Hi all
I have a MDA compact which I wish to connect to my car stereo as a handsfree unit. I have an auxiliary input for my stereo.
Is it possible just to purchase a 2.5 to 3.5mm lead for this? I have a gut feeling the mic won't work - please help? Is it possible to buy such a lead with a built in mic?
Thanks
Carl
Hi, I used to have a XDAII which I connected to the auxillary port on my car stereo, just like you suggest. It worked perfectly. When using the phone, the caller's voice woudl come out of the car speakers and the mic was powerful enough to pick up my voice even though the unit was mounted on my windscreen.
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact. Sorry couldn't offer more advice on your particular device, but I hope my experiences help.
monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.
OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?
carlreader said:
OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?
Click to expand...
Click to collapse
Yes. 8)
OK - did some work on this.
I decided to cut the earplugs off of the supplied headset, and attach a 3.5mm socket.
I now have a custom XDA mini lead
All works, however volume from car stereo speakers is extremely low. Any ideas? (Yes, I have checked car volume, phone volume and headphone volume!)
Cheers
Carl
jackleung said:
monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.
Click to expand...
Click to collapse
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.
I found my mic was cancelled with the Mini, hence the custom cable.
hope this helps!
monster said:
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.
Click to expand...
Click to collapse
I think my adapter is just a standard 2.5mm to 3.5mm converter. I tried 2 different adapter (one from Radio shack and the other one from ebay: http://cgi.ebay.com/USB-CABLE-headp...ryZ15040QQssPageNameZWD1VQQrdZ1QQcmdZViewItem)
Both are working for me (I will try again today and confirm U tomorrow), therefore I think yr problem is in the exec hardware itself.
To Carl,
Yr setup will not work since yr supplied headset adapter has at least 4 connection on the plug compare to 3 on the standard one. The extra connection is for the mic. If U cut the wire like this:
<---- X --- mic+volumn control ------ ear plugs
Then U can no longer use the mic w/ the custom wire. But if U:
<------- mic+volumn control -- X ---- ear plugs
then the mic on yr mic+volumn control will pick up the voice
hi jackleung
Thanks for the reply - the lead was cut after the mic but before the earphones.
This was because a standard lead with a 2.5 / 3.5mm adaptor didnt work.
My only issue now is the low volume!
Cheers
Carl
I tried it on my Imate Jam again. My mic on the Jam still works (eg: Voice Command via Cyberon Voice Dial. So do phone conversation) even I use my 2.5mm/3.5mm adapter to connection it to my car stereo.
Hi,
I did the same for me and a friend of mine with a Univer..er - Jasjar and connected this to an FM transmitter - We have excellent sound quality, volume and the you can still answer calls by pressing the Mic Button
Frikkie
(If you are gonna be late - dont rush, else someone else and YOU will be cross)
check connections?
I have done exactly what you did, put a 3.5mm socket on the end of the included handsfree cable.. volume is fine, and i regularly connect it to the aux in the car, and multiple sets of headphone/speakers...
The best suggestion to your volume problem is to try again.. i know i had issue with the stereo channels getting screwed up (and even combined at one point) and it was just trial and error getting the connections clean..
You have to ensure that both the shaft and tip connectors on the socket are grounded to the shared ground on the circuit board.. otherwise the audio will probably be less than perfect.. check for dodgy soldering/connection.. coz i can assure you that your theory does work!
Dan
There is another topic on this here.
The person from there uses:
http://www.expansys-usa.com/product.asp?code=PPCPADPT02
which has two 3.5mm plugs.
Description: It has a 2.5mm plug at one end (this plugs into the PocketPC) and two 3.5mm sockets at the other end (into which you plug your 3.5mm headset or headphones).
My question was: could I put a standard 3.5 car kit mic into this 3.5 headset jack (the one with the mic)? Would the mic work if I plug it into a headset jack?
I assume the other one (headphones = stereo only) I will plug it directly into my car auxiliary via a 3.5mm to RCA cable, right?
I have an Audi A3, which has an AUX port to connect an MP3 player, so that it plays over the car radio/speakers. (FYI: The AUX port is wired into the CD changer of the Car radio).
I was wondering if a cable exists that can connect to the VARIO (tilt) into aux, so when the phone rings it plays through the speakers. Im hoping that the mic on the phone is good enough to pick up my voice which it sits in the cradle.
I could also use this link up to play mp3s on the tilt as well.
Get a 11-pin miniUSB male to 3.5mm male cable. Search on ebay or google.
you need something like this
http://www.pocketpctechs.com/main~unit~ATT_Tilt-974~area~view_cart~item~LSP-DUOPRO01.htm
fyi, if you just get a mini usb to 3.5mm plug, the mic on the phone will mute itself once you plug that 3.5mm adapter plug, so you can hear the caller but no matter how loud you scream, the other party won't be able to hear you.
I had the same idea before, tested it and it didn't work. That's why I had to order this adapter from ppctech.
Thanks for the replies, both are very helpful.
I purchased a 3.5mm adapter to listen at the gym. My first try was generic and I got no audio, this new set only gets one channel. I think it's got to do with a microphone.
Here's what I bought off ebay: 3.5mm USB AUDIO ADAPTER FOR HTC TYTN II 8925 MOGUL 6800
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=130239082614&ssPageName=STRK:MEFS:IT&ih=003
I'm running a cooked 6.1 Rom:
R 3.35.04
D 3.49
When you get no audio from the headphones (with your adapter), is the sound coming from your phone's speaker? Usually when those types of adapters aren't getting the sound through, it will come through the phone's speaker. You might want to try the HTC adapter that came with the phone with a 2.5MM phone stereo headset. The phone seems to be very sensitive with regard to audio coming through adapters and other types of headsets...
I have that one and it works just fine
What about registry settings? Would the BT Audio program that turns bluetooth to stereo do anything?
Heya,
Currently I have a 3 way splitter HTCusb -> Power (miniusb) | Audio (3.5mm) | HTC Headset Connection (HTCusb)
What I need is a microphone only 'headset' to go in the headset socket, as the audio is allready being passed to my car's speakers via the 3.5 jack.
Does anyone know if/where somthing like this exists? or should i buy a cheap headset and splice the earphones off?
Also anyone else find the fuze is unable to gain positive charge whilst on and connected to a 12v ciggaret adaptor, it still drains but at a slower rate, but I do not have an offical charger, which may be the problem.
+1
I also have my audio sent to my car speakers. But since the phone thinks I have a headset attached, the phone microphone is disabled. So when it rings, I have to undock it from the cradle and stick it to my ear. I'd love to have just a microphone mounted near the visor. Anyone know where I can find one?
Wouldn't this do as a workaround?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=169481
Plug into the HTC headset connection on your adapter, then you have a micropohone. Then plug the 3.5 jack into the end (instead of the headphones)
The large block adapter that came in the box works for me and allows me to use my car speakers w/ aux input and there is no problems with the microphone.
I had this problem with my tilt with the Y splitter adapter, however the multi adapter that comes in the fuze box works for me perfectly.
http://cgi.ebay.de/Audio-Adapter-3-...14&_trkparms=72:1229|66:2|65:12|39:1|240:1318
There will be the same offers on ebay in your country. Searchwords: HTC 3,5mm
Hello everybody!
I recently purchased some headphones that have a mic built in: found here
I was hoping that I could just plug them into my USB- 3.5mm adapter and they would work as headphone, and when a call comes in I could talk on the phone as well.
Unfortunately I found that they do not properly plug into the standard USB to 3.5mm adapter because the microphone makes a extra connection that my adapter dosn't have.
So I was wondering if there is a work around to this, Or preferably a adapter that would work with the headphones and mic combo.
Thanks for your help!
-El