Changing ModelID - 8525, TyTN, MDA Vario II, JasJam General

I need to change the ModelID reported when using ActiveSync. I have an application that I know will work on my 8525, but won't install because it doesn't recognize "HERM100". I'd like to have the ModelID reported as the Wizard (I think it's WIZA100).
Thanks!

Bumping this message...

You can change easy.
In your ppc go to:
Start-settings-info-user ID
Change the name of your device.
But notice:
I realiced that if I sync with 2 PC (with Activsync 4.1) after a hardreset, install back a backup, force AS to use the device name that I want:
my acticsync got messed up. (double contacts, appointments)
So if you sync with 2 pc I recommend to let AS choose the ID name of your device after you make a hardreset.

Related

Device ID / Device Name

Hi All,
I've had to hard-reset my XDAII about 6 or 7 times now in the past 9months, and after everytime, the computer asks me for a Device Name.
Normally this would be "Pocket_PC".
But for some reason, the computer or XDA won't let you use the same device name as you once used previously.
Why is this and how can I use the same device name in the future without having to change to "Pocket_PC1", "Pocket_PC2", "Pocket_PC3", etc...
:?: :?: :?:
it's because the old connection is still located in my doc & settings\application data\activesync or somewhere like that you can
delete it manualy or you can just
use activesync backup and if you hardreset it then you can connect as guest and pick restore from the old connection and you will be using that once more

Rename Device Name?

Hey folks. I am trying to rename my device (I have some software tied to the deivce ID), but everytime I connect to my desktop via activesync, the device is getting renamed.
How can I stop that?
Did you delete the Activesync partnership on your PC before connecting the re-named device? I find that usually works.
Yes, i did.
I loaded AS on the desktop, "File" -> "Delete Mobile Device".
Then, I goto the tytn (unplugged from the pc) and rename it using Start -> settings -> system -> about ->device ID and clicked "ok".
then, I re-connect the tytn (via cable).
ActiveSync then connects, but uses the OLD device name (It does go thru the setup portion - what to sync, etc.) but still on the old name.
Did you soft reset after changing the device name?
christopherwoods said:
Did you soft reset after changing the device name?
Click to expand...
Click to collapse
yes, I did.
If you remove active sync (program) from both your PC & also delete all sync settings on your PPC, then you wil be able to reset your "name" to whatever you desire.
Look in Local_Machine/ident

Need help with activesync on Win XP SP3!

Hi.
Some days ago i had a problem synchronize my HTC with PC in activesync (pc could not detect HTC), so i decided to reinstall it, but that doesnt solve my problem, instead of i now getting this message "To synchronize this device, you must install 4.5 or newer on your desktop computer." but i already have activesync version build (5096). Then i tried this: Soft reset, Hard reset, tried unistall activesync again - but that doest worked ! Maybe somene know how i can solve this, I'll be very grateful.
if you want to take the small risk, try removing all traces of Activesync connection from your PC and from HTC:
On PC:
1. search for this folder (or similar):
\\Documents and Settings\...your user name...\Application Data\Microsoft\ActiveSync\Profiles\
inside it should be folder with your device name - remove it,
or just remove everything there
2. in registry remove all entries under the key (not the key):
HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services\Partners
On HD2:
3. It would be good to make full system backup first, or at least PIM data (contacts, appointments etc.) backup
4. DON'T remove connections in ActiveSync application or you'll lose all your PIM data
5. in registry remove all entries under the keys (not the key):
HKEY_CURRENT_USER\Software\Microsoft\ActiveSync\Partners
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\Partners
6. you could aslo delete all contents inside Windows\ActiveSync folder - not sure if this is necessary but will not harm you
now restart both your PC and HD2, connect the cable and it should be just like the first time those two have met,
hope it'll work
p107r0 said:
if you want to take the small risk, try removing all traces of Activesync connection from your PC and from HTC:
On PC:
1. search for this folder (or similar):
\\Documents and Settings\...your user name...\Application Data\Microsoft\ActiveSync\Profiles\
inside it should be folder with your device name - remove it,
or just remove everything there
2. in registry remove all entries under the key (not the key):
HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services\Partners
On HD2:
3. It would be good to make full system backup first, or at least PIM data (contacts, appointments etc.) backup
4. DON'T remove connections in ActiveSync application or you'll lose all your PIM data
5. in registry remove all entries under the keys (not the key):
HKEY_CURRENT_USER\Software\Microsoft\ActiveSync\Partners
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\Partners
6. you could aslo delete all contents inside Windows\ActiveSync folder - not sure if this is necessary but will not harm you
now restart both your PC and HD2, connect the cable and it should be just like the first time those two have met,
hope it'll work
Click to expand...
Click to collapse
Well i decided to reinstal my operation system, cause bug right in her.
I checked my htc on a 2 diffrent PCs ( with the same operational system ) and it worked perfectly.
So thanks for help, i really appreciate that

[SOLVED] HTC Touch - retrieve contacts with broken touch screen

Hi,
I have googled for several hours and found a lot of solutions, but there's always one step, which I can't pass through!
The situation is: HTC touch, everything is working, display is working, but the touch control doesn't.
The problem is that phone connects to pc as hard drive. So I don't have access to ActiveSync - when usb is connected it shows internet sharing tab. Because I cannot control anything via touchscreen, I can't get in any settings ... so options like sync with outlook, mymobiler ... are not able to be used.
I created .cab which should change registry entry to show connection type selection when usb plugged, but I can't confirm installation (is there a way to create cab which is installed without confirmation)- I can control the phone with cursor button and red/green buttons - so I can use some programs like tot. commander ... but I can't input any values, i can't access any options on soft keys ...
Does anybody have some idea ... I'm running out options ...
Thanks
Hard reset seems to be the obvious step.
Edit: sorry, I overlooked your post title, did you consider repairing your lcd or digitizer?
Try to find the program that actually toggles the USB. Some CPL only start a program that does the job finally. In the windows directory search for *usb* with TotalCommander.
Probably also BT connection to ActiveSync could be activated for RemoteAccess?
What happens if you do not have an SD card in the device? Will it fall back from Mass storage to AS?
Total Commander can also copy a reg-file to the registry, but for that you have to be able to select the options in TC - not an option either I think.
You could also use MortScript to write to the registry - must be installed first, however.
Probably there is a program that can map the softkeys to hardkeys?
What about AEButtons+
Thanx for all advices, but:
1. I wasn't thinking the screen, because that's my sister's old phone, and I need to get her PIM into new one (and throw this one against the wall) ... in the end she can manualy rewrite contacts, because listing in people is possible with cursor - but sms, call logs etc. will be lost and I'd like to save her from hours of manual writing hundret of contacts.
2. When connect without SD, no active sync connection or other selection appears - only internet sharing.
3. Copiing file in Total Commander is impossible to finish - by holding down the cursor I get menu (open, copy, send), but to comlete process I'd have to press softkey with 'ok'
4. I cannot establish any bluetooth connction, because it always require the code, which I'm not able to write withou touchscren
5. Mort script is unfortunately not installed
6. AEButtons could be good - but as it comes 'from an unknown publisher' - I have to confirm installation - what I'm not able to ...
... I'm slowly givin' up ... disabled digitizer always brings me into dead end.
I also thought about dump ROM and run it in emulator - but I've never done this and it would probably take more time to learn it then manual rewrite of contacts ...
What about executing PPCPimbackup on the device? This will save/restore the stuff you need on the device
...unknown publisher, is it?
tobbbie said:
What about executing PPCPimbackup on the device? This will save/restore the stuff you need on the device
...unknown publisher, is it?
Click to expand...
Click to collapse
Right - yes/no ...
When you connect the phone to the pc, do you have access to it´s storage? If yes, just grab the file PIM.VOL. Now, install microsoft emulator and replace this file. Now you can backup (and even sync if you install activesync) with the emulator.
You will need :
device emulator 3 (http://www.microsoft.com/downloads/...af-12e3-4b2f-a394-356e2c2fb114&displaylang=en)
emulator images : http://www.microsoft.com/downloads/...a8-1dd7-426f-a913-4f370a65a582&displaylang=en
bsinclair said:
When you connect the phone to the pc, do you have access to it´s storage? If yes, just grab the file PIM.VOL. Now, install microsoft emulator and replace this file. Now you can backup (and even sync if you install activesync) with the emulator.
You will need :
device emulator 3 (http://www.microsoft.com/downloads/...af-12e3-4b2f-a394-356e2c2fb114&displaylang=en)
emulator images : http://www.microsoft.com/downloads/...a8-1dd7-426f-a913-4f370a65a582&displaylang=en
Click to expand...
Click to collapse
Man! You're my (resp. my sister's) savior! I don't have access to storage, but I've used total commander - copy to clipboard / paste from clipboard on sdcard and that allowed me to download it. Now I tried to replace pim.vol in new device - Topaz with lates Energy ROM - sms are not restored, but contacts and calendar are ... thats 90% what I needed!
Anyway I'm going to try emulator to get those sms ... but I'm sutisfied for now!!!
Changing to [Solved]
THANX!
The sms should be in cemail.vol, but I can't reach it ... the clipboard unfortunately doesn't work for this file, but sms weren't the main goal ...
You're welcome buddy. I always use the emulator for this kind of thing as it is safer, will not hurt my phone.
dajbyco said:
Man! You're my (resp. my sister's) savior! I don't have access to storage, but I've used total commander - copy to clipboard / paste from clipboard on sdcard and that allowed me to download it. Now I tried to replace pim.vol in new device - Topaz with lates Energy ROM - sms are not restored, but contacts and calendar are ... thats 90% what I needed!
Anyway I'm going to try emulator to get those sms ... but I'm sutisfied for now!!!
Changing to [Solved]
THANX!
Click to expand...
Click to collapse
Dajbyco, could you please explain what you did cause I have exactly the same problem with my brother's phone. The screen is dead on his HTC Touch pro 2 and we need to retreive his contacts and calendar. I've downloaded Total Commander, but I don't know how to access the pim.vol file.
Thank you!
If the Active Sync Connection still works you can do everything remote via PC.
tobbbie said:
If the Active Sync Connection still works you can do everything remote via PC.
Click to expand...
Click to collapse
I can't do anything since I don't see what I do. The screen is black. So I can't reach the Active Sync Connection settings.
You don't need to access the AS settings on the device if it is not in "Mass Media mode". There is a remote management software that allows to see what is on the screen of your device. The only one I know that installs without any device-side confirmations is Everywan: http://www.sparus-software.com/en/download/software/everywan-remote-support,232.html
For accessing the options for Active Sync on the PC you do that directly in AS on the PC. To get best advice, could you tell what your problem is in detail?
So most important question:
Does the device connect to the PC in "Active Sync Mode"?
Same problem - how can I copy to clipboard
dajbyco said:
Man! You're my (resp. my sister's) savior! I don't have access to storage, but I've used total commander - copy to clipboard / paste from clipboard on sdcard and that allowed me to download it. Now I tried to replace pim.vol in new device - Topaz with lates Energy ROM - sms are not restored, but contacts and calendar are ... thats 90% what I needed!
Anyway I'm going to try emulator to get those sms ... but I'm sutisfied for now!!!
Changing to [Solved]
THANX!
Click to expand...
Click to collapse
Hi, I have the same problem. What do you mean you used total commander and copy to clipboard? I have total commander open but when I connect my phone with the computer it does recognise the connection but it doesn't show any storage (shows drive but no access to it). So what can I then copy and how?
Many thanks!!
Petr

[Q] Stuck Upgrading

hi i am trying to upgrade my Typhoon to 6.1 but i haver got to the point in the upgrading process in which i need to restart and press 0 for the IU the only issue is i do not recive this message and i cannot get any further.
Edit: my SPL is 2.05.0130
you must go to the patched SPL 1.09 for Typhoon befor you go any further.
yes it is true said tobbie, with 1.09 SPL you can flash any rom like WM6.1 or WM6.5 on your Typhoon
for SPL 1:09 Can you get HERE
oh well ive tried poatching the spl before but i just recive errorr 260 or 240 and i cannont make no progress i have tried using a different computer but to no avail
oh well... if the device is still original, then you must follow a sequence of actions to allow such upgrade.
These should be mentioned in any custom rom thread. Essentially you must get the SPL 1.09 on the device then you can load any custom ROM.
1. application unlock the old OS
2. CID unlock the device with lokiwiz toolset
3. load SPL 1.09
4. load custom ROM
good luck!
I belive i have already application unlocked and supercided it with lokiwiz toolset but i have peforemd a hard reset due to that connection issue, would that haver affected it in anyway? thanks
If you are back the old WM2k3 and you cannot upgrade the SPL, then lokiwiz probably has not super-CID your device. To check, connect your device in Bootloader mode to mtty (with AS having USB disabled) and enter "info 1" (no quotes) then try "info 2" (no quotes) and report both results.
Not sure about above myself as I have no device at hand today to check right now.
Hard reset does not affect the CID or SIM Unlock - these are stored in the encrpyted area of the ROM (64kb Block) that is not affected by Hard-Rest or OS-flashing.
sorry for my noobiness but it will not show in mtty i have tried the usb drivers? but the phone does not show in mtty
You must make sure that Active Sync (Windows XP) or Mobile Device Center is not using the USB port to connect the device. You can disable the use in Active Sync selecting the "Connections" menu and then disabling there.
Reconnect the device and restart mtty. The USB button will be there only if the USB connection is accessible and the device is connected to the USB port.
sorry for the bump but ive came back to my phone and i am having so my trouble superCIDin the phone i have done everything by the book, ive hard reset the phone and tried everything again and now SDA unclokder says "phone is not unlockable" and the lokiwiz.bat will not super cid it.
Look at mediafire in my kitchen folder here:
http://www.mediafire.com/?3tt15dyp4mbuu
the "...one time per device" ZIP has all tools inside. There is another (on board application unlock) that will do the trick. It installs a tool on the device, execute it there first and then start SDA Unlock. No need to reboot as the changed security policies are active immediately.
i downloaded your kitchen and i ran the htcunlock the the sda unlocker still says the phone is unlockable
So these Orange devices are quite resistant to application unlock. Did you notice that the HTC Unlocker kind of "remote controls" a registry editor? It may be that the changes did not really go through.
It is quite complicated and a lot of trial and error what you will have to do and I cannot advise in detail as I have no such device.
Key is that the application that changes the policy on the device is permitted to do so. Usually as well SDA Unlocker (remotely via the RAPI Policy) or the signed Registry editor controlled via HTC Unlocker can do that. It all goes to the registry keys in HKLM\Security\Policies\Policies where the relevant policy IDs have to assigned the right values (role permissions). You can use the free CE-Command (from ghisler.com) which has a registry tool built in or the same registry editor that HTC Unlcok controls to check if the values that the tools try to write are really written or not. I suspect they are simply NOT written. If you cannot find a tool that can change the policy, then there is another way around this:
The Gold Card method. Get the trial version of "revskills" from www.revskills.com and create a gold card with the device for the "Typhoon". With this card in the device, the SPL will allow ANY (also non Orange) signed ROM to be loaded. Use any non Orange shipped ROM for the Typhoon and load it to the device. This OS should allow to change the application lock and also allow the further steps.
Mind that ROMs for the Feeler or Amadeus have different key-handling (especially for the joystick) - so best you get also a Typhoon ROM for that exercise.
I think in the Tornado Forum was once a description how to unlock a Cingular 2125, possibly similar actions may allow you the first step. Not sure here though.
thanks for your help i beelive that your tool changes the registrey values correctly im nnot sure about this i have tried running it a few times but with the same results
Just to reassure that: Your device is not CID unlocked yet after all the trials you did? What does the SPL tell when you enter "info 2" in mtty connected?
Do you know how to work with a PC registry editor and to connect with the device? There are several that can do that, e.g. "Registry Workshop" or "Smartione" or "CE Regeditor". All these can connect to the device via Active Sync and read out the HKLM\Security\Policies\Policies branch.
Could you just post the export of that branch here?
You can also do that on board the device with CECmd, get into virtual two window mode, on one side go to the branch above (exactly, on top of the second "\Policies"), on the other in any file-directory, can also be root. Then on the registry side press "5" for copy and confirm to copy the "\Policies" branch to the other side. You get a text file called "policies.reg" - attach or post it here.
Finally you could search for the Microsoft tool "security configuration manager". This allows to select the security model "Security off" - once applied to the device the lokiwiz should run with success.

Categories

Resources