a couple of minutes, I cannot access any website.
Did you guys find any solution to this problem?
thank you very much
Ive had that problem with a few routers(i know the answers late, but maybe it will help someone at least). I had to disable the routers firewall. Once that was done, no disconnects. Weird.
I have a ZyXEL P-2602HW-D1A Wireless router. I have tried all combinations of security, even NO SECURITY WHATSOEVER, and still the device won't transfer data.
Not working;
Firmware: 1.5, Build: CR817
Wifi Router: ZyXEL P-2602HW-D1A
Security: Tried All; WPA2, WPA, WEP & None.
Problem: Connect under all conditions but no data is sent
Please help.
Have you tried another WiFi access point to check the devices WiFi module actually functions?
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
jbelman said:
Have you tried another WiFi access point to check the devices WiFi module actually functions?
Click to expand...
Click to collapse
For some reason my N800 wouldn't connect to MY ZyXEL P-2602HW-D1A unless I set the device (N800) to disable any kind of wifi powersaving features it had.
On another note, how did you get your hands on the device so early? I'm guessing you are using a Cybercity internet connection? (I'm in copenhagen myself)
edit: I actually came to that solution when i noticed I could connect to OTHER accespoints, but not the Zyxel ones.
Same problem here in France with a Freebox as router
I've noticed under the router's WLAN client list that the device does not have a "Host Name". Would that present a problem?
It is assigned an IP address by the router without any problems, though.
Also the device seems to lose connection and reconnect constantly (every 5-10 seconds).
I done some digging around in the router settings and found an "AnyIP" feature. Would that possibly help?
There are a number of issues floating around. Support for WPA2 seems iffy and some people can just change to WPA or WEP and all work fine.
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
I have seen no solution to this anywhere and believe me I have looked. Some people have given up and got a new router, but this is not a solution.
Can someone confirm that this has been recognised as a fault with the magic and is being investigated, rather then assuming it's a user or router error. There are far too many instances of this across many brands of router for it not to be an issue with the HTC Magic.
zyborg said:
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
Click to expand...
Click to collapse
What I mean is have you tested the device on ANY other AP except the ZyXEL?
No, but since I'm by far the only one having this issue (try searching the web; see my last post), I didn't feel it was necessary. Just want some input from xda-dev that might solve the problem, if any.
jbelman said:
What I mean is have you tested the device on ANY other AP except the ZyXEL?
Click to expand...
Click to collapse
I've had exactly the same problem earlier with the N800 on the zyxel. Exactly how you describe it.
Did you find out if you could turn off any powersaving features on the HTC?
same problem here
in france with a freebox
I don't exaclty know what router is in the box
but I have excalty the same
I set on never the wifi sleep(powersaving) mode.
i found it in setting wifi menu button then advanced and "never"
but the problem is still here
zyborg said:
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
Click to expand...
Click to collapse
I have the exact same problem on mine. I just hope it is not a hardware issue...
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Yes, I tried that also - didn't help one bit.
TheRookie said:
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Click to expand...
Click to collapse
I also have this problem. Im in Denmark with a Zyxel P660HW-p1.
Another user of Cybercity in Denmark with the same problem.
ZyXEL P-660HW-D1
The android is the only device that doesn't work. I have tried with Iphone and laptops.
I've tried to change the settings on the router to no avail.
Enable 802.11g+ mode [on/off]
RTS/CTS Threshold [2432/4096]
RTS/CTS Threshold [2432/4096]
Max. Frame Burst [600/1800]
The device shows up in the device list with no hostname, the HTC Magic gets the right ip address (using the program WhatIsMyIp to view it)
I had the same problem before, when I set my TP-LINK draft N router with WEP security my HD can see it, connect to it (but speed was slow tho), and my HTC Magic just keep saying its not in range. However, when I set it to open security it works, so I recognise its probably the security setting... so I changed that to WPA2 and then it works.
In my case, I see different device have different tolerance to some settings (in my case, draft N + WEP is OK with laptop, HTC HD, but not Magic), so its still worthwhile to try a few different settings, and try a public wireless access point also to double confirm?
Power save?
I have Zyxel (P-2602R-D1A) router.
I had exactly the same problem with my HTC Vox (winmo)... but that was solved by boosting the WiFi in the phone.
WiFi -> Best performance
So Im guessing magic is in some WiFi "power save" mode...
I dont know how this works, but I thought maybe you could change some WiFi settings behind the hood - that is if the hardware is capable of it.
Zyxel (P-2602R-D1A) router
I am having the same issue with this router as the other posters. The phone connects perfectly and reports an excellent signal, but barely sends or receives any data. I have used a terminal emulator to ping the router and it reports an 82% packet loss. This must be a big problem for many Danish users as it is the standard wifi router provided by two of the major ISP's.
same issue here with my vodafone uk magic.
wifi connects and i can browse for a few seconds then get a connection error and can't browse until i re-start wifi on the magic...
i've actually given up using wifi at home now due to this.
router is a talktalk supplied Huawei Echolife HG520b using 128 bit WEP
i can connect fine via wifi at the office so i don't think it's an issue with the handset, just with certain routers or router configs...
this issue has been reported on the vodafone uk forums but as yet no solution.
http://forum.vodafone.co.uk/index.php?showtopic=31937
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
What protocal are you using on your router? WPA, WEP?
Oh if your using an older Belkin router, I know of about 3-4 models that used to have trouble with WinMo, an update Router flash fixes it though.
Give us some more info on your router etc and Im sure we can help though
Sure your using the right password/key? if it says its wrongs it is probably wrong lol. Maybe try changing it to a more basic password as a test? like "password" and see if it can get connect.
knightrider66 said:
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
Click to expand...
Click to collapse
Hi
Calm down. Give some information about your router and the type of security You use.
try these
1. Reset the router once
2. If you use MAc access list on the router then add your device's MAC to the list.
3. If you use N router then in the settings untick N mode protection.
Give more details about the third party software on the hd2 using radios (eg: tomtom, igo,gpstuner like these)
Good luck
HI guys thanks for helping out.
Obvious first - yes the key code is correct i use it on my laptop and iphone.
security mode says WAP-PSK/WPA2-PSK. Its a siemens ive been on the ip server addres and cant see any issues, im on my laptop using the wifi now and its working perfet.
Ive tried everything, changing passwords, settings both on the router and on the phone.
The hd2 is full of really stupid bugs!
Try to hardreset the PPC.
If it won't work, try to update your ROM to the latest available.
If it doesn't want to work, then try to connect to another WiFi without password and see the connection is successful.
If it works with an unprotected WiFi, try to connect to a different router but with protected WiFi.
If it works, then there is a problem with your router and I suggest to update your router's firmware.
funny wifi
the problem wit my hd2 is most of the time it shows wifi connected but i cant surf the internet and sometimes out of the blues it connects to the internet,cant figure out wats happening....
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
knightrider66 said:
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
Click to expand...
Click to collapse
Have you found the solution? I can help you my friend i had the same situation
I tried to connect yesterday my hd2 with my router. First it wasnt working aswell. Then i set the next things. Channel 9 (was auto), Encryption AES (was tkip and AES). Network mode is Mixed. Further have you installed Mac Filter? I installed this also. So if i have a connection thats it. I must fill in my macadres from my phone for i get fully connected.
Hi guys thanks all for you help call HTC UK support and their amazing advice was to do a full hard reset!
I really am having a lot of problems with this phone and i cant understand why their have been so many issues?!
Hi guys,
I have the same problem- HD2 shows it is connected, but no access to Internet(other- laptop, SE990 phone is connected and working OK)
For not to write about all, now situation is:
1. On router wrt54g2 temporary disabled wireless security, only mac filtering is on(laptop mac, SE mac, HD2 mac is allowed), router firmware is up to date
2.HD2 is like new after hard reset, no settings is done for connection to home network. HD2 wifi is on, looking for access points and connecting to only one available open network in my area- to my home network and shows it is connected but no access to Internet.
3. In router I can see all connected clients by mac. All 3(lap, SE, HD2) are connected. I use Network Magic software too but it is showing only my laptop and desktop are connected. SE is not connected according NM, but it is working OK.
P.S.
Do not know what else can help you in my problem(maybe some other router setting, but as other devices are connected without problems so maybe it is not important for now)
So only my HD2 can not access WWW
Can You guys help somehow please
I've got a similar problem with an HD2 over here. Wifi does switch on, but it just won't connect to my router. The cirkel that is supposed to show when connecting to a network doesn't show either. I'm using WPA2-AES security, and yes, i did use the proper network key. I haven't tried connecting to other networks/using an alternative encryption method because a lot of other devices will then have to be reconfigured and it's not my own place. My Touch HD and 2 laptop connect to the network without any problems. The only solution I came across until now is doing a hard reset, which I would rather not do... I'm using a stock dutch rom (V1.43). Is it possible that upgrading to the newer 1.48 will solve this problem?
Have you tried removing the wireless security password and trying again? Test to see if maybe you are indeed typing in the password wrong.
Also check your exception list on your router, it might be blocking any other devices coming in.
I have the same problem.. Get the spinning loading circle and thats it.. But if i turn my belkin wires g router running wpa2 off then straight back on again the phone connects fine. But if i then leave my house or disconnect from the network then try and reconnect it wont and have to do the same process again. Luckily im also running a speedtouch 585 modem router which the phone connects fine to.
hey maybe it takes only a WEP key and not WPA as most people have. this is certainly the case as mentioned in the Wifi router article below -
http://www.mobilityminded.com/5438/wi-fi-router-on-htc-hd2-application-overview
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
allann said:
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
Click to expand...
Click to collapse
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
commando0 said:
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
Click to expand...
Click to collapse
Router "dials" to my isp and share internet for all connected devices...
Yes, i am going to hard resset my router, but have not much hope i sucsess
PROB:
If your HD2 connects to router but you cannot enter any web site, do this:
SOLUTION:
enter your www router settings - wireless - access control - MAC Address Filtering Table ->>>>> add your HD2 MAC adress
enter your www router settings - firewall - access control ->>>>> add your HD2 MAC adress
so, you have to add your MAC adress of HD2 into router TWO TIMES into TWO PLACES!
I had the same problem and..... solved
Hi All,
Just got my new HTC HD2 from Virgin, however I cannot for the life of me seem to connect it to my home WiFi (I've not tried it elsewhere yet).
I've still got my MDA Compact IV here with me and use the same settings as the HD2 and that connects first time no problems, but the HD2 isnt playing ball!
It sees my wireless network at home (full strength) and starts to connect then simply says "Available". No notification of incorrect wireless key etc...reported.
I have used my Compact IV side by side with the HD2 and no issues so I am puzzled as to what I need to do now
Any help would be appreciated.
Thank
Are you sure you didn't set up some MAC address filter in your wireless access point?
kilrah said:
Are you sure you didn't set up some MAC address filter in your wireless access point?
Click to expand...
Click to collapse
I've not enabled MAC address filtering on the router at all, just simple wifi security key access.
Flash a new radio?
(check my sig under hspl flashing guide)
if you are using wep, heres something to try.
routers can be set to three types of wep key
open
open or shared
shared
in my experience if you areset to the middle one, "open or shared" mobile devices can have trouble connecting.try setting it to just "shared"instead.
course it could just be my router but I have seen this behavior in three mobiles including my hd2.
Current router settings is WPA-PSK [TKIP]. I even tried turning off security and got nothing My router is Netgear WGR614v9 - it came with my Virgin broadband deal.
Current ROM version is 1.48.405.2 (71294) WWE and radio version 2.05.51.05.2
Its most annoying that the HD2 on the face of it seems like a really good handset but then I cant get the Wifi connected which most basic handsets have no issues with
Any other possible solutions?
I got the same problem
I have the exact same problem.. Cant connect to my AP with my leo... got no mac secure on, even if i remove my security(WPA/wep or whatever), it will not connect...
I had the same issue when I applied hint 39 from http://forum.xda-developers.com/showthread.php?t=583638
Result: couldn't connect to my network with WPA2.
After restoring the parameters everything is OK.
Right finally got it working!
Installed the Touch_X_Wireless_Draft_N_ON.cab cab and then uninstalled it and now it seems to work.
Cab can be found here: http://forum.xda-developers.com/showthread.php?t=584415
Hope that helps others out too
I had this issue too, could see my home Wifi network, but the device would just say, "Incorrect Network Key". But it was correct!
I now have it working strangely by changing router Security Options to (WPA-PSK + WPA2-PSK)
Connects with no hesitation now!
my advise is disabling WEP password in both HD2 and the router.
it works perfectly.
"Incorrect Network Key" problem
Bro you made my day! I spent whole day to figure out a solution to the exact problem. I wish I had seen your reply before. When I changed my cable modem's setting as suggested and encryption to AES, it worked
Thanks again.
spyralmale said:
I had this issue too, could see my home Wifi network, but the device would just say, "Incorrect Network Key". But it was correct!
I now have it working strangely by changing router Security Options to (WPA-PSK + WPA2-PSK)
Connects with no hesitation now!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=959764
"When you connect to wifi on your phone, open terminal emulator and do a ping to your PC's IP address, or use any ping app (I am using Net Ping from market). As soon as you start to ping your PC, connection is immidiatelly opened. I have no idea why it is like that, but for now I am using this method when I want to use FTP server on HD2...."
My Wifi connected to my home router perfectly until I flashed the custom rom.
Now it wont work. the phone recognizes my network, then tries to connect but it pauses at the obtaining ip address bit and doesn't connect?
I tried to restart the router. It doesn't work.
I tried to reflash the rom or offical rom (KE7). It doesn't work.
I also tried to delete the file /data/misc/dhcp/dhcp_list, but there are no "dhcp_list" file inside 'dhcp'
Do anyone have another way to solve this problem?
Thanks
Could be a problem with the router, are other devices able to acquire IP addresses from it correctly?
Perhaps you should assign a static IP to see if that makes a difference.
I am on KE7 stock rom with root and had this problem too. It just started yesterday and got stuck at obtaining ip adress. So I switched WIFI off and flight mode on and after some seconds wifi on and flight mode off and it connected. I also noticed that now sometimes when it is in standby it disconnects from the wifi network (but wifi is still ON) and when I wake it up it connects to my network.
Me too, same problem.
If wifi is ruled on "sleep when screen turn off", it don't wake when screen turn on.
It stay on " searching for IP adress...".
For the moment, I'm forced to leave wifi on "never" and I use Juice defender for disabling wifi on screen off.
I really think it's a common pb with SGS 2. May be it will be fixed with 2.3.4.
Same problem. I 'fix' it by turning off wifi then turning it back on and it gets an IP address immediately.
same problem here with a dlink dir-615 router. from time to time the phone can't get an ip, and it only works if i reboot the router. didn't try with another router yet ( well, i connected to a few more but not frequent so i can see if there are problems), but i ordered a new one anyways since the dlink also crushes my battery too.
try posting the brand/model of the router you have problems with, maybe there's some specific ones that are troublesome.
d-link dir-615 here / ke7 stock - rooted
I also have a dlink router. But I get the same problem with a Belkin.
With my first SGS, no problem. I really think it's a specific issue on SGS2.
I'd read in some place that 2.3.4 will fix some wifi problem known for the moment on 2.3.3...
Let's see...
I'm seeing this with both my home router (Netgear WNDR3700) and my office router. Disabling & re-enabling WiFi on the SGS2 solves it -- fortunately, it's easily accessible on the notifications panel.
Same thing with Dlink dir 815.
Sent from my GT-I9100 using XDA Premium App
Same thing here with Draytek 2820 router, all other devices (PC's Phones, PDA's etc) have no problem. SGS2 however needs WiFi turning off when waking from sleep to get it to obtain an IP address again. However my HD2 also running Gingerbread 2.3.3 works faultlessly.
KF2 seems, for me and some others, fix the problem...
hi
lucky me, i thought im the only 1 having problem with wifi
my problem, same as the others
the wifi try to connect (obtaining IP) and then disconnected
it will scan again, same thing will happened
try with all type of protocols, wifi b,g,n wep, wpa, no passwd
results still same
try to connect wifi at my office, results also the same
im on KF1 using dlink 615
hopefully someone can help us
tq
Just got my Galaxy S2 today. Cannot connect to wifi network on G or mixed mode, with or without security - just tries to obtain an IP address. Ridiculous.
Any help ? Quick search on Google doesn't bring up too much. There does seem to be an app called "FXR Wifi" but I don't expect to use that on a brand new phone.
Update: Upgraded my router's firmware (WRT54GS) and it works !
I have the same problem with my SGS 2. I can't connect to an AP - NETGEAR DG834G.
I found a partial solution to use my phone with my AP until I solve the problem. In the Wi-Fi settings menu enter Advanced mod and set the IP address, Gateway, Netmask, DNS1 manualy (by touching <Use static IP>). If you don't know what IPs you have to set for IP address, Gateway, etc. just connect with you laptop or desktop and use the settings from your computer. Just make sure you type a different IP address in your mobile (not the one from your computer - for example in you computer you'll find something like this: 192.168.0.3, you'll have to type in your mobile something like this: 192.168.0.10). The rest of the settings have to be identical.
Good luck!
To solve this "obtaining ip address problem". Set the following manually in the advanced configuration and save it.
1. ip address(your choice).
2. subnet mask(255.255.255.0).
3. default gateway(192.168.1.1).
4. dns servers(8.8.8.8,8.8.4.4)
Note: The above given values are the most commonly used, you change it if you want so.
After entering these values manually(and correctly), it will connect to the networ in 1 or 2 seconds.
like mine SG s2, wifi connects works perfectly at home and friends place,
but stucks at obtaining ipaddress for wifi, at the mall and college, ( where it needs first login page for authentication) ( or to agree user terms and regulation),
any idea, how to fix this issue.
Thanks
mine also does this where it doesn't get an ip. Reboot your router or just disable and re-enable the access point feature on the router and it should work without having to reboot it
Sent from my GT-I9100 using Tapatalk
but at university?college or mall, we dont have access to router.
any other idea to fix this
Thanks
Hey guys! Did you find a fix for this problem? I have the same thing happening right now. I tried at different places, home and country house with Zyxel P660HN and Cisco E4200 respectively. Stuck at obtaining IP address...
XSCounter said:
Hey guys! Did you find a fix for this problem? I have the same thing happening right now. I tried at different places, home and country house with Zyxel P660HN and Cisco E4200 respectively. Stuck at obtaining IP address...
Click to expand...
Click to collapse
Search xda with 'wifi rare' and 's2 wifi not working'.. U can find few threads dealing with wifi problem..
Sent from my GT-I9100 using XDA Premium App