something weird just happened today the phone has no sound what so ever screen taps, playing music on speaker, incomming and outgoing call no sound no mic on both ends, the only sound I get is the ringtone when someone calls any clue?? I tried a hard reset twice but nothing only way now for me to make or receive calls is to use the headset then there's sound and mic.
after some searching the post I guess I have the common rear speaker problem I try opening it and touching the wire but no go I guess I have to send it back. Now heres the problem I'm in canada and I bought this in hong kong I have the recipe and everything and I pretty sure this has the standard manuafactory warranty but I have jester rom on this do I need to flash it back to the o2 because I'm sure I can't I have the G4 model and can't downgrade any suggestions?
After some tinkering I'm thinking that its the headphone jack thats causing it I think there might be some sort of sensor in there to let the phone know a headset is in and now the phone thinks that theres a headset even though theres none because when I recieve a call the ringtone goes off. I would open it but there 4 screws holding the plate together and on one screw theres a sticker that reads void if remove and I'm scared that if I'm wrong O2 won't fix it if and when they anwser my email.
I have the same problem with my Dopod 818 Pro bought in Malaysia. So I ended sending it to pocketctech.com for repair btw I am in Canada too.
how much did it cost no including shipping and is pocketpctech canadian or american??
fixed it kind of well heres my story after opening it up and having no idea what to do I put it back together got a little pissed and jammed a screwdriver in there now my my headset only has sound from one side, so I said F it and decided I was going to take it to a cell shop when I have time to get it fix since o2 asia is no help, when I was at work I was thinking what could be wrong I know that my speaker works and I'm sure there's some kind of switch in the headset hole so when I got home I decided to find a small pin and bend the front of it a little so it looks like a very small hook. after that I was jaming it in the hole (LOL) anyways I was right theres a small switch in there if you are look at in my view the screen is facing down the switch on the left behind a metal place, to my supprise my speakers came on yay!!!. But this is not the right way to activate the switch since if the speakers on and you plug in the headset the headset don't work lol you have to use the pin again to switch it back but then the speakers stops working. I did this a few times to confirm the switch is there but don't blame me if you try this and screw up your headset plug hole.
Related
I've been using Dopod 818 pro since the end of December 2005. A week ago, a problem suddenly came up. The speaker of this PPC does not work anymore.
I tried to play music using windows media player, or real player -> Does not work
I tried to use the speaker phone -> Does not work
I can't even hear anything when I make a call or receiving a call
It works when I plug in the headset. everything works perfectly.
It plays the ringtone when someone call me. (Very soft sound)
Is this a hardware problem? or is there anyway that I can do to fix it.
I bought the phone overseas (I'm located in Australia now). It takes a lot of effort to send it overseas for warranty.
Thank you
Do a soft-reset. If that doesn't help, do a hard-reset. If that doesn't work , do a ROM re-install. If it still doesn't help, then you have a faulty unit.
I've done soft reset
I haven't done hard reset
->haven't had any backup program.
Is there any free solution for backup software?
Thanks
i ve solution
well for this solution u must disassemble the phone. look at the handsfree jack and apply a jumper to the two front points of the connector. it will solve ur problem
aj0s said:
I've been using Dopod 818 pro since the end of December 2005. A week ago, a problem suddenly came up. The speaker of this PPC does not work anymore.
I tried to play music using windows media player, or real player -> Does not work
I tried to use the speaker phone -> Does not work
I can't even hear anything when I make a call or receiving a call
It works when I plug in the headset. everything works perfectly.
It plays the ringtone when someone call me. (Very soft sound)
Is this a hardware problem? or is there anyway that I can do to fix it.
I bought the phone overseas (I'm located in Australia now). It takes a lot of effort to send it overseas for warranty.
Thank you
Click to expand...
Click to collapse
I've had this problem, what I did was play music using headphone and suddenly unplug the jack. The Speaker works again like charm.
Cheers!
dopod 818 pro speaker issues
I have run into the same issue with my 818 pro and my Himalaya...The fix is always uninstalling one or more applications that may be causing the problem. I assure you it's very unlikely that it is a hardware issue...Uninstall all applications and you should get the sound back..
I have the same problem with my 818 pro. I have already done the hard reset-no change, tried blowing air in and out through the headphone jack, silicone spray and playing with the plug. It appears to be a hardware issue with the sensor mechanism inside so it always thinks it has a headset connected--poor design.
Did anyone else figure out a solution for this (other than returning for repair?) This happened to me this weekend. Suddenly happened after I was using the headphone for an hour while I was rollerblading. Now I can't answer any calls without either the bluetooth or standard headphone. I can hear the ring go off, but just can't use it as a regular handset. I'm sure everyone agrees that this is a hardware issue with a poorly built headphone jack. But while I'm waiting for the retailer to restock the dopod 818 and send me a replacement, does anyone know of a hack that would allow the phone to activate the headphone AND the phone speaker simutaneously? The reasoning is I think the phone currently thinks there is a headset constantly being plugged in, so it deactivates the loud speaker as well as the phone speaker. But if there is a hack that lets WM5 to use the handset speaker and the headphone jack simutaneously, then at least I can answer phone calls without having to use the headset. Of course, this won't be a permanent solution, but it may bridge me through these tough times with the dopod.
I have to say, I still love this phone, but my patience is wearing a bit thin. First, it's the disappearing SD card (which I'm not even sure if it's solved yet), then I was having some problems with sending MMS messages, now this. :x
I had the speaker problem with my Jam. It is apparently a common problem with PPC phones, the mechanical switch in the headphone jack gets stuck. I was able to get mine to work again by plugging in the headphone jack a few times. If that doesn't solve the problem...well you know the drill
There is nothing to do but exchange it--I was never able to find a work around either. Sorry.
I had problem the speaker on my HTC Charmer. I send it for repair and they replaced the speaker, with in like a week+.
However, now there are some other problems. It seems that when I try to use the speaker (play songs, phone, games, etc), the battery drain like mad and the unit gets very hot. The unit drain so much energy that the battery will die off even if I had the unit on AC power. Going to send it back to repair AGAIN!
gunggu said:
I've had this problem, what I did was play music using headphone and suddenly unplug the jack. The Speaker works again like charm.
Cheers!
Click to expand...
Click to collapse
I had the exact same problem and suddenly unpluging the jack works for me..
this "sudden unplugging" thing won't work with Prophet, the Prophet's buzzer(speaker) problem is very common, the same thing happened to me, cost me 12$ in iran to change that part
818pro speaker problem Hardware related
I had the same problem.
Speaker unit in phone burns out very quickly.
If you have warranty - your lucky.
In my case since I bought in Singapore and Use in Israel, I had to fork out 50USD to get a new speaker unit.
Tal
What you do is open the Comm Manager, tap the "phone" icon to set to flight mode. Then, turn on again.... that should do the trick
I don't know what planet most of you guys are on.
The Prophet has a common problem with the rear speaker - it's a hardware issue as X_Farhad has pointed out.
There's no need to hard reset, and what's the crap about flight mode?
Yes, some can have a problem with the headphone socket and the solution for that is in this thread.
Mostly it's the speaker itself. The solution is here: http://forum.xda-developers.com/showthread.php?t=281331
I've found a bit of sponge works better than paper - to see what I'm on about - go to the thread I've posted here.
Speaker issues and phone hangs
I also have similar issues with my Xda Neo. The speakers stops responding when i get incoming call. I mean the phone dosent ring. Then if i try any music player or ringtons, there is no sound. I have to soft reset. Sometime when i get incoming call, it dosent ring and it also hangs the phone. Then i have to hard reset. I had to use that sponge over the speaker and then the speaker works. But sometime it still hangs. Looks like either HTC or Windows Mobile has major issues. I dont know how long this sponge thing will work. Are there any solutions..
sameer
Tal,
I have dopod 818 pro and having the same phenomenon like others, now I'm abroad and can not check the thing with the headset.
Can you tell me please where can I get service in Israel (I bought mine in Thai).
Many thanks
Dotan
sound problem
Dear all and administrator
can you give me solution about my dopod sound problem?
1. I just can used ring tones for receiving new messaging from the my dopod system ( I can't not used ring tones from my gallery/downloaded sound/ring tones application )
2. When new message coming and phone call coming, the sound is very small (can your's give me information how to setting that so the volume can be more loud).
Thank you very much for your's attention, I'm very apprenticed if the solution can being send to my private e-mail address at [email protected]
anyone have solutions on this issue? thanks
ok this is a bit funny
handsfree earphone works,,,but the ear phone in the mda compact doesnt work
the normal sound speaker works,,just not the phone speaker
ok it works stuttery when i press up on the slide switch and i can hear the caller kinda stuttering
wierd software rpoblem i think
its not hardware problem as the slider makes it work,,if i constantly press up o the slider but then i hear the caller and the beep beep it makes to tell you its at full volume
My qtek s110 is doing the same thing after i dropped it, could i have knocked the contacts?
Can anyone explain why the volume slider would make it work.
Cheers
I think its a hardware prob only! Cz if the volume slider is getting the sound volume increased, you guys still couldnt get the full volume right? If so, its probably the speaker or its contacts getting the problem!
www.CartyStudios.com
solution for no noise problems
Hey guys and girls, I also had problems with “no noise from the earpiece only.. and were puzzled with the problem for few days….until found the reason behind it.
As I am a lover with high-tech devices, I really wanted to fix this problem by myself (not prepared to pay few hundred dollars for repair from technicians).
I also want to contribute something on this site, as I have read great information’s from this site.
Here it goes.
I had this "no noise issue" problem with one of my device (have 2 sets of o2 mini) had no sound on the earpiece only (meaning speakerphone, hands free mic all works perfectly).
Now, to make everything short, I have done a great research with few personal technicians and even official technician from O2 Company and found the answers for this problem.
The fault actually lies with what is called the "Audio Daughter Board". It is a removable internal PCB that the speaker contacts to receive its audio signal from the phone. The board has a connector that is soldered to it which sits on another connector that is soldered to the main board. Both of these connectors can become removed from their respective solder connections usually as a result of a fall or physical impact. Usually all that is needed is a touch up of the solder points.
This Audio “daughter board” is connected with black connector at right hand side only, and the rest of the board with double sticky tape.
Most likely, the black connector has been disconnected to the “daughter board during drop of the device, as you need to solder the parts back (black connector has 14 legs, 7 on the left and 7 on the right) to get your earpiece sound back to normal.
I have done it, so can you (very small legs, so has to have delicate hands).
Now, mine works like a charm…. So happy…
After all, it was neither the programs, nor the legs of the earpiece, but the actual connection between the boards itself.
Hope my information helped.
Cheers
PS: I have updated my device to 2003 second edition with radio 1.13.00 but have no idea where to get pda programs. Can anyone let me know where to find such good programs?
It works!!!! Thanks
Your a genius
Hi im so happy it worked. I bought even a new speaker but this was noit the problem.
The internal speaker is now working but i found another problem with the ring tone liudness which i have to clarify now. So the serach will start again for me.
Again thanks.
Hi need help from all of u.
Hi my o2 mini have this problem, i can't hear anthing from the caller but they can hear me.may i know how to get the problem done, hope all of u can help me thank You.
bluehanul76
You really rock m8.
I was very doubfull that this would work. I have tried everything else people has suggested to no avail.
BUT I thought I have nothing to lose in trying you suggestion.
And it worked. It really worked.
Thank you very much.
Sorry for what am i going to say, maybe i did not get things clear...
How on earth can you solder the black connector both on the main motherboard and on the audio daughter board? Am just asking cause my magician had a broken earpiece and when i open it to replace it the phone died. Strange thing is that when i remove the storage card it comes alive again but no sound from the earpiece. So this solution is great although i had to make the question just to know how to handle things.
Thanks guys
Got it guys, the one connector on the main board was detached completeley and got stuck into the other. That is why i thought that it was one piece.
Man , i said to myself how come these people got it soldered , they must all have personal nano robots lol
Update:
Burned the small black connector tha sits on the main rboard
Any chance for someone to know what sort of PCB is this so i can purchase one?
Firts of anything sorry for my inglish but i´m portuguese and my inglish is a litle rusty.
I known there are a lot of people whith this problem and i had to. I tried a lot of things and i find a solution. The major problem of the this is that the black conector don´t conect very well whith audio bord, and i do a trick, so i thake a litle peace of cotton roll in powertape (like one that is on back of keybord) and a put it as way that when e close it make pressure in de audio border conector(in left of earpiece) agaist de front cover.
I hope I can help
enduromen
i have the same problem, and i will try to do as instructed. if it succeed everyone have a drink on me
Hello.
I have the same problem ina Qtek s100 but , like I dont know very well how to do look for the hardware piece that you send me the picture file because i cannot download it from XDA, it dont appear. If you send me to [email protected] I will be gratefull.
Thank you
This is the weirdest thing/worse thing that can happen to my wing so far....
I was on the phone talking like normal, everything ran fine, everything was perfect. The next phone call I get, I can't hear the other person...I'm yelling HELLO!?!? HELLO?!!...I thought it was their crappy flip phone. However, it was MY PHONE.
So everytime, I had to make a phone call or receive a phone call I have to put the person on speaker phone to hear them.
I did a hard reset and ERASED everything and that still didn't fix my problem.
So, I took a deep breath in and took apart the wing to check if there was a loose connection where the Ear Phone Speaker was connected to the board. Everything looked fine and un-plugged the speaker and used the Dust-Away Can on it and put it back in...and it still didnt work. I took disconnected the speaker again and just threw it against the table cause I got so mad. Connected it again. and Viola! It works again! I was extremely happy until....
Today during school it happened again, I couldn't hear the person, I did hard reset (thinking it was because of all the mods) but it wasn't. Then I took the speaker out again and did the same thing...but still doesn't work.
Any ideas guys? You think the speaker is just blown? I've only had the phone for 3 weeks. Any idea where I can buy a replacement speaker? (if you need a picture of the speaker, let me know and i'll post it)
Thanks for the help!
That happened to me... and it was because I was holding my Wing and a water bottle in the same hand, and apparently, I got some moisture in the speaker... and shortly after, the touchscreen stopped responding.. so I took it back and got a new one.
only thing i can suggest is if you figure out the part number for the speaker (either the HTC part number or the manufacturer part number) then search with that term on google and I am sure you will find atleast a few wholesalers and retailers from Hong Kong that sell that product. Did this on numerous occasions for lcds, antenae, and various parts for random electronics.
Did you try throwing it again?
yeah I did.
I guess the speaker is just blown. I went to a Cell Phone Repair place and they gave me a BlackJack speaker, its the same plugs but a little thicker, so theres a little bulge where the ear handset is.
How much did that cost ya?
hey guys my phone was having a slight problem with the ear piece speaker it would work properly but if i shook the phone a little ( such as walking) the sound would disappear , if i turned on the speaker phone the call was stil connected and if i again turned on the regular ear piece it wouldnt work unless i gave it another slight shake
This led me to belive tht the speaker might be slightly out of place and the contact werent touching properly so i ripped open my phone and dove thru its guts to get to the speaker (it was almost the last piece to come out damn it why couldnt it be easier to get out??) n on looking at it the 2 "prongs" that allow it to touch with the contacts on the flexi board were kind smooshed down so i gently pried them up and in the process was able to snap one off right at the base so theres no way to fix it
In short my wizard is an excellent pda now and an ok speaker phone but i still need the ear phone peice.
Im in NYC so if anyone knows where i can get it please help me cuz im getting alotta calls and no way to answer it with out using the speaker phoe which is annoying thanks for the help
Wizard earpiece
I have one from my old 8125. LMK if interested. I'm here in St. Louis, MO.
Definitely interested how much u want for it?
Hy guys.
I bought this nice HTC Magician and it has a little problem. Speaker at the back of case works very well( I can play music and all), but the small speaker at the front panel( above the screen) for answering the calls doesn't work... You can't hear anything...
When I turn ON Speaker(back side) I can hear the caller, but and everyone around me....
And I can also normaly use it when headset is on...
In the mobile service they said that they have changed front speaker and that problem is somewhere on the motherboard...
Is there any salvation for this...
Balcanian said:
Hy guys.
I bought this nice HTC Magician and it has a little problem. Speaker at the back of case works very well( I can play music and all), but the small speaker at the front panel( above the screen) for answering the calls doesn't work... You can't hear anything...
When I turn ON Speaker(back side) I can hear the caller, but and everyone around me....
And I can also normaly use it when headset is on...
In the mobile service they said that they have changed front speaker and that problem is somewhere on the motherboard...
Is there any salvation for this...
Click to expand...
Click to collapse
Assuming the service centre have changed the speaker for a good one, and they have cleaned the contacts on the motherboard, then they are most likely correct that it is a motherboard fault. Quite an unusual fault as normally earpiece speaker problems are either poor contact with the board or a faulty earpiece speaker.
If it is the motherboard, then a repair is not economic and could turn out to be impossible in some cases. Clearly the sound circuit is OK in as much as you get output using an earpiece. However, there could be an amplifier fault or a simple crack in the board connections. Without testing there is no way to know.
You could dismantle and check the connections (often the speaker has springy contacts that touch onto the motherboard). You can tweak them out a little and claen the motherboard contacts. BUT, if you trust the service centre then it would be a faint hope. If you don't trust the service centre (sometimes they give excuses because the job would take too much time for the amount they can charge - particularly on older devices), then you could dismantle (Always risky - unless you are familiar with this kind of thing - it could end up worse than when you start!!)
Mike
Mike, thank you very much...
I supposed that they probably didn't check everything as they should. Because hey're not officialy service or even to have experince with this devices. When servicer saw Magician he said " Oh this is complicated"... That's why I think that they even don't know how to fix the speaker or that they have put ther right one speaker. I didn't want to give them device to testing because I saw that they don't have experince as I said.
So I'm taking it, nesxt week, to service where I know that people are professionals...
I'll give feedback what i've done..