Hi All,
Its been a mystery to get this working. I just upgraded my Cingular 8125 to the officieal AKU 2.2 Rom from Cingular. Before that i tried a couple of products like V-Mobile Network browser, NetUse, Pockt Hosts etc and nothing helped me access my laptop from my Cingular 8125. Then i was trying out FilePoint Exchange and it works but doesn't allow two way transfer of iles as i wanted. Then i uninstalled it from my Laptop & PDA and BOOOOM.. I could setup File shares using Resco File Explorer and V-Mobile network Brower on my Wizard. I didn't do anything different.
Now after upgrading to the new ROM the sharing no longer works. I have tried the same trick on installing and uninstalling filepoint but of no use. Has anyone been able to get this working.
My laptop has a Default workgroup and using NetUse and V-Mobile Network Explorer i have made that workgroup as the default workgroup of wizard. Also using pockt hosts i have setup the Hostname and IP mapping. Still it doesn't work. Can someone please help me please please please......
Cheers
Zobie
well no neo replied but i was able to figure it out on my own.. lemme know if someone needs it..
Cheers
Zobie
I don't NEED it right this second, but it would be nice to know in case I do in the future. Could you tell us what you did?
Well you need a couple of programs as i mentioned in my 1st post. After that you need to change the settings on your card to "Connect to Work instead of internet". also please be sure there are no proxy settings on your Connection settings. Do add your laptop as a host with hostname & ip mapping. I thik you shouldn't have any problems loking up your laptop with Resco explorer or Netuse.
Cheers
Zobie
zobie said:
well no neo replied but i was able to figure it out on my own.. lemme know if someone needs it..
Cheers
Zobie
Click to expand...
Click to collapse
Hi, My phone (O2 Mini S) connects to my laptop and I can get an IP address, now I want to know can I browse files on my laptop without any 3rd party software? Also is it possible to browse the net, making my laptop as an access point? Thanks.
Related
Hi,
I have a WiFi Netgear DG834GT 108 Mbps Router. No problem with internet access...but I would like to share files with my PC. How can I do? What SW should I need on my JJ and hoe to set router and JJ both to get them work?
THX so much for any help!
the easiest way is to use something like Resco File Explorer, an advanced version of the bundled file exploroer in WM5.
It costs about 20 dollars i believe.
Once installed, map your network drive to your home network and it should see it and file transfer will then be possible, as long as your shared folders are correct etc, as per any network
bryson said:
the easiest way is to use something like Resco File Explorer, an advanced version of the bundled file exploroer in WM5.
It costs about 20 dollars i believe.
Once installed, map your network drive to your home network and it should see it and file transfer will then be possible, as long as your shared folders are correct etc, as per any network
Click to expand...
Click to collapse
Thx for your reply,
I just want to use Resco File Explorer plug in called "My Network"...but it doesn't map any drive. I also have tried to change JJ setting in "configure network Adapters/My network card connects to" from "the internet" to "Work", but coming back to RescoExpl. and trying to Map Drive option, it didn't find anything once again.
Please help me with config if you can.
THX a lot!
ok, you have resco file explorer, so open it up, hold your styli on the My Network tab on left, and select map drive. A new window will open as it searches for your home network/pc shared foler etc. if it fails to find it like that, check you 'Hive' PC's name and make sure you have a folder selected to Share. Try that and let me know. (PS make sure wifi is on first on both exec and router!)
Thank you very much I DID IT!
:lol:
Well Done!!! Thats great glad to help, now enjoy streaming your music and videos to your exec whilst in the bath/garden/sofa!!
My good friend...
can you help me to let my JasJar print via WiFi??? In other words, is it possible to launch a print from JasJar via WiFi, by shareing my PC printer?
Am I asking too much?
:wink: :wink: :wink:
Hey hey!
aha! The only way i have ever done it unfortunatley is through terminal services client. So, open say, a word document from either your server PC or on your pocket PC, and save back to the shared on your desktop on your server PC and then via Terminal Services remote desktop and open the doc from your JJ screen and send to print from you server PC!
Long winded I know, anyone else got a better solution?
Hope that helps!
Uhm..I still have not tried your solution...but do you think there is any third party software that can do it, simply shareing printer via WiFi?
ill have a look, never really had a need myself, but ill have a look around, might be a good thing! Ill post if i find anything ok
Ok, thx...I'll take a look around too. I thought it would be useful for example if you receive an email on jasjar and you should print it to have it like a document...without further steps, directly from JJ...
HP has printer drivers for PPC!
They even support some Canon printers..
uhm..I have found Print Pocket CE, but it doesn't support WM2005 Office files, and PrintBoy...but I don't' know if it is compatible...
Any suggestion?
Hiho,
Somehow I dont manage to get into the internet thought my USB Cable and the Computers Inet Connection, allthought I have set the option in Active Sync (4.5 Beta)...
Do I have to do additional things?
Using Jesters 3.3 AKU ROM...
Greets
Oliver
Well my friend to tell the truth,I tried doing that for 2 days (since I bought my little machine) and still can't do it...When my brother had Qtek 7070 I just pluged in and Internet worked...But now...well,troubles...PLEASE GOOD PEOPLE IF SOMEONE CAN HELP US WE WOULD BE GREATFULL...Greetings!
I am not sure if there is something specific for the 3.3 ROM (or any other custom ROM) but here is what you normally do:
First, make sure that in Settings->Connections->Connections->Advanced->Network selection->Programs that connect to the internet use...
you select 'My ISP'.
Then in PC side Activesync->Connection settings (right click the tray icon) select 'This computer connects to' -> 'The internet'.
Now make sure all firewalls are off or check MS site on how to allow ActiveSync for your firewall (this includes XP built in and 3rd party firewalls).
Hope this helps.
Sadly no success....
Prob with Internet connection
Hi everbody,
i've got a problem with my xda neo too. There is no way to use the pocket internet explorer or the wheater plugin from www.pocketnavigation.de, but icq works. There is no possibility to use the net via ActiveSync (4.5) or via W-LAN. But on both connections i could ping the device.
It seems that there's a problem with the device, but i don't know, where i should look to solve the problem.
Please Help!!!!
Karsten
I had the same problem with my O2 XDA Neo. It manifested as "error report NoXXXXXX" when I try to open the page in PIE.
Recently I find an Registry Add that solved my problem. Download to desktop and add it in PC registry (not PPC)
Hope that will help!
I am trying to access my LAN shares from the Hermes.
My hermes has IP address 192.168.254.9 and my server has 192.168.254.3
So on my Hermes file manager (Total commander) I try to reach
\\192.168.254.3\d$
But it can't reach this.
What do I need to do on Hermes and/or server PC ?
Doesn't seem to work when using Active Sync but needs a WiFi connection.
I set up a VPN connection and whenever I try to access a network share it automatically starts up and I can browse the network. I just use the inbuilt file browser.
Actually it kinda works without the VPN but acts a bit strange... will go down the file structure but not up??
Doesnt work for me using active sync over bluetooth with resco file explorer at all.
Active sync gives you an ip address but if i remember its in the wrong subnet completely.
Using wifi and it works perfectly.
mrmrmrmr said:
\\192.168.254.3\d$
Click to expand...
Click to collapse
Isn't this a default share windows sets up for its own?
(these default shares are not available for use, I think they are there either for internal use, or to prevent one from sharing the rootfolder)
Could you try sharing a different folder on the PC?
Make a d:\test, and share this folder; there should be a blue hand under the icon of the folder.
It can help to switch off "Simple file sharing" (in Windows Explorer, Tools > Folder Options > View, bottom of the list, uncheck simple file sharing).
Jörg
it does not matter. I tried both a normal share and hidden shares like d$
Now I captured the traffic between my pocket pc and the server.
if I try to connect by \\192.168.254.3\ my pocket pc tries to resolve name of 192.168.254.3 , but in fact it does not need it.
As it couldn't resolve the name it never tries to connect.
edit:
I figured out that the problem occurs because my wifi connection is not connected to "work" but "internet"
if I change it to "work" I can connect to my shares.
But then, what do I lose ?
mrmrmrmr said:
if I try to connect by \\192.168.254.3\ my pocket pc tries to resolve name of 192.168.254.3 , but in fact it does not need it.
As it couldn't resolve the name it never tries to connect.
edit:
I figured out that the problem occurs because my wifi connection is not connected to "work" but "internet"
if I change it to "work" I can connect to my shares.
But then, what do I lose ?
Click to expand...
Click to collapse
Don't know - maybe a few apps won't like it. But I've got wifi in internet mode and can still do shares... with a little help from "Pocket Hosts" and "NetUse". Not entirely sure where I got them from... try searching on them ("netuse.cab" on the net use one). Set the name/ip up in pocket hosts and use the name in NetUse. I suspect you could use the name in Resco Explorer or any other app that way.
Maybe I just don't understand the question, I always feel dumb after I speak. I installed An app called "pocket lan" and it just sorted it all out for me. Everything works, it was an older version too.
now there's one strange thing I've encountered...
I can access all the files and folders on my pc via wifi, yet only those that i actually put on sharing. Now when I try to reach the default shares (c$, d$ etc) while logged in as an admin it just doesn't let me to do that ... is there a way to log in as an admin ?
btw I'm using Resco File explorer for that thing - it is quite useful and has never let me down but the admin log in just doesn't work
any ideas ?
thank you all...
I hope those apps will help (I couldn't try yet)
btw, I found the following page with FAQ
http://www.pocketpcfaq.com/faqs/networkutils.htm
well, I installed "pocket hosts" and "netuse"
pocket hosts works (I tested with vxutil)
however, when I try to map a connection in "netuse" , netuse does not work.
it is still trying to connect with ost name and makes nbname query on the lan broadcast address.
my server responds with its other IP.
why does not "pocket hosts" work ?
no matter which software I try, I get a "error 53 connecting to resource" error.
When I search for this , I came to the following page:
http://support.microsoft.com/kb/242001
This problem seems to be related to my problem. However, I am not using Windows NT 4
My servers are Windows XP
So what is my "error 53" ?
any idea would help me... please...
Does anybody how i could access my Pocket PC from my PC over the network. I could do it vice versa through Resco but i can't do Pocket PC from PC nor Pocket PC to Pocket PC. Any ideas? I would like it to happen just how the PC does it, with no major add-ons. I don't want to have to deal with VNC, FTP, etc. So if you know, i'd really like to know the answer. Thanks
I was looking for the same thing and haven't been able to find anything.
(I know you said u didn't want to use FTP)
So far the only thing I have been able to find for this is an FTP solution.
http://forum.xda-developers.com/showthread.php?t=351882
I can access the local network from the phone, but apparently there is no SMB server available for Wm6
Why can't you just use the explorer function of ActiveSync?
Jadel said:
Why can't you just use the explorer function of ActiveSync?
Click to expand...
Click to collapse
There are multiple reasons for wanting to access your device from the network. I myself am using multiple machines and would like to drag and drop files from my phone without having to get a bluetooth dongle and install active sync on every one of those machines.
If anyone has setup a smb server for wm6 i'd love to know, also if anyone has any other recommendations for a good ftp server that mocha one doesn't run in the background properly and the bottom toolbar for it stays on my today screen.
Not exactly what you're after, but I've seen a web server for WinMo around somewhere...
Or maybe something along the lines of a VNC client?
Yea, there are reasons for the networking thing. I have several devices on the network and i would life to get a NAS device. I don't want to go to the trouble of setting up ftp/vnc. Mapping the device using Resco works GREAT. For some reason, my laptop can't find my Tilt when i search for devices on the network and i was thinking maybe it was because it didn't have the same workgroup name?
useful for sure
Assuming you're on the LAN with WiFi, what happens when you port-scan your device's IP?
Not sure what you mean by port-scan but when i go to file explorer on my laptop and type \\ip of tilt, it gives me some error. I'm really trying to look into this and most advice is using vnc and another program which i don't want.
kareem9nba said:
Not sure what you mean by port-scan but when i go to file explorer on my laptop and type \\ip of tilt, it gives me some error. I'm really trying to look into this and most advice is using vnc and another program which i don't want.
Click to expand...
Click to collapse
I don't think you're understanding when i said wm6 doesn't have a SMB server running.
Basically, it isn't running the microsoft networking services to access the file shares. You wont get it to work unless you get some sort of SMB daemon(server) for the phone, which to my knowledge doesn't exist.
look up SMB in wikipedia and u will understand what im talking about.
If using Resco to map shares, will you be able to play media (music, movies) over the wlan then, or will it not be fast enough?
I'm assuming that mediaplayer in wm6 won't have a problem playing from shares...or am I wrong?
/Pilot1
I kind of got this resolved. Not the way i really wanted it, but now i use Pocket Controller Enterprise and it does this. Really nice features, i could connect to anybody in the world, just need their host name.
Doesn't the desktop version of total commander do this? The only problem is the desktop version isn't free...
Hi everyone.
After searching through the forums, I couldn't get any satisfactory answer.
1) I have THD and Elfin - both WM devices. My question here is, how can I transfer files ( like Fotos, M$ office Documents, Music etc. ) using WiFi or to be precise WLAN? I do not wish to use Wireless internet to send files....I mean to say, without using any thrid wireless device, how can I enable file sharing between these two devices??
I have checked out Resco file explorer and Total Commander. None of them provide option of FTP over WLAN/WiFi.
2) Similarly, how can I transfer files between my WiFi enabled Laptop and THD/Elfin???
Is there any setting to be changed in existing devices, any 3rd party application?? or is it a call for Developers?
Big Thanks Ahead.
ash3012 said:
Hi everyone.
After searching through the forums, I couldn't get any satisfactory answer.
1) I have THD and Elfin - both WM devices. My question here is, how can I transfer files ( like Fotos, M$ office Documents, Music etc. ) using WiFi or to be precise WLAN? I do not wish to use Wireless internet to send files....I mean to say, without using any thrid wireless device, how can I enable file sharing between these two devices??
I have checked out Resco file explorer and Total Commander. None of them provide option of FTP over WLAN/WiFi.
2) Similarly, how can I transfer files between my WiFi enabled Laptop and THD/Elfin???
Is there any setting to be changed in existing devices, any 3rd party application?? or is it a call for Developers?
Big Thanks Ahead.
Click to expand...
Click to collapse
Here: http://pocketnow.com/index.php?a=portal_detail&t=news&id=6825
I preffer FTP protocol as there are many clients on Windows/Linux. On my blackstone I use Mocha FTP Server (freeware). Total Commander CE does support FTP (only as a client). Transfer rates are rather slow.
tnyynt said:
Here: http://pocketnow.com/index.php?a=portal_detail&t=news&id=6825
Click to expand...
Click to collapse
Thanks Guys....that was really quick. Just 1 question though - does this method solves my first problem - file sharing between two WM6/6.1 devices using WiFi ???
Thanks Again.
ash3012 said:
Thanks Guys....that was really quick. Just 1 question though - does this method solves my first problem - file sharing between two WM6/6.1 devices using WiFi ???
Thanks Again.
Click to expand...
Click to collapse
Well yeah, you can browse to a network share with e.g. Total Commander. So it should work once set up properly. Going to try this myself!!
Pardon me if I'm asking for too much.....can we have something like VoIP or to be precise, a radio communicator using such 'WiFi/WLAN between 2 WM devices'? It will be fun to communicate with friends in a 'trucker' style within WiFi range - 10-4 ?
tnyynt said:
Here: http://pocketnow.com/index.php?a=portal_detail&t=news&id=6825
Click to expand...
Click to collapse
Dude this one dosent seems to be working with WM 6 (for my Elfin) [at least the link says so ] Can you please confirm?
Thanks ahead
True... I cannot install it on my blackstone...
Yes you can....I have installed it on my Blackstone and me Elfin too (after upgrading Elfin to 6.1). And it works.
However, I am still not able to transfer files (using WLAN) between my Elfin and blackstone. Any ideas on that??
Thanks Ahead
Hi guys,
I am extreamly happy to say that i have been able to share files from one windows mobile to another windows mobile that too at the speed of up 450kbps.
i had been trying to do this for atleast 2.5 months with no luck(u may check the related topics, nobody had a idea, Even using xda, google, bing, yahoo, altavista found that nobody has done it before...) but yesterday i made it to work the way i wanted to.
All you need to do is create a adhoc connection(e.g P2P) and download FTP server (Yes your mobile will act as a FTP server) and FTP client.
For FTP server download mochasoft and for FTP Client download resco.
**Once you install resco 2008, go to menu-->options-->addins--> then download ftp plugging(and it will make resco to work as a ftp client)
Mobile A
Start--->settings-->connections-->add new ->name it p2p-->select the option "this is a device-to-device connection(adhoc)...once it is done, turn on wifi on Mobile B it will detect this connections, connect to it.....Now two mobiles are connected with each other via wifi(Without router).....Till this point you can find it in google.
Now to share files open mocha soft on Mobile A(It will show that it is "online" with a specific IP address(Note down this ip address), Anonymous login will be on but preferabaly create a user name (File--->settings--> Add[*give it a read/write permission]) and the password.
Then decide for yourself what exactly you wanna share with the other mobile, in this example i am going to share my SD CARD. Go to file -->settings--> other--> and in the "Login Folder:" put in "\\storage card"
Once that's done open up resco ftp on Mobile B. Go to My ftp locations-->New ftp session--Give a name to ftp session (like abcd), In the host type in the ip address address that you noted down earlier--> let the port 21-->Login:ut in the username that you created-->Password: put in the password
and Hey there you go!!!, you will have the Sd Card of Mobile A and you will be working on it as if it is in your own mobile..
....Cont...
On mobile A moccha will notify you that a user has logged on to your server. You can use all FTP commands on mochasoft.
I downloaded the 700Mb movie which was stored in my frnds mobile while we were having beer and it got downloaded at the speed of 450kbps(it started off with 350kbps and was fluctuating from 380 to 450kbps), Just before doing this i tried to copy a 10mb file using bluetooth and resco showed the speed 20kbps........
So next time when you go out to meet your frnds you can transfer all their stuff at the lightning speed via WIFI file sharing......
Good Luck!!
If i got to settings connetions i can only create a modem or VPN connection..nothing with ad hoc..what am i missing?
If I remember correctly, you set up an adhoc network as if you were to enter a custom network with a hidden ssid. You enable wifi and go to the screen where it shows the available networks. There you can add a new network and tick this is an adhoc connection.
Also, since adhoc connections have no dhcp server, it is best to work with fixed ip addresses.
Sent from my GT-I9100 using Tapatalk