Database Users

Newbie Essentials O2 Germany for English users

First of all the correct unlock utility can be found on this post:
http://forum.xda-developers.com/viewtopic.php?t=33796
The next most important thing is to know how to do a hard reset, you hold the "Communication Manager" and "Voice Speed Dial" buttons while pressing in the soft reset button(that is the small button next to the IR port), make sure to keep holding the two buttons after you press the soft reset. Then a screen will apear to have you hit the green call button to make sure you want to reset. This will format your user info and make you peform the startup tests again.
If you want to load an english rom, I suggest the Qtek one since it is very easy and all the software runs on the computer instead of needing to load files on to a SD card or the wizard. The whole application can be found here:
http://www.beyondthetech.com/blogs/kjam/
The link to the file is at the bottom of the page in the last blog. You will need to have Active Sync 4.1 for this phone and it will have to be working for this application to work.
Have fun everyone and I think this forum is great.

Sorry, but I can't find anything on this pages.Does anybody have an English Rom of HTC Winrazd???I have a HTC winrazd but it's Germany.I needed an English Rom.Sorry for my bad English!!!!!!!!!!

hi all,
Am also looking for english rom for wizard..I would very much appreciate if any one can help.
Tks isse

English rom here
http://www.beyondthetech.com/blogs/kjam/2005/11/qtek-9100-rom-available-for-download.html

i have an imate kjam & i was wondering...
what would be the best rom image for it? should i keep it on the imate rom or is there a better rom with better features for my kjam?
tx in advance.

IIWPO: Theft protection also proven on Wizard

Based of the IIWPO solution initially meant for Wallaby devices (see http://forum.xda-developers.com/viewtopic.php?t=2526), I created a customizable installer for Himalaya:
See the Wiki page on IIWPO
http://wiki.xda-developers.com/wiki/IIWPO
Hopefully IIWPO suprises a lot of thiefs!!!!!
IIWPO has proven that it is also fully functional on Wizard. I guess this means it woll be working on WM5 devices in general.
One remark: Due to the different memory behaviour under WM5 you might notice IIWPO does not send an SMS immediately after you change the onwer-info (ie. for test purposes). But it definitely will when the device is woken up after some time!

I followed every step and it isn't working for me.
I checked every setting after installing and everything is in the right folder / registry.
I rebooted my Wizard several times (poweroff button / pen soft-reset) and it never send an SMS.

WM2005
edsub:
How do you get around the fact that WM2005 no longer has a useful extended rom and config.txt? Do you now install a iiwpo.exe into the \Windows\Start-up folder?
Any ideas on how to hide it successfully the way it used to be in a hidden and locked extended Rom?
M

Anyone has tried it on Kjam?

QuasaR said:
I followed every step and it isn't working for me.
I checked every setting after installing and everything is in the right folder / registry.
I rebooted my Wizard several times (poweroff button / pen soft-reset) and it never send an SMS.
Click to expand...
Click to collapse
I guess you did personalize the platformxxx.reg file (put in your own data, note the phone# needs to be in international format).
If then the registry just contains the correct data, ie YOUR correct name and SOMEONE's phone# (to send to sms to) I cannot imagine it is not working. The SMS should be sent when your device is woken-up (by just pressing power button). Afaik the SMS is not sent when the device is switched on (ie. after pressing power button 5 secs) or a reset.
pneuma said:
Any ideas on how to hide it successfully the way it used to be in a hidden and locked extended Rom?
Click to expand...
Click to collapse
Until there is a decent solution the trick is:
-Backup your OS & radio rom using aWizard tools
-Flash with an 1.5.x ROM using regular procedure (RUU)
-Create your own ExtROM (its writable in this version)
-Restore your backed-up OS & Radio ROM using aWizard tools
Advantage of this is the thief also cannot purge the ExtROM (without upgrading) . . .
slumpolo said:
Anyone has tried it on Kjam?
Click to expand...
Click to collapse
As KJam is a Wizard also there is no reason why it should not work

is it possible to use this tool, but without locking the ExtendenRom and without rom upgrade?
even if it is less safe...I prefer using my Extended Rom for some applications but also prefer not to upgrade my Qteck9100 yet.
So I have put it all in the extended rom, but will this 'Config.txt' and 'Autorun.exe' be invoked on a hard reset when the Extende Rom is not locked...
when installing, should i install it in the extende rom or in the device itself?
thanks for the great tips!
CIAO!
VOODOOS!L

edsub said:
QuasaR said:
I followed every step and it isn't working for me.
I checked every setting after installing and everything is in the right folder / registry.
I rebooted my Wizard several times (poweroff button / pen soft-reset) and it never send an SMS.
Click to expand...
Click to collapse
I guess you did personalize the platformxxx.reg file (put in your own data, note the phone# needs to be in international format).
If then the registry just contains the correct data, ie YOUR correct name and SOMEONE's phone# (to send to sms to) I cannot imagine it is not working. The SMS should be sent when your device is woken-up (by just pressing power button). Afaik the SMS is not sent when the device is switched on (ie. after pressing power button 5 secs) or a reset.
pneuma said:
Any ideas on how to hide it successfully the way it used to be in a hidden and locked extended Rom?
Click to expand...
Click to collapse
Until there is a decent solution the trick is:
-Backup your OS & radio rom using aWizard tools
-Flash with an 1.5.x ROM using regular procedure (RUU)
-Create your own ExtROM (its writable in this version)
-Restore your backed-up OS & Radio ROM using aWizard tools
Advantage of this is the thief also cannot purge the ExtROM (without upgrading) . . .
slumpolo said:
Anyone has tried it on Kjam?
Click to expand...
Click to collapse
As KJam is a Wizard also there is no reason why it should not work
Click to expand...
Click to collapse
I personalized everything but it never sends an SMS so i tried to run the files manually.
When i run the file \Windows\iiwpo_main.exe is sends the SMS immediately.
Any ideas on where it can go wrong ?
I also tried to run the \Windows\iiwpo_start.exe and \Windows\Opstarten\iiwpo_start.exe but that did nothing.

Himalaya + WM2005
edsub:
Referring to your reply, sorry I failed to mention I am using Himalaya and enjoyed the iiwpo up until I upgrade to WM2005, after which the extended rom became a useless memory area for Hima devices and was therefore re-claimed with buzz's DOCtools.
Does the extrom in wizard wm5 still have a purpose? As far as I know the files like config.ini never get called by wm5?
Also, Is the current release a rewrite for WM5 or still the same version since 2003 1st edition?

How can i unnistall IIWPO ? I need real HELP pls
Hi guys
I installed IIWPO in my Qtek9100 (Wizard), followed all steps and it doesnt work.
So I decide to unistall it.
I did it from Revome Programs option and with resco i removed registry key .
Now when i do a soft reset i receive allways a Notification Error Mess : Cannot execute \windows\IIWPO_main.exe
This appears also during phone calls !!!
Apps are not in \windows and no more in \windows\startup, registry key is not there. What can i do more ?
Please I need HELP
Thanks
Jorge

My guess is that non-functioning has to do with localized versions of WM5.
The cab uses hard-coded pathnames (needed by setup.dll, especially during the customisation process)

It is confirmed that un-install issues have to do with a left-behind notification in the notification db.
Use Check Notifications by scarybear software to get rid of all IIWPO notifications OR do a hard reset :wink:
I updated the IIWPO wiki on this

German and French Language Pack for English WM5

Hi folks,
I made a "German Language Pack" (cab), which makes some german features available. See below
I am also working on a french version but I do nt have the french dictionary file for spell checking (mssp2_fr.lex) nor a french table for áà,... (sym.txt). If anyone could pm it to me I would be happy to update the language pack. Until then spell checking and symbols are as original only...
How-To:
1. download zip-file and unzip
2. copy cab-file to PPC
3. execute cab-file.
4. Softreset device
More information on the changes to registry and the included files are in the enclosed inf-file.
This tool was written for the Wizard device, but as the only Wizard-specific things are the settings for the hardkeyboard there shouldn't be any complications with other devices running WM5.
If anyone has suggestions for improving my little tool I would be pleased, if you could tell me!!
Hades.

new version with autocomplete feature added.
Still working on softkeyboard... - any suggestions?

hi hades,
does your little localizer work with the new aku2-roms? i have a himalaya aka xda2 with tofclock's 2.01a64wwe rom which is aku2. thanks for any info.
peter

i cannot report for any Himalaya images as using a Wizard (i-mate ROM 2.16). But the little tool does nothing system-critical. It only adds a view files and changes some registry settings, which are pointing to these files or concerning language settings. Therefore it should work with any WM5-device and -ROM, without interfering with any other abilities. I guess the settings concerning the hardkeyboard will just be ignored if the device does not have one.
For further information on all actions taken by the tool, please have a look at the enclosed inf file.
Hope that helped!
Hades.

transcriber doesn't work any more
I've just installed your french language pack on my Dopod with the latest Dopod rom 2.15.13.27 WWE and the transcriber doesn't work any more not in French neither in English. I get the message: Une erreur est survenue lors du chargement du moteur de reconnaissance de fichier.dll Vérifiez le chemin et la quantité de mémoire disponible.
I've followed your instructions and installed it successfully but I then got the message that the program was meant for an older version of WM and that maybe it would not work.
Is there a way to uninstall it without messing with the registry? My problem is worsened by the fact I can't manage a hard reset. I tried everything holding down the power button with the stylus in the small hole, sometimes also holding down the camera button at the same time, sometimes with the device turned on and sometimes turned off. No way, impossible to hard reset! Please help me, and thank you anyway for your work. I was very excited and I am now very disappointed.

yes it's a good idea
thanks

sorry 'bout that. I wasn't able to test the french language pack myself. I have overlooked the file and cannot imagine why it shouldn't work as it is similiar to the german one which is working quite well. Information on the changed registry settings are in the enclosed inf-file.
But anyway you should be able to uninstall it with the WM5 built-in uninstall feature (Settings --> System --> remove(?) programs). Perform a softreset thereafter by long pressing the standby-button (not digging the reset hole!)
To Hard reset your device you have to press and hold the comm and voicedial buttons simultanously, then press the reset button (small hole) with your pen, while still holding the other two buttons for a while, until finally you are questioned if you wan to completly delte your device. You have to confirm by pressing the green button. Make sure you have a bakup - I'd recommend SPB Backup.
Well, once again sorry.
Hades.

Thank you again for your kind answer. Actually I had to reflash my rom cause I couldn't do any hard reset. I was stupid not to think of removing the program first, since I didn't think it was a "regular" program. You mention the comm and voice dial buttons as two different buttons but actually on my Dopod it's only one button. Did you mean then the power and voice dial together, which coud make sense and which I didn't try cause nothing like it is mentioned in the user guide. Do you think I could have got the problem with your program because I used the stylus in the hole to soft reset my device after installing the french package. It is the procedure mentioned in the user guide for soft reset, contrary to what you tell me now. Thanks again

oh ok - I was assuming you have a HTC Wizard (don't know the dopod model number). If it's not a Wizard I have no idea how to hardreset it. But I hope you're using WM5, for my little utility is for WM5 only.
If you do a soft-reset after a change of the registry using the reset-hole the changed settings may not be stored on your device. That is because the registry-file is not immediatly updated after the changes, but stored in a temporary space and later (who knows when!) written to the file. So if you reset it by hardware-button the changes are still in the temporary space and therefore gone after the reset. If you do the reset by using software-reset function (provided by e.g. SPB Pocket+ or magicbutton) or simply switch off the device using the standby-button, the temporary space is written to disk before shutting down. That's it.
À bientôt,
Hades.
P.S.: I updated the language pack, cause I found a minor difference to the german one. (Compare inf-file) But I can't tell, that that was the problem.

My Dopod is a 818Pro with WM5, so it's a Prophet and practically the same as a Wizard, as I've seen in the forum. What you say about soft reset is very interesting since I haven't seen it discussed very often in this forum and i searched it quite thoroughly. Have you tried removing your program through the regular WM5 procedure? You seem to imply that the registry was not changed after my soft resetting with the hardware button, but it seems strange to me since after resetting I got the french warning I mentioned in my first post, and it was the first ever message in french from my english speaking device! Some change had definitely occured in the registry or somewhere else. Thanks again

well. I tried to remove and it worked. Concerning your registry I don't know wether it was changed or not. Depends on many things, I think.
Sorry,
Hades.

I've just installed the German package on my Himalaya device with English AKU 3.2. It works Thank you Hades!

hello Hades77
Actually i successfull changed hardware keyboard but also spellcheck, dictionnary (i think even T9 but i'm not using it) and special characters to french and it's compliant with 3.2 rom(thanks faria). As i can see you package does not include those feature yet ... Are you interrested in getting those files and including them into you cab ?

thanks a lot!
Hello hedes,
i just installed your german cab! it seems to work perfect on my phone.
THANK YOU VERY MUCH FOR THIS, IT MAKES LIFE EAYSIER WITH WRITING WITH AN ENGLISH ROM

Hi,
Is there an spanish version for TyTN?.
Regards,
Taguapire.

Hi , i was wondering if there is way (something like a tutorial) that I can build my own language pack?
I have a Wizzard (Qtek 9100) with the original QTEK rom (in Greek) and I am trying to fit Faria's 3.2 ROM in my PPC but i Need Greek Language pack . Is there any way you can help me with that?
thanks in advance

new ROM
I tried to install your german language cab, but it doesn´t work. I got the new ROM from Faria ( http://forum.xda-developers.com/forumdisplay.php?f=259).
Now i donn´t know how to go on.....
Thanks for help

How to return to old windows mobile

Hi everybody , I have i-mate JASJAM with WM5 soon i'v upgraded to windows mobile diamond ,however I want to return to the old windows I mean the original one but I dont know how to do this , any help please??

Press Start -> Settings -> System -> Clear Storage, press enter to launch, you will be prompted to type "1234" and to press Enter. If you do this you will lose all contents and the Dash will be restored to its original configuration. It takes about 5 minutes for it do this and reboot.​

hold down the two soft keys and power the device on. Or you can also hold both soft buttons while pushing the stylus into the reset hole.

Not if mamadoharoona has updated the rom... Doing what DhaMajoR said will reset the Hermes to default BUT it uses the OS installed as the default. So, if you have flashed a new OS on your device you need to flash the WM05 stock rom to get that back, and good luck finding it...
Cheers...

Thank you DhaMajor , Ultramag69 is right the OS system does'nt change after applying your steps ,thats make me want to ask ULTRAMAG69 how can i flash the WM05 rom? I tried the same steps i have done with WM black diamond ,and the os still the same.
If you have any advice please tell me
Thank you for your interest

You need to find the WM05 flash file, good luck with that as they are as hard to find as hen's teeth if you didn't keep a copy of your original WM05 rom.
Make sure you have Hard SPL V7 on your Hermes and then flash the new rom. I use the sd card method as it seems safer to me, my opinion, and is REALLY easy.
1. Format 2Gb or less sd card FAT32. Copy .nbh file of new rom to it and rename to hermimg.nbh .
2. Put sd card into Hermes and reset Hermes into bootloader.
3. If 1st two steps done right, follow the prompts. If not, just reset to get out of bootloader, fix up what needs fixing and try again.
Cheers...

Thank you
Thank you very much

[Release] WM6.5.3 Build 28008 English by d-two

Well, I am back and I am glad to have some time to support the community again, updated the first post and i will flash the rom today and will be able to support this thread as well.
Windows Mobile 6.5.3 Beta English Rom 28008
V1.0
Download via Rapidshare.com
IMPORTANT! If a program can not be closed with the X, please use the OK hard key!
Included Programs:
- HTC USB to PC
- HTC Comm Manager (Replaced with an older Version)
- Device Information
- Microphon AGC
- Button lock Setting
- New Keyboard Layout
- X-Button (Programs close by clicking X, for minimizing tap and hold X, tap and hold the Start key for Taskmgr)
- Reconizer integrated!
- HTC Power
- HTC Advanced Netzwerk (For GPRS Settings)
- WMP replaced (By a better player! Plays everything!!)
- xdaShutdown (Down in the Taskbar!) IMPORTANT!!! Shutdown function has a Problem with the Touchscreen!! does not work for landscape mode
- FlightMode
- .NetCFcfg
- Keyboardbacklight
- WLAN Settings
- New Bluetooth Settings!
- New Telefon Settings!
- 16MB RamDisk
- WM Widgets compatibility (IE8 must be installed!)
FIX:
- SMS Alarm
- changed Start Menu
- XIP improved
- Alarm Sounds
- CHome changed
- Input Options
- GPS Option FIX New
- Provider FIX New
- Lan Option FIX New
Misc:
- Made with a new Kitchen (much better)
- SQM Dummy (not important)
- FWUPDATE Dummy (sends data to MS)
- I deleted some files for more space
- System Tweaks New
The ExtROM can be used for the new version!
Extrom 23081:
Download via Rapidshare.com
- Office (UPX)
- Pocket IE8 (UPX,FIX Zoom)
- MyPhone
- WM MarketPlace
- NetCF 3.5
More Windows Mobile Apps by request.
The Extrom is installed by putting the folder to the sd card. The installation starts automatically after a soft- or hard reset. The cfg.txt can be editted to personal use.

In correspondance with cosmicgate, i decided to post our guide on how to upgrade here, to avoid question further questions about that:
THESE INSTRUCTIONS ARE SUITABLE FOR WINDOWS XP COMPUTERS ONLY!!!
For people running WM5/6x but with 43MB of storage:
You have to downgrade to WM2003 and here's how to do that:
1. Download this Windows Mobile 2003 SE rom:
Download from Rapidshare
Download from Uploaded.to
and extract it to a folder of your choice.
2. Remove both the the SIM card and the sd card
3. Put the device into Bootloader Mode, pressing power+record and reset
4. your device display shows Serial v2.0x
5. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
6. Now let's start the actual Upgrade:
7. Navigate to the Upgrade folder
8. Start Maupgradeut_noid
9. If in the 2nd window the rom version is not shown, something went wrong, start over!
10. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
11. After it finishes perform a "WM2003 hard reset" by pressing power and reset
12. wait for the extrom to finish
13. now you can re-insert your sim and sd card (if you are planning to go on from here, you can also leave them out).
14. proceed with "For devices running wm2003"
For devices running wm2003:
1. Copy repart_doc.exe and the unlocker cab to the device and install the unlocker. In the start menu you will find a folder named "Extrom Tool".
2. Click "unhide" (if you are getting an error message, proceed with 2.a, else with 3.)
2.a the unlocker installs into the standard folder for program files, which depends on the rom language can be "\programme" or "\programmes" etc.
2.b the link in the start menu always points to "\program files"
2.c the easiest way, to solve that, is to rename your program files folder to "\program files"
2.d that destroys parts of the system, but doesn't matter because it is just needed for unlocking
2.e since now the link location should be correct, proceed with step 3.
3. Click "unlock", maybe a soft reset is needed.
4. Start repart_doc.exe
5. Set the future size, if not pre-entered, to 128kb (smallest possible partition size on this file system)
6. Click "Format now!"
7. Soft reset
8. Go back to the Extrom Tools
9. "Lock"
10. "Hide"
11. Now proceed with "Upgrading a WM5/6 device"
Upgrading a WM5/6 device
1. Remove both the the SIM card and the sd card
2. Put the device into Bootloader Mode, pressing power+record and reset
3. your device display shows Serial v2.0x
4. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
5. Now let's start the actual Upgrade:
5.a copy the downloaded nk.nbf to any given folder, let's call it Upgrade 28008
5.b copy the contents of this package to the same folder: MAupgradeUt_noID
5.c Start MAupgradeut_noID
6. If in the 2nd window the rom version is not shown, something went wrong, start over!
7. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
8. After finishing, take the device out of the cradle take out the battery and insert the SIM card
9. copy the EXTROM folder to the sd card and insert the sd card
10. Hard reset the device, pressing reset+power and record+camera and in the menu, that appears set:
Enable_Kitl: NO
Clean Registry Hive: YES
Format Storage: YES
using the camera and record buttons.
11. press the mail button to confirm your selection.
12. your device starts for the first time, you align the screen and let the extrom install, it soft resets and your device is ready to use

Special thanx to d tow and chef tony
I will try it.

Synchronization does not work Microsoft ActiveSync Thank you Chef_Tony

what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?

Chef_Tony said:
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Click to expand...
Click to collapse
Je bent echt geweldig werken nu
You are really great now working
Bedankt
Thank you Chef_Tony

I'm am also DLing now and will certainly give it a try. Great work and thank you both, D-two and Chef Tony.

Good work ;
It seems beautiful Rom
Many Thnx , Maybe I'll try it later
Best Regards.

great work..
how about input settings?

yes, i know that they are missing, i wrote d-two about that, i am missing them too.

hi good work
but there is missing in the contrast setting too.

hi d-two! i can't open wmp and set sounds & notification? why?

hi d-two! missing backlight slider

@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!

Chef_Tony said:
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Click to expand...
Click to collapse
ok Chef_ ,i waiting for final version

what about microphone icon in the system settings is it there

how to turn on backlight?
====
edit:
problem solved

aaraj said:
what about microphone icon in the system settings is it there
Click to expand...
Click to collapse
No, there is no Microphone AGC in the settings.
changed 1st post

when using Lanscape mode, and at the restart, the screen will return to Potrait with a touch screen that does not irregular like the R71's Xplode. but it was not my experience on the d-two ROM version 1 (WM6.5.1 build 23052). try to use the method Lanscape then restart, then you will experience it.
one again
about gprs icon

gotz said:
great work..
how about input settings?
Click to expand...
Click to collapse
This solved the input settings problem:
Remove the "Redirect" value under the following keys:
[HKEY_LOCAL_MACHINE\ControlPanel\Input]
Until now, it seems to be a very fast and stable ROM!! My congratulations on this D-two!! and my thanks to Chef_Tony.