my mda won't turn on and when i remove battery screen flashes white
more info
when it does turn on then it freezes and like it dies cause the screen fades out
try to get it into bootloader, i had the exact same problem with my SP3i, its gna take a few attempts to get it into bootloader. once you've got it into bootloader, run an official rom update for the mda.
good luck
no luck
still carn't get into bootloader , i manged to get it all up and running but it has died again [email protected] i think i ****ed my boot loader
Related
hello. i have an o2 i-mate jasjar phone. i updated my rom and since then my phone wont start up.
i tried going into bootloader mode and re-installing any rom that i could find with that mtty program, even with the original rom, the
the rom installs just fine, but when i do the hard reset the phone goes up to the start up screen showing
the rom info and just stays there.
i also updated the bootloader from v1.00 to v1.01 to see if that fixes anything but no luck.
does anyone have a clue of what is going on?
p.s when i connect the phone with ac power the led that shows if the phone is charging wont light up. dunno why! :S
PLEASE HELP ME!!!
does anyone has a clue of whats going on???
i really need some help here please!!
there are some progs on wiki. Instructions for those stuck on bootscreen.
i am not stuck on boot screen. i am stuck on the screen that shows the ram info, i think its called splash screen....
can somebody help me?
Stupid me...
I bricked my G3 while updating to faria's WM6, but stupid me I had IPL/SPL at 1.xx. Now after the stupid try, I semi-bricked my Wizard, but was still able to go into the bootloader screen. So I decided to reload Cingular 8125 2.25 on it tomorrow.
Well today is tomorrow, and right when I was about to load up the factory ROM, bootloader screen and all, it shuts off. Battery isn't dead, cause yesterday it had a full charge and it wasn't running all night (semi-bricked, mind you). And now it won't come on.
Oh wait... it just came back on...
Crap, nevermind, it shut itself off again.
What's going on? It can't be bricked if every hour it decided to give me a bootloader screen to tease me for ten seconds?
If I wanted to be teased, I'd call my ex-girlfriend...
flash the stock rom when it's on, leave it connect to the usb. try a hardware key hard reset to enter bootloader screen
Got it. The problem was getting it on really. But I figured it out and got it charged. Now I got custom firmware on it. Thanks
seems like i have the same problem. the bootloader screen appears for 5 seconds and then it's gone again.
how did you manage to charge it?
Hi,
I have a big problem, i when i started my SPV M650 (Orange phone) 2 days ago it didn't want to start (blocked on orange splash screen) so i made a hard reset and it was working.as i didn't want to keep orange OS i tried to flash it.
As a newbie, i tried to flash it with a HTC Rom without unlocking the CID. and..... didn't work !
Retry : updater says no system at all was installed on the phone then, it had passed by and installed the rom (don't know why)
yap, installed but didn't work! still blocked on splash screen sometimes go on WM6 welcome screen and one time accessed the Windows Mobile.
And one hour later.... black screen !
So, i tried to reflash it in bootloader mode with the original orange ROM, it worked, but still blocked on the orange splash screen and the OS version written on this screen was 1.84.0.0 (it should be 1.84.73.2) and screen was brightening so reflash a second time with that original rom, error 276: update error. Now everytime i start the phone, it is in bootloader mode with RUU written on it (in update process i suppose) and everytime i retry to update, error 276: update error. then tried with SD card: card no recognized and still blocked on the bootloader mode update process.
So,
- is there a way to update or flash the bootloader ?
- has my phone his hardware totally crashed
(because i think orange won't never accept warranty, even in normal way they only accept it when you are dying front of their door, and its not sure if they could kill you just for pleasure they'll do)
i was running the button program and it stopped at 98% and the bar turned red. i did the recovery process and got the colored screen. after that i couldnt active sync phone with computer, i turned the phone off and now cant get it to turn back on. i am f$#%ed arent i
any help would be wonderful.
thanks
Which is your device,G3 or G4 ? well,if its a G3,then try to get into bootloaders (multicolor screen),if it gets there,try to flash Button's Rom again,but if its a G4,then I'm afraid it might be 'Bricked',still try to get into bootloaders,if it gets there,then its safe.
Cheers!
Don't worry i bricked my G4 like 3 or 4 times already but managed to revive it lol
If yours is a G4,
-enter bootloader ( i think camera+soft reset button) -- if you can't get into bootloader, maybe it's time to pay a visit to service center
-flash using wizard love ROM, just use the RUU included in the rar file, if you're not italian, just "Avanti" means something like next (http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar)
-After installation is finished and your device is alive again, install EnableRapi.cab and Cert_SPCS.cab
-SOFT RESET
-Let it reboot until you get into the today screen (ignore the ugly splash, that's the price you have to pay to get your device alive.. )
-Re-flash WM6 using Shelltool, read the shelltool documentation and make sure you don't miss anything.
I read there are easier method like soft and hard SPL, but never try. The above is what I always do when I brick my wizard.
its a g3
but the thing is everytime i try to turn it on, nothing happens. The first time, after it stopped at 98% i turned it off and got the bootloaders screen, but active sync didnt work, then i turned it off again and it never came back on. the next day when i got home, try to turn on and nothing. Also when trying to charge phone, no orange light shows up. anything you can think of will be awesome
thanks
chris
dead battery perhaps? try borrowing one of your friend's charged battery.
I bricked my wizard several times but never got to that "really dead" point.
The only thing I can think of is just, IF you managed to get that bootscreen again, and can have your wizard alive long enough to flash, don't turn it off again, but try re-flashing using RUU (they worked on bootscreen even though active sync is not connected). I also don't have experience reviving G3s, maybe another member with G3 can help?
ok since i got this phone i have had problems,but i updated it to 6.1 and it got better (locking up all the time)then i played with a bunch of custom roms,then the other day it just decided not to turn on at all,before it would just lock up at the htc screen,now when i turn it on the green light is on and nothing happnes?? i force it in the loader screen and have tryed getting it to take a rom that way and it just gets stuck and says loading but dosnt do anything? the update utilitly does not work either it keeps saying image is currupt?
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Hope it helped and good luck,
What version bootloader do you have? What image are you trying to load in bootloader.
i have opilo_240. i cant load any image nothing will take,no roms no radio no nothing
Are you sure you are naming it correctly and on a 2GB or less FAT32 sd card.
i have tryed it a million times, yes i have been typing it right.it recognizes it and starts to load it but then locks up. is there a way i can get this loader off the phone and take it back to original? maybe the loader is crap so if i try and put a original loader back in it will take a install again but i cant find any thing
Not possible that I know of to change bootloader without softspl which needs WM to run.
Where are you getting these images? What is your provider. Please update this in your profile so we can help easier.
my provider is metro pcs but its a sprint phone,i have tryed the sprint/htc 6.1 update then i tryed a couple of ryan mogul 6.5 roms.see since i got this phone (used) it had problems loading from the htc screen,sometimes i would have to soft reset about 5 times before it would load the o/s then sometimes it would go days without a problem,it did this with the stock image then got better with the 6.1 and thought it was good then i played with a couple roms and they all loaded ok but the phone was getting worse when locking up it would do it all the time,then i went back to the 6.1 sprint rom and it didnt get better just worse,then it wouldnt get past the htc screen,so i tryed again to put back to stock and now when i turned the phone on it vibrates then just the green light turns on,when i try and hard reset it just instantly says complete,i can boat to loader and connect to pc fine but when i try and load a image from cpu it goes to 1% then stops and says image file is corrupt, is my phone junk? i have a brand new touch pro coming today but i would like to get this mogul up and running its just a shame cause i loved this phone when it worked,im ready to throw it in the garbage
Get the .nbh from the following sprint .exe and try it on the sd card. If you can get into bootloader your phone shouldnt be a brick. Mtty might be an option but that isnt something I can teach you how to do very well.
ftp://ppcgeeks.com/Titan/CarrierRom..._RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship.exe