Hi I have an Unlocked Super CID X01HT, I have not been able to get the Blackberry software to connect. I have tried multiple ROMS all unsucessful.
Has anyone managed to get blackberry to work on the X01HT, if yes please advise which version ROM and which BB connect versions.
Problem
Pin always pending, and unable to make a connection either via UMTS or GPRS..
I have noticed that always in the Blackberry software info there is no transport layer version information
thanks for any help and ideas
Related
I have problem getting blackberry client to work on X01HT that I had bought last week.
Currently I owned a dopod 838 pro and X01HT. I had no problem installing and getting it to work on dopod 838 pro but when I install the client on X01HT, the blackberry service will show "not connected" then "stopped". No matter how many time I restart the service / reset/ flash the unit to other carrier's rom or different bootloader version. It just doesn't work.
The X01HT has Supercid and are able to flash to any rom without problem. Just could not get the BB client working.
I had tried using different version of BB client 2.1.2.20 and 2.1.2.16.
Wonder is there is anything different hardware wise btw 838pro and X01HT apart from the keypad layout.
Both 838pro and X01HT has dopod English 1.23.707.4 bootloader 1.04.
I had also test flashing the 838pro and install the same BB client and it works on every single rom that I flash to including HTC, Cingular, Imate..
Can someone please help me. Thanks.
What airtime provider were you using on your dopod? I know that bb connect only works if the phone / pda you are using it on has the stock rom installed for the airtime provider that you have your BB contract with.
For example, I have a Vodafone BB contract. If I put a Cingular or O2 ROM on my pda and try and re-install BB connnect I will get the same error as you. The carriers tend to block devices that dont have the correct ROM installed.
They might be true, but I have a Treo 750v (Vodapone ROM) on a Cingular network and BB Connect works fine.
Thank you for your kind input. I am using the same sim card swapping between the 2 units when I am testing. As mentioned, both 838pro and X01ht are using the same rom, both are supercid. The only difference is Hermes 100 / 200 which hardware specifications are the same.
Do you think if flashing the MDA Vario II rom on X01HT might make it to work?
i.e. At least get the PIN being register on the BES server, coz right now, after I install the BB client on X01HT, not only it didn't connected, when I look @ the PIN is said "Pending".
By the way, I am using T-mobile carrier in US.
X01HT Blackberry issues
Hi Mate, I have the same problem, ROM 1.23.707.4, Radio, 1.06.. did you ever find a solution?
Please forgive me if this has been covered. I have scoured the forums with no avail. I am trying to get Blackberry connect to work on Cingular. I am using a Cingular 8525 latest Cingular rom unlocked with the blackberry connect unlimited plan. During installation of the bbc client, the service drop down box is grayed out. Once installed, the service shows stopped, pin pending, ip address not connected. Any ideas? I have tried the latest HTC South African rom, all different versions of the bbc client software, and various apn settings (blackberry.net). It seems like the bbc client is locked to specific roms. Any help is greatly appreciated.
I had the same problem, never solved it, therefore I sold my Tytn.
I believe the version 100 (XDA Trion) doesn't work with BB.
I have bbconnect running on latest HTC ROM on Vod V1605, works very well.
dropped in first time, this is a corporate account connected to our BES server not a Provider BB Service. I do however have a BB account through Vodafone to access the corp BES.
mras said:
I had the same problem, never solved it, therefore I sold my Tytn.
I believe the version 100 (XDA Trion) doesn't work with BB.
Click to expand...
Click to collapse
Hi,
I have the same problem with two MDA VARIO II (T-Mobile (Germany) Version of Hermes device):
I called T-Mobile and got the information that HTC changed something on there device so that the Blackberry Software client will not work any longer.
This problem is very new and T-Mobile works with RIM and HTC to solve this problem.
The problem is that the Protocol version will not displayed on the last page of the Blackberry client and the client will not create a blackberry pin.
The very friendly T-mobile guy (Blackberry support line) explained my that there will be a new blackberry client or a rom / radio update to solve this problem.
For me I gave back both devices and will wait some time until the problem will be solved.
Perhaps someone here has another solution.
Erik
Hi folks,
I have just got myself an HTC TyTN and found this forum. I have been reading it for
a couple of days and managed to update the ROM on my phone to the latest HTC WWE version
on the wiki.
Loving the phone so far but I cannot get BlackBerry Connect to work.
I am running BlackBerry Connect 2.1.2.54 and using my UK O2 3G SIM which was previously
working great for BBConnect on my Nokia E61, so I know I am OK from the network side of things.
BBConnect installs OK, gives me a PIN OK, but when it tries to connect I get:
"Network Available" followed by
"Data Tunnel Available" followed by
"Not Connected"
I should mention that I am only using BlackBerry Internet Service, not the full-blown
BlackBerry Enterprise Service, so I have not installed the desktop part of the software,
only the client for the mobile.
I even tried to downgrade the ROM to the 1.35 version last night but the 1.35 updater
refused to let me.
Has *anyone* got BBConnect to work on the latest shipping ROM? Anyone have any details
about upcoming new versions of the BBConnect s/w?
Reg hacks?
I would be very grateful for any advice, will post back results.
Thanks,
Charlie.
PS: Is there any way to turn off the green flashing network status LED? It drives me crazy
PPS: If nothing will get BBConnect to work, anyone know of another solution to get my POP3
Yahoo mail pushed to my phone (I am UK based if that matters)?
I would appreciate some help with this same problem, but on Cingular USA.
New 8525, updated AT&T ROM, Cingular's Blackberry Personal data plan.
I was told by RIM they don't support Cingular and 8525, but I see many
users in this forum do have it working.
Have tried various version of BB Connect on my 8525, but they
all point to a blackberry.net IP address that ends in .189.
Some threads say it needs to be .192 for USA - is that my problem?
Thanks for your help !
I had Blackberry working fine on a T-Mobile Vario II, but last month that went back faulty (the dreaded lock-ups) and was replaced with a new unit.
I was unable to connect to Blackberry, getting the same response as Charlie. After much investigation TM were about to exchange the handset again when I received a call from TM saying that there was a known problem with a certain range of IMEI numbers on new handsets that were not able to connect with Blackberry. After checking we found that the IMEI of this new handset fell within the affected range.
I was told that it was a Blackberry problem, and that TM were expecting RIM to issue an update or patch to cure the problem. I decided then to remove the blackberry from my account and use other methods, so haven't pursued it.
So it seems there is a known problem with some HTC handsets, but as usual there's little being done about it!
bbc does not work with the new rom. to roll back, use the sdcard upgrade method in the wiki under rom updating for beginners.
this will take you back to 1.34..... sux.
wes
Can anyone else confirm that Blackberry Connect requires the original ROM?
As the previous poster said, that would sux.
Has anyone else been able to get the following to work?
1. Cingular US
2. Blackberry Connect Client (ver 2.1, not 4.0?) loaded onto 8525, running WM5
3. Get Client to generate a PIM
4. Use "Change Handheld" option on mycingular website to enter the new IMEI and PIN
5. Sucessfully access BIS
Please let me know which version of the 8525 ROM and BB Connect you used.
Thanks for your help!
Here's my setup:
1) Cingular 8525 SIM/CID unlocked (HardSPL 7)
2) Elf's 2.1 Crackberry ROM (WM6) - very nice stable build.
3) BBConnect 4.0.0.67 CAB
4) Cingular Blackberry Tethered Unlimited (both BIS and BES enabled)
Make sure you have a data connection working first.
BBConnect will issue you PIN after you click the Register button - you can see this in the BB Connect utility on your handheld.
You can then use this PIN and your phone IMEI on Cingular's BB site:
http://mycingular.blackberry.com/
Don't forget to download the Service books.
If your company has Outlook Web access for Exchange Server you can avoid BES.
BBConnect only allows 3 email boxes on a non-BB device.
Everything works fine except that the BB Service hogs the wireless connection so that I sometimes have problems with other services require internet connection.
Toss that Cingular ROM (even the latest 2.15 update) - it's worthless and a real headache - very unstable
I'm getting ready to install this, can you explain this comment:
If your company has Outlook Web access for Exchange Server you can avoid BES.
Has anybody gotten blackberry connect to work on a Herald?
I just tried it on mine and ended up hardreseting cause it would never boot completely after it.
Help
Are you saying that you cant get the gprs settings for the black berry plan?
I am running the employee blackberry plan on my wing and it works great.
If you are using the black berry internet plan you need to have your gprs connecting to wap.voicestream.com
where did you get the cab for your wing
Cab
I got the cab here:
http://thinkabdul.com/2007/05/30/do...obile-5060-smartphones-and-pocket-pc-devices/
The issue is I install it and it totally hangs my herald up to the poing that not even a reset works. I guess I'll try and see now with WM6, because I did that before upgrading.
Anybody know why it doesn't work?
Thanks
Is this only working on the factory rom or a cooked rom? Im going to test this tonight anyway but i like my Touch layout but wouldnt mind testing this. According the website it changes out the Windows icons and home page to match the needs of RIM.
I will post once i test.
After many hours of testing it doesnt work on the Herald at this time. The software is only good for the Dash. I have to finish my testing from work because it seems to only accept a BES server. I got the service onto the Dash. I will post later how it works but to be honest this process what not worth the trouble.
Maybe someone can work on a cab file to make this compatable with the Herald. Also Xavier, custs of T-Mobile cant use the BB service with the Wing. Employees are able to use it because you are not truely on the BES on windows you are using webmail to bypass the firewall. This software once it works on all Windows mobile phones will generate a PIN which is required for blackberry users to use its service.
Hope this info helps.
Hard reset your device, install the blackberry software, but install the software in the phone memory, and then synchronize etc. basicaly u need to have a clean device to have it working, i encountered the same problem i followed this procedure and it works on HTC P4350. a.k.a. Herald.
is it possible to get BlackBerry Messenger on a winmo device? if u have blackberry connect does that mean you also get blackberry messenger? or is blackberry connect only for emailing? (which new winmo devices from carriers seem to do just fine with push email). thx
Blackberry Connect not working on my Wizard
I'm trying to get Blackberry Connect running on my Wizard. I have a couple of issues that I haven't seen addressed anywhere in the forums.
First, my info:
Device = HTC Wizard G4, Cingular 8125.
OS = WM 6.1 TNT.19199 v2.
Carrier = AT&T w/ a PDA Enterprise data plan, which allows BBConnect
My company runs Blackberry Enterprise Server.
I was able to get Blackberry Connect 4.0 from here: http://www.sems.org/entry.asp?ENTRY_ID=225
Does anyone have a more recent version?
Do you know if I still need to use a hex editor to spoof my OS version? I haven't tried that yet.
Does anyone currently have BBConnect running successfully on an AT&T data plan using your 8125's IMEI number?
I installed BBConnect 4, it rebooted, I tried activating the BB, but it just said "Not Connected". Occasionally if I go to Utility and click "Register" the status screen will say "Service: Network Available" then "Data Tunnel Available" then back to "Not Connected".
Can I please hear from anyone running BBConnect on a Wizard? What is your configuration? What is your version of BBConnect? Where did you get it? What am I doing wrong?
Thanks in advance,
Dave
Tmobile Wing-Herald and BBC
This is more toward mrbrady12--
You posted:
Maybe someone can work on a cab file to make this compatable with the Herald. Also Xavier, custs of T-Mobile cant use the BB service with the Wing. Employees are able to use it because you are not truely on the BES on windows you are using webmail to bypass the firewall. This software once it works on all Windows mobile phones will generate a PIN which is required for blackberry users to use its service.
I am having this very issue. I have a new Wing, I am on Tmobile, I have a BES data plan for my sim. Lastly I have the BBC 4.0.0.97...Installed without issue to phone memory. But will never generate a pin. Even speaking to BES server over GPRS or 802.11 etc, it will not activate my corporate account. I took my card to Tmobile and tested on a true bb device.. Worked no issue.
So I would tend to agree with you regarding these folks not truely on BES service over celluar means. You might be catching internally via 802.11 but even that seems odd.
So, please if the "wing'ers" have this working share the info..
thanks all
do you know the muffinman..the muffinman..the poking ms muffin.
Any solution for use this service on polaris????
I'm not be able to retrive PIN:code.
Best Regards
Hi
BlackBerry Connect is hard coded via the BES Server you connect to. It will only allow you to run BBC on 'approved ROMs' (i.e. WM6.0 only and specific radio stacks only). If your device and stack aren't right you will connect momentarily and then you will be disconnected,
There is a german o2 ROM that supports BBC but I've not seen that in a while and you'll have to search for it.
Yours
Leon
this isnt true!
Radio Stack Version isnt checkt via BBC! They only check OS Version, AKU Value and Device Name. Some times the check your Provider too!
If BBC doesnt work ... mess around with the AKU Version. The easiest way to get it up and rounding ... use original Polaris Firmware.
I still don't know anyone who's been able to get it to work. This has been discussed in several different threads. Here's one.
http://forum.xda-developers.com/showthread.php?p=2091924#post2091924
I am using Exchange push mail now, which in my opinion is better anyway. The BC software is a resource hog and if Exchange is an option for you, I advise that route.
ok, here is another one. i have a orbit 2 (htc-polaris), bebe's ROM 0.67, vodafone germany blackberry SIM and version 4.0.0.97.
i dont get any PIN (Pending) and no stable connection.
but it seems there are workarounds by changing settings in registry, to let blackberry think you have another configuration. but i dont know any details.
anyone managed it to work?