Hiya
recently installed the above, but now its attached itself to my left soft key. Ive tried chaning it in settings, but to no avail, alittle help pls
also does anyone have a screen bring of 'bootloader mode' should look like.
when i press the power+ok+reset it just goes into safe mode
cheers
Related
This Atom stops at the bootup splash and there is a string shown at the top left corner of the screen and this is it "20051129B2"
Not able to make the activesync recognize this handset.
I am able to enter the screen where it says to do a full reset press 'send' and 'end' buttons and when I press them it freezes....
Please help me out of the problem.....
abibaby said:
This Atom stops at the bootup splash and there is a string shown at the top left corner of the screen and this is it "20051129B2"
Not able to make the activesync recognize this handset.
I am able to enter the screen where it says to do a full reset press 'send' and 'end' buttons and when I press them it freezes....
Please help me out of the problem.....
Click to expand...
Click to collapse
Can you enter bootloader?
homer285 said:
Can you enter bootloader?
Click to expand...
Click to collapse
How do I do that...........
Is there any key combo to do that........
Help needed....
Bro it has been posted in so many threads....Press camera and soft reset buttons together.
homer285 said:
Bro it has been posted in so many threads....Press camera and soft reset buttons together.
Click to expand...
Click to collapse
Thanks homer285
I am able to get to the screen where it says
MN1 Bootloader built Dec 1 2005 ..........etc
and option to select 1 or 2
Whats the next step........
Hurray!!!!!!!!!!!!!!..........
You saved my day by giving that hint Bro....
Searched the forum and found lot of info on this.......
Put this Atom to bootloader mode and then flashed and worked like crisp now.......
""THE ATOM CAME ALIVE""
Thankyou buddy...
abibaby- atom bootloader flashed
got it .........
can somebody provide a step by step process once you get into the bootloader mode? I am able to get thru the bootloader mode but after choosing either the 1st or 2nd option, still I get stuck on the splash screen.
Hello
I took my friends xperia to install some applications when it happens this:
After i installed AEK software Keyboard Mapper the system asked me to soft reset the device to apply some settings.(The device during this procedure was connected via usb with the pc)
I press "yes" and as usual at the start up appears the sony ericsson logo then the experia logo and finally the device is active.But in my case the phone when it comes to the experia logo freezes..The screen remains illuminated but blank and when iam touching the screen(which is blank) i can hear the sounds of clicking.In this state if i want to shut down the device the only method is to take off the battery.I tried to hard reset the device(when its closed) but unfortunately it wont allow me to do so(i tried with all the possible ways to hard reset the device).At first i thought that the device had hasnt too much battery.I fully charged it and i tried again getting the same results.Please, can anyone tell me what to do?
Edit: After several tries it came up this message "The device is unable to boot because either you have turned off the device incorrectly or tries to install an application from untrusted source.Press volume up to reset or press any other button to cancel etc" Iam pressing the volume up button but nothing happens.Please can you tell me how to hard reset the device?
Here is a link to soft/hard reset tutorial
Hi
I assume you have removed and reinserted the battery?, try this first, if that doesn't work go here.
http://www.xperiax1.net/forum/xperia-x1/546-tutorial-soft-hard-resets.html
P.S This took me 10 seconds to find on google
Ian
Might have to hard reset, if you didn't install a safe mode boot program.
Ianmrr said:
Hi
I assume you have removed and reinserted the battery?, try this first, if that doesn't work go here.
http://www.xperiax1.net/forum/xperia-x1/546-tutorial-soft-hard-resets.html
P.S This took me 10 seconds to find on google
Ian
Click to expand...
Click to collapse
Thanks Ian but apparently you didnt read all the lines i wrote.I said "i tried to hard reset the device with all the possible ways but didnt work" including this way you send me.Thanks anyway
Problem solved
Doing this:
without using the stylus is to switch off the phone,
hold down right and left button (under the screen)
while holding down switch on the phone
release the switch button while holding the two others
then a grey screen must appear saying to push "r" to hard reset or "x" to cancel
push "r" on the keyboard and you're done
Hi Guys
I've done searches to find a solution, but I can't find any.
I flashed my gene (have done many times before). Somehow got things mixed up. And now it doesn't even want to go into bootloader.
Try rebooting, power button does nothing. When I hold "camera" button and reset the green & red buttons flash then nothing.
I have tried soft & hard reset, nothing works. Screen just stays blank.
Please help, I'm really in trouble.
Regards
Celliers
Sometimes this problem happens with me. You have to remove battery and press the power button sometimes (without battery), then put back battery and power on your gene. After this, try to go into bootloader mode and flash another rom.
i installed the Ezinput from http://forum.xda-developers.com/showthread.php?t=536215 for wvga... i installed it, then it said a reset is required to finish intallation. after the reset, it went to the touch diamond 2 boot up screen, after that was over, then screen displayed nothing. its black, and usb does not respond when i connect it to the computer. any ideas? i already tried the reset using teh red button. took out the memory card, where i install the .cab, still doesnt work. any help would be greatly appreciated.
If it's totally unresponsive from boot, hard reset it. Hold Volume Down and press the "red button" to reset it. It'll go back to factory settings.
same problem here, help needed!!
i tried to restore it to the factory setting using volume down and red button but when the phone flashes it shows me this three color screen with the message "serial" on the bottom side of the screen, any ideas on what should i do???
thanks in advance...
To perform a Diamond 2 hard reset
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see a message on the screen.
alwaysrun said:
i tried to restore it to the factory setting using volume down and red button but when the phone flashes it shows me this three color screen with the message "serial" on the bottom side of the screen, any ideas on what should i do???
thanks in advance...
Click to expand...
Click to collapse
What you did is boot in "bootloader mode"; in that mode you can try to flash again the original ROM.
thanks
thanks a lot guys, your help is well appreciated, i finally managed to flash the phone bios and now trying to install the original rom, thank you again
Hi friends,
I have a Samsung galaxy J5 2016 (SM-J510F/DS). It is continuously rebooting, it reaches till android home screen and reboots from there. While in the home screen it shows a msg (Android is Starting.....), and then it reboots. I have observed that all the button presses and touch is working for a short duration in between the reboots. I have searched all over internet and tried numerous ways to enter to recovery mode, download mode, nothing is working. My home button is also not working. Can somebody suggest me a way to enter to recovery mode so that I can do a clean wipe and start new. Please help. Thank you.
Hi,
Did you tried to make reset from within phone settings ? May be you are able to enter Recovery Mode after that!
( My Samsung Galaxy J 3 pro was almost in the same condition rebooting again & again, One Repairer even said that the display has gone but I was able to enter the recovery mode > Bootlaoder > Download Mode & flashed latest stock rom with ODIN > Working perfect now! )
I turned off the phone before it reboots. Once it was completely off, I pressed ''Volume Up + Home + Power'' Buttons all together, released them as soon as anything appeared / flashed on the screen, an installing update screen appeared & then I was right in the Recovery Mode with all the options.
Thanks.
Thank you for the reply, but my home button is not working.
boyuljalok said:
same case as me. theres a third party apps that let you go to recovery mode google "Ultfone Android System Repair" i recommend you to download on their official site, the only problem that this app has is your phone need to be on if its off the app wont detect it
Click to expand...
Click to collapse
My phone is rebooting continuously. Phone does not stays on.
alias_nike said:
My phone is rebooting continuously. Phone does not stays on.
Click to expand...
Click to collapse
you can try something extreme like shorting home button contacts, but it might be a bit difficult.
LR7875 said:
you can try something extreme like shorting home button contacts, but it might be a bit difficult.
Click to expand...
Click to collapse
Thank you for the reply. I will give it a try.