Database Users

WiFi data transfer problem

I have a ZyXEL P-2602HW-D1A Wireless router. I have tried all combinations of security, even NO SECURITY WHATSOEVER, and still the device won't transfer data.
Not working;
Firmware: 1.5, Build: CR817
Wifi Router: ZyXEL P-2602HW-D1A
Security: Tried All; WPA2, WPA, WEP & None.
Problem: Connect under all conditions but no data is sent
Please help.

Have you tried another WiFi access point to check the devices WiFi module actually functions?

No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
jbelman said:
Have you tried another WiFi access point to check the devices WiFi module actually functions?
Click to expand...
Click to collapse

For some reason my N800 wouldn't connect to MY ZyXEL P-2602HW-D1A unless I set the device (N800) to disable any kind of wifi powersaving features it had.
On another note, how did you get your hands on the device so early? I'm guessing you are using a Cybercity internet connection? (I'm in copenhagen myself)
edit: I actually came to that solution when i noticed I could connect to OTHER accespoints, but not the Zyxel ones.

Same problem here in France with a Freebox as router

I've noticed under the router's WLAN client list that the device does not have a "Host Name". Would that present a problem?
It is assigned an IP address by the router without any problems, though.
Also the device seems to lose connection and reconnect constantly (every 5-10 seconds).
I done some digging around in the router settings and found an "AnyIP" feature. Would that possibly help?

There are a number of issues floating around. Support for WPA2 seems iffy and some people can just change to WPA or WEP and all work fine.
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
I have seen no solution to this anywhere and believe me I have looked. Some people have given up and got a new router, but this is not a solution.
Can someone confirm that this has been recognised as a fault with the magic and is being investigated, rather then assuming it's a user or router error. There are far too many instances of this across many brands of router for it not to be an issue with the HTC Magic.

zyborg said:
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
Click to expand...
Click to collapse
What I mean is have you tested the device on ANY other AP except the ZyXEL?

No, but since I'm by far the only one having this issue (try searching the web; see my last post), I didn't feel it was necessary. Just want some input from xda-dev that might solve the problem, if any.
jbelman said:
What I mean is have you tested the device on ANY other AP except the ZyXEL?
Click to expand...
Click to collapse

I've had exactly the same problem earlier with the N800 on the zyxel. Exactly how you describe it.
Did you find out if you could turn off any powersaving features on the HTC?

same problem here
in france with a freebox
I don't exaclty know what router is in the box
but I have excalty the same
I set on never the wifi sleep(powersaving) mode.
i found it in setting wifi menu button then advanced and "never"
but the problem is still here

zyborg said:
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
Click to expand...
Click to collapse
I have the exact same problem on mine. I just hope it is not a hardware issue...

Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?

Yes, I tried that also - didn't help one bit.
TheRookie said:
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Click to expand...
Click to collapse

I also have this problem. Im in Denmark with a Zyxel P660HW-p1.

Another user of Cybercity in Denmark with the same problem.
ZyXEL P-660HW-D1
The android is the only device that doesn't work. I have tried with Iphone and laptops.
I've tried to change the settings on the router to no avail.
Enable 802.11g+ mode [on/off]
RTS/CTS Threshold [2432/4096]
RTS/CTS Threshold [2432/4096]
Max. Frame Burst [600/1800]
The device shows up in the device list with no hostname, the HTC Magic gets the right ip address (using the program WhatIsMyIp to view it)

I had the same problem before, when I set my TP-LINK draft N router with WEP security my HD can see it, connect to it (but speed was slow tho), and my HTC Magic just keep saying its not in range. However, when I set it to open security it works, so I recognise its probably the security setting... so I changed that to WPA2 and then it works.
In my case, I see different device have different tolerance to some settings (in my case, draft N + WEP is OK with laptop, HTC HD, but not Magic), so its still worthwhile to try a few different settings, and try a public wireless access point also to double confirm?

Power save?
I have Zyxel (P-2602R-D1A) router.
I had exactly the same problem with my HTC Vox (winmo)... but that was solved by boosting the WiFi in the phone.
WiFi -> Best performance
So Im guessing magic is in some WiFi "power save" mode...
I dont know how this works, but I thought maybe you could change some WiFi settings behind the hood - that is if the hardware is capable of it.

Zyxel (P-2602R-D1A) router
I am having the same issue with this router as the other posters. The phone connects perfectly and reports an excellent signal, but barely sends or receives any data. I have used a terminal emulator to ping the router and it reports an 82% packet loss. This must be a big problem for many Danish users as it is the standard wifi router provided by two of the major ISP's.

same issue here with my vodafone uk magic.
wifi connects and i can browse for a few seconds then get a connection error and can't browse until i re-start wifi on the magic...
i've actually given up using wifi at home now due to this.
router is a talktalk supplied Huawei Echolife HG520b using 128 bit WEP
i can connect fine via wifi at the office so i don't think it's an issue with the handset, just with certain routers or router configs...
this issue has been reported on the vodafone uk forums but as yet no solution.
http://forum.vodafone.co.uk/index.php?showtopic=31937

X10 & Netgear DG834v5 Wifi Connection Problems - Solution

Hello all,
I love my X10, but the frustration with getting it to connect to my Netgear DG834 router was getting to me, so I dedicated an afternoon to working out a solution and I've found one that works for me, so I hope it'll work for you too.
Summary of problem
--------------------
The phone will connect to the Router once, and once only. Any attempt to re-connect to the wifi will result in the phone disconnecting, scanning again, then discinnecting until the user gives up. Nothing will cause the phone to reconnect (telling it to forget the connection for example). The only surefire way to reconnect is to reboot the router each time - not ideal.
Manually adding a Static IP also doesn't work - which is weird as that is how I've solved it, see below.
Scale of problem
----------------
The problem seems to be with the router and not necessarily the phone as it appears to be on a wide range of phones (Hero, Droid, Touch HD etc.). Seeing at the DG834 is the most popular router in the world, and Android is growing all the time, there are a large number of people affected.
However Iphone and Symbian phones appear to be unaffected.
Reason for the problem
-----------------------
Currently unknown, but appears to be something to do with the handshaking procedure when a device asks the router for an address (DHCP) - though as to what I don't know.
Solution
--------
1) Download an app called WiFiStatic from the App Market. WiFiStatic takes each DHCP assigned IP address and stores it in a small database to be re-applied whenever you are back in range of the same Router again. It is not an ideal solution as you may have to re-scan and re-assign if you visit a busy hotspot, but this is a two press function, so it's not that onerous.
2) Turn off your Router. Make sure the WiFi on your phone is off too.
3) With the router off, clear your Remembered WiFi connections (or at the very least the Netgear connection). Once that's done, turn the Router on again and wait until it is full back up again.
4) When the Router is fully operational again, turn on your wifi on the phone and let is scan for and connect to the Netgear Router. You may need to tell it to connect from the Wireless Settings menu on the phone.
5) The phone should now connect to the Router successfully. If it doesn't, repeat the above procedure.
6) With the phone connected to the router, fire up WiFiStatic. Check Auto Switch and Show Visual Prompt if they are not already selected, then Tap Add configuration at the bottom of the screen.
7) The IP address and other settings assigned by your router should be displayed at the top of the screen, at the bottom should be the name of your router and its MAC address. If not then tap Menu > Generate to populate the form.
8)Tap Menu > Done when everything is ok.
That's it. Now when you move into range of your Netgear, you should get connected, though it does take a bit longer than normal (the Router still wants to assign an address first before accepting the static IP). You can speed this up by changing the Device table on the router to always keep the Phone's static IP open.
This shouldn't work as all my other attempts with Static IP failed, but I've had five days now of instant connection to WiFi at home, so something has been freed up.

i can not tell you how seeing this post was like finding bin ladin in the white house. Prob would have found him twice trying to solve this WIFI problem. And the strange thing is this is the 1st phone i have had that there are so few posts about it...is everyone on that icrack? scary. cheers to you...

Thank you for posting this.
I tried this with my and it seems it doesn't make a difference for me. I still can only connect once to the router and for me to connect again i have to restart the router again. Am i missing something?
Problem is when I connect for the first time at home it works then when i leave to the office i use the wifi there and never have any problems there but when i get back home it doesn't work. Do you guys switch the wifi off manually when you are not using it?

one thing that is almost always overlooked is updating the router's firmware. this usually solves a number of issues. I dont know about netgear but it's worth a try to update

bimmerboii said:
one thing that is almost always overlooked is updating the router's firmware. this usually solves a number of issues. I dont know about netgear but it's worth a try to update
Click to expand...
Click to collapse
That was one of the first thing i tried....it seems i have the latest firmware.

Is this an issue for a lot of people then? Ive one of these routers and never had an issue connecting any phones to it. Had 3 nokias and 3 different android phones, currently on the x10, and they all connected fine everytime.

i have some troubles in x10i wifi connection and holp someone helps me~
------------------------------
im chinese, my x10i have had the lastest firmware but the phone cant connect the AP which set the channel is "13". but i used it long before and suddy just one day i find it dosnt work~ it cant scan(and find) the AP anymore !
then i have tried and config the router in another wifi channel(just like 1,8,11..) and the phone can scan and refind the AP.
i have tried to reload the phone's default setting,but it dont work(in channel 13)ToT
---------------------------
someone tell me why? and someone give me some suggest?
in china , lots of router's wifi channel are using "13" by default(factory setting);so, if my x10i cant works in that channel means i couldnt find the "opend APs" which in the public place(like KFC~~)
THX to help~

StampedChipmunk said:
Hello all,
I love my X10, but the frustration with getting it to connect to my Netgear DG834 router was getting to me, so I dedicated an afternoon to working out a solution and I've found one that works for me, so I hope it'll work for you too.
<snip>.
Click to expand...
Click to collapse
Thank you! I have spent three days trying to get my phone to re-connect to a DG834v5.
Your solution has worked! I had gone as far as reserving an IP address on the router and linked it to the MAC of the phone... no dice. The phone would connect once and then never again until the router was reset. Really irritating because I have two PPPoe connections running through the router with a routing table that has to be re-loaded via telnet every time the router is reset. I was considering a new phone or a new router.

HI,
I have near the same problem.
But I found out that when I remove on the access point the hidden function ( SID ) then it works perfect.
so that is a bug in the ROM of the X10, I have the R2b026.
At the moment everone can see my Access Point but I can live with that solution.

Worked for me! Many many thanks this had been infuriating me...

Same problem here - never had an issue with any other router, so I blame Netgear...
Let's just hope this works - it's been driving me crazy for the past 5 days...

Neh, hasn't worked for me....
Stupid freakin' Netgear...

works on the HD2 aswell. Thanks alot!

Not just Netgear, maybe Android
k1sr said:
Same problem here - never had an issue with any other router, so I blame Netgear...
Let's just hope this works - it's been driving me crazy for the past 5 days...
Click to expand...
Click to collapse
I am having the same issue on my HD2 Android 2.3.4, connecting to a D-Link DIR-635. If I use Static IP, everything is fine...

WORKS! I can't believe it, finally i can disconnect and connect without having to reset my router everytime. BIG thanks man!

alright, it worked fine for the first 5-6 hours. then it went back to not connecting without rebooting the router. this problem happens only with my home router, at work i can connect fine, as well as in other places.
any thoughts or solutions? i mean it did work in the beginning, then why did it stop? shall i change my router?
P.S.: i noticed that every time i connect to my home router i get the same IP address and all the stats are the same.

[Q] Limited connectivity wifi issue

I just bought a Rogers arc and everything is great so far, except the wifi. For whatever reason when i try to connect to my home network, although it recognizes it and connects i get a "limited connectivity" which effectively does not allow me to use wifi at all. ive tryed rebooting the phone and reseting my router (which is a D-link DI-524.) any help would be appreciated.

you could go in the router settings and register the phones mac address to a ip of your choice. it should do the trick i think...

I finally figured out what the problem was, i had to update the firmware on the router and then manually add the MAC address like dogggie said and after a reboot voila!

I don't want to make another thread since my problem is similar to this one. So in my school there is a hiden Wi-FI network and it has got a password, but we know Name and Password, so we can connect to Wi-Fi. But here is the thing: My friend who has SGS2 connect's without any problems, but everytime I try to connect to Wi-FI i get "Limited Connectivity" mesage. Is there any way to fix this? Can I somehow get Gateway and Netmask from router, so I can set static IP on my phone or sometheing like that?
Thanks for answers.

SEK610i said:
I don't want to make another thread since my problem is similar to this one. So in my school there is a hiden Wi-FI network and it has got a password, but we know Name and Password, so we can connect to Wi-Fi. But here is the thing: My friend who has SGS2 connect's without any problems, but everytime I try to connect to Wi-FI i get "Limited Connectivity" mesage. Is there any way to fix this? Can I somehow get Gateway and Netmask from router, so I can set static IP on my phone or sometheing like that?
Thanks for answers.
Click to expand...
Click to collapse
Zanimivo, na kero šolo hodš?
I have the same problem. Hidden Wi-Fi in school, limited connectivity. Works for some people, doesn't for most.
I have used CM7 for some time and the Wi-Fi worked with it, but I flashed the stock ROM back and now, again, it doesn't work.

Oo, another one form Slovenia Lep pozdrav. Šola je pa TŠC Kranj.
It also worked for me when I was testing Offical Beta ICS, but now I am back on stock 2.3.4 and all I can get is limited conectivity

tsckr
tehniskikranj
Same school.

Today it works. I have just manual set gateway, DNS servers, netmask and my own IP.

Cool. Mind sharing the values you used?

Does anyone have a proper workaround for the obtaining IP address?

Honestly I have no idea why this is happening on my android 4.0+ devices. I will get stuck on obtaining IP address connecting to certain networks and the only thing that worked for my home network is static IP. But for instances when I don't have access to the router to know what the static IP should be, is there a way to get this working? This happened on my phone as well. I was at a local cafe which had wifi and before I upgraded my samsung galaxy s2 to ICS, I could connect to their wifi no problem, now it has the same issue, and so does my Nexus 7. I don't know what to enter for static IP, I entered some random IP, it connected but internet still didn't work. Why is this problem plaguing ICS onward, and does anyone have a workaround when static IP is not an option?

This is definitely not a universal problem (I've never heard of it before). Are you running stock roms? If not, then do you have these problems with stock roms?

C2Q
Why are you posting this to multiple threads?
There is no "proper way" to use a static IP for a router that is setup for DHCP only. For routers that use both, many times the static IP's are reserved for specific devices.
Sent from my Nexus 7

Because I didn't notice the other thread before I posted this one. Anyway then why is this obtaining IP address loop a problem on ICS? As I said, my phone on GB would manage to connect/obtain an IP address just fine before I upgraded to ICS. This happened with my home router and other areas as well. The solution that worked for me at home was to assign a random static IP within my routers IP range. But if I don't know the gateway IP this won't work. So what gives? I'm kind of confused what you mean by routers set up for DCHP only. If I use static or DCHP options on the android device to connect, they will both work (this was before ICS).

I ran into similar issues with my nexus 7 and my work open wifi. It needs you to connect to a web login page where you accept a use policy before you can surf. My nexus would connect but never redirect to that login page.
The issue was resolved by using static IP instead of DHCP and also by changing the DNS values to DNS1 8.8.8.8 and DNS2 4.4.8.8
Changing those settings lets me finally use my work wifi. My phone also has the same issue (its an ICS phone, whilst the nexus is jelly bean) but is not resolved with this change.

Sunburn74 said:
the issue was resolved by using static IP instead of DHCP and also by changing the DNS values to DNS1 8.8.8.8 and DNS2 4.4.8.8
Click to expand...
Click to collapse
Sure that is not 8.8.4.4 ?

Thanks for posting this question. I have exactly the same problem with my Samsung S3 (ICS) and Nexus 7 (Jellybean). My old Samsung S2 (Gingerbread) worked fine.
I am trying to connect to a hotel open network. When I try I get the looping "Obtaining IP..." message. I have a strong network signal.
What gives? How come earlier versions of Android worked but later ones don't?
As the OP stated, the static option works insofar as I can then connect to the network but the made up static IP numbers do not actually let me download (or upload) data. As the OP wrote, you need to know some valid values for the static IP setting.
Does anyone have a solution for this (apart from downgrading to Gingerbread)?

Ive always had this issue but my home router has dhcp off. A majority of routers start with 192.168.1.1 or 192.168.1.2 so its not hard to work it out.
BT routers always start with 192.168.1.254 so there's another option dunno why my devices do it but im used to it. My Wifes Xoom 2 and wildfire S are stock and do not have the issues my rooted ones do but i have just put it down to coincidence

First off. Is your modem in service? Do other devices connect? Have your restarted your tab? Does it connect to other networks? Meaning going to another WiFi hotspot If you can answer yes to all of these questions we move on....
What modem/router are you connecting to?
What type of WiFi encryption are you using? Wep-open, WPA, wpa2-psk
On the tab does it fail to obtain the IP address? Meaning it says "remembered"?
Not going to lie more the 3/4ths of the time you have the wrong WIFI PASSWORD. CHECK IT AGAIN usually its on the modem/router or if you have no clue here is a hint: on windows vista and windows 7 under control panel>network and sharing center>manage WiFi networks if your right click on the network name such as "Ilovepancakes"and go to properties it will have a security tab that you can click on and show password.
Sent from my Nexus 7 using XDA Premium HD app

bonesy said:
Ive always had this issue but my home router has dhcp off. A majority of routers start with 192.168.1.1 or 192.168.1.2 so its not hard to work it out.
Click to expand...
Click to collapse
I don't know what you mean. Do you mean that I should try these numbers to see if they work? You need a number of values to set up static IP addressing to work.

Did you dirty-flash your Nexus? A while back my Gnex wifi connections would take longer to complete the handshake. I did a factory reset/fresh install & it has been much faster.

strongergravity said:
Did you dirty-flash your Nexus?
Click to expand...
Click to collapse
My Nexus (and GS3) is completely stock (I have only added a launcher).
This problem seems to be caused by older routers, which don't seem to like something about newer versions of Android.
I'm not sure if it's something Google can fix, but the combination of old router and new Android seems to make logging onto wi-fi networks a problem.

Bump.

Ive been struggling with this problem for a week now since getting a transformer infinity. My s3 gets stuck when I try to connect to it. The tab cycles through connecting, obtain a valid address and saved.

I bought a new 32gb nexus yday and had this issue. I entered advanced settings, changed dhcp to static. Changed IP addy to 192.168.1.1 and it worked fine. Only had to do it once. After that it connected to every network fine without changing settings again.
Sent from my Nexus 7 using xda app-developers app

Warrior1975 said:
I bought a new 32gb nexus yday and had this issue. I entered advanced settings, changed dhcp to static. Changed IP addy to 192.168.1.1 and it worked fine. Only had to do it once. After that it connected to every network fine without changing settings again.
Click to expand...
Click to collapse
This worked for me also (Infuse 4G on JB), but it seems like this is only a problem on WiFi AP's that have marginal signal strength, even though they appear to have full bars. I personally have never have seen this issue on a network that was performing properly.

Same here!
Same thing is happening to me! Im using he htc desire c running ics.. my phone detects the wifi network, shows that it has excellent strength, but it gets stuck at "Obtaining IP Address"! My friend and I both bought the same model a couple of weeks earlier and till now neither of us have been able to connect to a wifi network! Please Help!!!

its a DHCP bug
This is probably not a problem with your network configuration unless it works everywhere else; im having the same problem as well as other people i know and its definitely a bug with DHCP, so the only way to work around this is by using a static ip as far as i know

bobbyelliott said:
I don't know what you mean. Do you mean that I should try these numbers to see if they work? You need a number of values to set up static IP addressing to work.
Click to expand...
Click to collapse
What he's saying is that most routers will begin assigning addresses starting with 192.168.1.1 or 192.168.2.1 for itself (you can access the router configuration page by typing in this address into a web browser), and then increment upwards afterwards. If you knew that the router started its DHCP addressing with 192.168.1.1, for example, you could try 192.168.1.2, and so on and soforth.
If you did a "dirty" upgrade, I'd recommend doing a factory wipe (after an appropriate backup-- there are some good apps out there that can handle this). In-place OS upgrades have a bad habit of being finicky. Android is also generally less tolerant of network "misconfigurations" than, say, Windows, OS X, or iOS. Many networks that use captive portals (your standard coffeeshop Wi-Fi) deliberately use an altered network setup to support their access policies, such as a captive portal.
However, with the exception of corporate/enterprise networks (which may require fine-tuning because of increased security), you really shouldn't be messing around with this if you don't have at least a rudimentary understanding of how networking works. That's not meant to be insulting, but when people plug in random values and find it doesn't work, it tends to lead to more frustration than utility.
(fyi: The reason you can "connect" by tossing in a random set of octets your your IP and DNS is because you've properly authenticated against your router, but you'll never be able to receive data unless your router's DHCP lease lines up with your self-assigned IP, because the router never handed that address out to you. It's the digital equivalent of building a mailbox in front of your house without registering with the post office, and wondering why you never get mail).

Wi-Fi connection intermittent failure - requires router reboot!

I've been having this issue with both my Nexus' - my 10 and my 7.
I'll look up and find my connection bars greyed out or none showing and my connection dead. All the other devices on the network will be functioning just fine, just the Nexus will have no connection (I have two laptops - one Mac one PC - several cell phones and sometimes a printer)
Looking at the settings the network will show that it's either trying to connect over and over or just "saved".
Attempts to log back in will be unsuccessful with the device seeming like it's failing to get an IP address our something.
The ONLY way I can get reconnected is to reboot the router itself. Quite a drag...
Google doesn't seem to turn up anything, and forum searches likewise have not been successful
(One problem is there's a lot of 'noise' in results from searching trends like "Wi-Fi", "connection", etc).
Anyone have a clue? It's annoying, especially when it happens somewhere I don't have access to the router (coffee shop etc).
Mostly tho, it seems to happen at home.
I'm running a Belkin N150 router with out-of-the-box settings.
Any help would be greatly appreciated!
Note: the problems don't always show up on both Nexus' simultaneously. Sometimes one will have a connection while the other does not, and sometimes they'll both be disconnected.
Every other device's connection will be fine tho.
Sent from my Nexus 10 using Tapatalk

i think ur facing ip conflict, new routers should not have such issue but ur nexus devices seams to have such issue.
try this, manually setup ips in ur nexus device (give ips as far from ur normal ips e.g nomal ip 192.168.1.5-6-7 u try 50-51-52
and also give google dns in ur manual settings
8.8.8.8
8.8.4.4
grayed out signals means ur device cant resolve dns (usually cant connect to google)
replay with updates.
P.S: if you have connected to ur router via push button process then also try connecting to it via entering wifi password key.

xateeq said:
i think ur facing ip conflict, new routers should not have such issue but ur nexus devices seams to have such issue.
try this, manually setup ips in ur nexus device (give ips as far from ur normal ips e.g nomal ip 192.168.1.5-6-7 u try 50-51-52
and also give google dns in ur manual settings
8.8.8.8
8.8.4.4
grayed out signals means ur device cant resolve dns (usually cant connect to google)
replay with updates.
P.S: if you have connected to ur router via push button process then also try connecting to it via entering wifi password key.
Click to expand...
Click to collapse
Thanks, gonna try this. Lately been getting grey bars but still have internet so perhaps it's related to a dns problem.
Sent from my Nexus 7 using Tapatalk 2

Download free App from Store - "Wifi Analyzer" to scan your 2.4 Ghz band to see if interference from other nearby routers on the same channel might be causing interference. Switch to a less congested channel might solve the problem, Fios routers tend to default to Auto, usually on 1, 6 or 11 - your signals might be "fighting" with several others routers trying to "hand-shake" between the devices - do it while rebooting the router.
Take a look under Settings - Wi-Fi and then "Advanced" to see what is your N7's setting on "Keep Wi-Fi on during sleep" - if it switched into energy mode/sleep, it might stay there & wake up to resume. This is known to happen to Android devices but iOS ones too.

https://code.google.com/p/android/issues/detail?id=40065
This is a known problem. Read the above for more information.
My solution https://code.google.com/p/android/issues/detail?id=40065#c737
I have a N7 32G and an ASUS RT-N66U and had been having disconnection of my Wifi during use. Sometimes, turning on and off Wifi works but at spots in my house that's a bit further from the router, it will not connect. A few weeks back, rebooting my router helped for a few days and same problem occurred again. Then I tried static IP, and that helped for a few days. The latest test I did was to increase the "Network Key Rotation Interval" on the N66U from the default of 3600 to 7200. Crossing my fingers and hoping that this will finally solve my disconnection problem. My Wifi is set to 2.4GHz band, Wpa2-personal AES.
My firmware https://code.google.com/p/android/issues/detail?id=40065#c743
is firmware is 3.0.0.4.260 which is the latest.
Hope this will be useful for you. :thumbup:
Sent from my Nexus 7 using Tapatalk HD