I need a copy of the Internet Sharing program... i cant seem to find it. if someone could post it or post a link that owuld be great. thanks
~Stefanelli~
Do you have AKU2 or AKU3? If the latter, you already have it. If the former, you can NOT install Internet Sharing directly as it depends on a vastly changed Bluetooth stack.
Related
Hi,
I have a WiFi Netgear DG834GT 108 Mbps Router. No problem with internet access...but I would like to share files with my PC. How can I do? What SW should I need on my JJ and hoe to set router and JJ both to get them work?
THX so much for any help!
the easiest way is to use something like Resco File Explorer, an advanced version of the bundled file exploroer in WM5.
It costs about 20 dollars i believe.
Once installed, map your network drive to your home network and it should see it and file transfer will then be possible, as long as your shared folders are correct etc, as per any network
bryson said:
the easiest way is to use something like Resco File Explorer, an advanced version of the bundled file exploroer in WM5.
It costs about 20 dollars i believe.
Once installed, map your network drive to your home network and it should see it and file transfer will then be possible, as long as your shared folders are correct etc, as per any network
Click to expand...
Click to collapse
Thx for your reply,
I just want to use Resco File Explorer plug in called "My Network"...but it doesn't map any drive. I also have tried to change JJ setting in "configure network Adapters/My network card connects to" from "the internet" to "Work", but coming back to RescoExpl. and trying to Map Drive option, it didn't find anything once again.
Please help me with config if you can.
THX a lot!
ok, you have resco file explorer, so open it up, hold your styli on the My Network tab on left, and select map drive. A new window will open as it searches for your home network/pc shared foler etc. if it fails to find it like that, check you 'Hive' PC's name and make sure you have a folder selected to Share. Try that and let me know. (PS make sure wifi is on first on both exec and router!)
Thank you very much I DID IT!
:lol:
Well Done!!! Thats great glad to help, now enjoy streaming your music and videos to your exec whilst in the bath/garden/sofa!!
My good friend...
can you help me to let my JasJar print via WiFi??? In other words, is it possible to launch a print from JasJar via WiFi, by shareing my PC printer?
Am I asking too much?
:wink: :wink: :wink:
Hey hey!
aha! The only way i have ever done it unfortunatley is through terminal services client. So, open say, a word document from either your server PC or on your pocket PC, and save back to the shared on your desktop on your server PC and then via Terminal Services remote desktop and open the doc from your JJ screen and send to print from you server PC!
Long winded I know, anyone else got a better solution?
Hope that helps!
Uhm..I still have not tried your solution...but do you think there is any third party software that can do it, simply shareing printer via WiFi?
ill have a look, never really had a need myself, but ill have a look around, might be a good thing! Ill post if i find anything ok
Ok, thx...I'll take a look around too. I thought it would be useful for example if you receive an email on jasjar and you should print it to have it like a document...without further steps, directly from JJ...
HP has printer drivers for PPC!
They even support some Canon printers..
uhm..I have found Print Pocket CE, but it doesn't support WM2005 Office files, and PrintBoy...but I don't' know if it is compatible...
Any suggestion?
Hi All,
Its been a mystery to get this working. I just upgraded my Cingular 8125 to the officieal AKU 2.2 Rom from Cingular. Before that i tried a couple of products like V-Mobile Network browser, NetUse, Pockt Hosts etc and nothing helped me access my laptop from my Cingular 8125. Then i was trying out FilePoint Exchange and it works but doesn't allow two way transfer of iles as i wanted. Then i uninstalled it from my Laptop & PDA and BOOOOM.. I could setup File shares using Resco File Explorer and V-Mobile network Brower on my Wizard. I didn't do anything different.
Now after upgrading to the new ROM the sharing no longer works. I have tried the same trick on installing and uninstalling filepoint but of no use. Has anyone been able to get this working.
My laptop has a Default workgroup and using NetUse and V-Mobile Network Explorer i have made that workgroup as the default workgroup of wizard. Also using pockt hosts i have setup the Hostname and IP mapping. Still it doesn't work. Can someone please help me please please please......
Cheers
Zobie
well no neo replied but i was able to figure it out on my own.. lemme know if someone needs it..
Cheers
Zobie
I don't NEED it right this second, but it would be nice to know in case I do in the future. Could you tell us what you did?
Well you need a couple of programs as i mentioned in my 1st post. After that you need to change the settings on your card to "Connect to Work instead of internet". also please be sure there are no proxy settings on your Connection settings. Do add your laptop as a host with hostname & ip mapping. I thik you shouldn't have any problems loking up your laptop with Resco explorer or Netuse.
Cheers
Zobie
zobie said:
well no neo replied but i was able to figure it out on my own.. lemme know if someone needs it..
Cheers
Zobie
Click to expand...
Click to collapse
Hi, My phone (O2 Mini S) connects to my laptop and I can get an IP address, now I want to know can I browse files on my laptop without any 3rd party software? Also is it possible to browse the net, making my laptop as an access point? Thanks.
Hi,
Found lots of interesting little programs for my Windows Mobile phone recently, but one thing I can't find.
I want to be able to access the files on my phone from the network, via wifi (as a normal file share). I know it can be done the other way around, ie I can see files on the network from the phone, but haven't found anything to make the phone share its own files.
Is this possible? Can't see any particular reason why not - networking obviously works the other way, I know you can get http and ftp servers for the phone. Am I just missing something?
If there isn't a program out there that can do it, is it because no one's found a use for it and so not developed it, or is there a technical reason why it can't be done?
Any help much appreciated!
David
google this:
Mocha FTP server
Hi!
Sorry if this question has already been answered, i could not find a solution to my problem.
I want to access the data on my WM6 Device from another PC in the same network. I know that there are no networkshares available in WM6. But there has to be a possibility to access my data on PPC from a PC over Wifi. I know that i could do it vice versa, but i want to access my whole device via network. does anybody know a solution? Maybe with the help of a ftp software on my device? Thanks in advance!
Push.
No ideas??
Yeah, I was looking for exactly this, but found nothing.
I would also like to know if it is possible to create Shares.
ok, i found a solution.
use a ftp-server program on your ppc and you can access your whole device on an pc in the same network. i use the freeware "Mocha ftp server" for this. you can deny anonymous access and create useraccounts with password for secure and protected access.
hope this helps some people
All,
I have setup a WiFi router on my PDA and want to connect a WiFi camera to it. When pictures are taken I want to be able to store them on the PDA.
I have successfully got two PDA's connected by the router.
I can do this with a laptop but I need to be able to map some form of drive to my PDA.
Can I do this?
Thanks,
Sam
install resco explorer and map a network drive,within resco you should then be able to see the drive via wifi.
Thanks for your suggestion but I think that this is going the other way than I need to go.
I may have found my solution as I can run an FTP server on the PDA and the camera can do an autosend via FTP client to the IP of the PDA FTP server.
Not ideal but at least it is a start.
The Rescoe approach I thought would only allow me to connect TO a destination and not share my Storage Card out. Am I right?
Thanks for taking the time and interest, I was beginning to despair that anyone would respond at all,
Kind Regards,
Sam.
The only thing I have found so far is the FTP route.
I was using mocha FTP server and it's default set for anonymous login.
http://www.mochasoft.dk/freeware/ftpd.htm
I haven't found anything other than that.
PianoSam said:
Thanks for your suggestion but I think that this is going the other way than I need to go.
Click to expand...
Click to collapse
For what it's worth you are correct about this.