Related
Hi
I have a Qtek S100 (Magician) and I'm using the OmegaOne 1-Pass v1.1.1 program, a cool program to lock down the device.
My problem is that after installing it I lost the record key functionality, when I press to record nothing happends.
The only way I found to resolve this is every time eI reboot the device I have to goto the Buttons settings applet, open and close it.
After this all works ok. :shock: Hummm.... strange....
It seams something goes wrong at startup.
Can anywone help me to resolve this annoying issue?
Thanks
ROM version : 1.11.00 WWE
RADIO version : 1.11.00
Protocol Version : 1337.42
extRom Version : 1.11.129 WWE
Omega-One Batterypack Pro gives me same problem on my iMate (xda2) running wm 5.0 and so I have uninstalled untill there is a workaround.
Victor
RuiMg said:
Hi
I have a Qtek S100 (Magician) and I'm using the OmegaOne 1-Pass v1.1.1 program, a cool program to lock down the device.
My problem is that after installing it I lost the record key functionality, when I press to record nothing happends.
The only way I found to resolve this is every time eI reboot the device I have to goto the Buttons settings applet, open and close it.
After this all works ok. :shock: Hummm.... strange....
It seams something goes wrong at startup.
Can anywone help me to resolve this annoying issue?
Thanks
ROM version : 1.11.00 WWE
RADIO version : 1.11.00
Protocol Version : 1337.42
extRom Version : 1.11.129 WWE
Click to expand...
Click to collapse
Hmm... I am using 1-Pass on my XDA Mini (running Qtek S100 1.11 big storage ROM) and didn't face the problem you mentioned.
The only problem is the occasional hanging on the password entry screen especially if an SMS comes at the point when i press the ON button -- this results in the screen being incompletely painted and hangs.
I've written to the developer who has acknowledged this as a known bug. Had this when i was using 1-Pass on my old XDA 1 too.
cheers,
Patrick
I just got my new Wizard ([email protected]).
As I used Magician ([email protected]) before, there is a smart dial option for the phone.
I can make a call with "ONE Finger" but in my Wizard..I have to scroll all contacts to make a call.
Is Smart Dial option available in others e.g. Qtek, i-Mate...etc?
Can please help to extract this for me???
Many thanks
If you go in the ftp under uploads\kjam you can find the extended rom of this device (imate kjam) that support smart dialing. Inside the extended rom there is a file named Default_SmartDialing_enable_0915_signed.cab. Perhaps this help you.
thanks
BTW, what's the username and password for login ftp.xda-developers.com?
Or....would anyone can help to extract the files for me?
Thanks!!!!!!!!!!!!
Copy the files to your ppc and run then from within the ppc exporer,
then it will be installed, you don't need to extract anything.
I will send you the files tonight ;o)
Thanks guys!!!
I final got the files "Default_SmartDialing_enable_0915_signed.CAB" and install into my Wizard Chinese Version.
But there are no different and no way to enable SmartDialing.
Would anyone can have a screen capture on it or show me how to enable it.
I still need to search thru the whole contact to start a call.
Thanks
Could you please post the file cause i have the same problem on my i-mate k-jam
Thanks
If you have a KJAM you already have smart dial.
To enable smart dial you have to open the dialer (press green button) and then press right softkey to open the menu, the bottom selection is SMART DIALING OPTIONS that enable/disable the function.
Here is the smartdialing cab...I have installed in chinese Dopod 838 (K-Jam) and no effect
I just think the files seems too small...do anyone know is it enough for installing SmartDialing????
Hey, I'm also using Dopod838 Chinese... The quick dial is enabled by default... no need to do anything in addition. When you're in the phone applet, press your right softkey and select "快速撥號 (I)" can setup speed dial numbers. 8)
He's refering to Smart Dialing, not Speed Dial Tse... The file size is correct miko... How did you install it? Did you copy the cab file to your storage card or whatever and run it from there?
One thing I missed, is the O2 Dial Wizard on my IIs.. It let you edit the number before dialing and set carding card prefix etc.. Too bad it doesn't seem to work on WM5 or my Exec
I recommend on using Phoneplus which I realized is suitable for WM5.
I have tried the CAB file and it is not working, too.
Anyone successfully run Smart Dialing on Dopod 838? I miss this application very much! :roll:
I found the CAB file actually only activate the smart dialing, which does not contain any program file. The program files should already installed in the K-Jam default ROM.
So I think the smart dialing will be able to run in Dopod 838 by copying the following files from K-Jam devices:
- \windows\phcanhtc.dll
- DPadMenu.dll
Anyone can help? :wink:
This is the Smartdialing program i used for XDAIIs before, u can try to install it into the 838, please give result after try.
Thanks Vincentfung for the file. :wink:
I have tried to install the cab. However it doesn't work nor have any change to the dialer. I think it is for WM2003SE. So... we need the WM5 version of Smart Dialing that found in English K-Jam or English Dopod 838, or maybe Universal...
This one is on my device, and it should work ?
qtek9100 / Vario
I update my MDA pro with this rom UNI_DOPOD_ASIA_130111_130230_11100_WWE.
And I don't install any cab in Extended rom.
But now smart dialing doesn't work.
In the dail pad,no drop list when push key, and when I push menu->Smart Dialing Options nothing happend.
How can I enable smart dialing again?
Need install something or just adjust setting?
I have tried this cab
SmartDialing_enable_0915_signed.CAB
from
http://forum.xda-developers.com/viewtopic.php?t=46836&highlight=smart+dialing
and nothing happend.
And I have tried SmartDialingWM5.cab from
http://forum.xda-developers.com/viewtopic.php?t=48917&highlight=smart+dialing.
But it seem that it is desgined for QVGA and doesn't work properly.
Got it.
After install this cab Default_MP_Enable_VT_RTPlugin_0727_2_signed.CAB in the Extended rom, it had been resolved
Hello,
I have upgraded my Q2020 (T-Mobile MDA) with new rom PDAVIET_ROM_WM61_OS19213_HIMA_SONBLACK
After boot I saw strange info that following SW do not work.
1. psShutXP
2. BTIcon
3. USSD
4. SMS Reciver
5. plm_traylnch_182
6. PhoneService
7. IMSartup
8. pBar
The worst thing is that I cant use Contacts - it does not work
I hade the same situation when I used ROM: 6.1.2a16CS (WM6.1 AKU 1.0)
Could you help me to solve those problems, and find right rom for my PDA ?
rozkwit
did you do the last step in the flashguide where it tells you to
choose yes to clear register hive and clear storage?
if not do that
No,
I just install new rom on the boot mode, and restart it after.
Could you provide me instruction how to install WM6.1 correctly?
Piotr
works
I clear register after installation I works properly.
Many thx for your help
Piotr
Hello, I have the same probleme ! COuld you telle me how doing this ? Because I don't understand !
Great Thanks my friend
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
Thanks for your answer,
But, my pda is not an HTC, but a MIO.
I use the hermes kitchne whiwh is compatible for my MIO.
So there is a problem on the rom !
Any idea ?
Great Thanks !
this is how it's don with htc himalaya dont know how MIO devices clear storage and registry but if wm5 and or wm6 was made for it
it have to be able to do it somehow
I had this issue when i was being lazy and not reading the instructions fully with my Himalaya. It only seemed to happen when going from one WM6 ROM to another and the, not so quick, fix was to flash back to the WM2003 each time.
Reading the instructions properly means i no longer have to do this.
Might work for you.
I get this ROM from my seller overseas He told me that this ROM is WM6.5 and works with T3232 and T3238 and on T4242 too:
Instructions:
1. You can flash and update your phones to english with this ROM:
ROM English WM 6.5 T3232 / T3238:
http://www.imprinthk.com/T3238+/T3238_WM6.5_EN.zip
ROM English WM 6.5 t4242:
http://www.imprinthk.com/T4242/T4242_WM6.5_Eng.zip
2. Download the file, and unzip it.
3. Before begin the process make a backup of your information and format your micro SD with a format of FAT16, you can use this program to do this http://www.cnetx.com/format/
4. Copy the file SMART.UPR to the Micro SD.
5. Turn off the phone.
6. With your phone turned off press in this orden this combination: send button (green button)+enter button (central button)+power on button. Keep it press until a white screen appears, this screen is "Update Mode".
7. The update process will begin, wait until the process is finished.
8. It's all ready you can enjoy your new ROM with WM6.5 and touchflo
NOTE1: I wait for your commments and experiences updating your phones T3232 y T3238.
NOTE2: I'm not responsable for any damage in your phones cause for this process. The update process it's on your own responsability.
Nope, the button combo for "update mode" doesn't work on the T3232.
I tested the english rom wm6.5 on my t4242 and now, my wheel doesent work and i dont know what i can do, that it works again.
downgraded back to 6.1 doesnt show effect, now my wheel doesent work and i have the same wm like before -.-
Your ROM link is down!?!
ROM English WM 6.5 T3232 / T3238. on T3238+ g-sensor not work ''Motion Sensor'' . ROM English WM 6.5 t4242 on t3238+ tested, now my wheel( button)doesent work correckt, ''Motion Sensor'' work correckt - help!
Download link is down
Hi!
Unfortunately the download link is down. Could somebody please post a working link? Or, if it is not possible, send the files by e-mail?
Thanks a lot!
http://www.imprinthk.com/download/T3238/T3238_WM6.5_EN.zip
http://www.imprinthk.com/download/T4242+/T4242+_WM6.5_EN.zip
Bluetooth problem
with this ROM I have Bluetooth problem on T3238, data sending but not receiving. T3238 visible for other phone and wiriting about error.
Somebody know solution?
Start-Settings-Connections-Beam. There is "Receive all incoming beams".
New English Rom(UPR)WM 6.5 (build23088)
http://rapidshare.com/files/333098661/T3238_WM_6.5_23088_.rar.html
When i exec the update procedure, pressing the buttons, one white screen saying "Calibrating..." is show, and the indicator led is pink. Above many seconds, the cel turn off and when i turn this on, the system not updated.
Help-me please....
piubello said:
When i exec the update procedure, pressing the buttons, one white screen saying "Calibrating..." is show, and the indicator led is pink. Above many seconds, the cel turn off and when i turn this on, the system not updated.
Help-me please....
Click to expand...
Click to collapse
Exact same problem please help
The New T3238 HTC/HTY/Dopod/Whatever
I have the same problem - calibrating screen
But I think our problem its a bit more complicated:
I got a T3238 yesterday. Look this device information:
Version:
ROM Version: 01.002.2 P638M30 EN
ROM Date: 11/30/2009
Radio Version: 1.07.9324
Protocol Ver... DV3.0
Hardware:
CPU: MarvellPXA310
Speed: 624Mhz
RAM Size: 192Mb
Flash Size: 256Mb
...
Identify:
Model No. V3
...
I was accessing 999ppc.com looking for information about the Rom P638 and this Rom is related to Huawei K3 processor.
In the box is a Qualcomm, the device says it is a Marvel, but is a Huawei?
I also found a wm6.5 Rom, but in chinese.
Will another wm6.5 WWE/EN Rom work in my cellphone ? I was trying to use Jade23071wwe but it cannot retrieve the actual rom version.
How can I flash it ? I also didnt find a hard-spl to work...
Help pls!!!!
Update mode for HTC/HTY 3238 phone - FOUND
I found the update mode in my 3238:
Hold power + volume down + send button (green button).
But not sure to upgrade to WM6.5 because bios information above.... Anyone have tried ?
I have wm 6.5 on my T3238
(build23088) - no outgoing calls
(build21222) (in first post) - no problems
You updated using a smart.upr file or a .bin file ?
I tried a upr, but my cellphone does not recognize.
My Bios is a P638M30 EN, so i suppose my processor is a K3 not Marvell.
I found a rom for this bios at 999ppc and DBank (chinese forum) thanks to Google Translate - but the wm6.5 is in chinese ....
This is the filename: P638M30_TH_UI1_L12_C7_CHS_MFGW_WM650_C02SPC002R01_091203.bin
I think a .bin file will work, but I'm afraid to test this chinese rom in my T3238 clone.
my cellphone does not recognize to.....
the name of file is to long.......
i changet name of file on "SMART.upr" and it work
it must work
spooky29 said:
Nope, the button combo for "update mode" doesn't work on the T3232.
Click to expand...
Click to collapse
neither on my t3238
How can I install a language pack? WM have some kind of mui file? I need one with portuguese language.
chz said:
New English Rom(UPR)WM 6.5 (build23088)
hxxp://rapidshare.com/files/333098661/T3238_WM_6.5_23088_.rar.html
Click to expand...
Click to collapse
File isn't available anymore