Hi,
On my Hermes, I can not connect to GPRS after disconnecting it.
I figured out that if I "turn off" phone and then "on" I can connect to GPRS.
But if I don't do that I get a message like "end the current phone call first"
Is there a way to fix this problem ?
Btw, I have upgraded my radio firmware to the latest firmware (1.27.00.00)when I purchased this phone, and I am not sure if this problem was existing before the radio upgrade.
any idea about this problem ?
no one has seen it before ?
Related
Hi all!
I have installed the WidComm stack, but since then I cannot use my i-mate as a GPRS Dial-Up Modem. When I select Dial-Up from the Bluetooth devices, after some seconds it pops up a window where I can enter my username, password and the number to be dialed. But when I press Dial, nothing more happens, just a window pops up saying "Dialing *99#..." but then I get an error message "Error 692: There was a hardware failure in the modem...".
I tried it with and without Hardware flow control etc., with and without AT command +cdgcont=1,"IP","internet",0,0 still no success.
On the other hand my old MS Stack lost its SSA profile somehow, so I cannot connect through that one either anymore.
Since noone is saying anything about this issue, I assume everybody is happy and has it working, am I right? :wink:
Any ideas? :?: Please help, I need it badly... :?
Kristof
I have the exact same problem. Have you found the solution?
I think it's caused by the widcomm stack that was extracted from a non phone-edition ppc (which of course cannot be used as a modem). maybe the extracted stack from a hp 6300 works?
Funny thing is I also can't connect via IR.
l did a hard reset & voila, I can use my xda2 as a wireless bluetooth gprs modem again.
Putra,
really ? after a new format u were able to connect using GPRS and USB without any problems ?
I' have the same problem with my i-mate k-jam latest WWE rom...
Error 692: There was a hardware failure in the modem !!!
And the connection were dropped down...
Maybe could be the SPB GPRS Monitor program ?
I've disabled all possible thing related to ActiveSync and Usb connection , either on pc and my k-jam....
I'm goin' to be crazy !!!
Only one time i was able to connect for up to 2 minute, without any problems... and then, after i've tried again to estabilish a new connection, i won't be able... it sais Error 892.... !!!
Anyone Could Help me ?
Thanks a lot in advance...
Raid.
sorry...
Sorry there, but it was so long ago, I cannot even remember what I did.
I have upgraded to the Prophet since Jan, and no longer using the Xda2... it's now my backup in case something happens to my Prophet.
The Bluetooth connection works fine... but sometimes the modem still "hang" and i got Error 692 or TCP Error 743... it seems that the major problems are caused by the ActiveSync, when i disable the USB connection either on my phone and on my laptop everything goes fine...
With the USB connection....no way at all ! After 2 minutes the connection is terminated.... even if i've disabled ActiveSync USB connection...
Hope this helps....
Alessio.
Nothing to do....
Also using BT stack (Microsoft) after few minutes my wireless modem seems still connected, but i cannot send/receive packets over the internet.
It seems like frozen !!!
And after i've clicked the "Disconnect" through the dialup connection icon on my task bar, my wireless modem doesn't respond anymore... i need to reset my device and sometimes this doesn't works at all, Windows stop responding while i'm trying to open the "Network Connections" panel... after the timeout completed and the dialup is disconnected i can open it again !
What's the problem !?
I'm downloading the new Dell BT stack for my laptop... i'll update you again...
I cannot figure the problem is my device... i can surf with opera beta for WM5 without any problems !!!
I solved the problem....
I've upgraded my MS BT stack with the Dell BT stack new update (Latitude D410).
Everything seems working fine now, i can stay connected above 15 minutes now... in this moment i'm writing throught my EDGE connection
I cannot use the USB modem... after 2 minutes i cannot send/receive packets anymore... i've disabled ActiveSync either on phone and laptop !
Some one could help with the USB and my Wizard?
Thanks.
A.
Hello,
After performing a hard reset on my XDA Exec I used the various posts within the forum to set-up the machine. Of course one of the thinks I have set up as been the "My ISP" and "My Work Network" section to connect to the Internet via 3G. I also implemented the registry mod to have my 3G/GPRS connection always up.
Now here comes the problem bit ....
After a soft reset the 3G connection automatically comes up and am able to sync with the exchange server and surf the web. All seems fine. However after syncing with the USB cable, manually disconnecting the 3G connection or a making/receiving a phone conversation I am no longer able to connect to the net. Neither My ISP or My Work Network works any more. The error message I get is "No modem at above number...." I have double checked my connection setting and they all seem fine. Am at a loss to explain this.
Any thoughts?
TIA
Hi,
did you solve the problem. I have the same problem with my MDA Pro. When I change from wifi to gprs or modem I get the same error message. I have to turn off the telephone and back on and then it will work. This is really bad. Friends of mine at work have the same problem.
Any ideas?
Holger
Hello,
hmartin said:
...did you solve the problem. ...Holger
Click to expand...
Click to collapse
Sorry, no. Did not manage to fix it. I eventually returned the exec back to O2. Think I'll give it a couple more months while I do a bit more research and then re-upgrade to it again.
Regards
Hi guys,
I'm all new to your forum...
I have the o2 xdII, xdaIIs and now i'm using the xda Exec.
I have a strange problem that even o2 technical support team can't fix...
When i start internet explorer it will connect to either gprs or 3g (whatever is available). when i finish browsing the internet, i just close internet explorer and then close the connection by clicking the disconnect button. Where my problem is, is when i want to reconnect to the internet again (say 5 mins after i close the last connection), i cant get any connection whatsoever. I have a good receiption (gprs and 3g). And i have this weird message :
Dialed: mobile.o2.co.uk
The answering modem has disconnected. To check your connection settings and change them if needed, tap Settings.
So after a lot of talking with o2, i still have this problem.
I have tried to uprgrade to the new rom, and nothing, i have change the settings of the cennection, still nothing. i even changed the handset as i and o2 thought it could have been a faulty handset, but still nothing...
The only solution at the present is to do a soft reset everytime i want to connect to the internet... Its very annoying !!!!
Would annyone have a solution ??? Please ?????
Thank you in advance for your help....
Personally; I wouldn't suggest closing the connection and you won't get charged any extra.
this is easy to fix, but you will lose some software you've got installed.
I had this problem and have worked it out to be conflicts between software that handles the phone line. I had mortring, phonealarm and photo contacts pro installed and my gprs would not reconnect after the 2nd attempt. Putting the phone into flight mode and then back into normal mode would allow gprs to reconnect but only once.
So I uninstalled the above 3 applications one by one and found the gprs would reconnect great with only one installed (any one it didn't matter)
So try removing software that handles the phone line until your gprs reconnect works.
Daz
Hi,
I have a trinity updated to WM6.1 and radio version 1.38.00.11
I normally use push for my mails, calendar etc, but after the latest rom/radio update, I have noticed that I do not get all the updated I expects to get.
the network indicator icon in the upper panel shows that I am connected to the network, but in ActiveSync the status says "waiting for network". I have to disconnect the network and then reconnect in order to get activesync to work. After some time (from 1min to several hours) I suddenly have the same problem again. Does anyone know what can cause this? is it the radio software that is broken?
Hi, I've some problem with wifi connections. I own a lynksis wag54g2 wifi router. I can establish a connection, but after some times (it's not standard, it may vary), my device disconnect from the router and it's not able to reconnect. All that i can do is plug off my router (i take off the ac adapter) and when it's up again my phone can connect. it's very frustating, but i don't know what to do? i've tried setting something in wifi preferences' on my phone but nothing change. i've also flashed my firmware to the new one, hoping that it could fix that problem, but it didn't. someone could help me?
you can update the firmware to a newer one. this would fix your problem.
forum.xda-developers.com/showthread.php?t=781149
Hello.
I have a problem with WIFI on Galaxy 5 (i5500)(Europa) too. They have already changed my phone with new one, but the issue remains. So, for the second time now, I was able to connect my phone to my router for the first time, but after the first interruption or disconnection of WIFI I could not access to wifi anymore.
When I enable wifi in the phone starts ''connecting'' but then reports ''interrupted'' eventhough the signal is recognised as strong.
Firmwire version is the latest available. Router is encrypted with WPA2. Also I can access to router with my HTC Tattoo (Click).
Does anyone know the solution?
I have a decision to make(today), becouse If there is no solution to this I will change to another phone as I still can (Galaxy Spica).
Advise please.
Thanks a lot
What router do you have? have you tried with any other wifi network? i said that because my have this problem only with my router, and not for example with my girlfriend's one.
I found a little fix for my router, linksys wag54g2: open up the config page (192.168.1.1), go for wireless tab, select protection page and click on save settings. that reload the router and my phone is able to connect again.
Hi.
Thanks for your advice. There is some problem with router.. When I restart router the wifi on the phone works until swiched off or interruption becouse being out of range. When I try to connect to wifi again does not work unless I restart router again. ..catchy.. Interfering with mobile connection also makes the drop of wireless connection on my computer, so I need to restart router. I don't know the permanent solution. If anyone has any idea how repair this forever please let me know.
Best,
Thanks
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
I have just read similar post on another thread and replied find it here
I ahvent installed anything, perhaps its to do with the handset if its locked to a particular carrier? just a guess and a question...
cheers
helper
try to use static ip!!
CaptainTim said:
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
Click to expand...
Click to collapse
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
HeiDuDer said:
try to use static ip!!
Click to expand...
Click to collapse
Didn't work :/
Super1285 said:
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
Click to expand...
Click to collapse
Didn't work neither.
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
htc tattoo
hellllllllllllllllllllllllllllllllllllllllllllllll llllllllp hellllllllllllllllllllllllllllllp
heeeeeeeeeeelp
helppppppppppppppppppp
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times>>>>>>>>>>>>>>