Hello,
I have an imat jasjar and i performed a hard reset.
When the jasjar started to boot i could only see the backlight and nothing else
(I know this because when I turn off the backlight by using the on\off button the screen goes completely black )
after the jasjar finishes the boot I can hear sounds and the keyboard lights up when I click it but still no display
Thank you,
Assaf Avinoam
Seems like a hardware problem. Might be the coaxial cable loose or broken. Hopefully just loose. Goodluck
Related
Perhaps someone has an explanation why my backlight doesnt light up again when a button is pressed?
From time to time, the backlight goes dark and even though I am pressing buttons, screen, power button, etc, the backlight doesnt come back on. I have to search for the backlight adjuster (in the dark) in order to switch the light back on.
I have wisbar advanced and SpbPocketPlus installed - might that effect this somehow??
Thanks for any advice!
i have exactly the same problem and don´t know a solution. ;-(
Wisbar Advance 2.6.0.1 is installed, SpbPocketPlus not.
I think it comes more often if i use the camera, but it is not reproduceable...
I've never had this problem before, I dont have wisbar installed.
You may be doing a press and hold function on your device. Quick press of the power turns it off, a long press turns off the backlight. the only way to turn it back on is to long press the power button.
also you have settings that turns the back light screen off, which may be affecting this.
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Squuiid said:
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Click to expand...
Click to collapse
It hasnt happened lately (actually ever I posted this thread strangely enough) but its quite embarrassing when you have to find your way through a dark screen.
I put a large symbol of the brightness adjuster in one corner (using SpbPocketPlus), so I only have to find that symbol rather then start --> settings --> etc..... its not a cure but it makes it easier switching it back on.
If anyone has a remedy for this problem, please share...
Not sure why this happens, but I fixed it using...
http://www.ppc-welt.info/community/showpost.php?p=728080&postcount=27
This app - run on your prophet, and all is back to normal. Keep a copy on your SD card...
--Tosh
didn't help
I tried and still use the neo backlight fix. But this fix is only for forcing via startup a longer measured time for the light to stay on.
I too have suffered with the problem of the backlight not coming on every now and again after starting up the prophet. I've had this problem on numerous roms too which is interesting. What more interesting is that even in the days of my owning a Blue Angel (Orange M2000, MDA) I STILL remember having this intermittent problem with the light not always coming on. Only way I fixed it was to simply soft reset the device. Whenever I did that and when I do it now, it stops it happening for week or so at least.
I still use the neo back light fix too as my phone has the quick light turn off problem without it. Neo certainly created a good fix no mistaking.
All the best
Nicholas
i had the same problem...just put the same value to the standby and backlight ...( both 3 mins on mine)...and never happened again....i think it helps...
I have a strange backlight & power-off problem on my Qtek S200:
When the backlight is switched on and I press the Power button shortly to switch it to sleep mode, the screen gets blank but the backlight does not go off.
So now I wait first when the backlight timer goes off before switching the device to sleep mode manually.
Another problem:
When the power settings is set to switch the device off automatically, it reboots when the timer goes off. So my solution is to disable the auto power-off feature.
How to fix this to the original behaviour ?
I tried the neo_backlight_fix and set the backlight timeout to the same value as the standby timeout, but with no avail.
My Qtek S200 has still the original old ROM (G4 model) and Windows Mobile 5.0:
ROM version info:
IPL: 2.10.001
SPL: 2.10.001
GSM: 02.07.20
OS: 2.10.7.25
Please help me to solve the problem.
Maybe I messed up a lot and the only solution is to install a newer ROM which is available since some time at qtek.nl.
Thanks in advance.
I've got a weird problem with my Diamond and i can't figure out a solution. I think it's due to .net 3.5 but i am not sure.
When i plug in the factory handsfree ( wired ) i can't turn off my screen. The light fades to 20% but the screen doesn't turn off. This is killing my battery.
The only fix i could think of is starting WMP , hitting play, screen off and then plugging in my headphones. This seams to work. But it's not a real solution.
If someone can help.. I would greatly appreciate it.
Flash my last ROM, V3 23049 and your problems will disappear, read readme first.
OR
You can try to install DiamonTweak and set "3.2 Audio booster" from "Disabled (Default)" to "Enable"
Power button?
dark2y said:
I've got a weird problem with my Diamond and i can't figure out a solution. I think it's due to .net 3.5 but i am not sure.
When i plug in the factory handsfree ( wired ) i can't turn off my screen. The light fades to 20% but the screen doesn't turn off. This is killing my battery.
The only fix i could think of is starting WMP , hitting play, screen off and then plugging in my headphones. This seams to work. But it's not a real solution.
If someone can help.. I would greatly appreciate it.
Click to expand...
Click to collapse
... do you mean when you hit the power button, the screen stays on? My screen doesn't switch off automatically with the headphones in. I press the power button to turn the screen on and off
I diden't try to flash it because it would be the third time this month. I can't take another reinstall! I was hoping on a registry hack or a fix cab or something. I really don't think it's the ROM's fault.
Setting "3.2 Audio booster" to enabled didn't work.
grahamkdt said:
... do you mean when you hit the power button, the screen stays on? My screen doesn't switch off automatically with the headphones in. I press the power button to turn the screen on and off
Click to expand...
Click to collapse
My doesn't turn off for nothing. I press the power button and the light fades to half, but the screen isn't turning off. I have to unplug the headphones , press power, the plug them in again.
Fixed
I figure it out. I flashed with a ROM that dosen't include .net CF 3.5 . It worked and i don't have this problem anymore.
bogy16 you were right. Switching the ROM was the solution
I have had the Touch 3G for nearly a year now and for the last 3 months I have had this recurring problem which is fixed with a hard reset but will recur again after about 6 weeks. The symptoms are:
1. When turning on, the backlight dims just before the HTC flash screen and startup sound (when it says "Smart Mobility")
2. Touching the screen doesn't bring the backlight back on.
3. Pressing the power button doesn't turn the screen off from this dimmed state, but after pressing touching the screen will turn the backlight back on.
4. Pressing the power button again will now turn off the screen, but pressing it again won't turn the screen back on! If I call it from another phone, the vibrator goes on but it doesn't ring, the screen stays off and you can't answer the call. If you hang up on the other phone it keeps vibrating and you need to do a soft reset to stop it.
If I do a hard reset the symptoms are gone and reinstalling the exact same software doesn't cause the problems immediately but withing a month or so it happens again. All I did just prior to these problems was use TomTom a bit more than usual, but otherwise nothing different. I have used TaskManager to see if there is anything weird running in the background but it all looks fine. I have had a cursory look through the registry but also can't find anything?
Any advice would be appreciated.
pdiaz said:
I have had the Touch 3G for nearly a year now and for the last 3 months I have had this recurring problem which is fixed with a hard reset but will recur again after about 6 weeks. The symptoms are:
1. When turning on, the backlight dims just before the HTC flash screen and startup sound (when it says "Smart Mobility")
2. Touching the screen doesn't bring the backlight back on.
3. Pressing the power button doesn't turn the screen off from this dimmed state, but after pressing touching the screen will turn the backlight back on.
4. Pressing the power button again will now turn off the screen, but pressing it again won't turn the screen back on! If I call it from another phone, the vibrator goes on but it doesn't ring, the screen stays off and you can't answer the call. If you hang up on the other phone it keeps vibrating and you need to do a soft reset to stop it.
If I do a hard reset the symptoms are gone and reinstalling the exact same software doesn't cause the problems immediately but withing a month or so it happens again. All I did just prior to these problems was use TomTom a bit more than usual, but otherwise nothing different. I have used TaskManager to see if there is anything weird running in the background but it all looks fine. I have had a cursory look through the registry but also can't find anything?
Any advice would be appreciated.
Click to expand...
Click to collapse
Sounds like it's going all haywire. If you've had it less than a year, I'd send it in real quick. Sounds more like a hardware problem.
I don't think it is hardware as a hard reset fixes it...it just recurs down the track. I have done a hardrest and reinstalled all my apps and it is working great again but I was wondering if I should be checking somewhere in the registry for an aberrant setting. I am u using a backup image program so at least when it happen again I an restore my system more simply.
But then again, all the symptoms you mentioned point to a hardware defect. You could try to find a tweak, but like all electronic devices, it's the luck of the draw. Try emailing HTC and see what they say.
Hello,
I have a Wizard g4 with hard SPL and this weekend it decided to go crazy. Here is the problem:
- When I turn it on, the screen goes white, blue and orange LEDs are lit and the device vibrates non stop. The camera white led is also lit.
- The only way to turn it off again is removing the battery. reset is useless.
- I try to put it on bootloader mode using the camera+reset and nothing happens
- Trying to turn it on with camera pressed also doesn't work
- Trying to turn it on with voice+network pressed doesn't work either
- When I connect it to charger or USB, it automatically does de same (white screen, etc) described above
I've been using Hornet win 6.1 ROM for some time and was very happy with it.
Is there any hope or am I effed?
Seriously? Nothing?
Diamened said:
Seriously? Nothing?
Click to expand...
Click to collapse
You don't say anything about doing a hardreset. Did you try it?
Hi, first of all this is my first thread, i hope you guys can help me. Sorry for bad english
I own a S5 G-900F. The phone was working fine until the screen started sometimes, ramdomly to turn black (with ramdom pixels in colours inside) like 5 seconds, then turns off and the phone restarts. This can happen 1-2 times a day while im browsing or doing anything, or even when i turn the screen on to unlock the phone, it turns on and this happens.
I think its a battery problem, it has 2 years and it might be giving low voltage (i have no idea), or maybe a motherboard problem? some water entered inside the case but im not sure.
Another thing i have to say, the "back" button works, as the menu button, but the "back" button has no light. This is weird and i think its related to the water problem. Both buttons work good, but the back button sometimes doesnt light up.
Thank you for the help