Hi,
Does the wizard work with the nokia ck7w Bluetooth car kit?
Without any echo. :?:
On my old Blueangel device the echo was terrible, however on my new Vario only a couple of callers have reported a slight feedback.
I would be interested to hear of a fix.
I'm about to get a Nokia CK-7W installed in my car and I've just seen all the threads about the echo problem.
Most of the posts are pretty old and on the Blue Angel forum (and other forums). Can't find many threads about the wizard and Nokia CK-7W.
I'd really appreciate it if you could let me know if you've had problems with the wizard/CK-7W combo or whether it's been hassle free.
I've got a XDA minis with a 2.21.4.1 ROM.
Hope I haven't wasted my money on something that doesn't work very well.
Cheers,
Gavin
I have a Qtek 9100 and nokia ck-7w installed in my car and have no problems with it if i only use these with BT.
If i navigate with tomtom and my BT Adapt GPS is connected to my Qtek and the same time with the CK-7W and i receive a call then the sound is horrible.
Think it's some kind of bandwith problem.
Related
I have purchased an O2 XDAII in Oz which is loaded with the 1.66 ROM. I have tried connecting two headsets to the phone over bluetooth with many problems.
Both seem to bond ok and work initially but later they fail - the XDAII doesn't respond to anything I press on the headset. Or the XDAII does respond (answer or end call) but no-one can hear me either through the headset or the phone.
Deleting and re-bonding seems to temporarily solve the matter. But if the XDAII goes to sleep and comes back on it stops working. Will also just stop working for no reason after a call or two is made or received.
I have tried installing the bluetooth tools which is cool because the XDAII can recognise some of those extra headset profile functions (like redial) but I still get the same problems as above.
Tried Plantronics M3000 and Motorola HS801
What can I do? Is it this Bluetooth stack problem from MS I have read about? Do I need a ROM upgrade? Do I need Widcomm something installed on the XDA II? I don't know how to do any of these myself. Any kind advice from a pro is appreciated in advance.
When you installed bluetooth tools did you delete any bonding and pairing of devices beforehand? it can make a difference if you havent done this.
Yes. I tried it twice thinking that maybe I might guess a way to make it work.
First I deleted the bonds after installing BT Tools and then rebonded.
Then I deleted the bonds before installing BT Tools and then rebonded.
I spoke to my Telstra dealer again today and they received a list from Brightpoint (a distributor) that matches various headsets against various PDA's available in Oz.
Not all BT headsets will work competently with all PDA's. The M3000 is marked as NOT compatible with the O2 XDA II available in OZ. So was the Motorola too.
I am now using a Hello II headset which so far is fantastic (very small and comfortable to wear) and is working with no modifications to the XDA. I will post back in a week with a fuller review. I'm going to re-install BT tools and see if that make a difference with the available functions.
Anyone else wanting to test these out in Perth, WA, (Australia) - they are available from Communications Plus.
Help
I can stop the sleep mode ... I have a MOTOROLA HS-801 Bluetooth Headset
Help
how can I stop the sleep mode ... I have a MOTOROLA HS-801 Bluetooth Headset
I had a problem with my Plantronics M3000 too so I called Plantronics themselves who said that the problem is with the phone, not the headset. It's a compatibility issue with the software.
Unlikely to be any fix, at least not in the near future.
Hi, I've planned to by the new XDAII i (in Belgium the Qtek 2020).
Does anybody can tell me if it is OK with a bluetooth car Kit? With the XDAII normal, I have a lot a Bleutooth problems that I hadn't with the Mini.
Thanks for your answers.
I've had no issues with the BT on XDA2i, other than my old headset wouldn't work with it - something i've now discovered was probably more to do with the headset than the phone.
All other aspects of BT work a dream.
Cheers
Ant
PS - XDA2i uses a Widcomm (now Broadcom) BT stack, not the MS one as used on the 2.
Still can't get my XDaIIi to send files via BT to my laptop! :evil: I tried it with my old XDA 2 and it works a treat........
Someone please help, i don't know how many times i've posted this topic
Anyone know why the Cingular 8525 doesn't currently support the Nokia BH800 bluetooth headset, and when there may be a software update that will fix this?
Is this a problem with all versions of this phone, or just the Cingular one?
i also have the Nokia BH800 (cute headset) and it doesnt wrk properly with my jasjam. The mic is really low, sound is really low, doesnt support handsfree profile (only headset). It is quite strange because on my wife's nokia n73 it works like a charm with all the profiles and redirects all sound to it, even with tomtom nav 6 on her mobile.
Dont know how to help you as I am in the same boat. anyone else have the BH800?
I have the BH800- works absolutely fine with my TyTn using the latest firmware (on the Tytn, not the headset!).
Do we know that the Cingular 8525 will not work with the BH-800 by experience or by heresay??
I had the TyTn for a brief period of time, trialed the JasJam, and now have the 8525 -- thus far the 8525 has proved to have the most stable firmware, better radio, etc. so I can't imagine the Bluetooth being behind.
I just received my 8525 from premiere and it came with a small flyer that reads
The Nokia BH800 and Motorola H670 bluetooth headsets are not compatible with the Cingular 8525 and Cingular 8500 at this time. Compatibility with these headsets will be available via software download in the near future.
help!!
I see that im not the only one having problem with the Nokia BH800, im happly using the Black v3.0.1 rom on my hermes (softbank) but i cant seems to make the BH800 to work handsfree, did any one have a solution for that??
thanks
thetechnogeek said:
I have the BH800- works absolutely fine with my TyTn using the latest firmware (on the Tytn, not the headset!).
Click to expand...
Click to collapse
I have the Softbank edition which firmware is recommended to work with the Nokia BH800?
pls help
Hi folks,
It's my first post here, and yes I have searched for an answer but couldn't find one (no doubt someone will now point me in the direction of an old thread! )
I've got a Vodafone 1605 (UK) Hermes type handset and have a Nokia CK7W car kit in my car.
The car kit works flawlessly with a nokia handset I have, but with the Hermes the outgoing call quality is (apparently) very poor. Apparently every 4 or 5 words are skipped and clipped. The inbound audio (the call I hear) is perfect.
Can someone suggest some possible fixes for this?
Thanks for your help....
Regards,
mistuk
See this thread
http://forum.xda-developers.com/showthread.php?p=1834544#post1834544
I'm reasonably confident this same change will work for your device as it appears to be a WM6 issue and not a device issue
Hi, im new to the forum, and its a great forum, its helped me alot with upgrading my O2 XDA2, and i am using the latest O2 Rom with it, which is fine, but i really need some help with my problem.
I recently Bought a TomTom Go 510, and its got Bluetooth Handsfree Builtin, and i thought it would be fine, and i get it home and connect my XDA2 to it, and it ses the only available features are Wireless Data Connection, not Handsfree, so i was well annoyed, because im using a different phone now just because its handsfree compatible.
I read on another web page that Pocket Bluetooth Tools sometimes fixes these problems by diverting incoming calls to your bluetooth device, but it still doesnt work, and its really bugging me.
So basically as theres so many clever developers and members on this forum, is there a piece of software that will fix it, or is there an update, or ANYTHING!!!! as im pretty desperate, ive read that these devices do have many bluetooth problems.
Any help is much appreciated
Thanks
Matthew
Please Help!!!!!!! LOL
Matthew