Related
Hello All,
I seem to be having a problem with the Flight Mode setting. My phone goes through stages of complaining about the flight mode repeatedly. It keeps asking me to turn off the flight mode when I try to use tomtom or enable bluetooth, but flight mode is not on. This is starting to get very tedious and I am not sure what is wrong. Has anyone else experienced this problem?
Cheers,
Matt
@,
i had the same problem using mponeschedule.
Installed microsoft.NET compact framework 1.0 sp3 for ppc and the symptoms disappeared.
Cheers
matmil said:
Hello All,
I seem to be having a problem with the Flight Mode setting. My phone goes through stages of complaining about the flight mode repeatedly. It keeps asking me to turn off the flight mode when I try to use tomtom or enable bluetooth, but flight mode is not on. This is starting to get very tedious and I am not sure what is wrong. Has anyone else experienced this problem?
Cheers,
Matt
Click to expand...
Click to collapse
It could be that you are experiencing a similar problem to me. You don't have a Qtek S100/S110 with similar firmware to me do you (please see my sig). If you do then there seems to be a problem with the interaction between bluetooth and flightmode in that ROM.
The way I fixed it was to use the very good (and free) PPCProfiles-Pro which can be found on the www.modaco.com site.
This is phone profile software. I've got 3 of the profiles set as follows:
1. Radio on / bluetooth on - when I'm in the car
2. Radio off / bluetooth on - when I'm hiking with my GPS
3. Radio off / bluetooth off.
As long as you don't turn the radio off by using the standard flight mode method you should stop getting the annoying messages.
i have the same problem i made HR Now everythin good
thormdac said:
@,
i had the same problem using mponeschedule.
Installed microsoft.NET compact framework 1.0 sp3 for ppc and the symptoms disappeared.
Cheers
Click to expand...
Click to collapse
It's not only that rom with these symptoms. I got TMO 1.13 & after installing profilers it appeared for the first time. I've got the latest .net as well & it doesn't help a bit. Maybe I need to reinstall it to fix some screw-ups. Apperently the radio can come in some sort of inconclusive state claiming flight-mode should be switched off, when it's not. I even managed to have BT on, while I was in flightmode.
M
I am having the same problem with i-mate JAM ROM:1.12.00 WWE and Radio V:1.12.10.
It happens when I change my profile to Bluetooth using PhoneAlarm V1.30.01. My workaround is to remove my bluetooth device and re-add it. This makes the message to disappear but after some days it comes back. It should be related to a sequence of keystrokes or something..
I had the "turn off flight mode" problem the other day. It took ages trying to stop it from happening, even after a soft reset!
In that particular case I think it was because I used a btcicle program to turn on bluetooth rather than doing it from PPCProfiles-Pro.
My advice to people is that if they use PPCProfiles-Pro to do this then don't use any other program to turn BT on or off and don't use the Microsoft flightmode either as the magician seems to get thoroughly confused. Set up your profiles so that you can do what you want just by switching profile in PPCProfiles-Pro.
Note. I tried PhoneAlarm a while back but that didn't work properly on my machine.
Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!
moghisi101 said:
Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!
Click to expand...
Click to collapse
Thanks moghisi101, I tried the fix. In my particular ROM (a Qtek) the IsFMCheckEnable doesn't exist so I added it in. Thought it was working but I got the old "Turn off flight mode" mesage yesterday. It's definately a problem with my ROM. It took me about 5 attempts to get bluetooth turned on.
So, in my earlier post when I said:
"As long as you don't turn the radio off by using the standard flight mode method you should stop getting the annoying messages."
it seems I was wrong. It doesn't matter how you try to turn on bluetooth, if you have this ROM on a Qtek, you are gonna get that message from time to time.
Thing is the rest of the pocketPC works great (for the most part) so I guess I'll just put up with it.
moghisi101 said:
Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!
Click to expand...
Click to collapse
On my MDA Compact it works
thx
szymcio said:
moghisi101 said:
Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!
Click to expand...
Click to collapse
On my MDA Compact it works
thx
Click to expand...
Click to collapse
In my case it doesn`t work!!!
I solved this problem in my oun way,
just rename Phone.lnk into TPhone.lnk ,path to anywhere.
& nothing control radio even without soft reset
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\FlightMode]
"PhoneLocalizedName"="Phone.lnk"
Hi
i want try skype...
But what version i must download?
In the skype site i have found all pda Marches but not HTC.
Can i download ->other PPC->Skype per CPU 312 MHz???
thx
I downloaded the normal (>312Mhz) version and works fine on my TyTN.
i Pof
i'll try it..
But just another question it's important do this tweak
Get skype to work without overclocking and increase general Skype performance: "HKEY_LOCAL_MACHINE\SOFTWARE\Skype\Phone\Audio" Change "?DisableCodecs" to "ILBC G729 EG711U"
Click to expand...
Click to collapse
??????
Thx
mmm... never heared of that. I checked my registry and I have the key but with empty value. YMMV but it runs just fine without any tweaks if you use the USB headset.
ok ill try without tewaks...
I would recommend this..
http://skype.com/download/skype/mobile/21beta.html
works just fine on my TyTN without any tweaks or so
Anyone know when it is going for full release?
Chris The Ninja Pirate said:
Anyone know when it is going for full release?
Click to expand...
Click to collapse
Hi Chris,
Check the Skype page beginning of October.
Cheers,
StonyA
I installed Skype on my TyTn last night, and used it over wifi to call my Dad (just because I was bored and wanted to try it), I made no tweaks or changes and it works fine. I just chose Other Pocket PC and did an OTA install with the CAB file. Works great.
which skype brand - model for hermes
I took a guess and chose Dopod 700 version.
So far seems to work fine.
voice over EDGE sucks, but we knew that.
/PhM
one question from a future user:
- can i make voip calls with a BT connection with a PC?
tks
What do you mean by making VoIP calls with a BT conn with a PC?
gravejoker said:
What do you mean by making VoIP calls with a BT conn with a PC?
Click to expand...
Click to collapse
I mean, with a bluetoth connection to a PC is possible to make calls with skype or voipbuster?
cakemen said:
I mean, with a bluetoth connection to a PC is possible to make calls with skype or voipbuster?
Click to expand...
Click to collapse
What would you be connecting to the bluetooth signal coming out of the pc?
stpete111 said:
What would you be connecting to the bluetooth signal coming out of the pc?
Click to expand...
Click to collapse
The HTC TyTN with SJphone or other.
my GPS isn't working after hard reset, it cant detect any satellites..i ran quick gps, but nothing...hard reset again..and nothing...any idea?? running tomtom 7.916.9189.1..
judicious said:
my GPS isn't working after hard reset, it cant detect any satellites..i ran quick gps, but nothing...hard reset again..and nothing...any idea?? running tomtom 7.916.9189.1..
Click to expand...
Click to collapse
Wait a long time before hard reset... Because it's new positioning for the GPS. Be sure that the place where you search the GPS is optimal for the first reception.
What is your SW version (Radio, rom,...)?
ROM: Fusion V5.2 Sense 2.1
Radio: 4.49.25.17'
it's weird because sometime it works when after hard reset and sometimes it doesn't
Having just started a new job where I am reliant on Sat Nav I must say I think the Sat Nav is absolutey ****ing terrible on this device. So much so that I'm forced to use my old Kaiser to find my way to clients.
If I'd known that I probably wouldn't have bothered buying this.
I know that doesn't help you, but when I saw this thread I just felt like a rant.
Hope you get it working again, as well as it can.
i run quick GPS before i run my gps app... and the new or latest radio helps as well..
Just put it by the window and wait upto 15 minutes. Both my Rhodium and my previous Kaiser always take ~10 minutes to get a lock the first time after a hard reset (even with QuickGPS). I don't know why, but it would seem it's quite normal so don't worry about it. If you're still not getting a signal after 15 minutes then head outside with no tall buildings and try again.
My touch pro 2 GPS sensor seems really sensitive to open sky. It can't pick up any satellite at all indoors.
i'm having the same problem! its weird and sorta annoying.
i have the latest Energy ROM Standard 21864 with the radio 4.49.25.17
can someone help with this problem?
Visual GPSce still works on the TP2, Tilt, WM 6.5.
http://www.visualgps.net/VisualGPSce/
It won't fix your problem, per se. But you can see if you are at least picking up satellites, and how well.
Connection settings in Visual GPSce are COM4, 4800 baud.
The most common problem for the GPS not working after a hard rest is "location on" settings. You must have your device set to LOCATION ON and not E911 ONLY.
go to START
click on SETTINGS
at the bottom click on ALL SETTINGS
at the bottom select tab PERSONAL
click PHONE
at the bottom select tab CDMA SERVICES
highlight LOCATION SETTINGS
click on GET SETTINGS
change to LOCATION ON
upper right select OK
Hope this was your problem and helps. Thanks
have you tried Advance Config Tool to make sure agps is enabled?
I enabled mine and get fast GPS locks, especially outdoors.
Just did a reset and got a GPS lock in 19 sec. while sitting in my room. It one if the thing a love about the Tilt 2 over my original Tilt.
DJ_SirG said:
The most common problem for the GPS not working after a hard rest is "location on" settings. You must have your device set to LOCATION ON and not E911 ONLY.
go to START
click on SETTINGS
at the bottom click on ALL SETTINGS
at the bottom select tab PERSONAL
click PHONE
at the bottom select tab CDMA SERVICES
highlight LOCATION SETTINGS
click on GET SETTINGS
change to LOCATION ON
upper right select OK
Hope this was your problem and helps. Thanks
Click to expand...
Click to collapse
i have tilt 2, and do not see any tab for cdma services or locatioin settings...not sure how to get to there..
judicious said:
i have tilt 2, and do not see any tab for cdma services or locatioin settings...not sure how to get to there..
Click to expand...
Click to collapse
same my phone is not cdma but my quick GPS says my location must be ON ?!?!?!?!?!?! how is that?
These threads helped me a lot. Turned my Tilt 2 from a crummy GPS to an acceptable alternative to a dedicated GPS device.
http://forum.xda-developers.com/showthread.php?t=524655
http://forum.xda-developers.com/showthread.php?t=523676
thanks..will post if anything crazy happen..
HKLM\System\CurrentControlSet\GPS Intermediate Driver\
Deleted Data for current and old log files
HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers\
InputBufferSize dropped to 1024 (DEC)
OutputBufferSize dropped to 1024 (DEC)
HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers\GPSOneDevice\
PollInterval dropped to 100 (DEC) this is MilliSeconds
Click to expand...
Click to collapse
I saw that in thte post...i wasn't able to do the first one...didn't quite get it..but tweaked with the other two..
This worked for me... can't believe I didn't think to check this. LOL. Thanks for the help!
DJ_SirG said:
The most common problem for the GPS not working after a hard rest is "location on" settings. You must have your device set to LOCATION ON and not E911 ONLY.
go to START
click on SETTINGS
at the bottom click on ALL SETTINGS
at the bottom select tab PERSONAL
click PHONE
at the bottom select tab CDMA SERVICES
highlight LOCATION SETTINGS
click on GET SETTINGS
change to LOCATION ON
upper right select OK
Hope this was your problem and helps. Thanks
Click to expand...
Click to collapse
Check this Out
judicious said:
thanks..will post if anything crazy happen..
I saw that in thte post...i wasn't able to do the first one...didn't quite get it..but tweaked with the other two..
Click to expand...
Click to collapse
I have another thread similar to yours, and I just solved my satellite problem.
there is a setting in your advanced network settings under the GPRS tab, one can choose from two options, either PAP or CHAP for connections settings. Mine was set to CHAP, I then changed it to PAP and biggity bam, the motherf***er worked. I also, tried different radios, but am fairly sure this was what fixed the problem. Give it a shot, maybe it will work for you too.
my gps also don't work since i have installed new rom on the phone. when i open camera and choose gps photo all i see s initializing gps but the process never ends.
Any luck yet
Haven't heard whether or not there has been luck trying my suggestion. I'm curious to see if anything came of it.
outerdepth said:
I have another thread similar to yours, and I just solved my satellite problem.
there is a setting in your advanced network settings under the GPRS tab, one can choose from two options, either PAP or CHAP for connections settings. Mine was set to CHAP, I then changed it to PAP and biggity bam, the motherf***er worked. I also, tried different radios, but am fairly sure this was what fixed the problem. Give it a shot, maybe it will work for you too.
Click to expand...
Click to collapse
GPS has zero to do with your GPRS settings.
Hey guys, wonder if anyone could help me out here.
Just recently, my Myphone program on my HD2 won't connect to the microsoft servers. When i try to connect, it says theres no connection or there's a connection problem, even though my wifi or 3g connection is fine.
I've tried uninstalling and reinstalling the cab, and now its stuck on the screen saying 'signing onto the myphone service.
Would just like to get this working again before i reflash my phone to the new 1.66 rom so i can retain the messages i have on this computer.
Any help would be appreciated.
David.
Oh yeah, if anyone was wondering, i'm currently running the 1.48 wwe europe rom.
same here my phone does not log in. is there a registry tweak or a patch?
bungfritz said:
Hey guys, wonder if anyone could help me out here.
Just recently, my Myphone program on my HD2 won't connect to the microsoft servers. When i try to connect, it says theres no connection or there's a connection problem, even though my wifi or 3g connection is fine.
I've tried uninstalling and reinstalling the cab, and now its stuck on the screen saying 'signing onto the myphone service.
Would just like to get this working again before i reflash my phone to the new 1.66 rom so i can retain the messages i have on this computer.
Any help would be appreciated.
David.
Oh yeah, if anyone was wondering, i'm currently running the 1.48 wwe europe rom.
Click to expand...
Click to collapse
Personally, I've never had an issue with MyPhone, apart from the occassional service down type issues, but I've been using it for about 8 months now, and that's only happened a few times.
Since you said you can use it over wifi, can you not just do that so you've at least got an up-to-date backup before you flash?
I had this issue the other day. Turns out my clock was set to the wrong date/time. Once I set the correct time, I could log in fine.
Blade0rz said:
I had this issue the other day. Turns out my clock was set to the wrong date/time. Once I set the correct time, I could log in fine.
Click to expand...
Click to collapse
So what do you mean by the date /time was set wrong? If itsin regards to what day it is and the right date, mine is currently set to the right times at the moment.
Time/Data stamping is very important to a lot of things to function correctly. MyPhone is one of them.
Just sync your time via the internet sync and try it again. I have used this service for some time now as a few others and I have not had more than an occasional server is down messages.
Don't set your time manually do it via internet/air.
bungfritz said:
So what do you mean by the date /time was set wrong? If itsin regards to what day it is and the right date, mine is currently set to the right times at the moment.
Click to expand...
Click to collapse
Have you downloaded the latest MyPhone from:
http://myphone.microsoft.com/install
Also, connecting to 3G before launching MyPhone may help
Blade0rz said:
Have you downloaded the latest MyPhone from:
http://myphone.microsoft.com/install
Also, connecting to 3G before launching MyPhone may help
Click to expand...
Click to collapse
Tried everything that has been suggested but still no good.
Upon closer inspection, it seems when u try to logon, the program does not even seem to even access the data connection, whether it is through WiFi or with an active 3g data connection running. it usually jumps straight onto the error screen or just gets stuck on the logging in screen without any result.
So does anyone think it might be caused due to some registry setting preventing the program from using the connection ?
Getting really fustrated with all this at the moment.
sorry to dig up this old post, but i am having the same situation, did you get it solved? how?
Edit: Found on another forum that connecting thought activesync the first fixes this, it worked.
have you tried re-entering your username/password?
Richy99 said:
have you tried re-entering your username/password?
Click to expand...
Click to collapse
yup, no luck. only works via activesync!
AthenaLod said:
yup, no luck. only works via activesync!
Click to expand...
Click to collapse
I know this might be redundant question but have you checked your date and time to see if it is correct like suggested previously in this thread. Personaly the date and time somehow getting changed to the wrong date and time is the only reason I have ever bad trouble with Micosoft My Pbone.
yup, both are accurate.
i have an i8000 with WM6.5. everything works perfectly beside GPS - i can't lock to any satellite with any GPS software. i've tried and installed numerous fixes, registry fixes and changing options in some service menu (i know that there was an option XTRA). nothing helped, all i got was a huge battery drain. i guess the only thing left is try flash radio. may i just reflash that rom component, may i use any version available, and is there a specific one you'd recommend?
thanks in advance
Same gps problem
pike888 said:
i have an i8000 with WM6.5. everything works perfectly beside GPS - i can't lock to any satellite with any GPS software. i've tried and installed numerous fixes, registry fixes and changing options in some service menu (i know that there was an option XTRA). nothing helped, all i got was a huge battery drain. i guess the only thing left is try flash radio. may i just reflash that rom component, may i use any version available, and is there a specific one you'd recommend?
thanks in advance
Click to expand...
Click to collapse
could you find a solution?
same problem
bruckpeter said:
could you find a solution?
Click to expand...
Click to collapse
same problem...
please help
wm gps solution
FiliPop said:
same problem...
please help
Click to expand...
Click to collapse
check here http://www.modaco.com/topic/319451-gps-fix-for-i8000-new/page__st__180#entry2125200 for solution