Hi all,
I have been trying to get my Qtek 1010 upgraded to the WM 2003SE ROM.
I did the downgrade to 2002 as per the instructions on Lumpi-Stefan's site by SD flash.
When i run the 2003se .exe i get an error as the Qtek is supposed to go into flash mode (the screen where you get the progress bar as the new ROM loads). I can see the progress bar for a split second and then the device just reboots.
In Windows Device Manager there is an error (Code 43) on the HTC USB Device - i've researched the error code and all the descriptions of what cause it are really vague.
I also updated all my laptop drivers, incase it was a driver error, still the same problem, tried it on 2 other machines, and the problem persists.
For this reason i think its an issue with the Qtek 1010 itsself. I tried a 2002 ROM exe and i get the same error, but any SD flash works just fine!
My Bootloader version is 5.22, and the ROM currently on the 1010 is the one recommended by Lumpi-Stefan 3.17 i think.
Does anyone have a suggestion as to how i can fix / get around this?
Any help would be appreciated
Thanks
W
I got yestrday my new T-Mobile MDA vario, its looked & i wanted to unlock it. I tried using the LOKIWIZ02B and used the U option (unlocking),but all time i got the following message:
"copying H:\vario\lockiwiz02\Utils\itsutils.dll to WCE:\Windows\itsutils.dll
Could not update itsutils.dll to the current version,maybe it is inuse?
try restarting your device, or restart activesync
your phone is unlocked...."
But the phone was not unlocked, tried several times,but the same message is back and the phone is still locked.
My MDA vario information is as follows:
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.5.4.2
Plase give me a good advise or a solution to unlock it.
OS
Have you copied the .cab file to the phone first ?
if(yes){
Try this : make a backup of the WCE:\Windows\itsutils.dll file. Delete it
and make a new test. If you can't delete it because it is inuse try installing
a kill process tool, kill all processes and delete again
}
The phone was UNLOCKED, I copyed the CAB file to the phone but forgot to execute it, i did it again by the instructions and it works just as expected and the phone is now unlocked - thank You.
Ok, now the instructions...
1 - Unzip lokiwiz.zip to somewhere in your computer
2 - Copy EnableRapi.cab to your Wizard
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via ActiveSync with the computer
5 - Execute lokiwiz.bat (on your computer! My inbox is filled with this kind of error) and follow the instructions on your screen...
unlocking
what is suppost to happen ones you hit the U [for unlock] in the DOS box?
On my end nothing happens, the box just dissapears... mine is stil locked...
Good evening,
I’ve recently updated the rom of my HTC Prophet to the following rom: _818Pro_2151324_21513104_21721_DOP_Taiwan_CHT_Ship, which was taken from the FTP pf xda-developrs.com, and everything turned out ok, but the problem comes up when the pocket reboots and everything shows up written in Chinese. I’ve tried to update the rom to the following: JAMin_WWE_213923_2139123_022021_shi, but when th process reaches 95% the following error shows up: ERROR 326 : INVALID COMAND
Does anyone have the solution for this problem When I try again with the Chinese rom the pocket pc accepts it.
Thanks.
had the same problem, use the dopod test rom WWE, it will work and turn your device to english
I tried to flash my UK T-mobile vario to wm6, but the GUU reported error 300.
So I extracted the nb file into several nb files, and then flashed my device by the os file with aWizard. After the completion, I hard reset it, and it died on the ipl/spl/gsm/rom screen.
I tried to dump the OS to a sd card by romupdate, but it responded as follows:
r2sd all
***** user area size = 0x3BE00000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
So what can I do now?
First go into bootloader mode and flash the original rom back.
You'll probably have a G4 phone, because of the error 300. Never flash IPL/SPL on the devices (WM6 doesn't contain it), because it will brick you're device.
Look at the G4 section on howto tell if you got a G4 and how to get past the error 300. For WM6 you're device has to be CID-unlocked.
Thank you for reply.
I have resolved it, just because the RUU on my harddrive was damaged, so I redownload it and then fixed my device.
Hi to all in this forum.
I have one T-Mobile MDA Compact II PM200. In this forum i hound that his name is Charmer. I try to unlock it with Lokiwiz03a. Program give me a code but device says that code is wrong. I try with other software to unlock it and after that mobile work with SIM card but no signal
I reflash mobiele with WM6 founded her in the forum, not it have English (before have German) but again no signal. I try now to unlock it with Lokiwiz02a and choose CID unlock. Again no signal.
When device in Automatic search mode no found network. If in Manual mode found but unable to register in network. When i put mobile to my computer speakers no outgoing signal from mobile that's not normal.
What is the problem ?
Can onyone help me with information ot needed software ?
In moment mobile information is:
ROM version: 10.2.0.8 WWE
ROM date: 2/03/07
Radio version: 01.12.20
Protocol version: 4.0.13.23
Identity:
Model No.: WIZA200
Platform: PocketPC
IMEI: 35703700051525500
Hardware:
CPU: OMAP850
Speed: 195 MHz
...
I try to found information about this problem here in forum but w/o result.
10x in advance
Did you try to flash a new radio? 2.69 or 2.19?
No.
I found this files:
BREEIMG.zip
breeze.zip
inside breeze.zip are:
SSPL.exe
spl
breezessplv1.nb
inside BREEIMG.zip is:
BREEIMG.nbh
is this needed files for radio flashing ?
if not then what files I need to try with other radio version ?
I download Radio from ftp on this form for Prophet. And try with Prophet_G4_RadioRom_v2.47.11 but now mobile not start. Go to splash screen and after few seconds restart.
I try to put it in bootloader mode but ActiveSync can't make connection and for that flash software can't wreit new radio or flash into mobile.
I ry with:
1. dowenload this t-mobile official rom (http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe)
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
but ActiveSync can't make conection.
?
If you are in bootloader Active Sync wont make a connection. Just plug in the usb cable into your phone while in bootloader and run RUU.
Cheers,
vlodeck.
I try with this 2:
1. T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
2. Prophet_G4_RadioRom_v2.69.21
T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
===================================
inside are this files:
EnterBootloader.exe
nk.nbf
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Prophet_G4_RadioRom_v2.69.21
========================
inside are this files:
EnterBootLoader.exe
nk.nbf
ROMUpdateUtility_G4.exe
RUUGetInfo.exe
RUUResource.dll
phone not start normaly. just start and after 5sec restart. i put it in Bootloader mode (press Camera, Power_buton and Reset. then release Reset and after few sec. mobile goto in Bootloader mode). when conect USB cable ActiveSync not find mobile and this file not make upadte/conection: ROMUpdateUtility.exe and ROMUpdateUtility_G4.exe
if I try to start RUUGetInfo.exe windows says that this is not valid Win32 application.
then what RUU to start ?
how to flash other Radio into this mobile or to reflash it again to be alive ?
anyone will help me for my problem ?
in moment when i start my pocetpc it displays:
IPL 1.12
SPL 1.12.0000
OS 10.2.0.8
the row GSM .... missing.
in moment i can't make connection with ActiveSync. then how to flash again mobile ?
now i try to flash it with RUU:
http://www.tm-phonedownloads.com/download_manager_mda_com2.html
http://www.t-mobile.de/downloads/?r...ku3.3_38222_382117_026921_tmo_de_ger_ship.zip
but it gives a error
i try with this:
http://www.my-audio.net/xda/Univers...s/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
but when software start flashing says that this Utility is not for my device and to find right
?????
I'm guessing that this universal radio upgrade is for universal
Download this:
http://www.mobione.pl/pliki/ruu_252_eng.zip
Extract it, copy the .nbf of the rom you want to upgrade your device with to the extracted RUU folder. Once copied - run RUU.
P.S. The problem with your device is that you have upgraded wm6 on 1.xx bootloader. Thats why the system doesnt start. If the method I described above doesnt work. Post me.
Cheers,
vlodeck.
now i can bootloader mode,
i did it but got this error while i upgrade my rom to newest rom 3.3...
i got this "invalid command 326": please check your NBF data, this NBF data cannot be used for your PDA Phone.
hi again to all
after long time i try to play agian with this brick-PM200 that haven't signal.
last time (before more 2 years) i write ROM and after that PM200 not start, only in Bootloader mode (3 color lines).
today i revive it when flash this:
HTC_charmer_upgradeut_noid.rar
(
EnterBootloader.exe
nk.nbf
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
)
PM200 start, in begin fave full signal. after 30-40 seconds signal gone (but not test in/out call). i try to restart mobile, try hardreset, try manual search on operator - all no result.
on start i put near radio but power amplifier not work. i think that this is harware problem.
but not 100% sure.
is possible this problem to be from wrong radio settings ?
i try to write different radios for Prophet but every time get message "Invalid tool" and radio flashers stop.
i try with universal radio thata Vlodeck says but again this message.
what to do ?
before two days i repair one HTC Touch Elf100 and read that can sniff USB comunication to check Vendor ID and other ID.
but in my PM200 this not work. on Elf100 work easy like is writed here in forum.
when start wyty (or what's name is) make connections with mobile but after write:
ruurun 0
says that need password. if try with password for Elf100 not accept it.
what is the password for Charmer (PM200) ?
or if there is other way to get Vendor ID and other ID how ?
I can help you maybe. You need to downgrade to Aku 2.2 using the original utulity. Then the Radio will be downgraded too. But nobody knows the exact way on how to do that. (Maybe Vlodeck knows that?) I'll try to get it this week and tell you then.
As for the password try CHARMER. I have never been able to test it with MTTY cause I don't get in the right mode but I think the olny possibility is CHARMER. Just try it with whatever tool you want.
Hope that was helpfull
10x for answer.
next day will test password and post result.
how to downgread to aku2.2 ?
if you find solution please post it.
today i try but w/o success:
Cmd>password charmer
Cmd>ruurun 0
Cmd>getdevinfo
Invalid command : getdevinfo
For a help screen, use command ? or h
Cmd>
i try and with passwrod CHARMER. result is same.
what are commands for MTTY that supported Charmer ?
OK you have the same problem I have. You have Cmd> in the window. To get the comands and the password working you need USB> instead of Cmd>. That is the same problem I have and I don't know how to fix it.
in moment i use MTTY 1.42
before 3-4 days i repayr one HTC Touch Elf100. and this MTTY work find. no problem that write CMD not USB.
terminal show CMD> i write commands and mobile answer w/o problem.
but in my Charmer not answer.
possible reason is access password. but not sure.
There are simple comands. And for them you don't need SuperCID. I tried them and they haven't worked too. So I think there is something else with it. Maybe the Bootloader locks all comands and you need a password for that too. But I don't know about that.
@ChrBeck
you try to make SuperCID SD card to have full access to mobile. and after that to try flash it with RUU ?
next morning will try this.
p.s. now find this:
http://www.tm-phonedownloads.com/
http://t-mobile.iris-global.com
Well, we can't SuperCID and Security unlock a Charmer with a bootloader over 1.x at the moment. This is surely impossible. That won't work using a SD Card too. So I think you will not have any luck.