Dear everybody,
I have also killed my 2 day old MDA compact 3 by using the PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe (Feel really frustrated about it)
It will not load windows only
IPL 1.13.0001
SPL 1.13.0001
GSM 02.49.90
OS 1.28.0.0
I've tried a lot but nothing has worked so far. Now my last resort is using XDA tools to make a bootable sd card.
Is there anyone who make a file that the artemis can use of an SD card?
I would be very much obliged!
did you do CID unlock before installing new ROM?
CID unlock is not required for flashing the PDAMobiz Powermap 1.1.2 ROM. Just make sure you follow the right instructions. I did it and you can find it here:
http://forum.xda-developers.com/showthread.php?t=294830&page=2
But make sure that you have synced your Outlook data on desktop as there is something wrong with restoring from backup file the PIM related info (I use Spb Backup, but seems it is same with any backup application)
http://forum.xda-developers.com/showthread.php?t=295295
more info.
ianvanhaaren:
1. Please provide more info what exactly happens when you try to turn on your device.
2. What type of error you have when you try to re-flash device? At what percent it stops.
3. Connect device to USB, disable USB connection in activesync. Start mtty console, choose USB type connection (mtty attached, in case you need it).
4. type set 32 in console. send this output.
If CID area on device is corrupted, for the moment only imei-check who knows how to re-calculate this area. Even so, if device won't boot in windows it will not help. You need to connect to device thru jtag interface, in order to load modified spl into ram and perform writing into security area, to recover it. Imei-check says, they know jtag for Artemis.
It may cost you a bit of money.
If you have an option to send it to service center, do it. It would be your best choice.
Regards.
Related
Hi,
I was upgrading the software upgarde on my device. I successfully upgraded the Pocket PC software on the O2 XDA, but when I tried to upgrade the GSM radio/GPRS software of the O2 XDa, it gave some error and after this my device is not starting at all. The only mistake I did was that "I did not remove the SIM card before upgrading the GSM radio/GPRS software" The device does not start even after cold booting the same. When I start the device, the O2 screen comes and after a quite long time the main window does come but I cannot do anything. I tried to tap on contacts, time, tasks but nothing happens. I can see the windows logo wall paper but cannot do anything. Please help on how I can restore back my O2 as a cold reset also does not work. :?
Thanks and Regards
Jinesh
There's many topics about your question in the forum. Search it! Try to search with this keywords: 1% error, repair.zip
There's many topics about your question in the forum. Search it! Try to search with this keywords: 1% error, repair.zip
Hi,
I have tried all the available options but it still does not work. To restore the ROM how do I get access to the O2 cause niether serial nor USB is detecting it.
Please help.
regards
Jinesh
SD card install guide
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
Thanks Chief, I will try out and let you know.
regards
Jinesh
Hi Rudegar,
I tried the procedure given by you. I was able to write to the flash successfully. After writing to the flash it gave a message "Checksum OK, Please cold reboot to reset".
I did a cold reboot. After starting the O2, it showed the O2 logo screen and after quite a long time, it asked me wether I want to format the SD card or not. After that it took me to the default screen of XDA wher eit showed options like "Add today's date, Contacts, Schedule etc etc. but upon tapping any of the options the O2 behaves erratically. If I tap on today's date it takes me somewhere else. Inshort it does not work.
I again did a cold reboot and now the device is in its original position i.e not going after the O2 logo where it gets stuck up.
One thing I would like to mention is that all these activities have been done putting the O2 on the cardle only as the battery is totally discharged and the device turns on only after putting it on cradle. Even after the cold reboot it does not start unless I put it on the cradle whichis connected to the mains. Is it Ok with this or am I doing something wrong? The battery does not charge and hence I have to do it in this way.
Please suggest what wrong am I doing? Any suggestions from anyone will be welcome.
regards
Jinesh
Hi,
Someone posted the original O2 ROM on this site and I downloaded the same after which I was partially succesful in flashing the ROM and reviving my dead O2 back to half life. :roll:
I burned the ROM on
to my SD Card and flashed the ROM on to my O2. After
successfully flashing the ROM I rebooted the device.
The device now starts Windows but it takes atleast 15
minutes to start. I get the today screen. WHen I cick
on start the start menu appears after a delay of 10
seconds and all applications run normal, however all
this happens only on the Cradle only.
When I go into the Battery Settings it shows "Battery
Status Unknown".
Also none of the phone functions work. The SIM card is
not recognized and in device information it does
dispaly the "IMEI number" and the "Protocl Version"
I am only able to use inbuilt phone applications.
Is there some problem with my battery cause it is not
charging even on the cradle.
Device Information does not show Radio Version, Protocl Version & IMEI number at all.
Can anyone please help me?
hello all,
it means that your radio stack are dead. Currently, We don't have any real method to fix this problem. When the radio stack is error, you can not upgrade it or do anything to make it work. We can only upgrade or downgrade the radio stack if it works. Also if you try to upgrade the radio stack, we realy need to flash the chip using a speceial tool or need the sd card which build in radio stack with we can only flash in bootloaading mode. Howerver, in some case, we can fix it but .... I think it is just lucky or the xda error when battery problem.... in this case, just disconnect the battery few minutes and connect it again by pressing the battery hole.
Regards,
Hoanghon
p.s. I have dead xda. I killed it when I upgraded the RADIO STACK. Therefore, if you are really need to upgrade the radio stack, I recommend use the official upgrade for secuirity. or just upgrade the rom only.
Note:
To eliminating the error, you need to upgrade the rom or the radio stack, you need to check if the rom fix the radio stack or the stack you are trying to upgrade it fix the rom or not.(ie, Tmobile Rom have to use it radio stack built for Tmobile pocket pc...... I know that in some case when we mix between the radio stack and OS it works but I don't think it work propertly. Anyhow the mixing bettween radio stack and OS is very dangerous if it doesn't suppport then you have to reflash the radio stack or rom(the OS is Okay but the keep upgrading the radio stack may cause the radio stack killed)
WE NEED SERIAL CABLE FOR PDA ANY HELP PLS!!!
Hi Jineshd we
have the same problem and we are sure that the only way is to do SD uptade
and U said U have a serial cable to Yours device. With that we can be able to download flash gsm rom from working device and put it back via SD card to ours. Pls tell me where can I get a serial cable or some schema how to prepare it and I will try to repair ours dead pdas. Its our only chance
rgds
Lukasz
Hi,
Thanks all for the replies.
Can anyone tell me how doI repair the radio stack?
Regards
Jinesh
no way without having special RSU rom update on SD card and run it from bootloader or dissembling the device and reprograming GSM rom on special rom/bios programing socket. (Here on forum is user Cgigate from Toronto CA who can do it but I cant contact him)
Help,
Is there a way to get the OS and boot img for my o2 XDA to put on my SD card so i can recover it?
I'm stuck on the boot-loader screen (version 5.22) i can not use active sync as it comes up as unrecognized device, im at my wits end, i just want to get my phone working again. is there any place i can get the O2 ROM file from? or anything that can be done, or do i have a useless brick now?
i tried upgrading with the developers ROM using the auto install, it got to the "it will take 5 mins to upgrade" screen then active sync lost connection, there was nothing showing in the progress bar, when i tried to restart, active sync could not connect. now im stuck with the boot-loader menu after a soft reset.
Sorry for the double post,
Right sorted the problem out, got a cooked ROM from a different site as no link i clicked on here was still active.
I found out that if you Format the SD card to Fat32 when in bootloader it doesn't recognize the ROM, so a format to just FAT under windows XP sorted it out, and now I'm back up and running again, though now i cant get my phone unlocked to Vodafone as the XDAunlock returns "error getting code" message. here are my Device info
Rom version 3.17.03
Radio version 4.21.X1
Protcal version 32S54
problem resolved by updating the Radio stack to 6.24 (placing the files onto the device and upgrading from there) once that had done, i had no signal, so downgraded it back to 4.21 and now I'm fully functional
Where did you get the ROM?
I have a similar problem with an XDA which failed whilst being flashed via active sync and now will not start apart from via bootloader. Where did you get the ROM that you mention please?
Thanks
Geezer
use this ROM from http://www.romkitchen.de/ choose one that u will use to cook, PC2002 or WM2003/SE, (WM2003SE cannot use SD Card, only can use activesyn) then downgrade bootloader from v5.22 to v5.15,
using MMC (flash SD) continue to special rom 1.2, Go to the bootloader utilities. Hit Contacts button and you'll get the boot loader option stuff. If the bootloader utilities you get to right away takes you to a menu with things like Boot+CE-->SD then you don't have to worry about hitting the contacts button. You only need Contacts button if when you get to the bootloader screen you see nothing more than some nice colors, the bootloader version and "GSM OK" message.
Take the Boot+CE-->SD option to back everything up. This will take a few minutes.
Once it's done pull the SD out ofthe ppcpe and stick it into your SD card reader. Bring up XDArit and chose your removeable device.
If you have more than one MMC slot select the different ones until you get one that says 'Wallaby' in the hex codes at the bottom of the XDArit screen. You'll be writing out two files, the first is the NB0 file (which is the bootloader) and the second is the NB1 file (which is the OS or ROM). Name these something like original.nb0 and 1.
Wipe the SD card (format FAT). Stick the SD card back into the pda and soft reset, then cradle it.
Go to a DOS prompt and CD to where you put 'pnewbootflash_40116.exe.' Type 'pnewbootflash_40116 nbl515.nb0' to write the Wallaby 5.15 boot loader to the device. If when you downloaded the 5.15 bootloader you called it something else (like 'wallaby_boot_loader_V5.15.nb0' you should of course use that name instead!
The output looks like this:
D:\XDAtools\binaries>pnewbootloader_40116 bl515.nb0
Copying D:\XDAtools\binaries\itsutils.dll to WCE:\windows\itsutils.dll
in FindFlashInfoOffset
protection found at 8c0d60f8
result: 00000000 00000000
for the complete, read this web :
http://www.romkitchen.de/
http://www.romkitchen.de/tools/
http://www.romkitchen.de/tools/manual_unlock.htm
*read careffuly and try it, you can read my post, almost similiar problem but i can solve it by read one by one,hehehhe.. never give-up, ok ^_^V
any help with magician rom?
OK I found this thread and this is what I need to do but I don't follow any of this. what is the ROm image and how do I cook? I'm totally lost and My phone is wrecked or bricked as you say???
Hello, sorry for my english
I ask a very simple question from Barcelona (Spain)
Someone know a program to perform a full backup of the wm5?
I'd like to install wm6, but i'd like to have a backup.
Thanks in advance for you answers
M.A.
Hi,
The backup question will depend on which model is yours G3 or G4 (do a search).
If your model is a G3 in the prophet section of the wiki there is/was a way to dump the rom using teraterm in a SD card.
If your model is G4, I suggest that you read http://forum.xda-developers.com/showthread.php?t=392325 as I wrote there I did the backup but I never restored the rom, but our moderator says it works.
Cross the fingers
Hi Myer, thanks for you answer.
I look you link, and after to jump two more I get http://forum.xda-developers.com/showpost.php?p=2327531&postcount=58, where "imee.h" says this steps to proced:
How did I do the dumping?
1) I put JumpSPL (the three files: exe, lnk and SPL image) to the device root.
2) Unplugged device from PC.
3) Deactivated ActiveSync USB connection.
4) Ran the lnk to JumpSPL on device.
5) Connected device to PC.
6) Ran the mtty on PC.
7) Hit enter -> got Cmd>
8) Entered the command "r2sd all"
After this hollydays I'll try to do, because i'm not very happy to run in my device JumpSPL, without any more info, also i can get conection with mtty via USB, it can not open USB port.
Then after Hollyday i'll try.
Thanks for you help
M.A.
I'll forget,
My device is G4
Un saludo
M.A.
Your best way is to get a software backup program. I use Sprite Backup, it will back up contact, registery, EVERYTHING.
One thing you should know, if you dont already, is that you should not use restore a backup from previous ROMS. If you only backup contacts & Calender then that is fine, but NOT registry or system files, you will end up bricking your fone.
Software backup if much easier download a trial of the lite version and if u like it (i do) purchase full, approx 19$.
Just purchsed the Orange M3100 phone but I cant sync it on my pc. Ive downloaded Windows Mobile Device Center driver for Vista 64bit. It doesnt pick up my phone. Please help, ive googled etc.
Running WM 5.
In settings>connections>usb to pc, uncheck "advanced network functionality". That might work...
Cheers...
also make sure its pluged directly into your pc (one of the ports on the back) not though a usb hub, thats the prob i had syncing my 3100
thanks ultramag69. it seemed to work
now can i use FREE HTC HERMES UNLOCKER v3a by pof using vista?
the instructions talk about active sync and windows xp but no vista
sorry but ive only used this phone for few hours
you can use the sd card method as described in its readme.txt that comes with it
thats the problem I dont have a sdcard yet. Just thought the XP instructions may work using Vista and WMDC.
I believe you need to update to the latest version of WMDC through my reading but you may want to confirm that. If you do a search through the wiki using terms like "vista activesync hermes" you should get a hit as it has been extensively talked about. Also please make sure you check what radio rom you have as unlocking the hermes will downgrade the radio rom to 1.16.00.10. MAKE SURE YOU KNOW WHAT RADIO YOU HAVE SO YOU AN PUT IT BACK...
If you want to use the sd card method (I find it safer than from the pc) then you need an sd card 2 Gb or smaller as though the OS can read a higher card the bootloader (the software in the hermes used to flash) can't. Don't forget to Hard SPL your hermes after you unlock it, I didn't need to do this but you can check by putting a sim from another carrier into your hermes. However, Hard SPL is a MUST. You can get instructions from here - http://forum.xda-developers.com/showthread.php?t=296722
Sd card method on page 116, post 1160. It has all the apps needed to flash both through pc and sd card.
Then you're good to go for flashing a new os.Look into each os on your own, read the post and make up your own mind, DON'T ASK WHICH IS THE BEST..... There is no "best" for everyone, you need to choose on your own. As for the Radio Rom, I would suggest ONLY using the sd card method as if you flash this it the thing that is MOST likely to brick your device if something goes wrong. DON'T INTERRUPT THE FLASH FOR ANYTHING!!!!!
As stated the unlocking will change your radio rom.
Read carefully each step of the guides and don't skip anything and you'll be fine...
Welcome and happy flashing,
Cheers...
hi ultramag69. flashed the phone today and it worked fine. the only problem i have now is when trying to update to wm6 i just get the 4 colours screen and lose sync. same when trying to hard spl 2.1. any ideas?
hi i am trying to upgrade my Typhoon to 6.1 but i haver got to the point in the upgrading process in which i need to restart and press 0 for the IU the only issue is i do not recive this message and i cannot get any further.
Edit: my SPL is 2.05.0130
you must go to the patched SPL 1.09 for Typhoon befor you go any further.
yes it is true said tobbie, with 1.09 SPL you can flash any rom like WM6.1 or WM6.5 on your Typhoon
for SPL 1:09 Can you get HERE
oh well ive tried poatching the spl before but i just recive errorr 260 or 240 and i cannont make no progress i have tried using a different computer but to no avail
oh well... if the device is still original, then you must follow a sequence of actions to allow such upgrade.
These should be mentioned in any custom rom thread. Essentially you must get the SPL 1.09 on the device then you can load any custom ROM.
1. application unlock the old OS
2. CID unlock the device with lokiwiz toolset
3. load SPL 1.09
4. load custom ROM
good luck!
I belive i have already application unlocked and supercided it with lokiwiz toolset but i have peforemd a hard reset due to that connection issue, would that haver affected it in anyway? thanks
If you are back the old WM2k3 and you cannot upgrade the SPL, then lokiwiz probably has not super-CID your device. To check, connect your device in Bootloader mode to mtty (with AS having USB disabled) and enter "info 1" (no quotes) then try "info 2" (no quotes) and report both results.
Not sure about above myself as I have no device at hand today to check right now.
Hard reset does not affect the CID or SIM Unlock - these are stored in the encrpyted area of the ROM (64kb Block) that is not affected by Hard-Rest or OS-flashing.
sorry for my noobiness but it will not show in mtty i have tried the usb drivers? but the phone does not show in mtty
You must make sure that Active Sync (Windows XP) or Mobile Device Center is not using the USB port to connect the device. You can disable the use in Active Sync selecting the "Connections" menu and then disabling there.
Reconnect the device and restart mtty. The USB button will be there only if the USB connection is accessible and the device is connected to the USB port.
sorry for the bump but ive came back to my phone and i am having so my trouble superCIDin the phone i have done everything by the book, ive hard reset the phone and tried everything again and now SDA unclokder says "phone is not unlockable" and the lokiwiz.bat will not super cid it.
Look at mediafire in my kitchen folder here:
http://www.mediafire.com/?3tt15dyp4mbuu
the "...one time per device" ZIP has all tools inside. There is another (on board application unlock) that will do the trick. It installs a tool on the device, execute it there first and then start SDA Unlock. No need to reboot as the changed security policies are active immediately.
i downloaded your kitchen and i ran the htcunlock the the sda unlocker still says the phone is unlockable
So these Orange devices are quite resistant to application unlock. Did you notice that the HTC Unlocker kind of "remote controls" a registry editor? It may be that the changes did not really go through.
It is quite complicated and a lot of trial and error what you will have to do and I cannot advise in detail as I have no such device.
Key is that the application that changes the policy on the device is permitted to do so. Usually as well SDA Unlocker (remotely via the RAPI Policy) or the signed Registry editor controlled via HTC Unlocker can do that. It all goes to the registry keys in HKLM\Security\Policies\Policies where the relevant policy IDs have to assigned the right values (role permissions). You can use the free CE-Command (from ghisler.com) which has a registry tool built in or the same registry editor that HTC Unlcok controls to check if the values that the tools try to write are really written or not. I suspect they are simply NOT written. If you cannot find a tool that can change the policy, then there is another way around this:
The Gold Card method. Get the trial version of "revskills" from www.revskills.com and create a gold card with the device for the "Typhoon". With this card in the device, the SPL will allow ANY (also non Orange) signed ROM to be loaded. Use any non Orange shipped ROM for the Typhoon and load it to the device. This OS should allow to change the application lock and also allow the further steps.
Mind that ROMs for the Feeler or Amadeus have different key-handling (especially for the joystick) - so best you get also a Typhoon ROM for that exercise.
I think in the Tornado Forum was once a description how to unlock a Cingular 2125, possibly similar actions may allow you the first step. Not sure here though.
thanks for your help i beelive that your tool changes the registrey values correctly im nnot sure about this i have tried running it a few times but with the same results
Just to reassure that: Your device is not CID unlocked yet after all the trials you did? What does the SPL tell when you enter "info 2" in mtty connected?
Do you know how to work with a PC registry editor and to connect with the device? There are several that can do that, e.g. "Registry Workshop" or "Smartione" or "CE Regeditor". All these can connect to the device via Active Sync and read out the HKLM\Security\Policies\Policies branch.
Could you just post the export of that branch here?
You can also do that on board the device with CECmd, get into virtual two window mode, on one side go to the branch above (exactly, on top of the second "\Policies"), on the other in any file-directory, can also be root. Then on the registry side press "5" for copy and confirm to copy the "\Policies" branch to the other side. You get a text file called "policies.reg" - attach or post it here.
Finally you could search for the Microsoft tool "security configuration manager". This allows to select the security model "Security off" - once applied to the device the lokiwiz should run with success.