Device ID / Device Name - MDA II, XDA II, 2060 General

Hi All,
I've had to hard-reset my XDAII about 6 or 7 times now in the past 9months, and after everytime, the computer asks me for a Device Name.
Normally this would be "Pocket_PC".
But for some reason, the computer or XDA won't let you use the same device name as you once used previously.
Why is this and how can I use the same device name in the future without having to change to "Pocket_PC1", "Pocket_PC2", "Pocket_PC3", etc...
:?: :?: :?:

it's because the old connection is still located in my doc & settings\application data\activesync or somewhere like that you can
delete it manualy or you can just
use activesync backup and if you hardreset it then you can connect as guest and pick restore from the old connection and you will be using that once more

Related

Active Sync Problem

I had a crash on my MDA II so I had to make a reset. After the boot process and installing all the standard programs I connected it with my PC. But I was not able to use an old partnership.
So I have to configure it all again
How can I use the old partnership that I must not reconfigure my MDA II?
PS: Yeah I forgot to make a backup
why do you need to use the old patnership?
Sorry I totally forgot my post here. Very stressful last week.
I thought with the old partnership all programms will be installed automatically.
And is it possibly to make kind of a backup with active sync to restore everything with syncing after a crash?
if you have set activesync to backup
and you hardreset
and connect the device to the pc
and pick guest
and pick restore from <insert old patnership name here>
your device will get restore it settings and programs
thx i will try that

GPRS connecting once, then needs reset

Hi,
I've got an Orange M500, upgraded with the Imate ROM 1.12.00WWE - ever since I upgraded the ROM, I can connect to my Orange GPRS service fine, however, if I disconnect then try to reconnect again, the connection fails. I have to turn on flight mode, then turn on the radio again in order to get GPRS access.
I've tried upgrading to Radio 1.13.00, but still no joy.
Any ideas?
Mine does that and I have the original ROM. A bit of a pain isn't it.
Here's the fix
This was originally posted by Peter for the imate JAM.
I just installed it and it's working like a charm.
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is Ok. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.
I have the same GPRS problem too. However, the link you provided just asked for the password to access that ftp. Hey, acs540, do you know the password or do you have that CAB file? Thanks in advance.
usernameassword is xda:xda
The fix in this post seems to refer to caller id!?! I too get the gprs connection problem and have made it better with different roms but not found a sure-fire fix.
If anyone has a patch that fixes this, please post it!
GPRS now working
Hi,
Finally I tried, or at least halfway, After I removed the CallerID everyone is talking about my Qtek9090 now works flawless regarding GPRS.
This is very interesting that Caller ID software makes GPRS not working
Anyway, now I can start and stop GPRS several times, I have now toggled it 10 times without any problem.
Before I had to reset/toggle radio to make it reconnect after a disconnect.
Thank you all that has investigated this problem!
One last thing, Do you really need CallerID? :roll:
Br
Lars
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
XShell said:
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
Click to expand...
Click to collapse
Well, yes, I have changed to Class8 (4R1T), default was (I belive) Class10
Br
Lars

Changing ModelID

I need to change the ModelID reported when using ActiveSync. I have an application that I know will work on my 8525, but won't install because it doesn't recognize "HERM100". I'd like to have the ModelID reported as the Wizard (I think it's WIZA100).
Thanks!
Bumping this message...
You can change easy.
In your ppc go to:
Start-settings-info-user ID
Change the name of your device.
But notice:
I realiced that if I sync with 2 PC (with Activsync 4.1) after a hardreset, install back a backup, force AS to use the device name that I want:
my acticsync got messed up. (double contacts, appointments)
So if you sync with 2 pc I recommend to let AS choose the ID name of your device after you make a hardreset.

unable to change device name on my 8125

As the topic says, I can't change it. Actually I can, but as soon as I sync, it changes back.
I goto settings/about/device id/ and change the name. At the same time I delete the device from activesync (via file/delete mobile device). As soon as I connect it, It says it has found a new device, then changes the device name to WM_my_name1. I don't want it have that name.
I have tried uninstalling activesync, hard-reseting my phone and still no luck. Any ideas?

Broken Touchscreen/LCD Backup possible?

Hi,
the Display of my HD is broken and I but can start the device, but can not handle it.
So I Can Not backup my Contacts from the Device to my Computer, because of the system password which is necessary to start Windows Mobile 6.1
It is possible to start the HD in a 'Safe Mode' like Windows to backup all Files from the HDD of my device to my computer (without 'active sync')?
At the moment when I connect the HD to my computer via USB the device is identified as an extern HDD.
Thanks for your help!
greets
deo
deo2k said:
Hi,
the Display of my HD is broken and I but can start the device, but can not handle it.
So I Can Not backup my Contacts from the Device to my Computer, because of the system password which is necessary to start Windows Mobile 6.1
It is possible to start the HD in a 'Safe Mode' like Windows to backup all Files from the HDD of my device to my computer (without 'active sync')?
At the moment when I connect the HD to my computer via USB the device is identified as an extern HDD.
Thanks for your help!
greets
deo
Click to expand...
Click to collapse
Erm i think you'd need to have active-sync connection to be able to do anything like that. Otherwise you'll just have to wait for new lcd and repair it.
EDIT: Have you not got them stored on SIM card to use in other phone?
vistar said:
Erm i think you'd need to have active-sync connection to be able to do anything like that. Otherwise you'll just have to wait for new lcd and repair it.
EDIT: Have you not got them stored on SIM card to use in other phone?
Click to expand...
Click to collapse
Unfortunately not.
All contacts are in the device memory.
How do the professionals in the repaircenter backup my data before they repair/open the device?
They don't.
Download http://www.mymobiler.com/ and see if you can control your device from your pc.
r
Andrew
bigdish said:
Download http://www.mymobiler.com/ and see if you can control your device from your pc.
r
Andrew
Click to expand...
Click to collapse
Yeah i was thinkin along them lines, but then you'd need bluetooth to be on and visible, maybe he hasn't as its a battery waste to leave it on.
Mmm you don't need to put in your startup password for Activesync to work.
So maybe the problem is with his usb connection if all he can see is the phone as a hdd.
r
Andrew
Problem is that i selected to use the device as hdd last time i connected with usb.
When i start the handy i hear the boot-sound, but i cant see anything.
So i need a option to skip the system password or start the handy via USB like a Bootloader or something else and copy all files from device to my pc.
Did you try http://www.mymobiler.com/ anyway ?
r
Andrew
I installed My Mobiler on my Computer and startet it.
Connected my HD to my Computer and the Computer detected the HD as extern HDD.
My Mobile on my Computer didnt recognize my HD.
MyMobile>Connect: Your Mobile may not be connected or ActiveSync connection is busy now. If the problem persists, please restart 'MyMobiler'
MyMobile>Configure Mobile>Install: PLease wait...Reinstalling MyMobiler on your mobile...... Unable to install....
Seems i can not skip my password.
I would delete and reinstall activesync and try again.
r
Andrew
(don't give up)
i have windows 7 and no active sync running.
same problem unter windows vista.
So you are using Mobile device centre ?
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx
Problem is i selected "use hd as extern hdd" and not activesync last time i connected via USB.
So on the one hand when i connect hd to computer its everytime detected as hdd because i cant use the touchscreen to selected the other option('activesync')
one the other hand i have to unlock via password the activesync connection if i could build up it.
bigdish said:
So you are using Mobile device centre ?
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx
Click to expand...
Click to collapse
yes indeed
Well I use XP and activesync.
Question - Has your phone worked previously syncing with Windows Mobile Device Centre ok ?
yes latest sync is from june 2009
Well I hope someone with your operating system reads this and can help more.
All I know is with Windows 7 and Vista you have to ensure your firewall settings allow the connection and some AV programmes can interfere - hope this helps.
r
Andrew
just an advice for everybody.
make a backup every once in a while.
i for example i use Microsoft MyPhone and even if my HD or my sim card gets torched or kidnapped i will still be able to acces my contacts,photos,documents,sms etc. on the myphone webpage.
realy cool right?
so if you did use MyPhone then you can see your contacts.
good luck.
I think I've just thought of a solution for you...
Windows Mobile uses the "2577" directory, if it exists, in the root of your SD card to autorun installation scripts from. When I disconnect my HD from my PC in USB storage mode, the 2577 directory is read and installation files are executed.
It may be possible to run a mortscript or a cab file from there that will either back up your PIM data, or change the USB function back to Activesync - probably the latter is easier as I'm guessing it would just be a reg key that needs changing.

Categories

Resources