Related
Has anyone come up with a fix so that the GPRS is back to being always on as it was in the original 1.03 ROM? I have read some posts on this on other sites, but I have not found anything here. I assume that I have everything set properly, but the GPRS has to be started every time now.
In general I do not feel that the 1.06 ROM upgrade did much of anything to enhance my device, and quite frankly I wish I was back to 1.03, however, I have heard that a new ROM upgrade will soon be released and I bet that one or I hope that one will provide some real value and fix things.
I've posted this in another thread, here's the quote:
Here's a solution I've done to my XDA II with T-Mobile GPRS problem. I don't know who came up with this solution, but thanks to my friend who suggested this at PDAMobiz.com.
1. After a hardreset and completing the initial screen alignment, interrupt the auto-installation process by softreset your XDA II (you have 3 seconds before the files in Extended_ROM will automatically install).
2. Make your Extended_ROM viewable, whether by using the Extended ROM Viewer from http://www.ppcw.net or Extended ROM Switcher (sorry I forgot the link).
3. Now, install each cab files, except TMD_AP_NL.sa.CAB. In fact, I also disregarded, Caller ID, and some other TMD stuff.
As a result, the GPRS is now always-on as it should be.
Cheers,
Thank you for responding to this post. I had to wait quite awhile.
Your #3. states to install the cab files and disregard the TMD files. Did you delete these files or just not open them? What are these TMD Files for?
I assume that I cannot, at this point and without a hard reset, just delete the TMD Files that are viewable in my Extended Rom. Is this a correct assumption or could I accomplish the same goal by just deleting those files?
Thank You
gratefuled said:
Thank you for responding to this post. I had to wait quite awhile.
Your #3. states to install the cab files and disregard the TMD files. Did you delete these files or just not open them? What are these TMD Files for?
I assume that I cannot, at this point and without a hard reset, just delete the TMD Files that are viewable in my Extended Rom. Is this a correct assumption or could I accomplish the same goal by just deleting those files?
Thank You
Click to expand...
Click to collapse
Yes you need to delete does file from Extended_ROM and hard reset it.
Or hard reset, quickly soft reset after you finish the screen calibration, run the extended_rom viewer and manually open/run each of the cab files except the mention cab. ( basically follow exactly what jopard said ).
I read also somewhere in this forum that someone did a differrence search on the registry between GPRS always on and GPRS off when idle. With this method you can change the setting without hard reset.
Hi, the mentioned cab installs the following registry key (among others):
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Planner\Settings]
"CacheTime"=dword:0000003c
"SuspendResume"=hex(7):\
69,6e,74,65,72,6e,65,74,00,00,00,00
I guess it must be the SuspendResume setting. Can you post your setting without applying the cab file?
softworkz said:
Hi, the mentioned cab installs the following registry key (among others):
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Planner\Settings]
"CacheTime"=dword:0000003c
"SuspendResume"=hex(7):\
69,6e,74,65,72,6e,65,74,00,00,00,00
I guess it must be the SuspendResume setting. Can you post your setting without applying the cab file?
Click to expand...
Click to collapse
This is my setting running my own cook 1.60.06 skiping that file:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Planner\Settings]
"SuspendResume"=hex(7):7E,00,47,00,50,00,52,00,53,00,21,00,00,00,00,00,00,00,00,00
"CacheTime"=dword:00000258
And yes my GPRS is always on.
Hm, I'll try that, but I had another problem:
When I was always GPRS-connected my GSM-connection was always lost
after 12-24h. The device showed that it is connected but I could not dial out and I could not be called.
Now since I am not "always on" anymore I do not have this problem anymore.
Did you experience something similar?
softworkz said:
Hm, I'll try that, but I had another problem:
When I was always GPRS-connected my GSM-connection was always lost
after 12-24h. The device showed that it is connected but I could not dial out and I could not be called.
Now since I am not "always on" anymore I do not have this problem anymore.
Did you experience something similar?
Click to expand...
Click to collapse
Mine work fine I can call, received phone/sms while npop and aim is running in the background.
is there
Is there a way to do this without hardrestting? It just took me two hours to load all the program into XDA. Can I just hack the reg?
thanks
my rom
My rom does not even have this cab in the ext file. Can I hack it in the reg?
I have XDA II 1.50WWE ROM
thanks
softworkz said:
Hm, I'll try that, but I had another problem:
When I was always GPRS-connected my GSM-connection was always lost
after 12-24h. The device showed that it is connected but I could not dial out and I could not be called.
Now since I am not "always on" anymore I do not have this problem anymore.
Did you experience something similar?
Click to expand...
Click to collapse
I think you will find that many carriers have a "timeout" after several hours of non use.
Dave
SuspendResume
What does this look like in the registry:
This is my setting running my own cook 1.60.06 skiping that file:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Planner\Settings]
"SuspendResume"=hex(7):7E,00,47,00,50,00,52,00,53,00,21,00,00,00,00,00,00,00,00,00
I have PHM Registry Editor, and entering the entire string does not look like a meaningful option.
Is it a REG_DWORD with a base of HEX ?
Regards
Michael
I use resco registry editor you can just import in that registry.
I found another post regarding this issue:
http://forum.xda-developers.com/viewtopic.php?p=26866
I'm afraid I do not understand how this thread has evolved.
I understand the posts that speak to the hard reset and softreset within 3 seconds to keep the device ROM applications from loading. From there to install fix for viewing extended ROM files and then load everything except TMD, and perhaps some of the T-Mobile apps you do not want. Although the response says a specific TMD file and some other TMD-no specifics, all or some?
The balance of the thread seems to speak to radio settings.
Is it being said that you can change some settings on the radio stack and get the GPRS always on? If so how do you do this in reasonably simple terms?
Ed
Nonintrusive Keep-Alive
The intrusive solutions are enticing to me but they are for "developers". From a user's point of view, I am always worried about doing something and then not being able to restore it to the original state (or having to spend a lot of time to get back) should something go wrong. My bandage solution (unique to my use situation) is to open an ssh or a telnet window and run a shell script which loops to print the current timestamp and then sleeps for 5 seconds. A T-Mobile tier 2 tech guy told me that the disconnection was by design for the benefit of network service providers so that they can save on connection resources.
By the same token, I like the Keep-Alive application solution - I think it is worth my $2.45 (See thread http://forum.xda-developers.com/viewtopic.php?t=5220). I wonder if the to-come T-Mobile Windows PPC 2003 comes with some sort of control that is equivalent to the Keep-Alive application - in a matter of a month or two, supposedly.
regedit -goto
hklm/software/htc/engineermode/
and change buitinengineermode dword to 1
save
goto dial pad and enter: *#*#364#*#*
regards
Seth
I found that entry a few days ago. I tried it, but nothing happens.
What do you can see/do in engeneering mode?
Just tried it. It opened a tabbed dialog that shows all the info the phone is getting from the cellular network.
Tower number, GPRS settings and a lot of stuff I know nothing about. Nice diagnostic tool.
P.S.
funnysurf, did you dial the number correctly? For me it opened the second I entered the last *. (on Jamin, ROM 2.13.9.123)
It works... Latest Dopod ROM.
HTC Engineering Mode
I've been hunting for a way to see this info. I design cellular networks and this stuff is my second language. However, I don't see anything in any fields of GSM Test Mode. They start with "N/A" then immediately go blank. I've done the registry setting but no change. When I do the '*#'-thing, I get nada. Got any clues?
FYI- I found a program called NiceTrack that shows only some of this info, so I know it's in there somewhere, but I need to see more.
jott2me, post your ROM version. On the Dopod's 2.15 it works.
GSM Test Mode
The key word is “built in” If you have a little program GSM TestMode.exe in your windows directory, this registry tweak makes this program visible and executable. Plus don’t forget to soft reset your device in order for registry modification to take effect.
By the way, if you use this data a lot, you can make a shortcut to this utility as to any executable. No need to dial the *# a hundred times. Or just add it to your speed dial…
You guys sure respond fast! Wow! And thanks!
JWalker, here's my info:
ROM version: 1.8.10.2 WWE
ROM date: 12/10/05
Radio version: 01.09.10
Protocol version: 4.0.13.20
ExtROM version: 1.8.10.104
(I've only had this about a month so I'm leary of changing ROM versions.)
aleksandr,
I'm running Spb's Today screen (it's nice) and I've got an icon that puts me right into GSMTestMode.exe when the reg tweak is set to 1. I've reset several times still no luck seeing info. I made a contact with the '*#' stuff but when I dial it, I get, "The number you have dialed..." message.
Am I missing something?
Thanks for your help.
GSM menu
How did you reset your device, programmatic soft reset or with your stylus? Soft reset with stylus will erase registry modifications without saving them. Sorry, don't mean to use "dummy" talk, just want to make sure all proper steps are followed to eliminate all possible reasons in order to find the solution. Another reason for this issue could be in rom, but wait for J. Walker to respond. I'm in the office right now and don't have emulators here to experiment with your rom version. In the mean time make sure you’ve made all necessary registry changes in right registry entries, and soft reset using program, something like Nice start or shut down XP or SPB Pocket Plus reset function.
I've been using TRE to edit the registry then resetting it using the stylus and the hole on the right side. Every reg change I've made shows up after a reset as changed. I don't know of another way to soft reset it. Even when I've changed it back to 0 to try using JUST the GSM Test Mode.exe, it won't work. That's proof that the registry does see the changes (I think).
(... and I'm the newbie here so "dummy" talk is A-Okey doke w/ me.)
Guess, it is a good idea to change to 2.x ROM. The only thing I know that it works fine with my original S200 with Dopod's 2.15.13.27 ROM. It much morу stable and fast, so you will got the better feeling
Hi,
on Vodafone ROM 2.15.3.26 GER it does not work. I create an Link to \Windows\GSMTestMode.exe and do it that way
I tried creating the link to GSMTest but that still didn't work. I think I'm going to have to change ROMs. I'm very reluctant because I don't know where or how to get and install one. I've seen that this site is full of talk about ROM upgrades, but I haven't seen one that tells me how to do it.
The thing is that what I'm really really after is not just the GSMTest screen so it may or may not even involve a new ROM. What I really want is to learn where the info is hiding and how to display it and make some of it usable in graphical format (something like "NiceTrack" does but with all the info not just a couple fields). It's more of a programming thing. So if anyone knows where this info is stashed and how to read it, I'd go that direction. I thought that GSMTest would be a quick & easy step toward what I'm after.
any change someone could add the gsm test program. I did found the engineering key in the registry, but no program in the windows directory and entering the code on the phonedial pad didn't work as well.
i'm running tuma 1.3 wm5 rom on a qtec 9090
If you want a good guide to changing roms see this post
http://forum.xda-developers.com/viewtopic.php?t=52564&highlight=
sethxp said:
regedit -goto
hklm/software/htc/engineermode/
and change buitinengineermode dword to 1
save
goto dial pad and enter: *#*#364#*#*
regards
Seth
Click to expand...
Click to collapse
I'm sorry, but I have to ask this question. After a year or so of using these amazing little hacks I've always wondered one thing. . . How in the HELL do you folks figure out these things exist?!
I'm sorry, but I have to ask this question. After a year or so of using these amazing little hacks I've always wondered one thing. . . How in the HELL do you folks figure out these things exist?!
Click to expand...
Click to collapse
My thoughts exactly... I discovered this site 2 years ago when I had the Xda2 and I'm still amazed at the information that I can dig up here. Guess some of us have the privelege of playing with our gadgets more than others...
i had to go into the props of the file and change it from hide. i also had to use resco and searched for the file name and changed it there. from there i copied the file and choose poaste shortcut to the windows\start menu\programs
I am a frequent traveller, I travel a lot between Eastern and Central Time zones.
When my PPC was on WM5 it used to Auto update the time no matter which state I used to be in.
But ever since I updated my PPC to WM6 the AutoUpdate of clock stopped working. Can someone help me out
i did find a registry entry which I used.. I do timezone tab in Phone settings and it is checked to autoupdate and still the phone is unable to update the time from network.
anyhelp is greatly appreciated
You are seriously wondering why you are not getting full functionality out of a bootlegged OS?
chichu_9 said:
I am a frequent traveller, I travel a lot between Eastern and Central Time zones.
When my PPC was on WM5 it used to Auto update the time no matter which state I used to be in.
Click to expand...
Click to collapse
I can't help with the WM6 question...but I am curious how you managed this with the WM5 OS. I have an 8125 and apparently a similar travel pattern. My device NEVER updates the time based on the network. How did you set this up when you were still running 5?
I am interested in how you got it working as well. Mine did not update once from the east coast to the west coast. Not even when making a call.
well i have a reg tweek that will change the time when you enter a diff time zone via the network...hope this is what your looking for....
Timezone and time update
In the branch HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword). Close your registry editor (no reset required) and tap START-SETTINGS-PHONE, there should be a new tab where you can automatically set the phone to get time and timezone information from the network. Really useful for me as I do extensive travelling. Tested on WM5
ugahairydawgs said:
You are seriously wondering why you are not getting full functionality out of a bootlegged OS?
Click to expand...
Click to collapse
thats why this is called xda-developers. we'll find a way to make it work.
btw how did you get the new wm6 on your wizard....is there a link..
yes, i was wondering where the wm6 rom download is also.
>> bj///////////////////////////////////////////////////
RiNo808 said:
Timezone and time update
In the branch HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword). Close your registry editor (no reset required) and tap START-SETTINGS-PHONE, there should be a new tab where you can automatically set the phone to get time and timezone information from the network. Really useful for me as I do extensive travelling. Tested on WM5
Click to expand...
Click to collapse
Yes! Its there on WM6 too!!!! Dont know if it actually works, yet to travel in a different timezone.
I have had it enabled in my registry in WM5 and WM6. It's NEVER worked for me. I change phones a lot so I'm always taking out the SIM card. When I do this, the battery comes out and it loses time/date.
I'd be curious on the details as well because I've never heard anyone that actually had it functioning!
-Mc
I tested this tweak and it seems to work when I initiate flight mode and then turn flight mode off (which will be great when I land on the plane...the time will adjust automatically).
Will this update periodically check the time to ensure it's sync'd or will this only work when the phone initially communicates with the network?
acording to microsoft list of bugs in all from aku1 to aku3 this feature never worked and they never fixed it..... since crossbow has several parts of old aku roms my guess is it does not work either..... this feature is also carrier dependent if you manage to make it work.
faria said:
acording to microsoft list of bugs in all from aku1 to aku3 this feature never worked and they never fixed it..... since crossbow has several parts of old aku roms my guess is it does not work either..... this feature is also carrier dependent if you manage to make it work.
Click to expand...
Click to collapse
My carrier supports it. My Wizard never did with the ROM hack or with Crossbow. So if it worked, I'd love to find out how! This at least makes me feel good that I'm not missing out on something...
-Mc
McHale said:
My carrier supports it. My Wizard never did with the ROM hack or with Crossbow. So if it worked, I'd love to find out how! This at least makes me feel good that I'm not missing out on something...
-Mc
Click to expand...
Click to collapse
upon doing some more reading aparently some aku3 roms now support it!!!
but in a diferent way. here it is;
Receiving Network Identity and Time Zone(NITZ) information is currently unsupported.
This feature was incorrectly documented to be supported by Windows Mobile Version 5.0 AKU3.0 in Windows Mobile Version 5.0 Documentation Release. NITZ is currently supported at Radio Interface Layer(RIL) only.
Click to expand...
Click to collapse
OK, so apparently this functionality is in fairly high demand...and since we're talking about WWAN devices, hasn't someone written an app that will periodically ping a time server (like PC OS's) and update the time on the device?
I am NOT a developer, so maybe I'm missing something obvious here. But it doesn't seem like a complicated concept for sure.
registry wizard does this
the xda-developers registry wizard allows you to make the registry tweak "show time zone s page" in both WM5 and WM6,- this put the time zone tab in phone-options, but the feature never worked for me. I called my provider to confirm if they supported it but the help desk was clueless- Would love to see if anyone got this working.
Confirmed working on my 8125 through the Cingular network. Before the hack I had to initiate a physical active sync through USB or manually change the time. Now if I go and change the time to say an hour ahead within 5 -10 seconds the time reverts back automatically.
ctgoodman said:
Confirmed working on my 8125 through the Cingular network. Before the hack I had to initiate a physical active sync through USB or manually change the time. Now if I go and change the time to say an hour ahead within 5 -10 seconds the time reverts back automatically.
Click to expand...
Click to collapse
what ROM are you using? I'm on Cingular in IL and it doesn't work here.
-Mc
Interactive said:
OK, so apparently this functionality is in fairly high demand...and since we're talking about WWAN devices, hasn't someone written an app that will periodically ping a time server (like PC OS's) and update the time on the device?
I am NOT a developer, so maybe I'm missing something obvious here. But it doesn't seem like a complicated concept for sure.
Click to expand...
Click to collapse
Here is a quote and a link to a program I found on the Cingular/HTC forum:
"How hard would it be to go to the clock settings and select the "visiting" button and select the time zone you are in?
Works for me.
There are options for atomic clock server time sync. But that won't address time zone issues.
http://zdnetasia.com/downloads/handheld/swinfo/0,39043246,39175141s,00.htm
"
I don't go out of my own time zone, so I don't really have any issues with it. The registy hack has worked just fine on my 8125.
I somehow had WPA working before, but now there is no option for it. I'm using a 2.25 tmo ROM and 2.25.11 cingular radio.
boink
I know it's possible-someone say something.
I had problems linking to my 8125 to my Belkin router until recently. I'm not sure if it was because I downgraded the security from AES to TKIP. It functions on both WPA and WPA2. Someone suggested that one registers the PocketMSN on the device and I noticed that the connection was alot easier. I'm not really sure why. Good luck.
I mean WPA does not appear at all in the dropdown list, I can't use it.
12340987 said:
boink
I know it's possible-someone say something.
Click to expand...
Click to collapse
If you say it was an available option before, and now it's not, then the obvious first question is: What did you change? Have you been editing the registry or modifying/adding any other apps?
Doesn't seem like the feature would just disappear on it own.
I don't remember, I haven't had this long and was experimenting. I think it may be the ROM version, who else has the t-mobile 2.25.11 ROM but no WPA encryption ability?
I was hoping it would be a radio ROM or registry edit, because I really don't want to load another ROM and have to reinstall and configure everything.
I tried to use the Internet Sharing option when connecting to a laptop - just like I did with the original ATT Tilt - but I always get Invalid APN. Does everybody get the same and is there a work-around?
tethering
check to see (upon running Internet Sharing)
under Network Connection
my TP2 shows 2 options
MEdia Net
and one for GPRS A&T
the only one that works for me it MEdia Net
please post if you have those options and if it worked.
internet sharing
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
AT&T blocked option to change connection type so you have to change that in reg.
Now just softreset and enjoy.
PS
I'm using it right now
tether tweak cab for att stock?
emilware_v1.1 said:
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
Click to expand...
Click to collapse
Hey I don't have my Tilt 2 yet so I can't test this but I cabbed up your changes. Maybe one of you with Tilt2 MEdia Net could test this sucker out? First make sure you are currently unable to tether and then install and soft reset to see if it fixed it. Report back!
edit: cab removed, report of no success
Doug
d0ugie said:
Hey I don't have my Tilt 2 yet so I can't test this but I cabbed up your changes. Maybe one of you with Tilt2 MEdia Net could test this sucker out? First make sure you are currently unable to tether and then install and soft reset to see if it fixed it. Report back!
Doug
Click to expand...
Click to collapse
Doug, it didnt work for me...
This is the correct reg
"HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCONNECTION CHANGE TO "MEdia Net""
I updated it manually and it doesnt stick. Its forcing me to the other APN still....
bhyde said:
Doug, it didnt work for me...
This is the correct reg
"HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCONNECTION CHANGE TO "MEdia Net""
I updated it manually and it doesnt stick. Its forcing me to the other APN still....
Click to expand...
Click to collapse
Thanks for reporting back, removed the cab from my post. So yours is the correct key but it doesn't stick.... hmm. Sounds like flashing a custom rom might be the only way out unless you put a registry tweaking thing in startup.
I just tried this using AT&T Tilt 2 on the stock ROM and it worked.
I could not find any such key called "HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING" so I ignored that part.
I changed HKLM\Comm\InternetSharing\ForceCellConnection to "MEdia Net".
I reset the phone.
I tried to share through a USB connection, but it kept appearing on my computer as a hard drive despite selecting the option for Internet Sharing.
So instead I tried sharing through Bluetooth PAN. It was actually easier than it used to be on WM6.1. I selected Connect from the Internet Sharing program and it brought up a list of Bluetooth pairings. I selected my laptop (win7), which I had previously paired for ActiveSync purposes. The phone said "connecting to computer" and then "connecting to internet" and then it was done.
I accessed websites on my computer and refreshed to make sure it wasn't cached. I checked that my computer's wifi was disabled and that the phone's wifi was not on. Looks like it works.
HKLM\Comm\InternetSharing\Settings\ForceCellConnection to "MEdia Net"
and
HKLM\Comm\InternetSharing\Status\Enabled to "1"
I changed HKLM\Comm\InternetSharing\Settings\ForceCellConnection to "MEdia Net" and it worked. Thanks for the help.
Question...on the stock ROM, does the built-in connection use the wap.cingular connection or the isp.cingular?
I heard it was wrong to use isp.cingular. Should we create a new profile specifically for wap.cingular?
emilware_v1.1 said:
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
AT&T blocked option to change connection type so you have to change that in reg.
Now just softreset and enjoy.
PS
I'm using it right now
Click to expand...
Click to collapse
It Works!!!
thanks
Thank You! I am using it now.... Only After installing TotalCommander ( in the Rhodium Software sticky) to eaily do the regedits,
Worked for me. Nicely done!
emilware_v1.1 said:
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
AT&T blocked option to change connection type so you have to change that in reg.
Now just softreset and enjoy.
PS
I'm using it right now
Click to expand...
Click to collapse
This method worked for me. Thankfully I have a tetherable TP2 now ^^...only thing is the connection sucks until AT&T fixes their network. Takes forever to load a simple page....
Why can i not find the HKLM folder in total commander.... cause id love to be able to tether my phone....
hixmatt said:
HKLM\Comm\InternetSharing\Settings\ForceCellConnection to "MEdia Net"
and
HKLM\Comm\InternetSharing\Status\Enabled to "1"
Click to expand...
Click to collapse
That works great for me, but after soft reset "HKLM\Comm\InternetSharing\Status\Enabled" reverts back to Value of "0". To use Internet Sharing, I have to edit this value after every soft reset. Any possible fixes for this? Thanks in advance!
Stock AT&T Tilt 2
Edited To Add: It finally stuck! No idea why it took so long.
calexan said:
Why can i not find the HKLM folder in total commander.... cause id love to be able to tether my phone....
Click to expand...
Click to collapse
Doesn't sound like your ready to play with registry (no offense). Always know you can cripple Windows if your not careful. You have to open the "\\Plugins" folder at the top of the root dir of the phone and then select registry. Follow the given instruction from there. Again though, be careful.
Oh im sure im not.... I dont think ive messed with a registry since my Moto v620 years ago. My Tre0 750, just had every cab i ever needed already made.
If its not sticking though... i guess theres really know point till someone figures this thing out. I hate how AT&T blocks certain features....
calexan said:
Oh im sure im not.... I dont think ive messed with a registry since my Moto v620 years ago. My Tre0 750, just had every cab i ever needed already made.
If its not sticking though... i guess theres really know point till someone figures this thing out. I hate how AT&T blocks certain features....
Click to expand...
Click to collapse
======== (UPDATED 11-30-2009) ========
NOTE! -- THIS IS ONLY FOR AT&T CUSTOMERS
I have made a cab version of my fix so that mortscript isn't required. Simply install and restart your phone and your ready to go! (much easier instructions eh?)
That's it!
Works great on my end.... other than AT&T's terrible internet service.
I appreciate the time you took to write the scripts. Havnt figured if they stick though, but now that its easily changed back no worries.
Thanks man