Hi folks,
It's my first post here, and yes I have searched for an answer but couldn't find one (no doubt someone will now point me in the direction of an old thread! )
I've got a Vodafone 1605 (UK) Hermes type handset and have a Nokia CK7W car kit in my car.
The car kit works flawlessly with a nokia handset I have, but with the Hermes the outgoing call quality is (apparently) very poor. Apparently every 4 or 5 words are skipped and clipped. The inbound audio (the call I hear) is perfect.
Can someone suggest some possible fixes for this?
Thanks for your help....
Regards,
mistuk
See this thread
http://forum.xda-developers.com/showthread.php?p=1834544#post1834544
I'm reasonably confident this same change will work for your device as it appears to be a WM6 issue and not a device issue
Related
Hi
I just got my new BMW 330 (E90) with Navigation and Bluetooth. I can pair my MDAc but that's it.
When a call comes in, My BMW signals it. Sometimes I can get the call with the button in the steering wheel. Sometimes not. Sometimes I can but the connection breaks down in the middle of the call.
I see the reception of my MDAc in the display and when a call comes I also see the number of the caller.
I cannot make a call (dial out).
I read a lot but did not find a solution yet. Has anyone experience with BMW carkits or any advice what to change in order to get it going. I sort of refuse to have another handy...
BTW I have the latest T-Mobile Update (1.12) but I did not install everything from the extended ROM.
I have exactly the same problem with Audi bluetooth, with my Nokia 6230 works perfectly, with my S100 I have the same problems you have experienced. I have an old ROM 1.06, but I see that even with 1.12 the problems are not solved.
I tell what I tried: I've installed various BT stacks (Toshiba, Widcomm, Bluesoleil also with crack). Toshiba pairs but does not find any service, Widcomm does not run, Bluesoleil does not have the needed profiles.
I have installed the CAB from VCABT project (see the thread in this forum), I can answer from the car I can call using the car voice command but I can't use the S100 buttons.
Hope that somebody could help us.
dgv
fdigianv, have you tried the new A2DP Stereo BT Tool to see if it works better with your Audi.
I just upgraded my JAM to 1.12 and have yet to try it with my Audi A6 4.2 2005 MMI BT System.
I'm tired of waiting for Audi to fix anything. It seems like the only fixes or upgrades they offer come in the form of a new car release.
I like you can call out from the Audi, but those on thger other end of the call complain about sound quality.
I'm getting ready to make a move to the new Treo MS Mobile device, or a smartphone that works better with my Audi.
I spoke to BMW this morning and they claim has more to do with the version of Bluetooth installed on the phone than BMW's implementation of Bluetooth.
BMW supports Bluetooth verson 2 and up.
hiho everyone,
im quite in a little trouble with my alpine aka xda2i.
first of all i owned the old Himalaya Device and also the o2 carkit. no problems so far. now i "updated" to the xda2i and now its not possible to use the carkit as it was designed for, handsfree phoning... i hear the ones that calls me but they cannot hear me, i checked the micro but that is still ok. So maybe someone owns or knows where to get the connector pinout from an Alpine. then i can compare it with the Himalaya pinout. maybe they just changed 1 or 2 pins.
Second thing i want to know is if anyone knows how decode the Alpine ROMs cause i always get an password error on ER2003Edit..
hope someone can help me out
Puschel
Hi,
Does the wizard work with the nokia ck7w Bluetooth car kit?
Without any echo. :?:
On my old Blueangel device the echo was terrible, however on my new Vario only a couple of callers have reported a slight feedback.
I would be interested to hear of a fix.
I'm about to get a Nokia CK-7W installed in my car and I've just seen all the threads about the echo problem.
Most of the posts are pretty old and on the Blue Angel forum (and other forums). Can't find many threads about the wizard and Nokia CK-7W.
I'd really appreciate it if you could let me know if you've had problems with the wizard/CK-7W combo or whether it's been hassle free.
I've got a XDA minis with a 2.21.4.1 ROM.
Hope I haven't wasted my money on something that doesn't work very well.
Cheers,
Gavin
I have a Qtek 9100 and nokia ck-7w installed in my car and have no problems with it if i only use these with BT.
If i navigate with tomtom and my BT Adapt GPS is connected to my Qtek and the same time with the CK-7W and i receive a call then the sound is horrible.
Think it's some kind of bandwith problem.
Anyone know why the Cingular 8525 doesn't currently support the Nokia BH800 bluetooth headset, and when there may be a software update that will fix this?
Is this a problem with all versions of this phone, or just the Cingular one?
i also have the Nokia BH800 (cute headset) and it doesnt wrk properly with my jasjam. The mic is really low, sound is really low, doesnt support handsfree profile (only headset). It is quite strange because on my wife's nokia n73 it works like a charm with all the profiles and redirects all sound to it, even with tomtom nav 6 on her mobile.
Dont know how to help you as I am in the same boat. anyone else have the BH800?
I have the BH800- works absolutely fine with my TyTn using the latest firmware (on the Tytn, not the headset!).
Do we know that the Cingular 8525 will not work with the BH-800 by experience or by heresay??
I had the TyTn for a brief period of time, trialed the JasJam, and now have the 8525 -- thus far the 8525 has proved to have the most stable firmware, better radio, etc. so I can't imagine the Bluetooth being behind.
I just received my 8525 from premiere and it came with a small flyer that reads
The Nokia BH800 and Motorola H670 bluetooth headsets are not compatible with the Cingular 8525 and Cingular 8500 at this time. Compatibility with these headsets will be available via software download in the near future.
help!!
I see that im not the only one having problem with the Nokia BH800, im happly using the Black v3.0.1 rom on my hermes (softbank) but i cant seems to make the BH800 to work handsfree, did any one have a solution for that??
thanks
thetechnogeek said:
I have the BH800- works absolutely fine with my TyTn using the latest firmware (on the Tytn, not the headset!).
Click to expand...
Click to collapse
I have the Softbank edition which firmware is recommended to work with the Nokia BH800?
pls help
Hello Everyone,
I´m checking this Forum since a couple of days and must say, that it is quite interesting here
Maybee there is anybody who can help me with my problem.
I´m using a handsfree kit from Parrot in my car, the CK 3000 evolution and have since a couple of days a HTC Touch2 with ROM 1.33.111.2.
Paring the device on the CK 3000 is no problem. To hear someone is also no problem, but nobody can here me. I called my parrot dealer and he decided to update the software of the parrot. After he did, I still have the same problem.
Is there anybode here, who has maybee the same problem than me and maybee a solution for it?? The actual software of the parrot was checked with ROM 1.28.406.4, as mentioned at the parrot homepage.
Hope to receive replies, Im realy confused....
Just to let you know, with my old nokia the ck 3000 evo. is working fine. So, there is nothing damaged on the parrot