Ok ive tryed it all nothing works ive unchecked the "usb to pc" in the settings.
Ive reinstalled WMDC 3 times and even plunged my phone in to a xp computer with activesync still nothing. Even when i put my phone in to bootloader mode still will work pls help
jdyson209 said:
Ok ive tryed it all nothing works ive unchecked the "usb to pc" in the settings.
Ive reinstalled WMDC 3 times and even plunged my phone in to a xp computer with activesync still nothing. Even when i put my phone in to bootloader mode still will work pls help
Click to expand...
Click to collapse
Ok, I tryed all removed and re-install Activesync and nothing worked just like you. solution I deleted the S$#@%T out of my laptop now Activesync is working 100%
Disable ALL FIREWALLS!
jdyson209 said:
Ok ive tryed it all nothing works ive unchecked the "usb to pc" in the settings.
Ive reinstalled WMDC 3 times and even plunged my phone in to a xp computer with activesync still nothing. Even when i put my phone in to bootloader mode still will work pls help
Click to expand...
Click to collapse
I do not think WMDC works with XP.............but looks like you have your activesync working again....that's good.
I am putting my problem here as i am a new member.
My PC Suite for X10 was working fine but last week i received firm ware update R2BA024 over the air. After that update, I tried to install PC suite on a new (as i bought a new PC) computer. however, after installation, PC suite gives message for software update, after following all the steps, at the stage where PC suite ask to remove the phone battery for 5 seconds and than connect the USB cable with phone while holding the BACK button, once i follow this step, my computer gets stuck and than i have to re-boot it. I tried installation on a 3rd computer as well to check but problem remains the same. However, if connect to my previous (1st) computer it does not show any message of software update and works well.
Can any body let me know what could be the problem and how i can over come. As presently it seems that I can no longer use PC suite on new computer.
Thanks
Hi.
PC Suite doesn't work with the X10, it's PC Companion you need to install.
lol
XperiaX10iUser said:
Hi.
PC Suite doesn't work with the X10, it's PC Companion you need to install.
Click to expand...
Click to collapse
I agree wahhhh Can't stop laughing maybe his new with the android phone lol.... any way your x10 every computer is fine and its work flawlessly..ones u connected into your computer it will prompt u first the sdcard and u will see some option and u can install the pc companion coz its already inside the sdcard ohh
Sorry Guys for my mistake!! Its actually PC companion (wrongly mentioned PC Suite). As mentioned in the my question, I was already using it on a different computer and worked fine. Also i installed update service.
But now on new PCs both are not working. I am sure that there is no problem with the PCs as i checked PC companion on 2 different PCs and problem remains the same. Problem started after upgrade from RF 14 to R2BA024
Thanks for your support again
hi
zurkal said:
Sorry Guys for my mistake!! Its actually PC companion (wrongly mentioned PC Suite). As mentioned in the my question, I was already using it on a different computer and worked fine. Also i installed update service.
But now on new PCs both are not working. I am sure that there is no problem with the PCs as i checked PC companion on 2 different PCs and problem remains the same. Problem started after upgrade from RF 14 to R2BA024
Thanks for your support again
Click to expand...
Click to collapse
what os version you have on ur new pc? is it windows 7, vista, xp? my nephew have windows7 laptop wen i plug in the usb cable onto my x10 it detects the new software and it installed automatically,,,, now you ca install pc companion and update service right from ur sdcard
on my laptop i have windows xp and its run flawlessly with no prob.....
I am using Windows XP professional. I have downloaded the latest version of PC companion version 2.00.142 and SEUS version 2.10.7.15. Both works well with my old PC as they were installed before firmware upgrade OTA to R2BA024. But incase i install these on a new PC and connect phone, PC gets stuck during the process as mentioned above.
ahhhhh!!!!! now i know what's the problem you need to factory reset your phone to refresh all the setting and update....but before that you need to back up your data..... go to settings-sd card & phone storage -factory data reset.... it won't deleted mp3,images,
wile the others to be deleted is contact,files, application downloaded, setting from the network but its ok it will prompt you automatically after you reset the phone....
good luck..... cross finger......
Thanks for the support. Just one more question - After Factory reset would i be able to receive again the latest firmware - R2BA024
Ahhhhhhh!! tried factory reset, re-installation of PC companion but problem remains the same. Computer gets stuck
zurkal said:
Ahhhhhhh!! tried factory reset, re-installation of PC companion but problem remains the same. Computer gets stuck
Click to expand...
Click to collapse
what is the error message you get from pcs that does not work???
I had the same "problem"... Try this - Uninstall PC Companion > download the latest version (http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pccompanion/xperiax10?cc=gb&lc=en) > Install new version
I donot get any error messags. After pc companio installatjon it says softwafe update is available. But at at the stage where it ask to remove phone batter for 5sec and than connect phone while holding the back button when i do so computer gets hang. I will try to provide screen shots later as well to give more clear understanding
Well as nothing was going well so i decided to go back to my old computer for a try. I uninstalled Companion and SEUS and than reinstalled PC companion on the my old PC. After reinstall Campanion showed the same message of a software udate available here as well. So I started the upgrade process again and it started downloading, installation was also started with out any problem. However, at the installation finalisation stage (very final stage) i would get a an error message that installation was not succesful and to try again. Tried several times and during this try again process I all most brick my phone as well as at one stage my phone started showing yellow Exclaimation mark (I was almost dead) But than lucky the update process completed and phone rebooted succesfully.
So i went back to new my compture to check it their AND every thing was fine there as well. PC campanion is working perfectly fine on it. I also checked it an a 3rd PC also for the sake of checking and there as well every companion worked fine.
After software upgrade, my phone now also has the option of Sync with Sony web as well as before it only showed the option of sync with gmail.
What exactly was the problem!! am unable to sort it out so far. And I wonder what will happen if there is another upgrade available????
I installed the drivers yesterday by just plugging my phone in via usb and my pc was recognising my phone as the arc. Today I was having trouble with wireless sync so I uninstalled the drivers, rebooted etc but now it wont install them, just keeps failing.
Anyone know how to solve this?
Try rebooting the phone while keeping it connected to the PC via USB. The same thing happened to me today, reboot miraculously cured it. You might need to remove the Arc from your Device Manager first.
When i plug my Samsung Focus into my laptop to sync with Zune. I get an error saying the device connected is not recognized and has malfunctioned. error code 43. i have tried everything to repair it. i used the USB that came with the phone, i tried others, i did a hard reset. i uninstalled and reinstalled zune. My other phone works to update with zune, just not my samsung. Any advice you can offer on how to repair the software issue would be great. my phone is ready for the update but i can not do it. It will not synch wirelessly.. says please connect usb.. HELP.. thanks so much...
try to reinstall zune software. If that doesnt work and you did a hard reset, you are probably gonna have to go back to where you got it from.
Hey,
I have a Note 4 Developer Edition and have enabled usb debugging. However, when I connect via USB to my Mac, it does not connect. Usually, you will see a notification in the tray that prompts for the desired usb mode. Yet, that option never appears. I tried using both AFT and Kies to connect, but had no success. In fact, when I connect to kies, it starts to connect, but then flashes an error prompt:
"No response from the device. Reboot and reconnect the device. Please contact the customer service centre if the problem persists"
I was only able to read that because I very quickly screenshot the message as it flashed. While Kies gives that message, AFT shows no signs of ever recognizing the device.
Also worth noting is that, on the phone, it asked me something about RSA authentication the first time I tried connecting to this Mac - I remember tapping "yes".
Edit: I have since installed Android Studio on this mac and can successfully connect through the ADB. However, I am still unable to connect to AFT or Kies/Smart Switch
I have google searched for hours and hours to no avail. Please help.
Thanks
when connecting through android studio, in the console I see:
"D/TimaKeyStoreProvider: Cannot add TimaSignature Service, License check Failed"
and
"D/dalvikvm: Debugger has detached; object registry had 1 entries"
I'm not sure if these are related to the issue I'm seeing, but I thought it worth mentioning. I will try to switch from dalvik to ART to see if anything changes.
switching to ART runtime had no affect.
I'm out of ideas. Any troubleshooting suggestions are welcome. Thanks.