hi guys
well i have a quite serious problem with my 8125
cpl of days ago my 8125 screen started disaligning and I couldnt stand it anymore... it would disaling after 10sec and I was mad about it
so i made a backup of main memory and decided to to a hard reset..
after hard reset, I got the WM screen and needed to tap the screen, I did the first two corners but after those i couldnt tap anymore, the touchscreen wouldnt feel anything.. so i softreseted it and got back to the WM screen and that alignement but this time it wouldnt feel anything- i stuck on the first screen..
okay, I thought maybe its a ROM fault (I use molski rom 2.26.10.2 with aku 2.3) and I tried to load it in bootload.. believe what, I found out that fuxing M$ made xda ROM archive down.. i went mad...
so i couldnt update my rom
than yesterday after reading sites and sites over net, I decided to open my wizard and try cleaning it, I did that, put cover back and all that stuff... and now my pc doesnt recognize the wiz when I connect it in bootload mode on AS
okay, so I don't know what to do, im out of ideas and I beg sum1 for help...
I got my 8125 from eBay last August and till cpl of days ago it was working perfectly.. Im not from USA btw.. ill try to send it to a diagnostic service in HTC in my country... but is there any other possibility?? would changing the touchscreen solve my problem?
plz help me...
The bootloader does not work with active sync, i think.
Active Sync requires to dialog with Windows Mobile, and the bootloader just has the basic code to make a simple USB conection.
You can probably use the Wizard Love ROM, which works great with any Wizard (even G4), and upgrade from there to any other version.
Notice that Wizard Love does not use ActiveSync at all, it downloads the rom through USB without active sync.
Please excuse my english, im spanish
can u plz PM with the link for the Love ROM download? thx
Related
Hi all,
first off all i'd like to say Hi to everyone as im new here.
Also id like to thank everyone for readingmy problems
Any way i purchased an XDA II about a Week ago from Ebay its really my fault as in the item description it said there was a problem with the phone it wont start as its locked.
The phone goes to a Blue screen after you ON it and do the screen configiration etc
The blue screen has Cognito on it saying 'Warning this Devcie is Locked'
then under it:
'If you are installing from the MMC card please wait.
Otherwise, either insert the MMC card and do a cold boot, or contact Cognito to unlock the device.
Im not sure what this means and if i leave the phone for a while or type it from it takes me to a password screen in white with the keyboard on it.
----
Im not sure what to do if you can help me you will save me alot of money otherwise do i just chuck the phone away also
ive tried a Hard Reset by clicking the POWER BUTTON, RESET KET.
nothing happens just the phone loads up and makes me Calibrate the screen.
Ive tried this process while also pressing the D-PAD i get a screen with Serial with V1.06 i think at the bottom
i dont really know how i can know if its Hard resetted.
So please peolple take a Minute to help me thanks alot.
may work not too sure though
hey man i feel sorry for you
okay wot u do is download the o2 rom for the device because u sed it is a xda2 so download and install that. this will do a comlpete rest not like hard reset it will deleted absolutly everything on the xda2 and then install indows 2003 back onto it it will be like getting a new fone. try it i hope it works for u
HI
Thank you so much.
For your Advice and Time.
can you confirm this will remove that Lock thing ?
Also do you know where i can download Win2003 for XDA II o2 UK
Thank again
Hi,
I flashed the himalaya M1000 with WM2003se upgrade. but still could not remove the Cognito (shame).
please if somebody can help that would b nice
Should do. I've done the 1.72 update on it based on the ROM from this site and all is good.
i got my mda compact last week and updated the rom to an imate jam rom the first day i got it.
now since then i have had to do several hard resets because after so long whenever i press the power button to turn the screen on, the screen is completely white and i cant see anything else except this.
Is this a known problem or does anyone know what to do to sort this problem as its getting a tad annoying having to hard reset almost every day!
Any help will be greatly appreciated
jamzi said:
i got my mda compact last week and updated the rom to an imate jam rom the first day i got it.
now since then i have had to do several hard resets because after so long whenever i press the power button to turn the screen on, the screen is completely white and i cant see anything else except this.
Is this a known problem or does anyone know what to do to sort this problem as its getting a tad annoying having to hard reset almost every day!
Any help will be greatly appreciated
Click to expand...
Click to collapse
May i ask why you upgraded it the day you got it? I also have the MDA Compact and i still run version 1.01 P) because i don't have any problems with it.
Did you just blindly update or did you have problems before updating?
the reason i upgraded the rom was that i wanted rid of all the t mobile stuff as i use o2 mate.
the only other stuff i installed on it a game called s tris, pocket painter and tcpmp player, not sure if either of those could have anything to do with this.
Any ideas mate?
jamzi said:
the reason i upgraded the rom was that i wanted rid of all the t mobile stuff as i use o2 mate
Click to expand...
Click to collapse
Did you unlock the sim?
And are you aware that you can actually remove all Tmobile junk pretty easily without having to upgrade?
it was already unlocked by the person i got it from.
yeah i was but i just thought it would be quicker and better if i just changed the rom.
i just downloaded the newest mda compact rom. do you recommend i go back to that one and get rid of the t mobile stuff manually?
oh and have you ever heard of this white screen problem that im having?
jamzi said:
it was already unlocked by the person i got it from.
yeah i was but i just thought it would be quicker and better if i just changed the rom.
i just downloaded the newest mda compact rom. do you recommend i go back to that one and get rid of the t mobile stuff manually?
oh and have you ever heard of this white screen problem that im having?
Click to expand...
Click to collapse
I think it is a better idea to go back to the original 1.1 ROM. I removed all T-mobile crap with the push of a button.
You have to hardreset the device, when you get to the today screen immediatly softreset the device and voila. No more T-Mobile crap.
When you get to the today screen for the first time after a hardreset the device is programmed to install all Extended ROM files (which include the TMobile crap).
Simple as that .
cheers mate.
what should i install from the extended rom folder without the risk of installing any t mobile nonsense?!
i thinkive just about figured out what to install but i cant seem to get the smart dialler function without installing the t mobile skin over the phone function :?
If you go to the XDA devs ftp in the magician extended rom folder, grab the smart dialler from the Jam extended rom. I don't necessarily agree with reverting back the rom but if it fixes it, great.
If you want a completely unbranded rom, go for the I-mate WWE versions of the rom. I haven't had a single problem with any up til 1.11 (I haven't tried 1.12 as I have no need to go any higher)
im looking in the shipped roms folder now, is there any WWE 1.11 one that you would recommend? its just there is so many and ive had this white screen problem with every rom ive tried i want to make sure i choose the correct one!
Well if it happens with every rom you've tried then I'd say the problem must be hardware related. If a rom upgrade, downgrade, or anything doesn't fix the issue then it has to be the one thing that hasn't changed, your hardware. My recommendation is put the original rom back on and get it looked at under warranty, unless someone else can offer another explanation.
The latest rom I've installed and still on my phone is the Anansky BigStorage rom. I haven't needed to change that for months, although I've played with all the I-mate roms up to 1.11. The only change I've made since then is the 1.13 radio upgrade.
ok ive went back to the mda compact rom (one i downloaded from a link on this site, not the ftp)
got rid of the t mobile stuff as explained earlier and changed the splash screens too with a cab file.
fingers crossed so far so good!
im terrified to turn the display back on after it goes off now though! and a bit apprehensive of installing anything after the last few days ive had!
Right i need some help, big style.
Had me phone now for nearly a couple of months and it's been fine. Then today it all went wrong. Firstly the phone just did'nt work no signal or anything. Tried everything to fix but nothing seemed to work. So hard reset. Now the phone boots up and goes thru setup etc.. (but no 02 option??) gets to my today screen but when I choose anything i get a msg saying did i want to run unknown program etc.. choose yes/no. I have chosen all the combinations to get it to work but the phone sometimes freezes so i have to soft reset to get going but then I'm back to square one. I've downloaded the backup o2 rom but when i run it i get an error saying it cannot create a folder??? So at the moment i can use the phone sometimes but sometimes it freezes up 9/10 i cant sync with comp.
Before you ask I only have tomtom installed and afew themes, and the xda worked fine before hand.
Any ideas please would be a great help. If not I'll be straight on the phone to o2 to get a replacement.
cheers
screen shot of the error msg i get
screen shot of the error msg i get
Right getting really annoyed now with my phone :evil:
managed to get it working again after downloading the o2 rom and re-flashing. Since i started this thread i have re-flashed rom about 3 times!!!! My phone just stops working. No network signal or anything!!! All the problems started after i install wisbar, phones never been the same since. stoped using wisbar and started pocket plus. phone worked fine until i soft reset cus it frooze. when it restarted nothingworked. I'm just about to flash again for the 4th time. Only gonna install tomtom and eten dialer and afew games thats it. I'll install in basic mode but wont delete any o2 files as normally do. If it goes again after this it's going back to o2.
cheers
Well, simply send it back for warranty repair, what's the problem? These things happen, I'm used to that... had to bring my Nokia 6600 back 2 times during warranty year... :?
does it damaged the phone if your constantly re-flashing the rom?
Sorry to keep posting but is there an anti-virus software or something cus i think there must be something on my xda cus even after flashing the phones still not 100%
cheers
Keep in mind, by the way, that flashing your rom with any ROM other than one provided to you by your provider is grounds for voiding your warranty
yeah I know i just thought that may fix whatever problem there is. I think i've just got a dud mini s. Worked fine for a month but now it's gone crazy. I think re-flashing with the o2 rom 5 times and still no joy means the phone will go back.
I'll ring o2 first thing in the morning.
cheers
Guys I recently purchased a brand new SPV M600 from ebay and when I say its new, trust me because it was completely sealed and no marks/scratches on the M600 plus all the wires/leads were sealed etc, and he even sent me the invoice from Orange stating the date of purchase, accidentally I think as it contained his home address and telephone number!
Now when I first turned it on and charged the battery etc, I had a little play with it and it all seemed fine. I took it to work with me that day and at work it started to act strange.
First it started by soft resetting itself while I was in the SETTINGS window just tweaking all the bits and bobs to my liking. Anyway it started up again and this time it seemed ok. I tried opening all the menus etc as I had done before but it didnt soft reset again which was a little relief!
It worked fine for the next 10-15 mins after which I put it away and started doing some work which is what I should've been doing in the first place!
I got home in the evening and sat in from of my PC and turned on the PPC and this time it started at the Splash Screen instead of coming out of stand by! Weird as I didnt reset the device and its on Button Lock so it couldn't have happened by accident whilst being in my pocket!
The only problem was though, this time it stayed in the splash screen and wouldnt go past that! I soft reset it again but still no luck!
So I then went for the kill and did a hard reset, not that I lost anything as I didnt have any information on there. After the hard reset, it goes past the splash screen on to the blue nice looking Windows 2005 screen but it stays stuck there!
Did a hard reset again and this time it worked but it crashed when it was installing the customisation tools! It needed a soft reset again! After that it seemed to work ok... only for a little while before it started all over again!
Now this was the original Orange Rom and I have no idea which one it was and I didnt care because it had to go!
I came here and found that our friend Jester was upto his old tricks again and had released a modified version of the Qtek Rom, so I went for it and installed it without any problems (except for his very original spash screen which scared the hell out of my little sister and I didnt find it very comforting either but soon had it changed with Jester's HTC Splash screen).
But unfortunately the problem still remains and the same thing keeps happening. It soft resets itself once in a while and when I do a hard reset it gets stuck in either the Splash Screen or at the next screen which is the Windows 2005 blue screen.
Its like trial and error really, when you guys want to hard reset your prophet all you have to do is do it once, but I have to keep trying at least 2-3 times.
In some cases I need to do a hard reset and then a soft reset soon after when it gets stuck in the Windows 2005 blue screen! And even then its not over because when it gets to the installation of the customisation software, theres a good chance it'll crash there and will need a soft reset!
I tried to install the original Qtek Rom, the one which Jester modified a little but it wouldnt work and I'm guessing I only have the CID lock to thank for that! Mines a G4
Any idea guys? I'm totally screwed here as I cant send it back to the guy I bought it from because I have changed the Rom and thats not good because he cant send it back to Orange to get a replacement! I wish I hadnt changed the Rom and just sent it back to him but I thought it was a software issue.
I'm not convinced its a software issue anymore though!
If you made it this far then I apologise for making this post too long (was longer but I had to to edit out like 1/4), and bloody hell is that the time!
Anything from anyone would be much appreciated.
All the best.
My friend you should try to format your phone and install new operating System...Similar problem happened to me (mine just freezed and I had to reset it) so the new OS is the solution of your problem...So when you do that,tell us if everything is ok..And one more thing---This little mobile device is THE BEST you'll ever get for that amount of money-so keep it and take care my friend...
Greetings!
Alix, thanks for your post. I'm not too sure about that because like I said, it came with the original Orange Rom and even then it was like this, and after upgrading to the latest Qtek Rom, the problem still continues. So somehow I dont think its the software. I mean I hope it is the software as thats an easy fix if I can somehow get my CID unlocked and right now thats not possible on G4 Roms, unless I'm wrong and falling behind?
I have a feeling its the hardware and if it is then I'm screwed!
Thanks for your reply and hope to hear from others soon.
Have you tried to replace the battery? some times the battery causes this kind of behavior when its not supplying enough power to the phone.
try to HR with the phone connected to a wall charger (not to pc) and see how it goes.
if it reboots OK, so probably its a battery issue.
Shayd that was good thinking and I tried it right away but unfortunately it wasnt the case. It still needed 3 tries... one hard reset followed by two soft resets before it went past the Splash Screen.
I've just about had enough with this thing!
Thanks nonetheless.
How To Reset SPV M600
hi every one,
can some body tell me how to hard reset SPV M600
It's On ORANGE
IPL 2.10
SPL 2.10
infozohaib said:
hi every one,
can some body tell me how to hard reset SPV M600
It's On ORANGE
IPL 2.10
SPL 2.10
Click to expand...
Click to collapse
RTFWiki!! It's there!
hi , I have spv m600 from orange and I did something to change the original room , and now it work perfect here do that way
first thing unlock sim using this link to download unlock tool.
http://forum.xda-developers.com/showthread.php?t=300062
After that you can download room from this page to updagate your phone
http://forum.xda-developers.com/showthread.php?t=297489&page=3
Download: LvsW WM5 NVID(no vendor) [RUU-Prophet-220734-2207114-024721-NVID]
That room work for mime . you should try it
I hope .It ll help you
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
Hard reset SPV M600.
How reset SPV M600?push buttom cam and buttom comm manager(both two buttoms left ) and the reset with the stylus.keep the two buttoms pushed till you get a message then strike any key to quit.
Caution:
you turn off your pda before doing any hard reset.your pda will install default parameters.
Save your data before any hard reset.
good luck.
phew! i just went to sell my SPV M600...as its being doing my head in an is long overdue for an upgrade. however, it decided to die in the shop! i was offered 50quid too, so i wont be goin back there, but i needed the money to get me through to pay day, (its something ive been puttin off doin fior awhile, but when moneys tight....) id just like to say a huge thank you for lettin me be able to reset my own phone, the Orange shop wanted £100 for a replacement (screw that!) an the car phone warehouse wanted to take the phone, send it to sweden, mess about with paperwork, an probably wouldnt have give me back till next year.
so, Thank you
P-Swish
PS...does anyone have any experience/news on the new Nokia N95? im lookin at upgrading to one, an well, if anyone has any bad experiences/insider info pls email us
hey bro !!
i got this imate jasjar 2 years back and i love my uni allot.
need a help from you bro...i am new to all these hav been goin through 100z of threads everyday bt not gettin my answers i hope you would help me out..!!
actually my jasjar suddenly started behavin weird it switched off by itself n wen i switched it back on after the windows mobile screen shows up my jasjar gets a dead blue screen n nothin happens.
tried to connect with active sync 4.0 and 4.1 bt it would not respond and show dat the phone is not connected.
i came across a thread in which a guy said to press bright light button + power button+softreset it sent my phone to a usb mode
then i used mtty tool and its command task 28 to check if my jasjar is wasted or still breathin lucky enough it dint give a formatfaliure msg and there were some steps i followed .
everything went as told n now m stuck on where to get official wm5 for jasjar and how to get out of the usb screen and how to flash the rom...??
please help
To exit boot loader mode: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
With regard to restorig WM5 - I have the official O2 XDA Exec files for their last software release. But I think you said your's is an iMate.You could see if the iMate version listed here: http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades is still available - if not maybe someone has a copy somewhere.
Hope this helps.
hey dat was gr8 bro....bt m still stuck with finding of wm5 for my imate ...!!
i found i mate upgrade bt when i clicked on download an error popped up "550 or 505 change of directory sumthin..."
well i followed the instructions u sent me it worked well bt still need to flash with wm5 ...!!
any chance of u or ur known havin a copy of wm5 rom
its been weeks and everything is gettin hazy ur help would be appriciated allot
thank you so much ..<!!
bro thankx for help i actually flashed my uni with kdskamal cooked wm5 bt my jasjar still gets dead on a greenish screen as it used to get before in blue screen wht m i supposed to do...??
Hi,
Try flashing with a WM6 rom (Tomal's ROMs are always good) and see if you get the same symptoms.
If you do then I suspect that you have a screen/cable connecting screen problem.
But lets rule out software first.
greetings bro...!!
i was up all night flashing wms
i used mtty software so many times that its commands are like hard weird in my brain cant get them out now....lolzzz
my stubborn uni was still stuck on the same dead screen but the only fun thing was that every time i flashed a new wm it used to get stuck on diff colours blue red green black...lolzzz
i scratched my head and i scratched my ass to an extent that i guess it started thinking lolzzz
i got some nice screw drivers and opened up my uni..
damn dis thing is wicked and messy it has things dat i dont know about n havnt even dreamd of in my stupidest dream i hav been lost in a computer motherboard with some good virus as my friend n some bad scary virus but in my uni motherboard i would neva..!
so i just fixed it back...n it worked for a while n den i dont know what tickled its ass.
busted again...!!
i guess ill hit the HTC service centre.
thanx allot bro
respect for ur effort and help...
Hi
for some strange reason the option "incoming com port" in the blue-tooth setting on my jasjar has disappeared. i was wondering if anyone else faced the same problem or if there is a way around it? editing registry n stuff.
because of this the previously paired devices are working fine but the new devices are unable to search the serial/com port facility on my uni.
i have tried resetting but still no luck.
any suggestions?
also i would really appreciate if someone could give me a solution for reading arabic and other such languages on uni.
(btw i am using i.e.TML 8.5 Rom and when i installed it at first the functionality was present so it cant be a ROM issue.)
...
lol... sorry abt earlier maite! i just realized the ridiculous thing i just did. i was supposed to post the reply to ur prob and then start with my sad story but somhow i managed to skip step one .
i m not expert on the device but i like it very much so i when i got one with my o2 contract i bought another one sim free just so that one would keep other company. as far as ur issue goes i have faced almost the same prob in the past and the solution was
1) rotate the screen 90 to get acess to screws at the bottom of the screen.
2) open the screws screws ... btw u might wana check if they are properly fastend before you try this step as i observed that if the screws are properly tightened this problem may solve itself... carrying on open the screws and that would detach the screen from the hinges.
3) where the hinge comes off strip open the cover a little bit and you will see two connections, one for the backlight and one for display (just like any other LCD screen.
4) press the big grip like thingee i.e. display connector with a flathead screw driver to assure they are properly in place. because in my case the connector had come off and hence was causing the system crash. although in my case the screen was only going blue after a while not the whole color palette.
just try if this one works because i m not sure if imate people are going to be any help in this case. i tried calling them a few months back for the lenscover and they said they dont support this device any more :S.