Help:Smart Dialing don't work - JASJAR, XDA Exec, MDA Pro General

I update my MDA pro with this rom UNI_DOPOD_ASIA_130111_130230_11100_WWE.
And I don't install any cab in Extended rom.
But now smart dialing doesn't work.
In the dail pad,no drop list when push key, and when I push menu->Smart Dialing Options nothing happend.
How can I enable smart dialing again?
Need install something or just adjust setting?
I have tried this cab
SmartDialing_enable_0915_signed.CAB
from
http://forum.xda-developers.com/viewtopic.php?t=46836&highlight=smart+dialing
and nothing happend.
And I have tried SmartDialingWM5.cab from
http://forum.xda-developers.com/viewtopic.php?t=48917&highlight=smart+dialing.
But it seem that it is desgined for QVGA and doesn't work properly.

Got it.
After install this cab Default_MP_Enable_VT_RTPlugin_0727_2_signed.CAB in the Extended rom, it had been resolved

Related

Problem installing Smart Dialing

Hi, i'm from Spain (I don't speak english very well) and i've got a problem with my Imate Jam. After a Hard Reset, Smart dialing and other aplications didnt install. Then i tried to install Smart Dialing with a .cab file but i get the following error: The file \windows\iacontacts.dll are used or in ROM.
I tried to install it at the begining, but i get the same error.
can anybody help me please?
Thank you
nobody? I need to do a hard reset?
thanks
Hi, the messega that "\windows\iacontacts.dll is in use" indicates that the program is already installed and running. If not you can try the following:
- download memmaid (http://www.pocketgear.com/software_detail.asp?id=14279)
- install it, it offers control of autostart programs and services
- find and disable the entry that corresponds too iacontacts.dll
- soft reset and install
Or you can do (prolly easier):
- use a file manager to go into the windows dir and find that iacontacts.dll (prolly hidden so use something like Resco Explorer to see hidden files)
- you wont be able to delete it and you should not do it anyway
- but you can rename it to something like iacontactsold.dll
- softreset and install the cab file, it will not bother you now because the dll has not been loaded because it has not been found (you renamed it)
- you can then go into the win dir and should find your renamed dll as well as a new iacontacts.dll, delete your renamed one now
By the way: May I ask what Smart Dialling does anyway? I've not figured that out yet. Its installed on my S110 and I have options for that in the phone tool but no idea what it actually does or how it behaves when it is not installed.
Thank u very much! I followed the second way and i get it
With Smart Dialing for example: To call "Churri" (my girlfriend) you can write 248774 instead of 222-44-88-777-777-444. To find a number for example 99565856, you write 995 and Smart dialing find it automatically.
Thank you very much
Ah ok so you can use fragments of numbers until the right ones are picked out. Pretty neat. I'm happy it worked for you.

Smart Dial for Wizard???

I just got my new Wizard ([email protected]).
As I used Magician ([email protected]) before, there is a smart dial option for the phone.
I can make a call with "ONE Finger" but in my Wizard..I have to scroll all contacts to make a call.
Is Smart Dial option available in others e.g. Qtek, i-Mate...etc?
Can please help to extract this for me???
Many thanks
If you go in the ftp under uploads\kjam you can find the extended rom of this device (imate kjam) that support smart dialing. Inside the extended rom there is a file named Default_SmartDialing_enable_0915_signed.cab. Perhaps this help you.
thanks
BTW, what's the username and password for login ftp.xda-developers.com?
Or....would anyone can help to extract the files for me?
Thanks!!!!!!!!!!!!
Copy the files to your ppc and run then from within the ppc exporer,
then it will be installed, you don't need to extract anything.
I will send you the files tonight ;o)
Thanks guys!!!
I final got the files "Default_SmartDialing_enable_0915_signed.CAB" and install into my Wizard Chinese Version.
But there are no different and no way to enable SmartDialing.
Would anyone can have a screen capture on it or show me how to enable it.
I still need to search thru the whole contact to start a call.
Thanks
Could you please post the file cause i have the same problem on my i-mate k-jam
Thanks
If you have a KJAM you already have smart dial.
To enable smart dial you have to open the dialer (press green button) and then press right softkey to open the menu, the bottom selection is SMART DIALING OPTIONS that enable/disable the function.
Here is the smartdialing cab...I have installed in chinese Dopod 838 (K-Jam) and no effect
I just think the files seems too small...do anyone know is it enough for installing SmartDialing????
Hey, I'm also using Dopod838 Chinese... The quick dial is enabled by default... no need to do anything in addition. When you're in the phone applet, press your right softkey and select "快速撥號 (I)" can setup speed dial numbers. 8)
He's refering to Smart Dialing, not Speed Dial Tse... The file size is correct miko... How did you install it? Did you copy the cab file to your storage card or whatever and run it from there?
One thing I missed, is the O2 Dial Wizard on my IIs.. It let you edit the number before dialing and set carding card prefix etc.. Too bad it doesn't seem to work on WM5 or my Exec
I recommend on using Phoneplus which I realized is suitable for WM5.
I have tried the CAB file and it is not working, too.
Anyone successfully run Smart Dialing on Dopod 838? I miss this application very much! :roll:
I found the CAB file actually only activate the smart dialing, which does not contain any program file. The program files should already installed in the K-Jam default ROM.
So I think the smart dialing will be able to run in Dopod 838 by copying the following files from K-Jam devices:
- \windows\phcanhtc.dll
- DPadMenu.dll
Anyone can help? :wink:
This is the Smartdialing program i used for XDAIIs before, u can try to install it into the 838, please give result after try.
Thanks Vincentfung for the file. :wink:
I have tried to install the cab. However it doesn't work nor have any change to the dialer. I think it is for WM2003SE. So... we need the WM5 version of Smart Dialing that found in English K-Jam or English Dopod 838, or maybe Universal...
This one is on my device, and it should work ?
qtek9100 / Vario

Phone Pad and T9

After upgrading to the latest WWE rom, my phone pad does not use T9 anymore. I checked the manual to see if it was something simple like a setting got changed, but didn't find anything.
I assume the new rom still is supposed to have the T9 Phone pad?
I also cleared out the ext rom before a hard reset, so if it is a cab file for this, I may have deleted it in error
Anyone?

Cannot load custom SIP

Is there any way to fix the problem where my 818pro sometimes cannot load custom input methods? I have installed many different chinese sip like cestar and monster sip. All got the same problem. The only way to make it work again is to do a soft-reset....
ram not enough?
or crack version unstable?
hehe...
support original
something i discovered today..
Tried out blimkeys on my wm5 prophet..
initially didnt load/pop up..
however, i experiment by turning off all my today plugins..
and it worked when i tried to select blimkey sip method.
afterwhich i re enabled all my today plugin and the blimkey still worked..
a workaround, not a solution..
u may wanna try that.

Enable dailer?

I have a problem with a downloaded dailer from the wiki. The grey one (doesn't really matter)
A couple of days ago, I installed this dailer and everything works fine. This was after I ran some cabs from the Extended Rom.
Today I wanted to use the dailer after a hard-reset, but I don't want the cabs from the external rom installed (so I soft-reset before customization).
But now the dailer doesn't work.
I guess it needs to be enabled?
Anybody who can use the dailer without the need of installing cabs from external rom?
Hmm, I should have tried more.
When I install the T-Mobile dailer from the wiki, and after that the Tytn Grey dailer, it works.
Isn't it possible to update the Tytn dailers, so that they are enabled after install? Or am I missing something?

Categories

Resources