I opened my Htc uni to find a Grey blob in the top left conner (landscape mode). when the backlight is off it looks fine except that its really hard to see the screen.lol. so i don't think it's lcd bit of the screen.
oh and if looked at the right way it is posable to the screen but only just.
any idea's short of buying a new screen would be great. thanks guys.
Any thing at all freeze it. spin it in a upwards wards fashion.
i will try any thing. or even just where i might get a "cheep" replacement.
ps i think its getting worse.
oh and i think i know what happened
got into my sisters car and couldn't fit (the seat is pulled all the way forward)
and i think it was the getting squashed agents the staring wheel that did it.
Related
My touch screen has been getting out of alignment quite often. 3 or 4 times a day. I'll go to use it after leaving it on standby, and the touch screen alignment will be off by a half centimeter or more. its making very difficult to use. Sometimes very difficult to even get to the settings screen to realign it. I'm using a screen protector and to use my fingers instead of the stylus often. could have of this be having an affect? or does anyone have any idea whats goign on? thank you for any help you can give me.
Dan
I had a similar problem as well. Its kinda scary. Do you think its a software error? or could it be hardware *gulp*
I had this problem with some devices I issued out at work. I put screen protectors on them, and all kind of weirdness happened, and the screen getting out of alignment was one of them. I removed the screen protectors, and the problem went away.
Wizard platform has often that claim from many users. I'm not sure if working without screen protector is suitable for you and don't know it will help. In my case it did not.
The problem of kJAMs is related to the screens HTC used on this version. Unfortunately there is not software remedy. Some users attempted to change their devices under guarantee. Some are telling newer ROMs make the error less frequently.
You may also use "fire button + messaging button" combination as a shortcut to screen alignment page if you must live with this. Better than nothing ?!
fixed my qtek 9100
Well my wizard used to go out of alignment a lot. But I basically ruined it when I stuck it in my golf bag one day and let it get partially crushed while half-open...
The screen started to flicker a lot (in addition to not registering touch inputs). after a week it was unusable except by me since I knew where to push to get it to work.
Anyways, I gave up and asked around Hong Kong for people who can fix these PDAs. I found a store that offered to bring it to a specialist (no name given) for $380 hkd (~$50USD). Figured I had nothing to lose.
It actually works almost like new now. The slider is tighter, and the screen doesn't go out of alignment at all. I'd almost say its perfect except the "specialist" "broke" my volume slider when fixing it. Its not major so I decided against taking it back to the store for further repairs (3 month warranty on their work). But it took 3-4 days for them to fix.
I figure someone with the screwdrivers and stuff can probably fix your problem. But I didn't have the guts to try it myself...
Four things you can do to help
1. After time dust etc... gets under the rim of the screen and adds to the misalignment problem. Get a piece of paper and put the corner under the rim and get all the dirt out.
2. Sometimes software causes the misalignment - in my case it was using vjtoggletoday - so check or your software particular ones that change your today screen e.g. wisbar etc...
3. You could do a hard reset and try device in factory state for a while to see if it is a software or hard ware problem
4. Update to the latest rom.
Thanks for your help guys. Even though i didn't like your answers. I tried cleaning dust from under the border of the screen. It worked well for now. but it hasn't been more than 12 hours. I hope it continues. If i cant get it to stop i might have to sell my phone on ebay. they seem to go for only 50 dollars less on ebay than i payed for it in the first place. I hate to ask this question. but what could i replace this phone wiht that wont have this problem. and has windows? Basically what would you suggest as a replacement. And not the TytTn because i dont think i'll be able to afford that one.
Thank you.
lets hope that i dont have to fish dust out of my phone every day.
I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs! I'll soft-reset and sometimes it wont boot up, it just hangs at the windows logo screen. I upgraded the ROM to the newest from Cingular thinking it was some program that was doing it, but it comes back.
When it's in portrait mode, it's the upper right hand corner. When it's in landscape, it clicks the start button(upper left) so I dont think its a program thats making it click, but something physical touching that certain spot. Anyone have any idea?! I thought something was stuck in there but it's clean.. this is so annoying, I cant even make a call since it clicks exit when it comes up! It stops SOMETIMES for a few minutes but then it comes back after a while.. anyone else?
Give it a yung choo kung foo whack, take a run-up.
...
Sounds knackered, you could try the screen alignment fix, pressure from the gasket may be causing this:
http://wiki.xda-developers.com/index.php?pagename=How to fix the Screen Aligment issue
Your best bet is to send it back for repair though .
I bought it off ebay.. so no warranty
It's weird because I take a very slim credit card( 1/2 the thickness as regular cards) and slide it in and bring up the plastic around the screen and it STILL does it!! nothing is touching the screen at all. Also, my alignment is still spot on perfect.. what gives?
Oh yeah, I did smack it a few times and it works sometimes.. It's been okay right now for about an hour but I know it's going to be short lived..
Did you try loosening the screws?
MilanoRex said:
I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs!
Click to expand...
Click to collapse
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel
tadzio said:
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel
Click to expand...
Click to collapse
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.
Your case is putting pressure on that part of your screen. It is not device specific. Slip a piece of paper under the case to check for clearance. I use under the case screen protectors and have seen this before. You may be able to simple pry the case and create some clearance.
I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated
MilanoRex said:
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.
Click to expand...
Click to collapse
The iPhone? You're going to actually exchange this beautiful piece of full-fledged mini-computer &phone in one goodness for an iPhone? Note: This was not meant to flame anything or anybody. If you feel that I have, I deeply apologise.
jotham said:
I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated
Click to expand...
Click to collapse
I've inserted a small piece of plastic between the frame and the screen (one month ago).
Here you will find a resume of proposed working solutions
http://forum.xda-developers.com/showpost.php?p=1056346&postcount=227
Can you tell us the serial of your Hermes? (HTC62xxxxx, 63, 64)
That is the same problem I had with my 8525. I tried ALL the solutions here in the forum but nothing solved it. I finally returned it to Cingular and they gave me a brand new one with zero hassle. Two weeks in on the new one, and it's working like a champ (knock on wood).
the S/N is HT657xxxx
Nothing is putting pressure on the screen, I've pried some clearence between that part of the screen and it still does it. I dont even have a Cingular account, so I doubt they'd help me
My only other option is to take it apart(following the japanese website instructions) and see what's going on.. Maybe something underneath the screen is doing it? I dont know..
Oh yeah, not only did i loosen the screws behind the screen but I completely removed them and it STILL does it. I found the registry setting for screen sensitivity and lowered it from 7,xxxx to 5,xxx and it did nothing..
help needed
my digitizer appears to be on the way out, the touch screen alignment keeps shifting for no good reason, it used to do it only when i rotated the screen but now it even happens when i keep it in portrait only.
Also, right after i turn the uni on the touch screen won`t work for atleast a couple the seconds, no clicking noise and no indication i am touching it all.
The problem is getting worse with time.
Any thoughts/advice will be much appreciated.
same for me.
doesnt happen when i switch from portrait to landscape, but the alignment keeps getting messed up.
i'm thinking of opening the screen part, maybe i'll tighten the lcd and screws inside or something...
shlomki said:
same for me.
doesnt happen when i switch from portrait to landscape, but the alignment keeps getting messed up.
i'm thinking of opening the screen part, maybe i'll tighten the lcd and screws inside or something...
Click to expand...
Click to collapse
great..... do that now, and get back to me right away ....
davieshyland said:
great..... do that now, and get back to me right away ....
Click to expand...
Click to collapse
i did it just now. tightend screws, made the connectors sit properly, cleaned the edges of the screen a bit...
lets hope it will make a difference.
Bump. Any joy?
i gave in and ordered a new touch screen from ebay, £11 inc p&p, can`t argue with that.....
screen not arrived yet..... but the problems i was having seem to have gone away ?.
i`ve just flashed a different ROM, (although it was one i`d flashed before), and the problems i was having are gone, very weird.
this wasn`t the first time i`d re-flashed since the problem came up, and i`ve re-loaded all the same software i had when i was getting digitizer drift.
i will probably re-place the screen (when it comes ) anyway, but.....lets hear it for faults that fix them-selves.
pasan said:
Bump. Any joy?
Click to expand...
Click to collapse
Seems so!!
im on the 10th day without ANY problems! screen alignment is accurate and STAYS that way!
im happy so far. maybe you should try it also...
The protective cover on my front camera has disappeared! Given that I haven't even dropped the phone, this is vaguely annoying! I'm sure it won't come to much harm, but anyone know where I can find another?
My Ameo is now getting WM6; for some reason it went into a mad rebooting cycle lately and refused to work reliably before, eventually, locking up entirely. Attempting to access messages or similar resulted in a locked-up phone with spinning progress wheel.
Very annoyed about that, it's going to take ages to get it all the way I liked it.
spooky mine has also disappeared. Have only dropped mine twice. Both on the same eve (excess alcohol). Although hammered asssumed that i would have noticed things flying off.
http://www.bichonhotel.co.uk
oh wow... i hadn't noticed my lens was missing until after new year's eve also... my phone was perfectly fine on the eve of, but i guess a little too much Patron had something to do with that...
Same for me, I don`t know when. Thinking of going to a glazier to see if they can cut a small pice of glass.
BTW, I have also lost the small rubber thing on the joystick but this I have repaired with the eraser from a pencil (the one with lead) Cut the top of and glued it on the joystick.
Regards
Hans
Hello,
The left side of the screen shows some Missingno type glitching (I've attached some pics)
Does anyone know where this type of problem comes from?
I had the screen replaced and it worked beautifully afterwards for a couple of days...
I also installed system updates.. so I'm wondering; is this a hardware or software issue?
Thanks for your time and interest
/Shady69
Happened to my wife. Needed to be returned and fixed, hardware glitch not software. I am not sure if it was a screen issue or some other hardware.
Sent from my XT1575 using Tapatalk
Did you have the screen replaced because of the screen flashing, or did the flashes start only after you had the screen replaced?
If the problem has been consistent over the course of two different screens, it would point towards a hardware fault on the sending end of the display connector, right where the ribbons leave the motherboard.
If this problem is brand-new, it might just be that the display connector was not fully secured when the new screen was installed.
Mine is doing the exact same thing. Left side goes all grey and static looking.
I took it apart and reseated the screen ribbon connector and at first I thought it made a difference, but now it continues to glitch out. I took it apart a second time and it has the half screen right at boot up. Sometimes it goes away just setting on the desk but seems to come back regularly. Its only the visual part of the screen, the touch points are still all in the same locations. And when I took a screen shot while it was glitching, the screen shot came out normal. So I am hoping its only the screen/digitizer that is going bad.
I am going to buy a new screen and see if that fixes it. Its only $60 on eBay and its pretty simple to take apart. I will post back if it fixes the problem. That way if someone else has the issue they will know.
Moto x style display problem
I have got the similar problems with display and I will return for warranty repair. I will tell you later what happened.
Downgrade to Lollipop , It worked for me.!
...
(This is the tip for everyone)
I replaced the screen and that seems to have fixed it for now. I haven't had much chance to use it since the screen replacement though. I will update in the next week or so and let everyone know how the screen replacement holds up.
The replacement screen only lasted about a week and now the righthand side has glitched out. I am going to take it apart and put it back together but i think its time for a new phone.
These phone are getting cheap and I really like it so I may just get another. Although the lure of a dual sim version is attractive.